Pasar al contenido principal

CONVERTIDORES ELECTRONICOS AVANZADOS PARA INTEGRACION EN RED DE SISTEMAS FOTOVOLTAICOS Y EOLICOS

DPI2016-80641-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Identification of critical parameters for the design of energy management algorithms for Li-ion batteries operating in PV power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. For a proper use of such storage systems, an energy management algorithm (EMA) is required. A number of EMAs, with various characteristics, have been published recently, given the diverse nature of battery problems. The EMA of deterministic battery problems is usually based on an optimization algorithm. The selection of such an algorithm depends on a few problem characteristics, which need to be identified and closely analyzed. The aim of this article is to identify the critical optimization problem parameters that determine the most suitable EMA for a Li-ion battery. With this purpose, the starting point is a detailed model of a Li-ion battery. Three EMAs based on the algorithms used to face deterministic problems, namely dynamic, linear, and quadratic programming, are designed to optimize the energy dispatch of such a battery. Using real irradiation and power price data, the results of these EMAs are compared for various case studies. Given that none of the EMAs achieves the best results for all analyzed cases, the problem parameters that determine the most suitable algorithm are identified to be four, i.e., desired computation intensity, characteristics of the battery aging model, battery energy and power capabilities, and the number of optimization variables, which are determined by the number of energy storage systems, the length of the optimization problem, and the desired time step., This work was supported in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Spanish State Research Agency and FEDER-UE under Grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00, and PID2019-110956RB-I00, in part by the Government of Navarra through Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Fuzzy-based energy management of a residential electro-thermal microgrid based on power forecasting

  • Arcos Avilés, Diego
  • Gordillo, Rodolfo
  • Guinjoan Gispert, Francesc
  • Sanchis Gúrpide, Pablo
  • Pascual Miqueleiz, Julio María
  • Marietta, Martin P.
  • Marroyo Palomo, Luis
  • Ibarra, Alexander
In this paper, an energy management strategy based on microgrid power forecasting is applied to a residential grid-connected electro-thermal microgrid with the aim of smoothing the power profile exchanged with the grid. The microgrid architecture under study considers electrical and thermal renewable generation, energy storage system (ESS), and loads. The proposed strategy manages the energy stored in the ESS to cover part of the energy required by the thermal generation system for supplying domestic hot water to the residence. The simulation results using real data and the comparison with previous strategy have demonstrated the effectiveness of the proposed strategy., This work is part of the project 2016-PIC-044 and 2018-REV-003 from the Research Group of Propagation, Electronic Control, and Networking (PROCONET) of Universidad de las Fuerzas Armadas ESPE. This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities: grants DPI2013-41224-P, DPI2015-67292, DPI2016-80641-R, and DPI2017-85404-P.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the limits of the capacitor-voltage active damping for grid-connected power converters with LCL filter

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
Active damping strategies are widely extended to avoid stability issues at the LCL filter resonant poles in grid-connected voltage source converters. The capacitor voltage derivative active damping effectively damps the filter resonant poles without additional sensors, but it loses its effectiveness as the resonance frequency approaches the converter control Nyquist frequency, influenced by the existing delays in the control loop. To reduce this limitation, the delays can be reduced by performing a multisampled derivative, however, even though the stability limits might be extended, the oversampled approach might increase noise amplification problems. An appropriate filtering solution is required in the feedback path in order to reduce noise amplification and eliminate aliasing problems, without compromising the stability, as a result of a modification in the active damping feedback path. This work examines the limits of applicability of the capacitor voltage derivative strategy taking into account the filters used in the AD path, providing experimental results to validate the presented approach., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R, and partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Active damping based on the capacitor voltage positive-feedback for grid-connected power converters with LCL filter

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
The capacitor voltage positive-feedback is a widely extended active damping strategy. It can effectively damp the LCL output filter resonant poles for low ratios of resonance to sampling frequencies. However, the existing delays in the control loop limit the applicability of the capacitor-voltage positive-feedback. For high ratios of resonance to sampling frequencies, it becomes ineffective and can even destabilize the system. This limitation is overcome in this paper by adjusting the delay in the feedback path. With the delay adjustment, a robust damping can be achieved if the delays are properly considered, including the filters, and the grid impedance variations are taken into account. Simulation results validate the proposed active damping strategy., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Energy storage systems based on lithium-ion batteries and supercapacitors: characterization, modelling and integration with renewable energies

  • Berrueta Irigoyen, Alberto
Los inconvenientes medioambientales, sociales y económicos que presentan los combustibles fósiles y nucleares están propiciando un uso cada vez mayor de fuentes de energía renovables. El fuerte desarrollo tecnológico de los sistemas de generación basados en estas fuentes de energía, especialmente de los sistemas eólicos y fotovoltaicos, ha abaratado enormemente sus costes de producción, resultando ya tecnologías competitivas en relación con las plantas convencionales. Actualmente, el principal obstáculo que limita su integración masiva en la red eléctrica es su gestionabilidad, dada la naturaleza intermitente del recurso renovable. Los sistemas de almacenamiento energético distribuidos, y en particular las baterías de litio y los supercondensadores, surgen como una de las mejores alternativas para mejorar la gestión de esta energía y facilitar la operación de una red el ectrica cada vez más basada en sistemas renovables. Esta tesis analiza en profundidad ambas tecnologías de almacenamiento, especialmente cuando funcionan en entornos de generación renovable. Las principales líneas de trabajo de la tesis son: Análisis del estado actual de las tecnologías; Estudio de la influencia de los fenómenos termodinámicos, electroquímicos y térmicos en el funcionamiento de estos sistemas de almacenamiento; Modelado electroquímico y térmico de ambas tecnologías de almacenamiento; Estimación del estado de carga y del envejecimiento en baterías de litio; Validación experimental de los modelos propuestos ante diferentes condiciones de funcionamiento; Desarrollo de metodologías para el diseño y funcionamiento óptimo de sistemas de almacenamiento basados en baterías de litio en entornos renovables y particularización para centrales fotovoltaicas., Environmental, social and economic drawbacks of fossil and nuclear fuels are leading to an increased use of renewable energy sources. The strong technological development of renewable-based generation systems during the last years, especially in the case of wind and photovoltaic systems, has led to an impressive reduction of production costs and made these technologies competitive with conventional power plants. At present, the main barrier that limits their massive integration into the electrical grid is their reduced manageability due to the intermittent nature of renewable resources. Distributed energy storage systems, particularly lithium-ion batteries and supercapacitors, arise as one of the best options to provide manageability to these systems and help operate an electrical grid increasingly based and dependent on renewable power plants. This thesis analyses in depth both energy storage technologies, in particular when they operate in renewable generation systems. The main research lines of the thesis are: Analysis of the state of the art of lithium-ion battery and supercapacitor technologies; Study of the infuence of thermodynamic, electrochemical and thermal phenomena on the operation of these storage technologies; Electrochemical and thermal modelling of both technologies; Estimation of the state of charge and ageing of lithium-ion batteries; Experimental validation of the proposed models under different operating conditions; Development of methodologies for the optimal design and operation of storage systems based on lithium-ion batteries in renewable environments, and implementation in photovoltaic power plants., This thesis has been subsidised by the FPU Program of the Spanish Ministry of Education, Culture and Sport with the scholarship FPU 13/00542. Moreover, funding from the Spanish Ministry of Economy, Industry and Competitiveness has been used under the research and development projects DPI2016-80641-R, DPI2016-80642-R and DPI2013-42853-R and from the Government of Navarre under the research and development project "Integration of renewable energy in the electricity grid by means of advance energy storage systems"., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Modelización de parques eólicos conectados a redes débiles, Modeling of wind farms connected to weak grids

