Pasar al contenido principal

GASIFICACION DE BIOMASA MEDIANTE TECNOLOGIAS DE CHEMICAL LOOPING PARA PRODUCCION DE GAS DE SINTESIS/H2 CON CAPTURA DE CO2

ENE2017-89473-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biomass combustion with CO2 capture in a 20 kWth CLC plant

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., Bioenergy with Carbon Capture and Storage (BECCS) represents an interesting option to achieve the negative CO2 emissions needed to comply with the climate challenges set in the Paris Agreement (COP21-2015). Chemical Looping Combustion (CLC) technology has revealed as one of the CO2 capture technologies with less energy penalty and lower cost. CLC combined with biomass could become a promising BECCS technology. The objective of this work was to asses the feasibility of the CLC technology using biomass as fuel as a future BECCS technology., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Projects: ENE2014-56857-R, ENE2016-77982-R and ENE2017-89473-R) and European Regional Development Fund (ERDF). A. Pérez-Astray thanks MINECO for the BES-2015-074651 co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

CO2 capture by Chemical Looping Processes using C-fuels

  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Adánez Elorza, Juan
1 figure.-- Work presented at the Carbon 2018 ´"The World Conference of Carbon", Madrid (Spain), 01st-6th July, According to the IPCC, warming of the climate system is unequivocal and this is mainly consequence of the increase in the CO2 concentration in the atmosphere. In addition, “Human influence on the climate system is clear, and recent anthropogenic emissions of greenhouse gases are the highest in history”. These emissions are mainly consequence of the burning of C-fuels, mostly fossil fuels, which result in a net increase in carbon concentration in the atmosphere, soil and oceans. In fact, the natural carbon cycle in the earth is being affected. Limiting climate change would require substantial and sustained reductions in greenhouse gas emissions. The measures considered for the reduction of CO2 emissions to the atmosphere include the improvement in the use and generation of energy, the use of nuclear energy, the boost of energy generation from renewable sources and the CO2 capture and storage (CCS)., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), by the European Regional Development Fund (ERDF), by the CSIC (201780E035), and by the Government of Aragón. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Syngas production via Biomass Chemical Looping Gasification (BCLG) in a 50 kWth unit using ilmenite as oxygen carrier

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
5 figures, 1 table.-- Talk delivered at the 24th International Conference on Fluidized Bed Conversion, FBC24, at Chalmers University of Technology, in Gothenburg (Sweden)., The use of liquid biofuels is considered one of the most relevant ways to achieve the reduction of greenhouse gas (GHG) emissions in the sector of transport, and more specifically in aviation. A possible route is the use of biogenic waste from the agriculture and forestry sector to obtain synthesis gas via gasification and then the Fischer-Tropsch synthesis to obtain liquid biofuels. Among the different technologies available for the gasification process, Biomass Chemical Looping Gasification (BCLG) represents an innovative process that allows the generation of non-nitrogen diluted synthesis gas under autothermic conditions and with low tars content. By using carbon-neutral biomass as fuel, even net negative emissions could be achieved if the BCLG process is combined with CO2 storage. This work presents an experimental campaign of 40 hours of continuous operation in a 50 kWth BCLG unit developed inside the EU H2020 CLARA Project. Wheat straw pellets with additives were used as fuel feedstock and ilmenite as solid oxygen carrier. This work aimed to investigate the effect of different operational variables such as the fuel reactor temperature, the mean residence time of solids in the fuel reactor, the oxygen-to-biomass ratio (controlled by the oxygen fed into the air reactor) and the gas velocity in the carbon stripper, on the process performance and the syngas yield. Unlike previous studies, effective oxygen-to-biomass ratios that consider the right amount of oxygen that reacts with the oxygen carrier both in the fuel and air reactors (λeff,FR and λeff,AR, respectively) were defined The main factor affecting the syngas yield and the cold gas efficiency was λeff,FR, since it represents the amount of lattice oxygen that actually reacts in the fuel reactor during syngas combustion. However, it showed a low impact on the production of light hydrocarbons (CH4 and C2-C3). The temperature and mean residence time in the fuel reactor showed a considerable effect on the char conversion in the fuel reactor, since an increase in those factors caused an increase in the reaction rates or in the contact time between the oxygen carrier and biomass in the fuel reactor, respectively. Finally, the carbon stripper did not show the ability to separate the solid oxygen carrier from the unconverted char entrained from the fuel reactor, as the char still retained its initial pellet form. Therefore, an increase in gas velocity of carbon stripper promoted the char by-pass to the air reactor, increasing both the biomass conversion in the unit and the fraction of carbon emitted in the air reactor., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE-ENE2017-89473R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Syngas production via Biomass Chemical Looping Gasification (BCLG) in a 50 kWth unit using ilmenite as oxygen carrier

