Pasar al contenido principal

GESTION Y CONTROL DE MICRORREDES DE CORRIENTE ALTERNA E INTERCONEXION CON BUSES DE CONTINUA EN MICRORREDES HIBRIDAS

ENE2015-64087-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control scheme for a multiple-output DC/DC current source parallel resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The aim of this paper is to regulate the output voltages of a multiple-output DC/DC class-D current source parallel resonant converter. To this end, a sliding mode control scheme is presented consisting of an outer voltage loop, an inner current loop and a robust modulator. To devise this control scheme, the averaged large signal model of the converter is derived. In addition, this model is used to determine the stability range of the controller parameters. Some simulation results are provided to validate the expected features of the presented control configuration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of clock drift impact over droop-free distributed control for industrial microgrids

  • Torres Martínez, Javier
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Ghahderijani, Mohammad Moradi
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., It is well-know that in systems composed of several digital processors, clock signals of individual units differ from each other due to clock drifts. This paper investigates the effect of clock drifts from voltage source inverters (VSI) in industrial microgrids. Particularly, a primary/secondary droopfree distributed control scheme is considered in order to evaluate its robustness against clock drifts. The study is carried out by fully experimental means using a laboratory microgrid., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Consensus for active power sharing and frequency restoration in islanded microgrids subject to drifting clocks

  • Rosero Chandi, Carlos Xavier
  • Martí Colom, Pau|||0000-0002-5189-0782
  • Velasco García, Manel|||0000-0002-0764-3063
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The application of consensus theory in the control of islanded microgrids (MG) is gaining increased attention because it facilitates the development of distributed control solutions. In particular, its application to active power sharing and frequency regulation has lead to satisfactory results. This paper analyses the effect that local clock drifts have in the parallel operation of voltage source inverters (VSIs) in islanded microgrids (MG) when governed by a distributed consensus algorithm. Analytical expressions that relate the steady-state frequency and active power as a function of each VSI local drift are provided. These expressions allow extracting tuning rules for the consensus-based control algorithm. Simulation results permit corroborating the theoretical analysis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Communication-aware consensus for frequency restoration in islanded microgrids

  • Martí Colom, Pau|||0000-0002-5189-0782
  • Velasco García, Manel|||0000-0002-0764-3063
  • Martín Rull, Enric Xavier|||0000-0002-6775-5470
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
MicroGrids (MGs) include spatially distributed generation (DG) systems and loads that may require operating autonomously in islanded mode. The operation of islanded MGs can benefit from consensus theory and practice, which are the foundations of distributed control. One of the main features of consensus strategies is that they rely on a cooperative scheme where inverters are required to communicate with their neighbors. Therefore properties of the communication network become fundamental. The contribution of this paper is twofold. First, it analyses the impact that communication properties such as transmission interval and message dropouts have in a given consensus-based frequency restoration strategy. Second, new design guidelines for the consensus policy are derived considering the communication dynamics as an opportunity for performance improvement., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Voltage sag mitigation in a PV-based industrial microgrid during grid faults

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Torres Martínez, Javier
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The growing interests in industrial microgrid and its high power rating, have made it as a good candidate for voltage support purposes. The aim of this paper is to present a reactive current injection control strategy for a photovoltaic-based industrial microgrid during voltage sags. During the sag, depending on the grid code requirements, the maximum rated reactive current should be injected by the local inverters. The current can be injected through the positive and negative sequences depending on the sag characteristics and power rating of the local inverters. Moreover, to prevent over voltage, the higher phase voltage should be raised to a predefined maximum boundary. Finally, some selected simulation results are presented in order to show the features of the control scheme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A communication-less control scheme for a variable air-gap wireless energy transfer system using current source resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Rey López, Juan Manuel
  • Torres Martínez, Javier
  • Garnica López, Miguel Andrés
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a robust control method for wireless energy transfer systems using current source resonant converter without any communication network. The proposed control strategy is valid even for systems with variable air-gap. Output voltage regulation, resonant frequency tracking and zero voltage switching condition are the main control objectives. The control strategy includes a simple modulation technique for the primary side class-D inverter and a sliding mode controller for the secondary-side full-bridge rectifier. Theoretical features of the presented control system are tested by some selected simulation results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multi-layer active power and frequency control strategy for industrial microgrids

  • Rey, Juan Manuel
  • Solano, Javier
  • Torres Martínez, Javier
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Industrial microgrids require control strategies that guarantee high reliability and power quality. In this paper a multi-layer active power and frequency control strategy for industrial microgrids is presented. It is composed by a threelayer hierarchical scheme. The first control layer is based on the droop method. The secondary control layer is based on an eventdriven communication scheme that launches a protocol which controls the secondary terms. The tertiary control layer calculates an optimal economical dispatch. The proposed control guarantees an excellent performance in terms of frequency restoration and power sharing. Experimental results obtained on a laboratory microgrid are presented to validate the performance of the proposed control scheme., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of clock drift impact over droop-free distributed control for industrial microgrids

  • Torres Martínez, Javier
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Ghahderijani, Mohammad Moradi
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., It is well-know that in systems composed of several digital processors, clock signals of individual units differ from each other due to clock drifts. This paper investigates the effect of clock drifts from voltage source inverters (VSI) in industrial microgrids. Particularly, a primary/secondary droopfree distributed control scheme is considered in order to evaluate its robustness against clock drifts. The study is carried out by fully experimental means using a laboratory microgrid., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Voltage sag mitigation in a PV-based industrial microgrid during grid faults

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • García de Vicuña Muñoz de la Nava, José Luis
  • Camacho Santiago, Antonio
  • Torres Martínez, Javier
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The growing interests in industrial microgrid and its high power rating, have made it as a good candidate for voltage support purposes. The aim of this paper is to present a reactive current injection control strategy for a photovoltaic-based industrial microgrid during voltage sags. During the sag, depending on the grid code requirements, the maximum rated reactive current should be injected by the local inverters. The current can be injected through the positive and negative sequences depending on the sag characteristics and power rating of the local inverters. Moreover, to prevent over voltage, the higher phase voltage should be raised to a predefined maximum boundary. Finally, some selected simulation results are presented in order to show the features of the control scheme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A communication-less control scheme for a variable air-gap wireless energy transfer system using current source resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • Rey López, Juan Manuel
  • Torres Martínez, Javier
  • Garnica López, Miguel Andrés
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a robust control method for wireless energy transfer systems using current source resonant converter without any communication network. The proposed control strategy is valid even for systems with variable air-gap. Output voltage regulation, resonant frequency tracking and zero voltage switching condition are the main control objectives. The control strategy includes a simple modulation technique for the primary side class-D inverter and a sliding mode controller for the secondary-side full-bridge rectifier. Theoretical features of the presented control system are tested by some selected simulation results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control scheme for a multiple-output DC/DC current source parallel resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Guzmán Solà, Ramon
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The aim of this paper is to regulate the output voltages of a multiple-output DC/DC class-D current source parallel resonant converter. To this end, a sliding mode control scheme is presented consisting of an outer voltage loop, an inner current loop and a robust modulator. To devise this control scheme, the averaged large signal model of the converter is derived. In addition, this model is used to determine the stability range of the controller parameters. Some simulation results are provided to validate the expected features of the presented control configuration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Communication-aware consensus for frequency restoration in islanded microgrids

  • Martí Colom, Pau
  • Velasco García, Manel
  • Martín Rull, Enric Xavier
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
MicroGrids (MGs) include spatially distributed generation (DG) systems and loads that may require operating autonomously in islanded mode. The operation of islanded MGs can benefit from consensus theory and practice, which are the foundations of distributed control. One of the main features of consensus strategies is that they rely on a cooperative scheme where inverters are required to communicate with their neighbors. Therefore properties of the communication network become fundamental. The contribution of this paper is twofold. First, it analyses the impact that communication properties such as transmission interval and message dropouts have in a given consensus-based frequency restoration strategy. Second, new design guidelines for the consensus policy are derived considering the communication dynamics as an opportunity for performance improvement., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Consensus for active power sharing and frequency restoration in islanded microgrids subject to drifting clocks

  • Rosero Chandi, Carlos Xavier
  • Martí Colom, Pau
  • Velasco García, Manel
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The application of consensus theory in the control of islanded microgrids (MG) is gaining increased attention because it facilitates the development of distributed control solutions. In particular, its application to active power sharing and frequency regulation has lead to satisfactory results. This paper analyses the effect that local clock drifts have in the parallel operation of voltage source inverters (VSIs) in islanded microgrids (MG) when governed by a distributed consensus algorithm. Analytical expressions that relate the steady-state frequency and active power as a function of each VSI local drift are provided. These expressions allow extracting tuning rules for the consensus-based control algorithm. Simulation results permit corroborating the theoretical analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multi-layer active power and frequency control strategy for industrial microgrids

  • Rey, Juan Manuel
  • Solano, Javier
  • Torres Martínez, Javier
  • Miret Tomàs, Jaume
  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Industrial microgrids require control strategies that guarantee high reliability and power quality. In this paper a multi-layer active power and frequency control strategy for industrial microgrids is presented. It is composed by a threelayer hierarchical scheme. The first control layer is based on the droop method. The secondary control layer is based on an eventdriven communication scheme that launches a protocol which controls the secondary terms. The tertiary control layer calculates an optimal economical dispatch. The proposed control guarantees an excellent performance in terms of frequency restoration and power sharing. Experimental results obtained on a laboratory microgrid are presented to validate the performance of the proposed control scheme., Peer Reviewed, Postprint (author's final draft)