  • Velasco Vitrián, David
El aumento de penetración eólica producido a escala mundial está propiciando la conexión de una gran cantidad de parques eólicos a redes débiles. Esto supone un reto para los operadores de la red y de los propios parques eólicos, al surgir problemas de estabilidad que anteriormente no existían. A la hora de afrontar los problemas derivados de la integración en red de estos parques, resulta de gran importancia disponer de modelos precisos de la realidad. Existen en la literatura modelos completos de parques y turbinas eólicas que permiten detectar estos problemas con precisión razonable. Estos modelos, sin embargo, suelen ser complejos y computacionalmente muy costosos, por lo que se utilizan más como un instrumento de validación que de diseño. En la fase de diseño suelen emplearse modelos lineales muy sencillos que permiten simular el sistema rápidamente y, por ende, realizar grandes series de simulaciones para, por ejemplo, analizar un amplio rango de escenarios o para optimizar los parámetros de control. Estos modelos, sin embargo, suelen adolecer de una excesiva simplificación que provocan que, en muchas ocasiones, no reproduzcan con suficiente precisión la dinámica o, lo que es peor, no permitan detectar casos de inestabilidad. En este contexto, el objetivo de la tesis realizada es la obtención de modelos lineales precisos de parques eólicos y, en particular, de lazos de control de corriente. Para ello, se han abordado las siguientes líneas de trabajo: Recopilación de las principales opciones de modelización lineal de aerogeneradores y redes eléctricas; Desarrollo de una metodología de modelización lineal que sea aplicable a una gran variedad de sistemas de generación renovable; Obtención de un modelo lineal que recoja de manera precisa el comportamiento y las dinámicas más importantes de un convertidor conectado a una red débil; Modelización de parques eólicos de turbinas Full‐Converter (FC) y Doblemente Alimentadas (DFIG) conectados a una red débil., Esta tesis ha recibido financiación de la Agencia Española de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER-UE) a través de los proyectos de investigación y desarrollo DPI2013-42853-R y DPI2016-80641-R., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

DC capacitance reduction in three-phase photovoltaic inverters by using virtual impedance emulation

  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
DC voltage regulation in grid-connected three-phase PV inverters is a fundamental requirement. In order to reduce the influence of the PV non-linear behavior and ensure stability in the whole operating range, the input capacitance in high-power inverters is currently oversized, thus increasing the converter cost. This paper proposes a control method which emulates a virtual impedance in parallel with the PV generator, making it possible to reduce the capacitance by a factor of 5. Simulation results confirm that the proposed control is stable and fast enough in the whole operating range with such a small capacitor., This work was supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R. The authors gratefully acknowledge the financial and ongoing support of Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Characterization and capacity dispersion of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Nowadays, electric vehicle batteries reutilization is considered such as a feasible alternative to recycling, as it allows to benefit from their remaining energy and to enlarge their lifetime. Stationary applications as self-consumption or isolated systems support are examples of possible second life uses for these batteries. However, the modules that compose these batteries have very heterogeneous properties, and therefore condition their performance. This paper aims to characterize and analyze the existing capacity dispersion of Nissan Leaf modules that have reached the end of their lifetime on their original application and of new modules of this Electric Vehicle, in order to establish a comparison between them., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Strategies for improving the efficiency and grid-connection stability of power converters for wind energy systems

  • Samanes Pascual, Javier
La energía eólica es una de las principales fuentes de generación renovable, una tecnología que continúa expandiéndose gracias a la reducción de costes y a la mayor concienciación ambiental de la sociedad. Esta expansión a nivel mundial está provocando que las turbinas eólicas se conecten a redes débiles, que plantean nuevos problemas de estabilidad. Asimismo, para continuar avanzando en la reducción del coste de la energía generada, la eficiencia de los sistemas de generación eólica, y consecuentemente del convertidor de potencia, se convierte en un aspecto clave. Por ultimo, existe una tendencia entre los principales fabricantes de aerogeneradores a incrementar el tamaño de las turbinas, aprovechando las economías de escala existentes. Esta tendencia está forzando a buscar nuevas estructuras de conversión para estas turbinas que alcanzan hoy en día los 9 MW. Dentro de este contexto general, en esta tesis se abordan las siguientes líneas de investigación: - Modelo detallado de los lazos de control de un convertidor de conexión a red. - Mejora de la respuesta din amica del convertidor. - Mejora de la estabilidad y de la eficiencia de convertidores de conexión a red al amortiguar el filtro de salida mediante el control. - Incremento de la eficiencia gracias a la utilización de modulaciones específicas para convertidores eólicos. - Análisis de las estructuras de conversión para turbinas eólicas de gran potencia y extensión a estos sistemas de las técnicas anteriores., Wind power is one of the most extensive renewable energies, which continues to grow, powered by the cost reduction of the technology and a greater societal environmental awareness. This worldwide expansion brings new challenges, such as the connection of wind turbines to weak grids, raising new stability issues. In addition, the e ciency of wind energy conversion systems, and consequently, of the power converter, becomes a key aspect to keep reducing the cost of energy. The last challenge to be highlighted is the increase of the rated power of the agship wind turbines among the main manufacturers. This tendency is behind the interest of developing new conversion structures for modern wind turbines, which already reach 9 MW. In this general context, the general research lines are: - Detailed modeling of the control loops of a grid connected power converter. - Improvement of the converter's dynamic response. - Enhancement of the stability and e ciency of grid-connected power converters by damping the output lter through control techniques. - Increasing the system e ciency by using speci c modulations for power converters used in wind energy conversion systems. - Analysis of the conversion structures for high power wind turbines and extension of the previous techniques to these systems., This thesis has been funded by the Public University of Navarre through a doctoral scholarship. The company Ingeteam Power Technology has supported this investigation under contracts OTRI 2016 024 004 and OTRI 2014 024 084. Moreover, the Spanish State Research Agency (AEI) and FEDER-UE have supported the investigation under grants DPI2013-42853-R and DPI2016-80641-R., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Effect of the inner current loop on the voltage regulation for three-phase photovoltaic inverters

  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
In three-phase grid-connected PV inverters, regulating the input voltage is a fundamental requirement. In order to reduce the influence of the PV non-linear behavior and ensure stability in the whole operating range, the input capacitance is currently oversized. This paper reveals the important effect of the inner current loop in the voltage stability and proposes to use a Proportional (P) controller instead of a PI controller. If tuned following the guidelines provided in this paper, the P controller makes it possible to design a stable voltage loop without increasing the input capacitance, thus reducing the converter cost., This work was supported by the Spanish State Research Agency (AEI) under grant PID2019-110956RB-I00/AEI/10.13039 and grant DPI-201680641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Influence of renewable power fluctuations on the lifetime prediction of lithium-ion batteries in a microgrid environment

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This contribution analyses lifetime estimation errors due to the effect of power fluctuations in lithium-ion batteries connected to microgrids when different time steps are used for the calculations. Usually, not every second data are available or the computational cost is excessively high. Those facts result in the use of larger time steps. However, the increase of the time steps may turn out in too optimistic predictions. Data from a real microgrid make it possible to optimize calculation times while keeping low errors. The results show that when 1 minute time step is set, the computation time is reduced by 14.4 times while the lifetime overstatement is only 3.5-5.2% higher, depending on the aging model., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER--UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Maximum expected ramp rates using cloud speed sensor measurements

  • Wang, Guang Chao
  • Kurtz, Ben
  • Bosch, Juan Luis
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Large ramps and ramp rates in photovoltaic (PV) power output are of concern and sometimes even explicitly restricted by grid operators. Battery energy storage systems can smooth the power output and maintain ramp rates within permissible limits. To enable PV plant and energy storage system design and planning, a method to estimate the largest expected ramps for a given location is proposed. Because clouds are the dominant source of PV power output variability, an analytical relationship between the worst expected ramp rate, cloud motion vector, and the geometrical layout of the PV plant is developed. The ability of the proposed method to bracket actual ramp rates is assessed over 10 months under different meteorological conditions, demonstrating an average compliance rate of 98.9% for a 2 min evaluation time window. The largest observed ramp of 29.7% s(-1)is contained with the worst case estimate of 34.3% s(-1). This method provides a convenient yet economical approach to worst-case PV ramp rate modeling and is compatible with solar irradiance measured at coarse temporal resolution., Juan Bosch was financed in part by Project No. PID2019-108953RB-C21, funded by the Ministerio de Ciencia e Innovación and co-financed by the European Regional Development Fund. In addition, Iñigo de la Parra was partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under Grant Nos. DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Worst expected ramp rates from cloud speed measurements

  • Wang, Guang Chao
  • Bosch, Juan Luis
  • Kurtz, Ben
  • Parra Laita, Íñigo de la
  • Wu, Elynn
Large PV power ramp rates are of concern and sometimes even explicitly restricted by grid operators. Battery energy storage systems can smooth the power output and maintain ramp rates within permissible limits. To enable PV plant and energy storage systems design and planning, a method to estimate the largest expected ramps for a given location is proposed. Because clouds are the dominant source of PV power output variability, an analytical relationship between the worst expected ramp rates, cloud motion vectors, and the geometrical layout of the PV plant is developed. The ability of the proposed method to bracket actual ramp rates is assessed over 8 months under different meteorological conditions, demonstrating an average compliance rate of 96.9% for a 2 min evaluation time window., Juan Luis Bosch has been financed in part by Projects ENE2017-83790-C3-3-R and ENE2014-59454-C3-2-R which were funded by the Ministerio de Ciencia, Innovación y Universidades and Ministerio de Economía y Competitividad, respectively, and co-financed by the European Regional Development Fund. In addition, Iñigo de la Parra has been partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Multisampled-capacitor-voltage active damping for parallel interleaved grid connected voltage source converters with LCL filter