  • Condori, Óscar
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
8 figures, 1 table.--Talk delivered at the 6th International Conference on Chemical Looping, 19-22 September 2022, Zaragoza, Spain., Biomass Chemical Looping Gasification (BCLG) is an innovative process that uses lattice oxygen from a solid oxygen carrier to produce high-quality synthesis gas without CO2 emissions. It is well known that one of the main targets for the reduction of greenhouse gas emissions (GHG) is to replace the use of fossil fuels in the transport sector with renewable sources. In this work, the BCLG technology is used to obtain clean synthesis gas from biomass for the production of liquid biofuels through Fischer Tropsch (FT) synthesis. The BCLG process is based on the circulation of a solid oxygen carrier between two interconnected fluidized bed reactors, the fuel and air reactors, providing the oxygen needed for the partial oxidation of the biomass to generate a non-nitrogen diluted syngas with low tar content. Also, the oxygen carrier is responsible for transporting the heat required for the endothermic reactions occurring in the fuel reactor from the heat generated in the exothermic reactions occurring in the air reactor, thus reaching autothermal conditions. In addition, negative emissions could be achieved by combining this technology with CO2 storage since biomass is a carbon-neutral fuel. The experimental campaign of this work was carried out in a BCLG unit at 18 kWth power during 60 hours of continuous operation with ilmenite as oxygen carrier and wheat straw pellets as fuel. The main factors affecting the syngas production was the oxygen-to-biomass ratio and char conversion. Increasing temperature showed a considerable effect on the char conversion in the fuel reactor since caused an increase in the gasification rate; also, the char conversion was affected by the mean residence time in the fuel reactor. The existing carbon stripper in the CLG unit did not show the ability to separate the unconverted char entrained from the fuel reactor since char still retained its initial pellet form. However, carbon stripper behaves as a secondary gasifier when using steam as fluidizing agent increasing char conversion, syngas yield and carbon capture efficiency. Finally, low tar generation was found during continuous operation, reaching values below 3.5 g/kg of dry biomass., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE-ENE2017-89473-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biomass chemical looping gasification for syngas production using a copper-based oxygen carrier in a 1.5 kWth unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Cabello Flores, Arturo
9 figures, 3 tables.-- Work presented at 6th International Conference on Chemical Looping, 19-22 September 2022, Zaragoza, Spain., Biomass Chemical Looping Gasification (BCLG) is a novelty technology which enables the production of renewable syngas without the need for external power supply and achieving negative carbon emissions. In this work, the behavior a synthetic Cu-based (14 wt% CuO) oxygen carrier, Cu14Al_ICB, was tested during 45 h in a 1.5 kWth continuous unit using pine sawdust as fuel. The effect of oxygen-to- fuel ratio (𝛌) and gasification temperature on syngas composition and gasification parameters, such as fuel conversion, carbon capture, cold gas efficiency, and syngas yield, was studied. The decrease of oxygen-to-fuel ratio increased the concentration of H2 and CO, while the increase in gasification temperature mainly improved char gasification, also promoting H2 and CO generation. High amounts of syngas with low CH4 concentrations (~2.3 mol/kg of dry biomass) were obtained at any condition due to the catalytic effect of metallic copper on CH4 reforming reactions. Values of syngas yield close to the obtained with Ni-based solids were achieved. The oxygen carrier also had a high effect on tar removal, reaching tar concentration values similar to those obtained by operating under Chemical Looping Combustion conditions. A particle lifetime of ~8000 h was inferred for this oxygen carrier, which is the highest lifetime obtained so far for an oxygen carrier working under BCLG conditions. In addition, the mechanical properties, reactivity and oxygen transport capacity were maintained during the campaign. Therefore, the Cu14Al_ICB oxygen carrier has proven to be an excellent material for the BCLG process., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB- I00, funded by MICIN/AEI/10.13039/501100011033. Iván Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE-086217 predoctoral fellowship. A. Cabello thanks the Grant IJC2019- 038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed