Pasar al contenido principal

DETECTORES PARA APLICACIONES MEDICAS

FPA2014-53599-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First Images of a Three-layer compton Telescope prototype for Treatment Monitoring in hadron Therapy

  • Llosá, Gabriela
  • Trovato, Marco
  • Etxebeste, Ane
  • Muñoz, Enrique
  • Lacasta, C.
  • Rafecas, Magdalena
  • Solaz, Carles
  • Solevi, Paola
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Oliver-Guillén, José Francisco|||0000-0002-8585-9345
[EN] A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomulti-plier arrays. Na-22 sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests., This work was supported in part by the European Commissions 7th Framework Programme through the ENVISION (G. A. num 241851) project and the Marie Curie ITN ENTERVISION (G. A. num 264552), by the Spanish Ministerio de Economia y Competitividad (FPA2010-14891, FIS2011-14585-E, and FPA2014-53599-R), the UVEG (UV-INV-PRECOMP12-80755), and the Generalitat Valenciana (GV/2013/133 and GVISIC/ 2012/020). Group members are supported by Ramón y Cajal, UVEG Atraccio de Talent, and Generalitat Valenciana contracts.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D position determination in monolithic crystals coupled to SiPMs for PET

  • Etxebeste, Ane
  • Muñoz, Enrique
  • Solaz, Carles
  • Llosá, Gabriela
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Oliver-Guillén, José Francisco|||0000-0002-8585-9345
[EN] The interest in using continuous monolithic crystals in positron emission tomography (PET) has grown in the last years. Coupled to silicon photomultipliers (SiPMs), the detector can combine high sensitivity and high resolution, the two main factors to be maximized in a positron emission tomograph. In this work, the position determination capability of a detector comprised of a 12 x 12 x 10 mm(3) LYSO crystal coupled to an 8 x 8-pixel array of SiPMs is evaluated. The 3D interaction position of.-rays is estimated using an analytical model of the light distribution including reflections on the facets of the crystal. Monte Carlo simulations have been performed to evaluate different crystal reflectors and geometries. The method has been characterized and applied to different cases. Intrinsic resolution obtained with the position estimation method used in this work, applied to experimental data, achieves sub-millimetre resolution values. Average resolution over the detector surface for 5 mm thick crystal is similar to 0.9 mm FWHM and similar to 1.2 mm FWHM for 10 mm thick crystal. Depth of interaction resolution is close to 2 mm FWHM in both cases, while the FWTM is similar to 5.3 mm for 5 mm thick crystal and similar to 9.6 mm for 10 mm thick crystal., This work was supported in part by the Spanish Ministerio de Economia y Competitividad (FPA2014-53599-R), the UVEG (UV-INV-PRECOMP12-80755) and the Generalitat Valenciana (GV/2013/133 and GVISIC/2012/020). Group members are supported by Ramon y Cajal, UVEG Atraccio de Talent and Generalitat Valenciana contracts.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of VATA64HDR16 ASIC for medical physics applications based on continuous crystals and SiPMs

  • Barrio-Toala, John|||0000-0001-5181-2146
  • Oliver-Guillén, José Francisco|||0000-0002-8585-9345
  • Etxebeste, A.
  • Lacasta, C.
  • Muñoz, E.
  • Solaz, C.
  • Llosá, G.
[EN] Detectors based on Silicon Photomultipliers (SiPMs) coupled to continuous crystals are being tested in medical physics applications due to their potential high resolution and sensitivity. To cope with the high granularity required for a very good spatial resolution, SiPM matrices with a large amount of elements are needed. To be able to read the information coming from each individual channel, dedicated ASICs are employed. The VATA64HDR16 ASIC is a 64-channel, charge-sensitive amplifier that converts the collected charge into a proportional current or voltage signal. A complete assessment of the suitability of that ASIC for medical physics applications based on continuous crystals and SiPMs has been carried out. The input charge range is linear from 20 pC up to 55 pC. The energy resolution obtained at 511 keV is 10% FWHM with a LaBr3 crystal and 16% FWHM with a LYSO crystal. A coincidence timing resolution of 24 ns FWHM is obtained with two LYSO crystals., This work was supported in part by the European Commission's 7th Framework Programme through the ENVISION project (G. A. num 241851), by the Spanish Ministerio de Economia y Competitividad (FPA2014-53599-R), the UVEG (UV-INV-PRECOMP12-80755) and the Generalitat Valenciana (GV/2013/133 and GVISIC/2012/020). Group members are supported by Ramon y Cajal, UVEG Atraccio de Talent and Generalitat Valenciana contracts.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