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
Parallel interleaved converters for high power renewable energy systems present stability issues at the LCL resonance frequency. A multisampled measurement and filtering strategy is proposed to stabilize the system based on the capacitor voltage derivative active damping, overcoming its limitations for low switching power converters. The effects of the delays on the stability of the active damping strategy would be analysed. The solution developed is robust against grid inductance variations, ensuring the fulfilment of the stringent harmonic grid codes., The authors gratefully acknowledge Ingeteam Power Technology and the Spanish Ministry of Economy and Competitiveness under grant DPI2013-42853-R and DPI2016-80641-R for its financial and ongoing support. This work was partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

MIMO based decoupling strategy for grid connected power converters controlled in the synchronous reference frame

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
  • López Taberna, Jesús
Power converters are frequently connected to the grid through a LCL filter, controlling its power transfer through a current control loop in the synchronous reference frame. In this reference frame, cross coupling terms appear between the current and voltages of the passive components, which, without a proper decoupling strategy, penalize the converter transient response and the current control adjustment. In this work, an intuitive decoupling strategy is presented to improve the dynamic behavior, based on Multiple-Input-Multiple-Output systems theory. The approach developed is particularly interesting in extremely weak grids, allowing an easier adjustment of the main controller., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R, and partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Estrategias de control para inversores fotovoltaicos de gran potencia en redes muy débiles

  • Arricibita de Andrés, David
La energía fotovoltaica ha experimentado un gran crecimiento en el mundo en los ultimos años, motivado principalmente por el descenso de su precio durante la ultima década. Esta reducción de costes ha hecho que se convierta en una tecnología de generación eléctrica muy atractiva en países en desarrollo, donde la demanda eléctrica es cada vez mayor, y en sistemas insulares, en los que permite mejorar la independencia energética de los mismos. El sistema eléctrico de potencia en esos lugares está muy poco mallado en comparación con los lugares en los que habitualmente se situaban las plantas fotovoltaicas, por lo que presentan una impedancia de red mucho mayor que lo habitual. Esto, unido al tamaño cada vez mayor de las plantas instaladas, hace que el ratio de la potencia de cortocircuito (SCR) disminuya hasta valores cercanos a la unidad. En este nuevo escenario, la integración de inversores fotovoltaicos plantea nuevos problemas relacionados con la estabilidad de los lazos de control. Dentro de este contexto, en esta tesis se abordan las siguientes líneas de investigación: Modelo el lazo de control de corriente, incluyendo la PLL utilizada para sincronizarse con la red; Estudio del efecto de la impedancia de red en la estabilidad del lazo de control; Mejora de la estabilidad del lazo de control de corriente en redes débiles; Mejora de la estabilidad de la PLL en redes débiles; Análisis de las técnicas de control basadas en la emulación del generador síncrono y aplicación al caso de redes débiles., Esta tesis ha sido subvencionada por el programa de Formación de Personal Investigador (FPI) de la Universidad Pública de Navarra, a través de una beca predoctoral. Además, se ha recibido financiación de la Agencia Española de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER-UE) a través de los proyectos de investigación y desarrollo DPI2013-42853-R y DPI2016-80641-R., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the requirements of the power converter for second-life lithium-ion batteries

  • Berrueta Irigoyen, Alberto
  • San Martín Biurrun, Idoia
  • Pascual Miqueleiz, Julio María
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The use of lithium-ion batteries is increasing year after year, especially in the automotive sector. Given the high requirements of electric vehicles, their energy storage systems are discarded when they still have around 70% of its initial capacity. These discarded batteries are being studied as a low-price option for stationary systems, mostly related to renewable energy generation, with lower battery requirements. However, the increasing dispersion of cell capacity detailed in this contribution limits the use of second-life cells if regular battery management systems and power converters. We present in this contribution an experimental comparison of the capacity dispersion between fresh and second-life cells, and detail the relationship between the capacity dispersion and the required BMS functionality. Furthermore, we include the ageing phenomena in the analysis by means of experimental ageing results, given that the capacity dispersion is enlarged as the battery ages. After this, we use this data to quantify advantages and disadvantages of a combined BMS and power converter, based on a multilevel topology, compared to a conventional BMS. The most relevant result, when a 55-cell battery is analysed, is a 65% increase in capacity during its whole second life if the BMS and power converter are combined by means of a multilevel topology. The increased level of complexity required by the combined BMS-power converter architecture is analysed in this contribution, providing a convenient tool for the selection of the most suitable option for each application., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Combined dynamic programming and region-elimination technique algorithm for optimal sizing and management of lithium-ion batteries for photovoltaic plants

  • Berrueta Irigoyen, Alberto
  • Heck, Michael
  • Jantsch, Martin
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The unpredictable nature of renewable energies is drawing attention to lithium-ion batteries. In order to make full utilization of these batteries, some research works are focused on the management of existing systems, while others propose sizing techniques based on business models. However, in order to optimise the global system, a comprehensive methodology that considers both battery sizing and management at the same time is needed. This paper proposes a new optimisation algorithm based on a combination of dynamic programming and a region elimination technique that makes it possible to address both problems at the same time. This is of great interest, since the optimal size of the storage system depends on the management strategy and, in turn, the design of this strategy needs to take account of the battery size. The method is applied to a real installation consisting of a 100 kWp rooftop photovoltaic plant and a Li-ion battery system connected to a grid with variable electricity price. Results show that, unlike conventional optimisation methods, the proposed algorithm reaches an optimised energy dispatch plan that leads to a higher net present value. Finally, the tool is used to provide a sensitivity analysis that identifies key informative variables for decision makers, The authors would like to acknowledge the support of the Spanish State Research Agency and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Common-mode and phase-to-ground voltage reduction in back-to-back power converters with discontinuous PWM

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
  • Juankorena Saldias, Xabier
  • Gironés Remírez, Carlos
Discontinuous space vector pulsewidth modulation (DSVPWM) techniques are an interesting option for three-phase, two-level power converters when efficiency is a key factor. Such is the case of back-to-back (B2B) power converters used mainly in wind energy conversion systems and electrical drives. The application of DSVPWMs to B2B converters increases the common-mode (CM) and phase-to-ground (PG) voltages by 50%, compared to conventional space vector pulsewidth modulation (SVPWM7). Higher CM and PG voltages cause bearing currents and insulation stress, which reduce system reliability. In this article, this problem is addressed and two DSVPWM strategies are presented to reduce the CM and PG voltages in B2B power converters. In the first proposal, the CM and PG are both limited to the same values as the conventional SVPWM7 without introducing additional commutations. In the second proposal, a further modification is added to reduce the CM by 50%, compared to the SVPWM7, although this modulation strategy eventually requires two additional commutations in certain periods. Experimental and simulation results validate the performance of the proposed strategies., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust multisampled capacitor voltage active damping for grid-connected power converters

  • Samanes Pascual, Javier
  • Urtasun Erburu, Andoni
  • Gubía Villabona, Eugenio
  • Petri, Alberto
The derivative feedback of the capacitor voltage is one of the most extended active damping strategies, used to eliminate stability problems in grid-connected power converters with an LCL filter. This strategy is equivalent to the implementation of a virtual impedance in parallel with the filter capacitor. This virtual impedance is strongly affected by the control loop delays and frequency, creating changes in the sign of the emulated virtual resistor, and raising instability regions where the active damping is ineffective. As a consequence, the LCL resonance frequency is restricted to vary, as the effective grid inductance changes, within the active damping stability region. This is an additional restriction imposed on the LCL filter design that can compromise the achievement of an optimised design. For this reason, in this work, a different strategy is presented; by adjusting the delay in the active damping feedback path, it becomes stable within the range where the LCL resonance frequency can be located for a given filter design, achieving a robust damping. Analytical expressions are provided to adjust this delay. To widen the stability region of the capacitor voltage derivative active damping, a multisampled derivative is implemented, overcoming its limitations close to the control Nyquist frequency. Experimental and simulation results validate the active damping strategy presented., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R. This work was partially funded by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comprehensive model for lithium-ion batteries: from the physical principles to an electrical model

