Pasar al contenido principal

INVESTIGACION DE TECNICAS COMPTON PARA APLICACIONES MEDICAS.

FPA2017-85611-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

First results with MACACO II: second prototype of a Compton telescope

  • Ros García, Ana
  • Barrientos, Luis
  • Barrio Toala, J.
  • Bernabéu, José
  • Borja-Lloret, Marina
  • Dendooven, P.
  • Etxebeste, Ane
  • Gabarda, L.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Marco Hernández, Ricardo
  • Muñoz, Enrique
  • Oliver, Josep F.
  • Ozoemelan, I.
  • Praena, Javier
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Llosá, Gabriela
Trabajo presentado en el IEEE Nuclear Science Symposium and Medical Imaging Conference, celebrado en Sydney (Australia), del 10 al 17 de noviembre de 2018, The IRIS group at IFIC Valencia is developing a three-layer Compton camera for treatment monitoring in ion beam therapy. The system is composed of three detector planes, each made of a LaBr3 monolithic crystal coupled to SiPM arrays. The first prototype (MACACO) was fully characterised in the laboratory and in beam tests demonstrating the feasibility of the proposed technology. A second prototype (MACACO II), described in this work, is currently being developed to improve performance. The SiPM arrays have been replaced by newer models, leading to an improved detector energy resolution which translates into a higher spatial resolution of the telescope. A new coincidence board allows acquisition of data with any two or all three detectors simultaneously. In addition, the image reconstruction code has been improved with an accurate model of the sensitivity matrix. The device has also been tested in two accelerator facilities. The first involved a proton beam of 18 MeV impinging a graphite target. The results allowed the successful reconstruction of two target positions separated by 5 mm. The second test beam used protons of 150 MeV impinging on a PMMA target. Preliminary analysis results show prompt-gamma energy spectra as expected for these proton energies. Analysis of this data is ongoing, with the aim of reconstructing the Bragg peak profilein the PMMA target. Further improvements to the readout electronics are also underway., This work was supported in part by the European Commission's 7th Framework Programme through the ENVISION project (G. A. num 241851) and by the Spanish Ministerio de Ciencia, Innovación y Universidades (FPA2014-53599-R, FPA2017-85611-R and IFIC's Center of Excellence Severo Ochoa SEV-2014-0398). Group members are supported by Ramón y Cajal, UVEG Atraccio de Talent and Generalitat Valenciana contracts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental results with a Compton telescope prototype: MACACO II

  • Borja-Lloret, Marina
  • Barrientos, Luis
  • Barrio Toala, J.
  • Bernabéu, José
  • Dendooven, P.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Muñoz, Enrique
  • Oliver, Josep F.
  • Ozoemelan, I.
  • Ros García, Ana
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Llosá, Gabriela
Trabajo presentado en el 17th Annual Meeting and Training, celebrado en Caen (Francia) del 1 al 3 de julio de 2019, Purpose Real-time monitoring is still a challenge in hadrontherapy. With this aim, a Compton telescope prototype (MACACO) has been developed by the IRIS group at IFIC-Valencia within the European project ENVISION. The second prototype MACACO II is an upgrade developed with the purpose of enhancing its performance. Material and Methods MACACO II consists of three layers of LaBr3 monolithic crystals coupled to silicon photomultiplier (SiPM) arrays. New crystals have been coupled to 8x8 pixel SiPM arrays from Hamamatsu Photonics (S13361-3050AE-08). Moreover, an improved image reconstruction code including an accurate model for the sensitivity matrix has been implemented. The telescope has been characterized in the laboratory with 22Na and 152Eu sources and tested in two accelerator centres. The first test took place at CNA (Sevilla) with a 18 MeV proton beam impinging on a graphite target in order to produce 4.4 MeV gamma rays. A second test was held in KVI-CART (Groningen) with a 150 MeV proton beam hitting a PMMA target. Monte Carlo simulations have been carried out with GATE V 7.0. Results In the laboratory, the energy resolution has been improved and an angular resolution of 4.6° has been achieved, which together with the improved reconstruction code, have led to a better image quality. The efficiency measured with two planes in coincidence at 1275 keV is 1.0x10-3. Monte Carlo simulations result in a good correlation with the experimental parameters. Regarding the In-beam experiments, two target positions separated by 5 mm have been reconstructed from the CNA test-beam. Furthermore, KVI-CART test-beam results show that Bragg distribution correlates to the PMMA position. Conclusions MACACO II has shown a better performance than the previous prototype. The testbeam results have demonstrated the ability to reconstruct different positions. Further improvements are ongoing in order to achieve the required performance for the application., This work was supported in part by the European Commission's 7th Framework Programme through the ENVISION project (G. A. num 241851), by the Spanish Ministerio de Ciencia, Innovación y Universidades (FPA2014-53599-R, FPA2017-85611-R and IFIC's Center of Excellence Severo Ochoa SEV-2014-0398) and by H2020 ENSAR2- MediNet (project number 654002). Group members are supported by Ramón y Cajal, UVEG Atraccio de Talent and Spanish Ministerio de Ciencia, Innovación y Universidades.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Results with MACACO II: A Compton telescope for hadron therapy monitoring

