Pasar al contenido principal

INESTABILIDAD HIDROMECANICA EN SUELOS: DETECCION Y EVALUACION

BIA2017-84752-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Linking shape and rotation of grains during triaxial compression of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Andò, Edward
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Viggiani, Gioacchino
The final publication is available at Springer via http://dx.doi.org/10.1007/s10035-020-01058-2, Particle shape has a strong effect on the mechanical response of coarse soils. This has been usually observed examining specimen-scale or engineering-scale responses, which are the sum of many microscale interactions. In this work we observe the effects of particle shape directly at the microscale level. X-ray tomography (µ-CT) of two sand specimens is exploited to measure three-dimensional particle shape descriptors but also to track individual particle motions during triaxial compression. A discrete digital volume correlation algorithm is employed to track the motion of individual grains (around 50,000 for each sand specimen) during the test and measure, with good precision, their cumulated displacements and rotations. The specimens examined failed in a clearly localised shear mode. Advantage is taken of this to obtain data relevant for very different kinematical regimes: one uniform and more constrained and the other close to critical state. A direct comparison between the shape and kinematic databases shows to what degree particle shape descriptors are related to observed kinematics. It appears that true sphericity is a good predictor of upper bound rotational restraint., The work here described has been supported by the Spanish Ministry of Economy through Grants BIA2014-59467-R and BIA2017-84752-R. Laboratoire 3SR is part of the LabEx Tec21 (Investissements d’Avenir - Grant Agreement nANR-11-LABX-0030)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Standard penetration testing in a virtual calibration chamber

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Butlanska, Joanna
The virtual calibration chamber technique, based on the discrete element method, is here applied to study the standard penetration test (SPT). A macro-element approach is used to represent a rod driven with an impact like those applied to perform SPT. The rod is driven into a chamber filled with a scaled discrete analogue of a quartz sand. The contact properties of the discrete analogue are calibrated simulating two low-pressure triaxial tests. The rod is driven changing input energy and controlling initial density and confinement stress. Energy-based blowcount normalization is shown to be effective. Results obtained are in good quantitative agreement with well-accepted experimentally-based relations between blowcount, density and overburden. It is also shown that the tip resistance measured under impact dynamic penetration conditions is close to that under constant velocity conditions, hence supporting recent proposals to relate CPT and SPT results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

G-PFEM numerical assessment of screw pile undrained capacity

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
This contribution describes a preliminary parametric analysis of the factors affecting the pull-out resistance of screw-piles in undrained conditions. The numerical simulations rely on the Particle Finite Element method, a method known for its capabilities to tackle large deformations and rapid changing boundaries at large strains. A total stress analysis-assuming a quasi-incompressible elastic model along with a Tresca plastic model-is used to simulate the clayey soil behavior. Contact constraints are imposed to the solution with a penalty approach. As a first step, a two-dimensional geometry is used and the pile resistance to pullout and penetration is assessed.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

G-PFEM: an open access numerical tool for the simulation of spudcan penetration in clays, G-PFEM: un outil numérique en libre accès pour la simulation de la pénétration de spudcan dans les argiles

  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Dilberoglu, Emre
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Penetration depth of Spudcan foundations for offshore mobile Jack-up rigs is typically predicted by considering a wished-in-place foundation at different depths and following traditional bearing capacity approaches. However, the large penetration depths involved, stress redistributions and the flow of the material around the spudcan are some example of features which make the wished-in-place assumption quite unrealistic. This paper presents an open access application package developed to simulate and hence predict load penetration curves of spudcan installation in multi-layered clay profiles. The numerical tool adopts the recently developed particle finite element method for geotechnical applications (G-PFEM). The potential of this large strain particle finite element application is demonstrated by simulating field data from the literature. The results show that load-penetration curves obtained using G-PFEM capture more efficiently the field results with respect to other numerical and analytical methods. It is also shown how the G-PFEM automatically captures cavity infill. In the paper the computational cost for the simulation of penetration up to 40m on a standard desktop are shown to be low compared to other commercial software., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Measuring traffic lane-changing by converting video into space–time still images

