Pasar al contenido principal

TECNOLOGIAS PARA LA INTEGRACION EN LA RED DE ENERGIAS RENOVABLES: ELECTRONICA DE POTENCIA, ALMACENAMIENTO, GESTION ENERGETICA E INTERACCION CON LA RED

DPI2013-42853-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A tool for the performance evaluation and failure detection of Amareleja PV plant (Acciona) from SCADA

  • Muñoz Escribano, Mikel
  • Parra Laita, Íñigo de la
  • García Solano, Miguel
  • Marcos Álvarez, Javier
  • Pérez, Miguel
Póster presentado a la 17th European Conference on Power Electronics and Applications, EPE-ECCE Europe. Ginebra (Suiza), 2015., This paper describes a tool developed for the performance evaluation and failure detection in a 45.6 MWp PV plant installed by the company Acciona in Amareleja (Portugal). The paper describes the PV plant configuration and its SCADA (Supervisory Control And Data Acquisition), the measured variables and the main functionalities of the software. Some of these functionalities are the automatic and accurate PSTC (Power under standard test conditions1) calculation for each generator and for the whole PV Plant, the reference production that would be delivered by the PV plant assuming a 100% availability, the hierarchy of SCADA alarms, the detection of long-term trends and degradation in PV generators, possible hidden problems in the different equipment and systems composing the PV plant, etc. This tool entered into operation in 2011 and is working properly since then., This work has been partially financed by the Seventh Framework Programme of the European Commission with the project PVCROPS (Photovoltaic Cost Reduction, Reliability, Operational Performance, Prediction and Simulation – Grant Agreement no: 308468) and by the Spanish Ministry of Economy and Competitiveness under Grant DPI2013-42853-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Control strategy for an integrated photovoltaic-battery system

  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
In photovoltaic-battery systems, more attention is usually paid to the MPPT control while the battery management is put aside. This paper proposes two control strategies for an integrated PV-battery system, both of them making it possible to perform MPPT or regulate the battery voltage to its maximum value in order to prevent it from overcharging. Simulation results prove the feasibility of both controls., This work was supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R and DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Multisampled-capacitor-voltage active damping for parallel interleaved grid connected voltage source converters with LCL filter

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
Parallel interleaved converters for high power renewable energy systems present stability issues at the LCL resonance frequency. A multisampled measurement and filtering strategy is proposed to stabilize the system based on the capacitor voltage derivative active damping, overcoming its limitations for low switching power converters. The effects of the delays on the stability of the active damping strategy would be analysed. The solution developed is robust against grid inductance variations, ensuring the fulfilment of the stringent harmonic grid codes., The authors gratefully acknowledge Ingeteam Power Technology and the Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R and DPI2016-80641-R for its financial and ongoing support. This work was partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen-based energy storage for a distributed generation system

  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
Incluye póster., One of the most typical distributed generation systems are electrical microgrid, which consist on small electrical grids, generally connected to the main grid, with a decentralized management structure. Electrical microgrids allow higher renewable energy integration in the grid, achieving a cost decrease and improving the grid quality [1]. These mi- crogrids incorporate renewable generation systems and energy consumers. Moreover, they have storage systems to balance generation and consumption as well as the exchanged power with the main grid. Traditionally, lead-acid batter- ies have been used in microgrids. However, these batteries have some drawbacks, being the most important its poor performance in partial state of charge, which is critical for a microgrid. A suitable option for the storage system is hy- drogen technology. These systems have high energy density, which makes the storage system able to assume seasonal variability of renewable resources. This paper proposes a sizing methodology for storage systems based on hydrogen for grid-tied electrical microgrids. This methodology optimizes the relationship between the storage system size and the consumption of grid power., Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R; 2015 Annual Grants for Research and Development of Fundación Bancaria Caja Navarra (supporting project 70276); FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the stability criteria for inverter current control loops with LCL output filters and varying grid impedance

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
The use of LC and LCL filters and grid impedance variations are creating new challenges on the controller design for current control loops of photovoltaic and wind turbine inverters. In the design process, stability criteria such as Bode and revised Bode are commonly used. This paper analyses the limitations of Bode and revised Bode criteria to reliably determine stability and proposes a sufficient and necessary stability criterion, based on the Nyquist criterion, but that makes use of the Bode diagram. The proposed criterion, named generalized Bode criterion, is always reliable and helps the controller design. Relative stability in complex control loops is also studied and a relative stability analysis is proposed. Finally, the generalized Bode criterion and the proposed relative stability analysis are illustrated with a practical example in which a PI is designed in order to guarantee stability and achieve relative stability., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R, DPI2016-80641-R and by the company Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Influence of the aging model of lithium-ion batteries on the management of PV self-consumption systems