  • Berrueta Irigoyen, Alberto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The growing interest in e-mobility and the increasing installation of renewable energy-based systems are leading to rapid improvements in lithium-ion batteries. In this context, battery manufacturers and engineers require advanced models in order to study battery performance accurately. A number of Li-ion battery models are based on the representation of physical phenomena by electrochemical equations. Although providing detailed physics-based information, these models cannot take into account all the phenomena for a whole battery, given the high complexity of the equations. Other models are based on equivalent circuits and are easier to design and use. However, they fail to relate these circuit parameters to physical properties. In order to take the best of both modeling techniques, we propose an equivalent circuit model which keeps a straight correlation between its parameters and the battery electrochemical principles. Consequently, this model has the required simplicity to be used in the simulation of a whole battery, while providing the depth of detail needed to identify physical phenomena. Moreover, due to its high accuracy, it can be used in a wide range of environments, as shown in the experimental validations carried out in the final section of this paper., The authors acknowledge the support of the Spanish State Research Agency (AEI) and FEDER UE under grants DPI2013 42853 R, DPI2016 80641 R and DPI2016 80642 R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Critical comparison of energy management algorithms for lithium-ion batteries in renewable power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • García Solano, Miguel
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. A good energy management strategy is required in order to increase the profitability of an energy system using a Li-ion battery for storage. The vast number of management algorithms that has been proposed to optimize the achieved profit, with diverse computational power requirements and using models with different complexity, raise doubts about the suitability of an algorithm and the required computation power for a particular application. The performance of three energy management algorithms based on linear, quadratic, and dynamic programming are compared in this work. A realistic scenario of a medium-sized PV plant with a constraint of peak shaving is used for this comparison. The results achieved by the three algorithms are compared and the grounds of the differences are analyzed. Among the three compared algorithms, the quadratic one seems to be the most suitable for renewableenergy applications, given the undue simplification of the battery aging required by the linear algorithm and the discretization and computational power required by a dynamic algorithm., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Control of a photovoltaic array interfacing current-mode-controlled boost converter based on virtual impedance emulation

  • Urtasun Erburu, Andoni
  • Samanes Pascual, Javier
  • Barrios Rípodas, Ernesto
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
Due to the nonlinear characteristics of a photovoltaic (PV) array, its regulation is highly dependent on the operating point. Focusing on a dc-dc boost converter, this paper first shows how the PV voltage and inductor current controls are affected by the PV array. It then proposes to emulate an impedance virtually connected to the PV array, making it possible to greatly improve the control robustness. Thanks to the proposed strategy, the crossover frequency variation for the whole operating range is reduced from 42 times for the traditional control to 3.5 times when emulating parallel resistance or to 1.4 times when emulating series and parallel resistances, all with simple implementation. Experimental results with a commercial PV inverter and a 4-kWp PV array validate the theoretical analysis and demonstrate the superior performance of the proposed control., This work was supported in part by Ingeteam Power Technology and in part by Spanish State Research Agency (AEI) FEDER-UE under Grant DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

The potential of forecasting in reducing the LCOE in PV plants under ramp-rate restrictions

  • Cirés Buey, Eulalia
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • García Solano, Miguel
  • Marroyo Palomo, Luis
An increasing number of grid codes are requiring the limitation of the PV output power fluctuation over a given time scale. Batteries represent the most obvious solution to smooth power fluctuations, with the corresponding negative impact on the PV energy cost. However, short-term forecasting is currently being proposed as a tool to reduce battery capacity requirements or even completely remove it. Although these solutions decrease or avoid the battery cost, it also entails some energy curtailment losses which obviously raise the final cost of PV energy. This energy losses, currently unknown, are independent of the forecasting accuracy and represent the minimal additional cost in the hypothetical case of a perfect prediction. Thus, this paper compares Levelized Cost of Energy (LCOE) of three ramp-rate control strategies in order to determine which would give the lowest cost: battery-based, ideal short-term forecasting, or a combination of both. Results show that curtailment losses would be small enough to make battery-less strategy an appropriate choice, so it is worthwhile improving short-term forecasting in view of the potential LCOE savings. Database is taken from high resolution measurements recorded for over a year at 8 PV plants ranging from 1 to 46 MWp., The authors would like to thank ACCIONA for authorizing measurements at its PV plants and for the helpful collaboration of its staff. This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE (ERDF-EU) under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Experimental assessment of first- and second-life electric vehicle batteries: performance, capacity dispersion, and aging

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Nowadays, the reuse of electric vehicle batteries is considered to be a feasible alternative to recycling, as it allows them to benefit from their remaining energy capacity and to enlarge their lifetime. Stationary applications, such as self-consumption or off-grid systems support, are examples of second-life (SL) uses for retired batteries. However, reused modules that compose these batteries have heterogeneous properties, which limit their performance. This article aims to assess the influence of degradation in modules from electric vehicles, covering three main aspects: performance, capacity dispersion, and extended SL behavior. First, a complete characterization of new and reused modules is carried out, considering three temperatures and three discharge rates. In the second stage, intra- and intermodule capacity dispersions are evaluated with new and reused samples. Finally, the behavior during SL is also analyzed, through an accelerated cycling test so that the evolution of capacity and dispersion are assessed. Experimental results show that the performance of reused modules is especially undermined at low temperatures and high current rates, as well as in advanced stages of aging. The intramodule dispersion is found to be similar in reused and new samples, while the intermodule differences are nearly four times greater in SL., This work was supported in part by the Spanish State Research Agency (AEI) under Grant PID2019-111262RB-I00/AEI/10.13039/501100011033 and Grant DPI2016-80641-R, in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Government of Navarra under Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Ramp-rate control in large PV plants: battery vs. short-term forecast

  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Cirés Buey, Eulalia
  • Wang, Guang Chao
  • García Solano, Miguel
  • Marroyo Palomo, Luis
Incluye póster, The changeability in the power produced by utility-scale PV plants caused by shadows due to passing clouds can compromise grid stability. Traditionally, some kind of energy storage systems (ESS) is proposed as the solution to reduce power variations below the limits imposed by new grid codes regulations. However, recent short-term forecast sources open the door to control the variability without batteries, using only inverter limitation. This option entails some energy curtailment losses that has not been yet addressed. This paper quantifies these losses for the first time using a meaningful database of 5 s one year data for a 38.5 MW PV plant in a perfect forecast scenery. Finally, we compare the economic cost of installing a lithium-ion battery vs. the inverter limitation solution. The results obtained indicate that battery-less strategies must not be neglected for ramp-rate control, since they can be more cost-effective using perfect forecast for any ramp value., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Dual-mode soft-transition control for single-phase grid-connected photovoltaic inverters

  • Elizondo Martínez, David
  • Urtasun Erburu, Andoni
Incluye póster, Single-phase grid-connected inverters for photovoltaic power generation have been strongly analysed for improvement. Dual-mode control for two-stage inverters makes it possible to improve the efficiency by alternating between switching the dc/dc boost and the dc/ac buck stages, depending on the grid voltage value. However, according to the literature, the transition from one mode to the other is abrupt, which harms the grid current quality. This paper proposes a dual-mode control method which achieves high efficiency and a soft-transition in the grid current. Applying suitable feed-forward compensations, this control method improves the grid current quality, as demonstrated by the presented simulation results., This work was supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Analysis and characterisation of lithium-ion batteries for the integration of renewable energies: modelling, energy management and applications