  • Sala Sanmartí, Marcel|||0000-0002-4576-9142
  • Soriguera Martí, Francesc|||0000-0002-0977-9781
  • Huillca, Kevin
  • Vilaplana Besler, Verónica|||0000-0001-6924-9961
Empirical data is needed in order to extend our knowledge of traffic behavior. Video recordings are used to enrich typical data from loop detectors. In this context, data extraction from videos becomes a challenging task. Setting automatic video processing systems is costly, complex, and the accuracy achieved is usually not enough to improve traffic flow models. In contrast “visual” data extraction by watching the recordings requires extensive human intervention. A semiautomatic video processing methodology to count lane-changing in freeways is proposed. The method allows counting lane changes faster than with the visual procedure without falling into the complexities and errors of full automation. The method is based on converting the video into a set of space–time still images, from where to visually count. This methodology has been tested at several freeway locations near Barcelona (Spain) with good results. A user-friendly implementation of the method is available on http://bit.ly/2yUi08M., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Geotechnical particle finite element method for modeling of soil-structure interaction under large deformation conditions

  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Monforte Vila, Lluís
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
The possibilities of the particle finite element method (PFEM) for modeling geotechnical problems are increasingly evident. PFEM is a numerical approach to solve large displacement and large strain continuum problems that are beyond the capabilities of classical finite element method (FEM). In PFEM, the computational domain is reconfigured for optimal solution by frequent remeshing and boundary updating. PFEM inherits many concepts, such as a Lagrangian description of continuum, from classic geomechanical FEM. This familiarity with more popular numerical methods facilitates learning and application. This work focuses on G-PFEM, a code specifically developed for the use of PFEM in geotechnical problems. The article has two purposes. The first is to give the reader an overview of the capabilities and main features of the current version of the G-PFEM and the second is to illustrate some of the newer developments of the code. G-PFEM can solve coupled hydro-mechanical static and dynamic problems involving the interaction of solid and/or deformable bodies. Realistic constitutive models for geomaterials are available, including features, such as structure and destructuration, which result in brittle response. The solutions are robust, solidly underpinned by numerical technology including mixed-field formulations, robust and mesh-independent integration of elastoplastic constitutive models and a rigorous and flexible treatment of contact interactions. The novel features presented in this work include the contact domain technique, a natural way to capture contact interactions and impose contact constraints between different continuum bodies, as well as a new simplified formulation for dynamic impact problems. The code performance is showcased by the simulation of several soil-structure interaction problems selected to highlight the novel code features: a rigid footing insertion in soft rock, pipeline insertion and subsequent lateral displacement on over-consolidated clay, screw-pile pull-out and the dynamic impact of a free-falling spherical penetrometer into clay., The authors acknowledge financial support by Severo Ochoa Centre of Excellence (2019–2023) Grant No. CEX2018-000797-S funded by MCIN/AEI/10.13039/501100011033 and research projects BIA2017-84752-R and PID2020-119598RB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Static & dynamic probing of rough breakable sands, Sondage statique et dynamique des sables cassants rugueux

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
Both static and dynamic penetration tests are widely used to conduct soil investigation practice. Particle crushability has been known to greatly affect the responses of penetration tests. On the other hand, the physical property of granular materials – surface roughness – exhibits considerable influence on crushability. The virtual calibration chamber (VCC) technique, based on the Discrete Element Method (DEM), is used to investigate the effect of particle crushability and roughness on both static and dynamic penetration test responses. In static tests particle crushing reduces tip resistance, and roughness enhances this effect as rough particles crush more than smooth ones. The main effects of roughness and crushability on dynamic responses lie in the track of dynamic penetrograms. The analysis confirms a good correlation between an equivalent dynamic resistance and the static tip resistance., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hydraulic conductivity from piezocone on-the-fly: a numerical evaluation

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Permeability is important in many geotechnical applications. The current CPTu practice to obtain permeability values relies on dissipation tests, which are frequently slow and only linked to permeability through compressibility measures. On-the-fly methods offer an alternative approach in which permeability is directly linked to CPTu penetration measurements. Several on-the-fly methods have been proposed and their applicability and relative advantages are not fully clear. Numerical effective stress simulation of CPTu testing is used here to explore in a simplified but realistic setting the relative merits of different on-the-fly methods. It is found that for partly drained materials the original simpler relation between cone metrics and normalized permeability works reasonably well. A continuous generalization of Elsworth and Lee method to the full permeability range is proposed, noting the connection to the backbone normalized pore pressure curve that describes the partly drained transition of cone penetration. The importance of an undrained limit beyond which the method produces large errors is stressed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy balance analyses during Standard Penetration Tests in a virtual calibration chamber