First results with MACACO II: second prototype of a Compton telescope

  • Ros García, Ana
  • Barrientos, Luis
  • Barrio Toala, J.
  • Bernabéu, José
  • Borja-Lloret, Marina
  • Dendooven, P.
  • Etxebeste, Ane
  • Gabarda, L.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Marco Hernández, Ricardo
  • Muñoz, Enrique
  • Oliver, Josep F.
  • Ozoemelan, I.
  • Praena, Javier
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Llosá, Gabriela
Trabajo presentado en el IEEE Nuclear Science Symposium and Medical Imaging Conference, celebrado en Sydney (Australia), del 10 al 17 de noviembre de 2018, The IRIS group at IFIC Valencia is developing a three-layer Compton camera for treatment monitoring in ion beam therapy. The system is composed of three detector planes, each made of a LaBr3 monolithic crystal coupled to SiPM arrays. The first prototype (MACACO) was fully characterised in the laboratory and in beam tests demonstrating the feasibility of the proposed technology. A second prototype (MACACO II), described in this work, is currently being developed to improve performance. The SiPM arrays have been replaced by newer models, leading to an improved detector energy resolution which translates into a higher spatial resolution of the telescope. A new coincidence board allows acquisition of data with any two or all three detectors simultaneously. In addition, the image reconstruction code has been improved with an accurate model of the sensitivity matrix. The device has also been tested in two accelerator facilities. The first involved a proton beam of 18 MeV impinging a graphite target. The results allowed the successful reconstruction of two target positions separated by 5 mm. The second test beam used protons of 150 MeV impinging on a PMMA target. Preliminary analysis results show prompt-gamma energy spectra as expected for these proton energies. Analysis of this data is ongoing, with the aim of reconstructing the Bragg peak profilein the PMMA target. Further improvements to the readout electronics are also underway., This work was supported in part by the European Commission's 7th Framework Programme through the ENVISION project (G. A. num 241851) and by the Spanish Ministerio de Ciencia, Innovación y Universidades (FPA2014-53599-R, FPA2017-85611-R and IFIC's Center of Excellence Severo Ochoa SEV-2014-0398). Group members are supported by Ramón y Cajal, UVEG Atraccio de Talent and Generalitat Valenciana contracts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental results with a Compton telescope prototype: MACACO II

  • Borja-Lloret, Marina
  • Barrientos, Luis
  • Barrio Toala, J.
  • Bernabéu, José
  • Dendooven, P.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lacasta Llácer, Carlos
  • Muñoz, Enrique
  • Oliver, Josep F.
  • Ozoemelan, I.
  • Ros García, Ana
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Llosá, Gabriela
Trabajo presentado en el 17th Annual Meeting and Training, celebrado en Caen (Francia) del 1 al 3 de julio de 2019, Purpose Real-time monitoring is still a challenge in hadrontherapy. With this aim, a Compton telescope prototype (MACACO) has been developed by the IRIS group at IFIC-Valencia within the European project ENVISION. The second prototype MACACO II is an upgrade developed with the purpose of enhancing its performance. Material and Methods MACACO II consists of three layers of LaBr3 monolithic crystals coupled to silicon photomultiplier (SiPM) arrays. New crystals have been coupled to 8x8 pixel SiPM arrays from Hamamatsu Photonics (S13361-3050AE-08). Moreover, an improved image reconstruction code including an accurate model for the sensitivity matrix has been implemented. The telescope has been characterized in the laboratory with 22Na and 152Eu sources and tested in two accelerator centres. The first test took place at CNA (Sevilla) with a 18 MeV proton beam impinging on a graphite target in order to produce 4.4 MeV gamma rays. A second test was held in KVI-CART (Groningen) with a 150 MeV proton beam hitting a PMMA target. Monte Carlo simulations have been carried out with GATE V 7.0. Results In the laboratory, the energy resolution has been improved and an angular resolution of 4.6° has been achieved, which together with the improved reconstruction code, have led to a better image quality. The efficiency measured with two planes in coincidence at 1275 keV is 1.0x10-3. Monte Carlo simulations result in a good correlation with the experimental parameters. Regarding the In-beam experiments, two target positions separated by 5 mm have been reconstructed from the CNA test-beam. Furthermore, KVI-CART test-beam results show that Bragg distribution correlates to the PMMA position. Conclusions MACACO II has shown a better performance than the previous prototype. The testbeam results have demonstrated the ability to reconstruct different positions. Further improvements are ongoing in order to achieve the required performance for the application., This work was supported in part by the European Commission's 7th Framework Programme through the ENVISION project (G. A. num 241851), by the Spanish Ministerio de Ciencia, Innovación y Universidades (FPA2014-53599-R, FPA2017-85611-R and IFIC's Center of Excellence Severo Ochoa SEV-2014-0398) and by H2020 ENSAR2- MediNet (project number 654002). Group members are supported by Ramón y Cajal, UVEG Atraccio de Talent and Spanish Ministerio de Ciencia, Innovación y Universidades.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