  • Soto Cabria, Adrián
La necesidad de un cambio en el modelo energético actual hacia un futuro en el que se abogue por la sostenibilidad como pilar indispensable del progreso ha suscitado un cambio en el paradigma energético. Las fuentes de generación basadas en la nociva quema de combustibles fósiles han de ser erradicadas con la mayor celeridad posible. Es en este contexto, en el que las baterías de iones de litio emergen como una solución viable y amigable con el medio ambiente. Las baterías de iones de litio, dada su alta densidad energética, pueden ser empleadas en el sector del transporte como sustitutas a los combustibles fósiles. No obstante, la electricación del sistema automovilístico no conlleva asociada una mejora sustancial si la generación eléctrica sigue proviniendo de sistemas basados en la quema de combustibles fósiles o de la energía nuclear. La principal alternativa estriba en remplazar estas fuentes convencionales por fuentes de origen renovables. No obstante, un sistema basado únicamente en los incontrolables recursos renovables no sería más que una utopía sin un sistema de almacenamiento que los acompañe, como son las baterías de iones de litio. Esta tesis analiza en detalle esta tecnología, y en especial, su aplicación en entornos de generación renovables. Las principales líneas de trabajo son: Análisis del estado actual de la tecnología de baterías de iones de litio; Estudio de las principales técnicas de caracterización no invasivas como herramienta para cuantificar e identificar los mecanismos de degradación en baterías de iones de litio; Modelizado eléctrico de baterías de iones de litio y validación en sistemas reales; Estudio e identificación de aspectos clave en baterías de iones de litio para la integración de energías renovables en la red eléctrica., Gaur egungo energia-eredua aldatzeko beharra dago, jasangarritasuna oinarria izan behar du, horrek energia-paradigma aldatzea ekarri du. Erregai fosilen erreketa kaltegarrian oinarritutako sorkuntza-iturriak ahalik eta azkarren murriztu behar dira. Testuinguru honetan, litiozko ioien bateriak ingurumenarekiko irtenbide bideragarri eta lagunkoi gisa azaleratzen dira. Litioiozko bateriak, energia-dentsitate handia dutenez, garraio-sektorean erabil daitezke erregai fosilen ordez. Hala ere, automobil-sistemaren elektrifikazioak ez dakar berekin funtsezko hobekuntzarik, baldin eta elektrizitatea erregai fosilen erretzean edo energia nuklearrean oinarritutako ohiko sistemetatik badator. Aukera nagusia iturri horiek energia berriztagarriekin ordezkatzea da. Hala eta guztiz ere, iturri berriztagarriak kontrolagaitzak direnez, sistema energetikoa energia berrizagarrietan bakarrik oinarritutakoa utopia bat baino ez litzateke, haiekin batera doan biltegiratze-sistemarik gabe, litio-ioizko bateriekin, adibidez. Tesi honek zehazkiro aztertzen du teknologia hori, eta bereziki, sorkuntza berriztagarriko inguruneetan duen aplikazioa. Hauek dira ikerketa-lerro nagusiak: Litio-ioizko baterien teknologiaren egoeraren azterketa; Karakterizazio ez-inbaditzaileko teknika nagusiak aztertzea, litio-ioizko baterien degradazio-mekanismoak kuantikatzeko eta identikatzeko tresnagisa; Litio-ioizko baterien modelatze elektrikoa eta balidazioa sistema errealetan; Litio-ioizko baterien funtsezko alderdiak aztertu eta identi katzea, energia berriztagarriak sare elektrikoan integratzeko., The need for a change in the current energy model towards a future in which sustainability is advocated as an indispensable pillar of progress has led to a change in the energy paradigm. The hitherto used power sources based on the harmful burning of fossil fuels must be eradicated as quickly as possible. In this context, lithium-ion batteries emerge as a viable and environmentally friendly solution. Lithium-ion batteries, given their high energy density, can be used in the transport sector as substitutes for fossil fuels. However, the electrication of the automotive system does not entail a substantial improvement if the power generation continues to come from conventional systems based on the burning of fossil fuels or nuclear energy. The main alternative is to replace these sources with renewable sources. However, a system based solely on uncontrollable renewable resources would be nothing more than a utopia without a storage system to accompany them, such as lithium-ion batteries. This thesis analyses in detail this technology, and in particular, its application in renewable generation environments. The main lines of work are: Analysis of the current state of lithium-ion battery technology; Study of the main non-invasive characterisation techniques as a tool to quantify and identify the degradation mechanisms on lithium-ion batteries; Electrical modelling of lithium-ion batteries and validation in real systems; Study and identication of key aspects of lithium-ion batteries for the integration of renewable energies into the power grid., This thesis has been subsidised by a Ph.D. Scholarship from the Public University of Navarre. Moreover, it has been partly supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants PID2019-111262RB-I00/AEI/10.13039/501100011033, DPI2016-80641-R and DPI2016-80642-R, by the European Union under the H2020 Project STARDUST under Grant 774094, by the Government of Navarre under the research and development projects PI020 RENEWABLE-STORAGE and 'Integration of renewable energy in the electricity grid by means of advanced energy storage systems','GERA' and by the Public University of Navarre through the research project ReBMS PJUPNA1904., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the stability criteria for inverter current control loops with LCL output filters and varying grid impedance

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
The use of LC and LCL filters and grid impedance variations are creating new challenges on the controller design for current control loops of photovoltaic and wind turbine inverters. In the design process, stability criteria such as Bode and revised Bode are commonly used. This paper analyses the limitations of Bode and revised Bode criteria to reliably determine stability and proposes a sufficient and necessary stability criterion, based on the Nyquist criterion, but that makes use of the Bode diagram. The proposed criterion, named generalized Bode criterion, is always reliable and helps the controller design. Relative stability in complex control loops is also studied and a relative stability analysis is proposed. Finally, the generalized Bode criterion and the proposed relative stability analysis are illustrated with a practical example in which a PI is designed in order to guarantee stability and achieve relative stability., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R, DPI2016-80641-R and by the company Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Cloud tomography applied to sky images: a virtual testbed

  • Mejía, Felipe A.
  • Kurtz, Ben
  • Levis, Aviad
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Two tomographic techniques are applied to two simulated sets of sky images with different cloud fraction. The Algebraic Reconstruction Technique (ART) is applied to optical depth maps from sky images to reconstruct 3-D cloud extinction coefficients without considering multiple scattering effects. Reconstruction accuracy is explored for different products, including surface irradiance and extinction coefficients, and as a function of the number of available sky imagers and setup distance. Increasing the number of imagers improves the accuracy of the 3-D reconstruction: for surface irradiance, the error decreases significantly up to four imagers at which point the improvements become marginal. But using nine imagers gives more robust results in practical situations in which the circumsolar region of images has to be excluded due to poor cloud detection. The ideal distance between imagers was also explored: for a cloud height of 1 km, increasing distance up to 3 km (the domain length) improved the 3-D reconstruction. An iterative reconstruction technique that iteratively updated the source function improved the results of the ART by minimizing the error between input red radiance images and reconstructed red radiance simulations. For the best case of a nine-imager deployment, the ART and iterative method resulted in 53.4% and 33.6% relative mean absolute error for the extinction coefficients, respectively., The authors acknowledge funding from the California Energy Commission EPIC program. Felipe Mejia was supported by the National Science Foundation Graduate Research Fellowship under Grant No. (DGE-1144086). In addition, Íñigo de la Parra has been partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Supercapacitors: electrical characteristics, modelling, applications and future trends

  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • San Martín Biurrun, Idoia
  • Eftekhari, Ali
  • Sanchis Gúrpide, Pablo
Energy storage systems are playing an increasingly important role in a variety of applications, such as electric vehicles or grid-connected systems. In this context, supercapacitors (SCs) are gaining ground due to their high power density, good performance and long maintenance-free lifetime. For this reason, SCs are a hot research topic, and several papers are being published on material engineering, performance characterization, modelling and post-mortem analysis. A compilation of the most important millstones on this topic is essential to keep researchers on related fields updated about new potentials of this technology. This review paper covers recent research aspects and applications of SCs, highlighting the relationship between material properties and electrical characteristics. It begins with an explanation of the energy storage mechanisms and materials used by SCs. Based on these materials, the SCs are classified, their key features are summarised, and their electrochemical characteristics are related to electrical performance. Given the high interest in system modelling and the large number of papers published on this topic, modelling techniques are classified, explained and compared, addressing their strengths and weaknesses, and the experimental techniques used to measure the modelled properties are described. Finally, the market sectors in which SCs are successfully used, as well as their growth expectations are analysed. The analysis presented herein gives account of the expansion that SC market is currently undergoing and identifies the most promising research trends on this field., This work was supported in part by the Spanish State Research Agency (AEI) and FEDER UE under Grant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Government of Navarre through the Research Project PI020 RENEWABLE-STORAGE, and in part by the FPU Program of the Spanish Ministry of Education, Culture and Sport under Grant FPU13 /00542.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the on-site measurement of the degradation rate of crystalline silicon PV modules at plant level

  • Pascual Miqueleiz, Julio María
  • Berrueta Irigoyen, Alberto
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
This paper proposes a method for measuring the degradation rate of crystalline silicon PV modules at plant level in two different ways as a form of verification. As actual levels of degradation rate have been observed to be as low as 0.2%/a, the uncertainties make it difficult to measure this value accurately at plant level. However, despite the low value, it is still important to know the actual degradation rate due to its impact on energy yield. In this paper, two ways of measuring the degradation rate at plant level are proposed. These two methods, with different uncertainty sources, are proposed to be used jointly in order to have a better approach to the real value. Finally, an example of measurement in a 1.78 MW PV plant is presented., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Modeling the inherent damping of high-power inverters

  • Erdocia Zabala, Ioseba
  • Urtasun Erburu, Andoni
  • Marroyo Palomo, Luis
In order to decide whether passive or active damping is required in a three-phase inverter, a previous step is to assess the intrinsic damping of the system. However, few works focus on modeling this damping for DC/AC operation. This paper proposes two models to reproduce the damping sources: the simulation model, used to validate the system in large-signal, and the small-signal model, which can be employed for the controller design. Both models have been validated by means of experimental results for a 1.64 MVA inverter., This work was supported by the Spanish State Research Agency (AEI) under grants PID2019-110956RB-I00/AEI/10.13039 and DPI-2016-80641-R, and by the Public University of Navarre through a doctoral scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Active control for medium-frequency transformers flux-balancing in a novel three-phase topology for cascaded conversion structures