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Gens Solé, Antonio|||0000-0001-7588-7054
The Standard Penetration Test (SPT) is the most popular example of dynamic probing, a large category of soil testing techniques. Understanding and interpretation of these tests is hampered by the difficulties of reproducing them under controlled laboratory conditions. The virtual calibration chamber technique, based on the Discrete Element Method (DEM), may supplement or substitute this complex experimentation. In this paper SPT in sand are analyzed considering the energy transfer involved. Energy balances are written for the penetrating rod and for the material in the chamber. All the terms are computed for a number of cases in which the main variables controlling test response in the field -initial density and stress level- are systematically varied. The analysis confirms previous field observations indicating that, when an energy-based interpretation is used, SPT provides a value of equivalent penetration resistance that is the same that would be obtained with a static cone penetration test. The analyses also provide an unequivocal explanation for this observation: although the impacting rod shows complicated dynamics the response of the sand is quasi-static., The first author was supported by a CSC grant. This work was partly supported by the Ministry of 486 Science and Innovation of Spain through the research grant BIA2017-84752-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A contact model for rough crushable sand

  • Zhang, Ningning
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
Sand roughness is now accessible to measurement. Incorporating this parameter into sand models using the discrete element method (DEM) is known to improve bulk small strain response. In this work we explore the effect on problems where particle crushing takes place. A well-established DEM particle crushing model and a rough Hertzian contact model are here combined to incorporate both effects in a single contact model. Including contact roughness results in stronger particles whilst all other material parameters being equal. The model is then used to simulate high pressure oedometric compression tests on a strong silica sand. It is shown that including realistic values of surface roughness enables to correctly capture both load-unload behaviour and particle size distribution evolution while using realistic values of elastic bulk properties for the sand grains. Roughness is then a model refinement that may result in simpler, more objective DEM calibrations., This work was partly supported by the Ministry of Science and Innovation of Spain through the research grant BIA2017-84752-R and by the EPCC-CIRRUS Scottish Academic Access sc019-EPCC-CIRRUS project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A stable mesh-independent approach for numerical modelling of structured soils at large strains

  • Monforte Vila, Lluís
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
We describe the large strain implementation of an elasto-plastic model for structured soils into G-PFEM, a code developed for geotechnical simulations using the Particle Finite Element Method. The constitutive model is appropriate for naturally structured clays, cement-improved soils and soft rocks. Structure may result in brittle behavior even in contractive paths; as a result, localized failure modes are expected in most applications. To avoid the pathological mesh-dependence that may accompany strain localization, a nonlocal reformulation of the model is employed. The resulting constitutive model is incorporated into a numerical code by means of a local explicit stress integration technique. To ensure computability this is hosted within a more general Implicit-Explicit integration scheme (IMPLEX). The good performance of these techniques is illustrated by means of element tests and boundary value problems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Application of a bonded critical state model to design tunnel support for rockmass bulking

  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Kaiser, P. K.
Gabion-type support is a favoured option to restrain bulking in pillar walls of mine footprint tunnels. It uses closely spaced short reinforcements in tunnel walls (typically fully grouted rebar) in combination with surface support (rock fragment retention systems such as shotcrete, weld wire mesh, straps, etc.). The system is installed while the rock is still mostly intact and is conceived to maintain support capacity even when, the rock attains a fully fragmented state, acting then like a gabion or earth-reinforced type retaining wall. In this paper the interaction between the support system and the highly stressed pillar walls is investigated numerically by means of finite element analyses within the framework of displacement-based design. Because the material response should capture the passage from intact rock to fully fragmented state, an advanced elasto-plastic bonded constitutive model was adopted as a simulation framework. The model is calibrated to replicate the mechanical behaviour of Bursnip Sandstone and Amarelo Pais Granite. These two rocks were selected because of high quality triaxial tests results from the literature. After showing the good performance of the model to reproduce both low and high pressure triaxial compression behaviour an extensive parametric study investigating the effects of bolt types on gabion response is presented., This work was partly supported by the Ministry of Science and Innovation of Spain through the research grant BIA2017-84752-R
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sphericity measures of sand grains

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Andò, Edward
  • Gens Solé, Antonio|||0000-0001-7588-7054
The sphericity of a grain should measure the similitude of its shape with that of a sphere. Sphericity is a shape descriptor of long-standing interest for sedimentology. Now it has gained also interest to facilitate discrete element modelling of granular materials. True sphericity was initially defined by a surface ratio that requires three-dimensional (3D) grain surface measurement. That kind of measurement has been practically impossible until recently and, as a consequence, a number of alternative 3D measures and 2D proxies were proposed. In this work we present results from a study of grain shape based on x-ray tomography of two different sand specimens, containing more than 110.000 particles altogether. Sphericity measures were systematically obtained for all grains. 2D proxy measures were also obtained in samples of oriented and not-oriented grains. It is shown that the 2D proxy best correlated with true sphericity is perimeter sphericity, whereas the traditional Krumbein-Sloss chart proxy is poorly correlated. 2D measures acquired through minor axis projection are more closely related to 3D measures than those acquired using random projections., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Micromechanical inspection of incremental behaviour of crushable soils

  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • O'Sullivan, Catherine
  • Gens Solé, Antonio|||0000-0001-7588-7054
In granular soils grain crushing reduces dilatancy and stress obliquity enhances crushability. These are well-supported specimen-scale experimental observations. In principle, those observations should reflect some peculiar micromechanism associated with crushing, but which is it? To answer that question the nature of crushing-induced particle-scale interactions is here investigated using an efficient DEM model of crushable soil. Microstructural measures such as the mechanical coordination number and fabric are examined while performing systematic stress probing on the triaxial plane. Numerical techniques such as parallel and the newly introduced sequential probing enable clear separation of the micromechanical mechanisms associated with crushing. Particle crushing is shown to reduce fabric anisotropy during incremental loading and to slow fabric change during continuous shearing. On the other hand, increased fabric anisotropy does take more particles closer to breakage. Shear-enhanced breakage appears then to be a natural consequence of shear-enhanced fabric anisotropy. The particle crushing model employed here makes crushing dependent only on particle and contact properties, without any pre-established influence of particle connectivity. That influence does not emerge, and it is shown how particle connectivity, per se, is not a good indicator of crushing likelihood., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A new approach to evaluate the soil disturbance due to tube sampling, Une nouvelle approche pour évaluer les effets d’altération dues à l'échantillonnage

  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Disturbance of specimens recovered by tube sampling from boreholes is an enduring relevant problem in geotechnical engineering. Practice has evolved slowly in this area, partly because the main research method applied, involving comparative field sampling and testing, remains strictly empirical. Theoretical approaches based on the strain path method (SPM) have been applied, that idealize the problem as one of steady ideal fluid motion, which is an unrealistic premise. A novel numerical technology, the Particle Finite Element method, is here applied to simulate smooth tube sampling using a conventional elasto-plastic Tresca model for the undrained soil. The results obtained are used to quantify the qualitative insight gained by field experimentation. It is shown that sample straining is proportional to the tube area ratio. The coefficient of proportionality is named here as the Hvorslev fraction. It is shown that the Hvorslev fraction is dependent on end-tube bevel and on the presence of a stationary piston. Furthermore, it is also shown that the contribution of these two features is independent of one another. The approach described represents an advance towards a soil mechanics-based rational approach to soil sampling., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large-strain analysis of undrained smooth tube sampling

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Gens Solé, Antonio|||0000-0001-7588-7054
Borehole tube sampling is a key process of geotechnical engineering. The paper presents numerical analyses of smooth tube sampling in clay using the Particle Finite Element Method (PFEM). The soil is described by a conventional elasto-plastic constitutive model (Tresca plasticity and a quasi-incompressible elastic law). The sampler is advanced by several diameters into the soil until a steady state is observed. The elasto-plastic numerical solution for a round-tipped sampler clearly identifies a localized shear failure mechanism at the entrance of the tube. Relevant Strain Path Method (SPM) solutions are numerically evaluated to facilitate full field comparison. For a given thickness ratio elasto-plastic simulation predicts far less compression but much larger extensions at the centerline than SPM. The results also show how including a beveled sampler tip or a stationary piston changes the failure mechanism and significantly reduces induced peak extension strains. The results agree with available experimental data and well-established empirical observations. The methodology presented may open the way to a soil mechanics based rational approach to soil sampling simulation., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The third author acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the "Severo Ochoa Programme for Centres of Excellence in R&D" (CEX2018-000797-S), Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A new approach to evaluate the soil disturbance due to tube sampling, Une nouvelle approche pour évaluer les effets d’altération dues à l'échantillonnage