  • Barrientos, Luis
  • Borja-Lloret, Marina
  • Dendooven, P.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Muñoz, Enrique
  • Oliver, Josep F.
  • Ozoemelan, I.
  • Ros García, Ana
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Viegas, R.
  • Llosá, Gabriela
Trabajo presentado en la 24th International Conference on Medical Physics, celebrada en Santiago de Chile, del 8 al 11 de septiembre, Hadron therapy (HT) is a technique used in cancer treatment that consists in the irradiation of tumours using light ions or protons instead of photons. HT treatment monitoring in real-time is one of the main challenges addressed nowadays. The IRIS group (http://ific.uv.es/iris) at IFIC-Valencia is developing a Compton telescope with this purpose. The system is made of three LaBr3 detector planes coupled to silicon photomultipliers (SiPMs). A first prototype (MACACO: Medical Applications CompAct COmpton camera) was successfully developed, with promising results. A second version has been developed with the aim of improving the system performance, including new detectors for the first two planes and an improved image reconstruction code, improving significantly the performance tests in laboratory and accelerator facilities. The performance improvement of MACACO II was verified through experimental tests. In addition, Monte Carlo simulations were made with GATE v 7.0 getting a good correlation with the experimental measurements. In this poster we present results corresponding to the two-layer layout with the new detectors., This work has received funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (FPA2017-85611-R and IFIC's Center of Excellence Severo Ochoa SEV-2014-0398) and from EC H2020 ENSAR2/MediNet (project number 654002)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental characterization of MACACO III Compton telescope for hadron therapy treatment monitoring, Caracterización del telescopio Compton MACACO III para monitorización de terapia hadrónica

  • Barrientos, Luis
  • Borja-Lloret, Marina
  • Casaña, José Vicente
  • García López, J.
  • Hueso-González, F.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Muñoz, Enrique
  • Ros García, Ana
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Viegas, R.
Trabajo presentado a las Jornadas de Física Médica, organizadas por la Real Sociedad Española de Física y el IFIC a través de la instalación de Física Médica IFIMED, celebradas virtualmente del 14 al 15 de diciembre de 2020., La terapia hadrónica es una técnica de tratamiento del cáncer consistente en la irradiación de tumores con protones u otros iones ligeros. El uso de esta técnica se ha incrementado por su ventaja de maximización de la dosis depositada sobre un tumor y de reducción de toxicidad del tratamiento comparado con la radioterapia convencional. Sin embargo, una de sus desventajas es la dificultad en la monitorización del rango del haz. Las cámaras Compton han resurgido como posibles candidatas para la monitorización de la terapia hadrónica, mediante la detección de los fotones producidos en la desexcitación de núcleos de los tejidos irradiados.El grupo IRIS del IFIC en Valencia se encuentra desarrollando un prototipo de una cámara Compton con la finalidad de ser empleada en monitorización de la terapia hadrónica. El prototipo MACACO (Medical Applications CompAct COmpton camera) se compone de cristales centelleadores de LaBr3 acoplados a una matriz de fotomultiplicadores de silicio. Con la finalidad de mejorar las prestaciones del prototipo, se ha construido una tercera versión que presenta un rendimiento mejorado respecto de sus predecesores. Los nuevos detectores de MACACO III se componen de cristales continuos de LaBr3 de 25,8 x 25,8 mm2 y 5 mm. El sistema de lectura AliVATA, desarrollado por el grupo, opera el ASIC VATA64HDR16 utilizado como electrónica de lectura. La caracterización de los detectores en el laboratorio se ha realizado utilizando fuentes radiactivas de 22Na, 152Eu y 137Cs. El mejor valor de resolución energética obtenido ha sido de 4.8 % FWHM a 662 keV, resolución angular de 6.0° FWHM a 1275 keV y eficiencia de detección en coincidencias de 1 x 10−3 a 1275 keV. A partir de los datos experimentales se han reconstruido imágenes de una fuente puntual de 22Na seleccionando eventos dobles y triples. El código de reconstrucción de MACACO III produce imágenes cuatridimensionales (energía y posición) usando eventos dobles o triples. Imágenes con la combinación de estos dos tipos de eventos ha sido recientemente conseguida. La FWHM de las imágenes reconstruidas fue de 2.4 mm y 3.3 mm FWHM a 1275 keV respectivamente a una distancia de la fuente de 70 mm. Con la finalidad de reproducir los resultados experimentales, MACACO III ha sido simulado en GATE v8.2 utilizando el módulo CCMod, obteniendo una buena correlación con los datos experimentales. MACACO III también ha sido caracterizado en aceleradores, con el fin de evaluar su respuesta en escenarios más realistas. Recientemente se ha testeado en el CNA (Sevilla) en un haz de protones de 18 MeV sobre un blanco de grafito. Los datos experimentales fueron tomados con el blanco en distintas posiciones y diferentes intensidades de haz. Imágenes con dos y tres planos fueron reconstruidas exitosamente en cada caso pudiendo distinguir distancias de 1 mm de separación del blanco. Futuras mejoras y pruebas en centros clínicos están en curso para alcanzar las prestaciones requeridas para la aplicación., This work has received funding from the Spanish Ministerio de Ciencia e Innovación (PID2019-110657RB-I00, FPA2017-85611-R and SEV-2014-0398), from Generalitat Valenciana (AICO/2019/070), from CSIC PIC 2018 programme (N2018FR0032) and from European Commission H2020 ENSAR2-MediNet (project number 654002). Group members are supported by Ramón y Cajal, SEJI and GENT programmes, UVEG Atracció de Talent, Generalitat Valenciana and Spanish Ministerio de Universidades FPU predoctoral contracts, Peer reviewed