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Navarrete, Manuel
  • Balda Belzunegui, Julián
  • González Senosiain, Roberto
  • Sanchis Gúrpide, Pablo
Efficiency and power density are important parameters in the design of power electronics converters. In many applications, low-frequency transformers are being substituted for medium-frequency and high-frequency transformers in order to reduce the volume and therefore the cost of the transformer. However, preventing their saturation is a complex task. This paper studies the medium-frequency transformers' flux balancing in a novel three-phase topology for cascaded conversion structures.Based on the modulation technique of the converter, a method to directly measure the magnetizing current of the medium-frequency transformers is proposed in this paper. A control loop to regulate the dc value of the magnetizing current is also designed and developed. Simulation results validate the correct operation of the control loop, which prevents the transformer saturation., This work was supported by the Spanish State Research Agency (AEI) under grants PID2019-110956RB-I00 /AEI/ 10.13039/501100011033 and DPI-2016-80641-R, and by the Public University of Navarre through a doctoral scolarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analytical winding loss calculation for high-frequency low-permeability inductors

  • Barrios Rípodas, Ernesto
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
Traditional winding loss estimation models lead to unacceptable estimation errors when applied to low-permeability inductors. This is due to the highly two-dimensional character of the magnetic field in these inductor windings. In this paper, a new analytical model is proposed which makes it possible to carry out a straightforward and accurate calculation of the winding loss in high-frequency low-permeability inductors., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R and DPI2016-80641-R, and by the Public University of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Nueva topología de inversor de media tensión con conexión en cascada y funcionamiento secuencial para grandes plantas fotovoltaicas: operación, control, dimensionado óptimo y validación experimental

  • Lumbreras Magallón, David
El contexto energético actual se caracteriza por un fuerte crecimiento de las energías renovables, motivado por el notable descenso de coste que han experimentado en los últimos años, especialmente en el caso de la energía solar fotovoltaica. Las plantas fotovoltaicas de gran tamaño son las que presentan un menor coste, utilizándose tradicionalmente en ellas la configuración de inversor central. Sin embargo, esta configuración, por sus propias características, tiene un potencial limitado en cuanto a futuras reducciones de costes. En esta tesis, se propone una nueva topología de conversión con la configuración de inversor en cascada que, entre otras ventajas, permite la reducción del cableado de la planta fotovoltaica. Además, gracias a su funcionamiento secuencial, reduce el número de etapas de conversión en comparación con las soluciones investigadas hasta la fecha. Asimismo, su modulación hace que se realicen conmutaciones sin pérdidas en todas sus etapas de conversión. Las principales líneas de investigación que se abordan en esta tesis son: - Análisis de la configuración de inversor central en una gran planta fotovoltaica; - Estudio de las ventajas de la configuración de inversor en cascada y realización de un estado del arte de esta configuración; - Propuesta de la nueva topología de conversión; - Análisis del funcionamiento y desarrollo del control de la topología propuesta; - Validación experimental de la topología propuesta; - Estudio de la estabilidad de un sistema de control: formulación de un nuevo criterio de estabilidad y aplicación al diseño de los lazos de control de la topología propuesta; - Dimensionado óptimo de un sistema fotovoltaico con la topología propuesta y evaluación de su competitividad., Esta tesis ha sido subvencionada por el programa de Formación de Personal Investigador (FPI) de la Universidad Pública de Navarra, a través de una beca predoctoral. Además, se ha recibido financiación de la Agencia Española de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER-UE) a través de los proyectos de investigación y desarrollo DPI2016-80641-R y PID2019-110956RB-I00., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

On the stability of advanced power electronic converters: the Generalized Bode Criterion

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
A key factor in the design of power electronic converters is the development of control systems and, in particular, the determination of their stability. Due to ease of application, the Bode criteria are currently the most commonly used stability criteria, both with regard to its classic version and to the subsequent revisions proposed in the literature. However, as these criteria have a limited range of applicability, on occasions it is necessary to resort to other universally applicable criteria such as the Nyquist criterion. Unlike Bode, the Nyquist criterion can always be applied, although its use considerably complicates the tuning of the controller. This paper proposes a new stability criterion, called Generalized Bode Criterion, which is based on the Nyquist criterion and, therefore, always applicable, but calculated from both the Bode diagram and the 0 Hz phase of the open-loop transfer function, thus making the criterion easy to be applied. This way, the proposed criterion combines the advantages of Nyquist and Bode criteria and provides an interesting and useful tool to help in the controller design process. The validation of the criterion is made on a voltage control loop for a stand-alone PV system through simulation and experimental tests made on a voltage control loop for a stand-alone PV system including a battery, a boost converter, an inverter and an ac load. The tests are also used to show the limitations of the classic Bode criterion and its revisions to correctly determine the stability of complex systems. IEEE, This work was supported in part by the Spanish State Research Agency (AEI) and FEDER-UE underGrant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Public University of Navarre through a doctoral scholarship, and in part by the Ingeteam Power Technology
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Parameter-independent battery control based on series and parallel impedance emulation

  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Guinjoan Gispert, Francesc
  • Marroyo Palomo, Luis
Appropriate voltage control is essential in order to extend the useful life of a battery. However, when universal chargers are used, the design of this control becomes more complicated, given the fact that the battery impedance value may vary considerably, depending not only on the operating point but also on the type, size, and aging level of the battery. This paper first shows how the voltage regulation can become extremely variable or even unstable when the controller is designed according to the proposals in the literature. We then go on to propose the emulation of a series and parallel impedance with the battery, which is easy to implement and achieves a control that is completely independent of the battery connected. The simulation results obtained for batteries with resistances ranging from 10 mΩ to 1Ω, show the problems with existing controls and confirm that the proposed control response is similar for all the possible range of battery resistance., This work was supported in part by the Spanish State Research Agency (AEI) and ERDF-UE under Grant DPI2016-80641-R, and in part by Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Experimental assessment of cycling ageing of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The reutilization of batteries from electric vehicles allows to benefit from their remaining energy capacity and to increase their lifespan. The applications considered for the second life of these batteries are less demanding than electric vehicles regarding power and energy density. However, there is still some uncertainty regarding the technical and economic viability of these systems. In this context, the study of the ageing and lifetime of reused batteries is key to contribute to their development. This paper assesses the experimental cycle ageing of lithium-ion modules from different Nissan Leaf through accelerated cycling tests on their second life. The evolution of the internal parameters during ageing and the correlation between them are shown, including the analysis of best fitting curves. In addition, a second-life end-of-life criterion is proposed, based on capacity and internal resistance measurements during cells ageing, which can be applied to real application in order to prevent safety issues. By estimating future values from degradation trends and checking latter measurements, the ageing knee is identified. Results show that the modules operate for at least 2033 equivalent full cycles before reaching their ageing knee. This would mean more than 5 years of operation in a real second-life application, such as a photovoltaic self-consumption installation with daily cycling. Moreover, it is shown that a traditional cell characterisation based on capacity and internal resistance measurements is not enough to predict the durability of a cell during its second life., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016–80641-R, DPI2016–80642-R, PID2019–111262RB-I00 and PID2019–110956RB-I00, of Government of Navarra through research project 0011–1411–2018–000029 GERA and of Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analysis of the main battery characterization techniques and experimental comparison of commercial 18650 Li-ion cells

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Over the coming years, major growth in the use of Li-ion batteries is expected, both in electric mobility as well as in stationary applications, be it in self-consumption systems and micro grids or in large renewable power generation plants. The proper characterization of lithium-ion cells is of vital importance for the development of precise models that permit the simulation and prediction of their behavior, so as to suitably configure cell groupings for the resulting battery packs, and to properly select the most suitable cells from the extensive manufacturer offer. In this work, an analysis is conducted of the main techniques used in the literature to characterize batteries. Also, an experimental comparative is carried out on 18650 Liion cells from three large global manufacturers, focusing on the primary methodologies used to characterize capacity, internal resistance and open circuit voltage. Finally, the advantages and disadvantages are presented for the methodologies used, based on the experimental results obtained., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Low complexity energy management strategy for grid profile smoothing of a residential grid-connected microgrid using generation and demand forecasting

  • Arcos Avilés, Diego
  • Pascual Miqueleiz, Julio María
  • Guinjoan Gispert, Francesc
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
This paper presents the design of an energy management strategy based on a low complexity Fuzzy Logic Control (FLC) for grid power profile smoothing of a residential grid-connected microgrid including Renewable Energy Sources (RES) and battery Energy Storage System (ESS). The proposed energy management strategy uses generation and demand forecasting to anticipate the future behavior of the microgrid. Accordingly to the microgrid power forecast error and the Battery State-of-Charge (SOC) the proposed strategy performs the suitable control of the grid power. A simulation comparison with previous energy management strategies highlights the advantages of the proposed work minimizing fluctuations and power peaks in the power profile exchanged with the grid while keeping the energy stored in the battery between secure limits. Finally, the experimental validation in a real residential microgrid implemented at Public University of Navarre (UPNA, Spain) demonstrates the proper operation of the proposed strategy achieving a smooth grid power profile and a battery SOC center close to the 75% of the rated battery capacity., This work is part of the project 2016-PIC-044 from the Universidad de las Fuerzas Armadas ESPE. This work was partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants: DPI2015-67292, DPI2013-41224-P, DPI2013-42853-R and DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Capacitor current feedback active damping with lagged compensator for DFIG wind turbines with LCL filter

  • Rosado Galparsoro, Leyre
  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
  • López Taberna, Jesús
Several active damping strategies have been proposed in the literature for grid-connected converters with LCL filter but there are not specific strategies for DFIG wind turbines. In this system, there is an interaction between the two converters of the back-to-back conversion structure, which must be properly modeled in order to design effective damping strategies for the LCL filter resonant poles. This paper proposes a robust active damping strategy for DFIG wind turbines with LCL filter that considers the special features of this system. In this technique the filter capacitor current is fed back through a lag compensator that adjusts the delay of the feedback loop to emulate a virtual impedance that has dominant resistive behavior in the range of possible resonance frequencies. It is shown that a similar damping of the LCL filter resonance is achieved when the strategy isimplemented in either of the two converters., This work was supported by the Spanish State Research Agency (AEI) under grants PID2019-110956RB-I00 /AEI/10.13039 and DPI-2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Integration of second-life battery packs for self-consumption applications: analysis of a real experience

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Zorrilla, Pablo
  • Iribarren Zabalegui, Álvaro
  • Castillo, Diego H.
  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Rodríguez, Adolfo J.
  • Vargas Requena, David Tomás
  • Matías Maestro, Ignacio
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This contribution presents a methodology for the integration of Li-ion batteries discarded from electric vehicle into a collective self-consumption installation, showing the technical feasibility of such battery second use. In this regard, the state of charge (SOC) estimation is a relevant issue for the energy management of the second-life battery. Therefore, a SOC estimator is proposed in this contribution and tested in field. Moreover, the revealed costs analysis allows an economic comparison between the integration of a discarded battery pack in a second-life application or a remanufacture of these packs, thereby selecting the most suitable cells to build second-life batteries. This is a crucial issue for companies focused on the development of second-life batteries. The results obtained after testing the second-life battery pack in a real installation make it possible to extol the benefits of including this type of batteries in a self-consumption system, reaching a self-consumption ratio of 69 % and reducing by 36 % the maximum power peak demanded from the grid., This work has been supported by the Spanish State Research Agency (AEI) under grants PID2019-111262RB-I00 /AEI/ 10.13039/501100011033 and DPI2016–80641-R, the European Union under the H2020 project STARDUST (774094), the Government of Navarra through research project 0011–1411–2018–000029 GERA and the Public University of Navarra under project ReBMS PJUPNA1904. Also noteworthy is the support received from the Mexican Program for Strengthening Educational Quality (PFCE) (2017-2021) for the Postgraduate Program Master of Science and -UAT.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Methodology for sizing stand-alone hybrid systems: a case study of a traffic control system

  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This paper proposes a methodology for sizing stand-alone hybrid photovoltaic-wind power generation systems. This methodology makes it possible to optimise the overall performance of the stand-alone system components, based on the premise of guaranteeing the power supply throughout the useful life of the installation at a minimum cost. The sizing is performed in two stages. Firstly, the components of the wind and photovoltaic power generation subsystem are obtained and, secondly, the size of the storage subsystem is determined. For the storage subsystem sizing, account is taken of the variation in efficiency according to the operating point and also the deterioration of the subsystem due to aging and, therefore, the loss of available energy during the useful life of the installation. This methodology is applied to a stand-alone traffic control system located on a secondary road in the Autonomous Community of Valencia (Spain). This system comprises wind and photovoltaic power generation components, a lithium battery bank and various traffic management components. Finally, an analysis of the proposed sizing is made. Satisfactory results are obtained, showing how the proposed methodology makes it possible to optimise the sizing of stand-alone systems with regard to the size of its components, cost and operation., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R, DPI2016-80642-R and DPI2016-80641-R; and by the Government of Navarre under project PIO38 INTEGRA-RENOVABLES.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analytical modeling of high-frequency winding loss in round-wire toroidal inductors

  • Elizondo Martínez, David
  • Barrios Rípodas, Ernesto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Toroidal inductors are present in many different industrial applications, thus, still receive researchers' attention. AC winding loss in these inductors have become a major issue in the design process, since switching frequency is being continuously increased in power electronic converters. Finite element analysis software or analytical models such as Dowell's are the main existing alternatives for their calculation. However, the first one employs too much time if different designs are to be evaluated and the second one lacks accuracy when applied to toroidal inductor windings. Looking for an alternative that overcomes these drawbacks, this paper proposes an accurate, easy-to-use analytical model, specifically formulated for calculating high-frequency winding loss in round-wire toroidal inductors., This work was supported by the Spanish State Research Agency (AEI) under grants PID2019-110956RB-I00/AEI/10.13039 and DPI-2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Development of energy management strategies for the sizing of a fast charging station for electric buses

  • Ojer Palacios, Iñaki
  • Berrueta Irigoyen, Alberto
  • Pascual Miqueleiz, Julio María
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric vehicle contributes to reduce greenhouse gases emissions and get a greater integration of renewable energy. In this context, the implementation of urban buses implies the development of new grid infrastructures in order to carry out the electricity supply required by the charging stations. In order to optimize the size of these infrastructures and to have more power capacity, this contribution proposes the design and the sizing of a fast charging station with a stationary energy storage system (ESS) installed, to supply the energy of the buses that run on one of the lines of Pamplona (Spain). In this contribution, first, the power demanded by the charging point is measured at the fast charging station located at the Public University of Navarre. Second, three energy management strategies are developed with which to use ESS. Finally, the proposed energy management strategies are simulated with the measured data obtained. The results achieved in this contribution show that with a 40 kWh ESS, the power demanded from the grid can be reduced by a whole 70%, that is, from 250 kW to 74 kW. In addition, the power contracted in the electricity rate is reduced too., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018-000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

The generalized bode criterion: application to the dc voltage control of a three-phase photovoltaic grid-tied inverter

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
As renewable energies are becoming more important in the electrical generation system, power electronic converters are facing new design issues related not only to their components but also to their control loops. In this context, the Generalized Bode Criterion (GBC) appears as a good tool to correctly determine stability and to help the controller design. In order to show the potential of the GBC and how it can be applied, this paper studies a dc voltage regulation with compensation of the photovoltaic power in a three-phase photovoltaic grid-tied inverter., info:eu-repo/semantics/embargoedAccess
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Sub-synchronous resonance damping control strategy for DFIG wind turbines

  • Samanes Pascual, Javier
  • Gubía Villabona, Eugenio
  • López Taberna, Jesús
  • Burgos, Rolando
Doubly-fed induction generator (DFIG) wind turbines connected to capacitive series-compensated transmission lines are prone to exhibit oscillatory behavior. The phenomena is called sub-synchronous resonances (SSRs), as these oscillations occur at frequencies below the fundamental component. This paper first develops a modeling methodology for DFIG wind turbines, based on impedance matrices, that is applied to model a real wind farm where SSRs were reported. The stability analysis performed shows how the interaction between the grid-side converter and the rotor-side converter contribute to the instability of DFIG wind energy conversion systems connected to series compensated grids. With this model, we propose a simple sub-synchronous resonance control strategy based on an orthogonal proportional action applied to the rotor currents, and a variable gain in the PI controller adjusted as a function of the DFIG rotational speed. This control strategy depends only on the rotor currents, which are local and already measured variables in any DFIG wind turbine, and is implemented in the rotor side converter, so it does not imply an additional cost at wind farm or wind turbine level and can be applied to any DFIG wind energy conversion system (WECS). Additionally, it proves to be robust for any line impedance series compensation level, and it does not need real-time information concerning the grid at which the wind turbine is connected, or its parameters. A real case study is considered, where the sub-synchronous resonance damping strategy presented in this work is able to stabilize the system for every possible line impedance compensation level., This work was supported by the Agencia Estatal de Investigacion (AEI) (Spanish State Research Agency) under Grant PID2019-110956RB-I00/AEI/10.13039 and Grant DPI-2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Parameter-independent control for battery chargers based on virtual impedance emulation

  • Urtasun Erburu, Andoni
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
An effective battery voltage regulation is fundamental to extend battery lifetime and to avoid overvoltage. However, the design of this regulation is complicated due to the wide battery impedance range, which, when dealing with universal chargers, is dependent not only on the operating point but also on the battery type and size. This paper first shows how the voltage response becomes highly variable when designing the controller as described in the literature. Then, it proposes to emulate virtual impedance in parallel with the battery, making it possible to achieve a voltage control which is independent of battery characteristics. Experimental results are carried out for a new lithium-ion battery with 25 mΩ-impedance and an overused lead-acid battery with 400 mΩ-impedance. For this large impedance variation, the results evidence the problems of the conventional control and validate the superior performance of the proposed control., This work was supported in part by the Spanish State Research Agency (AEI) and FEDER-UE under Grant DPI2016-80641-R and in part by Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Control design and stability analysis of power converters: the MIMO generalized bode criterion

  • Samanes Pascual, Javier
  • Urtasun Erburu, Andoni
  • Barrios Rípodas, Ernesto
  • Lumbreras Magallón, David
  • López Taberna, Jesús
  • Gubía Villabona, Eugenio
  • Sanchis Gúrpide, Pablo
Three-phase dynamic systems and multiphase generators are frequently modeled and controlled in the synchronous reference frame. To properly model the cross-coupling terms in this reference frame, complex vector theory and transfer function matrices are commonly applied, obtaining multiple-input multiple-output (MIMO) dynamic models. The stability of MIMO systems can be assessed through the Nyquist generalized stability criterion. However, the use of the Nyquist diagram complicates the controller design. The Bode diagram is a more intuitive tool for the controller design; however, the Bode stability criterion is not applicable to MIMO systems. In this article, the MIMO generalized Bode criterion is proposed. Since this stability criterion is based on the Nyquist generalized stability criterion, it can be applied to any system. Furthermore, it is simple to use, as it only requires information contained in the open-loop transfer matrix and the Bode diagram. The proposed stability criterion thus offers an interesting tool for the controller design procedure in MIMO systems, as it is shown in this article for two common applications: the current control loop of a power converter, a 2 × 2 system, and the current control loop of two independent power converters in parallel, a 4 × 4 system., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simple and robust PLL algorithm for accurate phase tracking under grid disturbances

  • Arricibita de Andrés, David
  • Marroyo Palomo, Luis
  • Barrios Rípodas, Ernesto
Phase-locked loops (PLLs) are commonly used for the synchronization of grid connected power converters. However, the standard PLL structures are not able to reject grid disturbances such as voltage harmonics, unbalances or DC components in the measured voltage. Since the response of the power converters depends on the grid phase tracking, it is necessary to ensure an accurate synchronization even under distorted conditions. This paper proposes an enhanced PLL structure, which is able to perform fast synchronization even under weak grid conditions and frequency variations. Due to its low computational burden, the proposed PLL allows its implementation on low cost microprocessors., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R and DPI2016-80641-R, and by the Public University of Navarre through a doctoral scholarship. The authors would like to thank INGETEAM POWER TECHNOLOGY for its financial and permanent support.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Grid-forming control for high-power inverters, Técnicas de controles grid-forming para inversores de alta potencia

  • Erdocia Zabala, Ioseba
La crisis medioambiental actual está potenciando el aumento de la demanda de fuentes renovables y sistemas de almacenamiento. La conexión de estas unidades de generación, que se realiza a través de inversores de alta potencia para minimizar costes, está causando el reemplazo completo de los generadores síncronos, dando lugar a que aparezcan más frecuentemente microrredes basadas en inversores de alta potencia que pueden operar conectadas a red, aisladas o en ambos modos. En este escenario, los inversores electrónicos ya no pueden ser controlados en modo grid-following, ya que su funcionamiento como fuentes de corriente podría comprometer la estabilidad del sistema de potencia. Para evitar esto, se ha propuesto controlar los inversores en modo grid-forming, de forma que se comporten como fuentes de tensión, contribuyendo siempre al mantenimiento de la frecuencia y la tensión y siendo capaces de operar de forma aislada. Esta tesis se centra en el desarrollo de estrategias de control grid-forming para inversores de alta potencia. El principal objetivo es diseñar e implementar técnicas que permitan garantizar la operación fiable de los inversores grid-forming en cualquier condición. Por ello, se han abordado los siguientes aspectos: • Modelado del amortiguamiento intrínseco de inversores de alta potencia para diseñar los lazos de control de forma robusta. • Desarrollo de un método que proporcione al control de tensión basado en un único lazo, generalmente implementado en inversores de alta potencia, capacidad para limitar sobrecorrientes. • Análisis de estabilidad de una microrred basada en inversores cuando se utiliza el control droop como estrategia grid-forming. • Diseño de un control droop de frecuencia que garantice la estabilidad transitoria de la microgrid en presencia de sobrecargas y cortocircuitos. • Diseño de un control droop de frecuencia que mejore la estabilidad transitoria de los inversores grid-forming durante huecos de tensión., The present environmental crisis is driving the increase in demand for renewable sources and energy storage systems. The connection of these generation units, made through high-power inverters to minimize costs, is leading to the total replacement of synchronous generators, giving rise to the more frequent appearance of high-power inverter-based microgrids that can work tied to the main grid, islanded or in both operating modes. In this scenario, electronics inverters can no longer be controlled in grid-following mode since their performance as current sources would compromise the stability of the power systems. To avoid this, the concept of controlling the inverters in grid-forming mode has been proposed, in such a way that they perform as voltage sources, always contributing to the maintenance of frequency and voltage and having capability of working under stand-alone mode. This thesis aims to develop grid-forming control strategies for high-power inverters. The main objective is to design and implement techniques that permit ensuring the reliable operation of grid-forming inverters at all possible conditions. Therefore, the following issues are addressed: • Modeling of the inherent damping of high-power inverters to robustly design the control loops. • Development of a method that provides the single-loop voltage control, generally implemented in high-power inverters, with an overcurrent limiting capability. • Stability analysis of inverter-based microgrids when using the conventional droop control as grid-forming strategy. • Design of a frequency droop control that guarantees the transient stability of inverter-based microgrids in stand-alone mode in the presence of overloads or short-circuits. • Design of a frequency droop control that enhances the transient stability of grid-forming inverters in grid-connected mode under voltage dips., This thesis has been funded by the Public University of Navarre through a PhD scholarship. The company Ingeteam Power Technology has supported economically and technically this project under OTRI contracts 20200901027 and 2018901116. Moreover, the Spanish State Research Agency (AEI) and FEDER-UE have supported the investigation under grants PID2019-110956RB-I00 and DPI2016-80641-R., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the technical reliability of lithium-ion batteries in a zero emission polar expedition

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Oficialdegui, Ignacio
This contribution presents a technical analysis of the Lithium-ion batteries (LIBs) used in the WindSled project. In this project, an expedition has been carried out by means of a 0-emission vehicle that have covered more than 2500 kilometers in Antarctica Eastern Plateau pulled by kites. This adventure allowed the performance of 10 scientific experiments with a minimal disturbance of the polar environment. The required electricity for the survival and the scientific experimentation was delivered by flexible PV panels installed on the sled and commercial LIBs. The study performed in this contribution aims at the quantification of the LIBs degradation after the expedition. The results show a capacity fade of 5 % and an internal resistance increase of 30 %. Based on these results, it can be claimed that the LIBs used in the WindSled Project can successfully operate under -40°C. Moreover, these batteries can be used in upcoming expeditions, entailing an improvement from an economical and environmental point of view compared to primary batteries., Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018- 000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Single feedback regulation of the AC voltage for high-power inverters under stand-alone operation

  • Erdocia Zabala, Ioseba
  • Urtasun Erburu, Andoni
  • Marroyo Palomo, Luis
Energy-storage inverters under stand-alone operation must control the output voltage. However, existing methods for instantaneous voltage regulation are not suitable for high-power inverters due to their limited sampling frequency. To avoid this problem, a single feedback voltage loop with feedforward compensation is proposed in this paper, making it possible to actively damp the LCL filter resonance and thus facilitating the controller design. Simulation results demonstrate the fast reference tracking and the high-quality voltage obtained with non-linear loads., This work was supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2016-80641-R and by the Public University of Navarre through a doctoral scholarship. The authors acknowledge the financial and continuous support of Ingeteam Power Technology.