  • Gens Solé, Antonio
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Carbonell Puigbó, Josep Maria
Disturbance of specimens recovered by tube sampling from boreholes is an enduring relevant problem in geotechnical engineering. Practice has evolved slowly in this area, partly because the main research method applied, involving comparative field sampling and testing, remains strictly empirical. Theoretical approaches based on the strain path method (SPM) have been applied, that idealize the problem as one of steady ideal fluid motion, which is an unrealistic premise. A novel numerical technology, the Particle Finite Element method, is here applied to simulate smooth tube sampling using a conventional elasto-plastic Tresca model for the undrained soil. The results obtained are used to quantify the qualitative insight gained by field experimentation. It is shown that sample straining is proportional to the tube area ratio. The coefficient of proportionality is named here as the Hvorslev fraction. It is shown that the Hvorslev fraction is dependent on end-tube bevel and on the presence of a stationary piston. Furthermore, it is also shown that the contribution of these two features is independent of one another. The approach described represents an advance towards a soil mechanics-based rational approach to soil sampling., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Micromechanical inspection of incremental behaviour of crushable soils

  • Ciantia, Matteo Oryem
  • Arroyo Álvarez de Toledo, Marcos
  • O'Sullivan, Catherine
  • Gens Solé, Antonio
In granular soils grain crushing reduces dilatancy and stress obliquity enhances crushability. These are well-supported specimen-scale experimental observations. In principle, those observations should reflect some peculiar micromechanism associated with crushing, but which is it? To answer that question the nature of crushing-induced particle-scale interactions is here investigated using an efficient DEM model of crushable soil. Microstructural measures such as the mechanical coordination number and fabric are examined while performing systematic stress probing on the triaxial plane. Numerical techniques such as parallel and the newly introduced sequential probing enable clear separation of the micromechanical mechanisms associated with crushing. Particle crushing is shown to reduce fabric anisotropy during incremental loading and to slow fabric change during continuous shearing. On the other hand, increased fabric anisotropy does take more particles closer to breakage. Shear-enhanced breakage appears then to be a natural consequence of shear-enhanced fabric anisotropy. The particle crushing model employed here makes crushing dependent only on particle and contact properties, without any pre-established influence of particle connectivity. That influence does not emerge, and it is shown how particle connectivity, per se, is not a good indicator of crushing likelihood., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Geotechnical particle finite element method for modeling of soil-structure interaction under large deformation conditions

  • Carbonell Puigbó, Josep Maria
  • Monforte Vila, Lluís
  • Ciantia, Matteo Oryem
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
The possibilities of the particle finite element method (PFEM) for modeling geotechnical problems are increasingly evident. PFEM is a numerical approach to solve large displacement and large strain continuum problems that are beyond the capabilities of classical finite element method (FEM). In PFEM, the computational domain is reconfigured for optimal solution by frequent remeshing and boundary updating. PFEM inherits many concepts, such as a Lagrangian description of continuum, from classic geomechanical FEM. This familiarity with more popular numerical methods facilitates learning and application. This work focuses on G-PFEM, a code specifically developed for the use of PFEM in geotechnical problems. The article has two purposes. The first is to give the reader an overview of the capabilities and main features of the current version of the G-PFEM and the second is to illustrate some of the newer developments of the code. G-PFEM can solve coupled hydro-mechanical static and dynamic problems involving the interaction of solid and/or deformable bodies. Realistic constitutive models for geomaterials are available, including features, such as structure and destructuration, which result in brittle response. The solutions are robust, solidly underpinned by numerical technology including mixed-field formulations, robust and mesh-independent integration of elastoplastic constitutive models and a rigorous and flexible treatment of contact interactions. The novel features presented in this work include the contact domain technique, a natural way to capture contact interactions and impose contact constraints between different continuum bodies, as well as a new simplified formulation for dynamic impact problems. The code performance is showcased by the simulation of several soil-structure interaction problems selected to highlight the novel code features: a rigid footing insertion in soft rock, pipeline insertion and subsequent lateral displacement on over-consolidated clay, screw-pile pull-out and the dynamic impact of a free-falling spherical penetrometer into clay., The authors acknowledge financial support by Severo Ochoa Centre of Excellence (2019–2023) Grant No. CEX2018-000797-S funded by MCIN/AEI/10.13039/501100011033 and research projects BIA2017-84752-R and PID2020-119598RB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