System characterization and performance studies with MACACO III Compton camera

  • Barrientos, Luis
  • Borja-Lloret, Marina
  • Casaña, José Vicente
  • Hueso-González, F.
  • Ros, A.
  • Roser, J.
  • Senra, C.
  • Solaz, Carles
  • Viegas, R.
  • Llosá, Gabriela
The IRIS group of IFIC-Valencia has developed a Compton camera prototype. The system detectors are made of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. Two models of silicon photomultipliers arrays with different micro pixel pitch (25 and 50 μm) have been chosen as possible candidates to improve the response of the new system. Characterization studies with a Na point-like source have indicated that the 25 μm photodetector provided better performance in terms of energy resolution (5.2% FWHM at 511 keV) and angular resolution (6.9 FWHM at 1275 keV), and more stability with temperature variations. In addition, MACACO III imaging capabilities have been assessed using a structure composed of thirty-seven Na point-like sources. Furthermore, in order to evaluate possible ways of improving the system performance, several studies have been carried out by means of simulations both in realistic and performance improved conditions. In this work, the system performance is evaluated for its future application in different areas.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study and comparison of different sensitivity models for a two-plane Compton camera

  • Muñoz, Enrique
  • Barrio, John
  • Bernabeu, Jose
  • Etxebeste, A.
  • Lacasta Llácer, Carlos
  • Llosá, Gabriela
  • Ros, A.
  • Roser, J.
  • Oliver, Francisco Javier
Given the strong variations in the sensitivity of Compton cameras for the detection of events originating from different points in the field of view (FoV), sensitivity correction is often necessary in Compton image reconstruction. Several approaches for the calculation of the sensitivity matrix have been proposed in the literature. While most of these models are easily implemented and can be useful in many cases, they usually assume high angular coverage over the scattered photon, which is not the case for our prototype. In this work, we have derived an analytical model that allows us to calculate a detailed sensitivity matrix, which has been compared to other sensitivity models in the literature. Specifically, the proposed model describes the probability of measuring a useful event in a two-plane Compton camera, including the most relevant physical processes involved. The model has been used to obtain an expression for the system and sensitivity matrices for iterative image reconstruction. These matrices have been validated taking Monte Carlo simulations as a reference. In order to study the impact of the sensitivity, images reconstructed with our sensitivity model and with other models have been compared. Images have been reconstructed from several simulated sources, including point-like sources and extended distributions of activity, and also from experimental data measured with Na sources. Results show that our sensitivity model is the best suited for our prototype. Although other models in the literature perform successfully in many scenarios, they are not applicable in all the geometrical configurations of interest for our system. In general, our model allows to effectively recover the intensity of point-like sources at different positions in the FoV and to reconstruct regions of homogeneous activity with minimal variance. Moreover, it can be employed for all Compton camera configurations, including those with low angular coverage over the scatterer.