  • Berrueta Irigoyen, Alberto
  • Pascual Miqueleiz, Julio María
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their improving characteristics and decreasing price. An accurate knowledge of their aging is required for a successful use of these ESSs. The vast number of models that has been proposed to predict these phenomena raise doubts about the suitability of a model for a particular battery application. The performance of three models published for a Sanyo 18650 cylindrical cell in a self-consumption system are compared in this work. Measured photovoltaic production and home consumption with a sampling frequency of 15 minutes are used for this comparison. The different aging predictions calculated by these three models are analyzed, compared and discussed. These comparison is particularized for two management strategies. The first of them maximizes the self-consumption PV energy, while the second reduces the maximum power peak demanded from the grid., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R, DPI2016-80641-R and DPI2016-80642-R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Comparison of State-of-Charge estimation methods for stationary Lithium-ion batteries

  • Berrueta Irigoyen, Alberto
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
An accurate monitoring of the State of Charge (SoC) is mandatory for an efficient management of a Lithium-ion battery. Batteries of stationary systems barely have long resting periods when the cumulative errors can be reset. These special requirements make a robust and accurate SoC estimation algorithm necessary. A real stationary system including an experimental microgrid with renewable energy generation, home consumption and a 5.3 kWh Li-ion storage system is analyzed in this paper. Three representative SoC monitoring algorithms are applied and compared in terms of accuracy and robustness to battery aging and current measurement offset. A closed-loop method consisting of an adaptive filter and a state observer achieves best results while having a reasonable computational complexity., Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R, FPU Program of the Spanish Ministry of Education, Culture and Sport (FPUI3/00542) and 2015 Annual Grants for Research and Development of Fundación Bancaria Caja Navarra (supporting project 70276).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analytical winding loss calculation for high-frequency low-permeability inductors

  • Barrios Rípodas, Ernesto
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
Traditional winding loss estimation models lead to unacceptable estimation errors when applied to low-permeability inductors. This is due to the highly two-dimensional character of the magnetic field in these inductor windings. In this paper, a new analytical model is proposed which makes it possible to carry out a straightforward and accurate calculation of the winding loss in high-frequency low-permeability inductors., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R and DPI2016-80641-R, and by the Public University of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen educational activities developed by APERNA: a renewable-energy student association

  • Berrueta Irigoyen, Alberto
  • San Martín Biurrun, Idoia
  • Samanes Pascual, Javier
  • Pascual Miqueleiz, Julio María
  • Barrios Rípodas, Ernesto
  • Parra Laita, Íñigo de la
  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Incluye póster, In this paper, we present APERNA, a recently-created student association at Public University of Navarre (UPNA) with the aim of promotion of renewable energies., The authors would like to acknowledge the support of the Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R, the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542) and the 2015 Annual Grants for Research and Development of Fundación Bancaria Caja Navarra (supporting project 70276).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the calculation of the STC power of PV generators by using typical monitoring system data

  • Muñoz Escribano, Mikel
  • Parra Laita, Íñigo de la
  • García Solano, Miguel
  • Marcos Álvarez, Javier
  • Marroyo Palomo, Luis
Póster presentado a la 33rd European Photovoltaic Solar Energy Conference and Exhibition. Amsterdam (Países Bajos), 2017., The properly in-field characterization of the power at Standard Test Conditions, PSTC, of PV generators is becoming increasingly important in order to evaluate their performance and its evolution in time. Within the state of art, the PSTC characterization procedures of PV arrays are mainly based on I-V curve measurements or PDC measurements performed by precision wattmeters. Those characterizations are usually carried out during discrete measurement campaigns, which does not allow a continuous tracking of the PSTC evolution. In this paper a new PSTC characterization procedure is proposed which is based on the DC power measurements performed by the own PV inverters connected to the PV arrays. This procedure enables an automatic and continuous calculation of the PSTC, which allows to observe its evolution and to detect possible anomalous trends, premature degradations, etc. The procedure has been validated in several PV generators of the large-scale Amareleja PV Plant (45.6 MWp). As showed in this paper, by using several day data and applying the adequate filters, a high accuracy in the PSTC calculation can be achieved, a similar accuracy to that obtained by using precision wattmeter measurements., This work has been partially financed by the Seventh Framework Programme of the European Commission with the project PVCROPS (Photovoltaic Cost Reduction, Reliability, Operational Performance, Prediction and Simulation – Grant Agreement no: 308468) and by the Spanish Ministry of Economy and Competitiveness under Grant DPI2013-42853-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

PV power forecasting using a parametric model

  • Muñoz Escribano, Mikel
  • Parra Laita, Íñigo de la
  • García Solano, Miguel
  • Marcos Álvarez, Javier
Póster presentado a la 31st European Photovoltaic Solar Energy Conference and Exhibition. Hamburgo (Alemania), 2015., Nowadays, accurate AC power output forecast of PV plants can play a significant role for both the system operators and PV plant owners. The first group has to program the dispatch of the electric system and the second one needs to plan their energy commercialization schedule up front. Therefore, after analyzing the existing commercial services of PV production forecast, it has been identified the potential to improve the models used to calculate the AC power output from irradiance and ambient temperature forecasts. Then, in this paper, a parametric model is proposed in order to improve the forecast performance. This model provides the AC power at the output of the PV plan using as input variables predicted ambient temperature and predicted global horizontal irradiance, both obtained from open sources. It has been evaluated and validated using historical production data of a fixed generator (2,24kWp) and a large PV power plant (45MWp) and historical forecast data from the open source Meteogalicia In addition, a toolbox to implement this parametric methodology has been built upon the Matlab environment. The toolbox has been developed to provide the PV plant production one day in advance., This work has been partially financed by the Seventh Framework Programme of the European Commission with the project PVCROPS (Photovoltaic Cost Reduction, Reliability, Operational Performance, Prediction and Simulation – Grant Agreement no: 308468) and by the Spanish Ministry of Economy and Competitiveness under Grant DPI2013-42853-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Sensorless active damping strategy for parallel interleaved voltage source power converters with LCL filter

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
Grid-connected pulse-width modulation converters with LCL filters are widely extended as an interface for renewable energy generating systems. Those filters arise stability issues due to the filter resonance, which, must be damped, preferably by active damping methods, to avoid additional power losses. In some applications, such as offshore wind energy conversion systems, where high power converters are connected to low voltage networks, the commutation frequency is limited to low values to reduce the power losses and the resulting filter components are bulky. For this reason, in addition to its higher current handling capabilities, the use of power converters in parallel with the application of advanced modulation strategies, such as interleaving, is gaining importance. In this structure the filter components can be reduced, setting the filter resonance frequency at a higher value. As a consequence, the filter resonance frequency is close to the Nyquist frequency, complicating the implementation of some of the existing active damping solutions. In this work, an active damping approach based on a third order digital filter is proposed to stabilize the system. The robustness of the solution is investigated against grid inductance variations and the grid current harmonic content will be tested to comply with the most demanding grid codes. The proposed active damping strategy does not require extra sensors and can be easily designed by examining the open loop Bode plots. It is suitable to stabilize the LCL filter with a resonance frequency close to the Nyquist frequency, where some of the existing active damping approaches are unable to damp the system. The proposed method can be also an appropriate solution for existing grid connected power converters with stability issues due to changes in the effective grid impedance at which they are connected., The authors gratefully acknowledge Ingeteam Power Technology and the Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R for its financial and ongoing support. This work was partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simple and robust PLL algorithm for accurate phase tracking under grid disturbances

  • Arricibita de Andrés, David
  • Marroyo Palomo, Luis
  • Barrios Rípodas, Ernesto
Phase-locked loops (PLLs) are commonly used for the synchronization of grid connected power converters. However, the standard PLL structures are not able to reject grid disturbances such as voltage harmonics, unbalances or DC components in the measured voltage. Since the response of the power converters depends on the grid phase tracking, it is necessary to ensure an accurate synchronization even under distorted conditions. This paper proposes an enhanced PLL structure, which is able to perform fast synchronization even under weak grid conditions and frequency variations. Due to its low computational burden, the proposed PLL allows its implementation on low cost microprocessors., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R and DPI2016-80641-R, and by the Public University of Navarre through a doctoral scholarship. The authors would like to thank INGETEAM POWER TECHNOLOGY for its financial and permanent support.