G-PFEM numerical assessment of screw pile undrained capacity

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Ciantia, Matteo Oryem
This contribution describes a preliminary parametric analysis of the factors affecting the pull-out resistance of screw-piles in undrained conditions. The numerical simulations rely on the Particle Finite Element method, a method known for its capabilities to tackle large deformations and rapid changing boundaries at large strains. A total stress analysis-assuming a quasi-incompressible elastic model along with a Tresca plastic model-is used to simulate the clayey soil behavior. Contact constraints are imposed to the solution with a penalty approach. As a first step, a two-dimensional geometry is used and the pile resistance to pullout and penetration is assessed., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Standard penetration testing in a virtual calibration chamber

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Gens Solé, Antonio
  • Butlanska, Joanna
The virtual calibration chamber technique, based on the discrete element method, is here applied to study the standard penetration test (SPT). A macro-element approach is used to represent a rod driven with an impact like those applied to perform SPT. The rod is driven into a chamber filled with a scaled discrete analogue of a quartz sand. The contact properties of the discrete analogue are calibrated simulating two low-pressure triaxial tests. The rod is driven changing input energy and controlling initial density and confinement stress. Energy-based blowcount normalization is shown to be effective. Results obtained are in good quantitative agreement with well-accepted experimentally-based relations between blowcount, density and overburden. It is also shown that the tip resistance measured under impact dynamic penetration conditions is close to that under constant velocity conditions, hence supporting recent proposals to relate CPT and SPT results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Linking shape and rotation of grains during triaxial compression of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos
  • Andò, Edward
  • Gens Solé, Antonio
  • Viggiani, Gioacchino
The final publication is available at Springer via http://dx.doi.org/10.1007/s10035-020-01058-2, Particle shape has a strong effect on the mechanical response of coarse soils. This has been usually observed examining specimen-scale or engineering-scale responses, which are the sum of many microscale interactions. In this work we observe the effects of particle shape directly at the microscale level. X-ray tomography (µ-CT) of two sand specimens is exploited to measure three-dimensional particle shape descriptors but also to track individual particle motions during triaxial compression. A discrete digital volume correlation algorithm is employed to track the motion of individual grains (around 50,000 for each sand specimen) during the test and measure, with good precision, their cumulated displacements and rotations. The specimens examined failed in a clearly localised shear mode. Advantage is taken of this to obtain data relevant for very different kinematical regimes: one uniform and more constrained and the other close to critical state. A direct comparison between the shape and kinematic databases shows to what degree particle shape descriptors are related to observed kinematics. It appears that true sphericity is a good predictor of upper bound rotational restraint., The work here described has been supported by the Spanish Ministry of Economy through Grants BIA2014-59467-R and BIA2017-84752-R. Laboratoire 3SR is part of the LabEx Tec21 (Investissements d’Avenir - Grant Agreement nANR-11-LABX-0030)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

G-PFEM: an open access numerical tool for the simulation of spudcan penetration in clays, G-PFEM: un outil numérique en libre accès pour la simulation de la pénétration de spudcan dans les argiles

  • Ciantia, Matteo Oryem
  • Dilberoglu, Emre
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Carbonell Puigbó, Josep Maria
Penetration depth of Spudcan foundations for offshore mobile Jack-up rigs is typically predicted by considering a wished-in-place foundation at different depths and following traditional bearing capacity approaches. However, the large penetration depths involved, stress redistributions and the flow of the material around the spudcan are some example of features which make the wished-in-place assumption quite unrealistic. This paper presents an open access application package developed to simulate and hence predict load penetration curves of spudcan installation in multi-layered clay profiles. The numerical tool adopts the recently developed particle finite element method for geotechnical applications (G-PFEM). The potential of this large strain particle finite element application is demonstrated by simulating field data from the literature. The results show that load-penetration curves obtained using G-PFEM capture more efficiently the field results with respect to other numerical and analytical methods. It is also shown how the G-PFEM automatically captures cavity infill. In the paper the computational cost for the simulation of penetration up to 40m on a standard desktop are shown to be low compared to other commercial software., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydraulic conductivity from piezocone on-the-fly: a numerical evaluation

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Carbonell Puigbó, Josep Maria
Permeability is important in many geotechnical applications. The current CPTu practice to obtain permeability values relies on dissipation tests, which are frequently slow and only linked to permeability through compressibility measures. On-the-fly methods offer an alternative approach in which permeability is directly linked to CPTu penetration measurements. Several on-the-fly methods have been proposed and their applicability and relative advantages are not fully clear. Numerical effective stress simulation of CPTu testing is used here to explore in a simplified but realistic setting the relative merits of different on-the-fly methods. It is found that for partly drained materials the original simpler relation between cone metrics and normalized permeability works reasonably well. A continuous generalization of Elsworth and Lee method to the full permeability range is proposed, noting the connection to the backbone normalized pore pressure curve that describes the partly drained transition of cone penetration. The importance of an undrained limit beyond which the method produces large errors is stressed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A contact model for rough crushable sand

  • Zhang, Ningning
  • Ciantia, Matteo Oryem
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
Sand roughness is now accessible to measurement. Incorporating this parameter into sand models using the discrete element method (DEM) is known to improve bulk small strain response. In this work we explore the effect on problems where particle crushing takes place. A well-established DEM particle crushing model and a rough Hertzian contact model are here combined to incorporate both effects in a single contact model. Including contact roughness results in stronger particles whilst all other material parameters being equal. The model is then used to simulate high pressure oedometric compression tests on a strong silica sand. It is shown that including realistic values of surface roughness enables to correctly capture both load-unload behaviour and particle size distribution evolution while using realistic values of elastic bulk properties for the sand grains. Roughness is then a model refinement that may result in simpler, more objective DEM calibrations., This work was partly supported by the Ministry of Science and Innovation of Spain through the research grant BIA2017-84752-R and by the EPCC-CIRRUS Scottish Academic Access sc019-EPCC-CIRRUS project., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Static & dynamic probing of rough breakable sands, Sondage statique et dynamique des sables cassants rugueux

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Ciantia, Matteo Oryem
Both static and dynamic penetration tests are widely used to conduct soil investigation practice. Particle crushability has been known to greatly affect the responses of penetration tests. On the other hand, the physical property of granular materials – surface roughness – exhibits considerable influence on crushability. The virtual calibration chamber (VCC) technique, based on the Discrete Element Method (DEM), is used to investigate the effect of particle crushability and roughness on both static and dynamic penetration test responses. In static tests particle crushing reduces tip resistance, and roughness enhances this effect as rough particles crush more than smooth ones. The main effects of roughness and crushability on dynamic responses lie in the track of dynamic penetrograms. The analysis confirms a good correlation between an equivalent dynamic resistance and the static tip resistance., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Measuring traffic lane-changing by converting video into space–time still images

  • Sala Sanmartí, Marcel
  • Soriguera Martí, Francesc
  • Huillca, Kevin
  • Vilaplana Besler, Verónica
Empirical data is needed in order to extend our knowledge of traffic behavior. Video recordings are used to enrich typical data from loop detectors. In this context, data extraction from videos becomes a challenging task. Setting automatic video processing systems is costly, complex, and the accuracy achieved is usually not enough to improve traffic flow models. In contrast “visual” data extraction by watching the recordings requires extensive human intervention. A semiautomatic video processing methodology to count lane-changing in freeways is proposed. The method allows counting lane changes faster than with the visual procedure without falling into the complexities and errors of full automation. The method is based on converting the video into a set of space–time still images, from where to visually count. This methodology has been tested at several freeway locations near Barcelona (Spain) with good results. A user-friendly implementation of the method is available on http://bit.ly/2yUi08M., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large-strain analysis of undrained smooth tube sampling

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Carbonell Puigbó, Josep Maria
  • Gens Solé, Antonio
Borehole tube sampling is a key process of geotechnical engineering. The paper presents numerical analyses of smooth tube sampling in clay using the Particle Finite Element Method (PFEM). The soil is described by a conventional elasto-plastic constitutive model (Tresca plasticity and a quasi-incompressible elastic law). The sampler is advanced by several diameters into the soil until a steady state is observed. The elasto-plastic numerical solution for a round-tipped sampler clearly identifies a localized shear failure mechanism at the entrance of the tube. Relevant Strain Path Method (SPM) solutions are numerically evaluated to facilitate full field comparison. For a given thickness ratio elasto-plastic simulation predicts far less compression but much larger extensions at the centerline than SPM. The results also show how including a beveled sampler tip or a stationary piston changes the failure mechanism and significantly reduces induced peak extension strains. The results agree with available experimental data and well-established empirical observations. The methodology presented may open the way to a soil mechanics based rational approach to soil sampling simulation., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The third author acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the "Severo Ochoa Programme for Centres of Excellence in R&D" (CEX2018-000797-S), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Application of a bonded critical state model to design tunnel support for rockmass bulking

  • Ciantia, Matteo Oryem
  • Arroyo Álvarez de Toledo, Marcos
  • Kaiser, P. K.
Gabion-type support is a favoured option to restrain bulking in pillar walls of mine footprint tunnels. It uses closely spaced short reinforcements in tunnel walls (typically fully grouted rebar) in combination with surface support (rock fragment retention systems such as shotcrete, weld wire mesh, straps, etc.). The system is installed while the rock is still mostly intact and is conceived to maintain support capacity even when, the rock attains a fully fragmented state, acting then like a gabion or earth-reinforced type retaining wall. In this paper the interaction between the support system and the highly stressed pillar walls is investigated numerically by means of finite element analyses within the framework of displacement-based design. Because the material response should capture the passage from intact rock to fully fragmented state, an advanced elasto-plastic bonded constitutive model was adopted as a simulation framework. The model is calibrated to replicate the mechanical behaviour of Bursnip Sandstone and Amarelo Pais Granite. These two rocks were selected because of high quality triaxial tests results from the literature. After showing the good performance of the model to reproduce both low and high pressure triaxial compression behaviour an extensive parametric study investigating the effects of bolt types on gabion response is presented., This work was partly supported by the Ministry of Science and Innovation of Spain through the research grant BIA2017-84752-R, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy balance analyses during Standard Penetration Tests in a virtual calibration chamber

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Gens Solé, Antonio
The Standard Penetration Test (SPT) is the most popular example of dynamic probing, a large category of soil testing techniques. Understanding and interpretation of these tests is hampered by the difficulties of reproducing them under controlled laboratory conditions. The virtual calibration chamber technique, based on the Discrete Element Method (DEM), may supplement or substitute this complex experimentation. In this paper SPT in sand are analyzed considering the energy transfer involved. Energy balances are written for the penetrating rod and for the material in the chamber. All the terms are computed for a number of cases in which the main variables controlling test response in the field -initial density and stress level- are systematically varied. The analysis confirms previous field observations indicating that, when an energy-based interpretation is used, SPT provides a value of equivalent penetration resistance that is the same that would be obtained with a static cone penetration test. The analyses also provide an unequivocal explanation for this observation: although the impacting rod shows complicated dynamics the response of the sand is quasi-static., The first author was supported by a CSC grant. This work was partly supported by the Ministry of 486 Science and Innovation of Spain through the research grant BIA2017-84752-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A stable mesh-independent approach for numerical modelling of structured soils at large strains

  • Monforte Vila, Lluís
  • Ciantia, Matteo Oryem
  • Carbonell Puigbó, Josep Maria
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
We describe the large strain implementation of an elasto-plastic model for structured soils into G-PFEM, a code developed for geotechnical simulations using the Particle Finite Element Method. The constitutive model is appropriate for naturally structured clays, cement-improved soils and soft rocks. Structure may result in brittle behavior even in contractive paths; as a result, localized failure modes are expected in most applications. To avoid the pathological mesh-dependence that may accompany strain localization, a nonlocal reformulation of the model is employed. The resulting constitutive model is incorporated into a numerical code by means of a local explicit stress integration technique. To ensure computability this is hosted within a more general Implicit-Explicit integration scheme (IMPLEX). The good performance of these techniques is illustrated by means of element tests and boundary value problems., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sphericity measures of sand grains

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos
  • Andò, Edward
  • Gens Solé, Antonio
The sphericity of a grain should measure the similitude of its shape with that of a sphere. Sphericity is a shape descriptor of long-standing interest for sedimentology. Now it has gained also interest to facilitate discrete element modelling of granular materials. True sphericity was initially defined by a surface ratio that requires three-dimensional (3D) grain surface measurement. That kind of measurement has been practically impossible until recently and, as a consequence, a number of alternative 3D measures and 2D proxies were proposed. In this work we present results from a study of grain shape based on x-ray tomography of two different sand specimens, containing more than 110.000 particles altogether. Sphericity measures were systematically obtained for all grains. 2D proxy measures were also obtained in samples of oriented and not-oriented grains. It is shown that the 2D proxy best correlated with true sphericity is perimeter sphericity, whereas the traditional Krumbein-Sloss chart proxy is poorly correlated. 2D measures acquired through minor axis projection are more closely related to 3D measures than those acquired using random projections., Peer Reviewed, Postprint (author's final draft)