Pasar al contenido principal

NANOCOMPUESTOS POLIMERICOS JERARQUICOS MULTIFUNCIONALES BASADOS EN GRAFENO: DESARROLLO, MORFOLOGIA Y PROPIEDADES EN ESTADO SOLIDO

MAT2013-47898-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of synchrotron infrared micro-reflectance for the study of diverse materials

  • González-Castillo, Eduin I.
  • Shuttleworth, Peter S.
  • Quiles-Díaz, Susana
  • Enrique-Jiménez, Patricia
  • Flores, Araceli
  • Ania, F.
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Yousef, Ibraheem
  • Kreuzer, Martin
  • Ellis, Gary James
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, EIGC acknowledges a PhD grant from the CONACYT (Mexico). SQD and PEJ acknowledge FPI Fellowships, and PSS a Ramón y Cajal PostDoc Fellowship, from the MINECO (Spain). MINECO also provided financial support through Grants MAT2014-54231-C4-4P, MAT2014-59674-JIN, MAT2013-47898-C2-1R and MAT2013-47898-C2-2R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of Multifunctional PEEK Nanocomposites based on Graphene

  • Quiles-Díaz, Susana
  • Enrique-Jiménez, Patricia
  • Flores, Araceli
  • Ania, F.
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
  • Martínez-Gómez, Aránzazu
ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018 . -- 7 pags., 2 figs., 1 tab., In this communication we present the preparation of multifunctional Polyether ether ketone (PEEK) nanocomposites with graphene. PEEK is an important high-perfomance semicrystalline thermoplastic matrix that displays a unique combination of toughness, stiffness, chemical and solvent resistance, retention of physical properties at high temperatures and recyclability. A relevant step forward to expand its field of application is the incorporation of electrical conductivity, developing multifunctional materials. Therefore, graphene has been incorporated into the matrix aiming to achieve electrical conductivity without a significant detriment on PEEK properties. The accomplishment of an effective transfer of the properties from graphene to the matrix is controlled by the nanofiller dispersion within the matrix and the presence of a strong polymer/graphene interface. One of the most efficient strategies to improve both parameters consists on the covalent modification of graphene with short polymer chains and their subsequent use as filler in the cognate polymer matrix1-3. Nevertheless, this approach is unachievable in our case since PEEK is insoluble in organic solvents. An alternative strategy, proven to be effective to increase carbon nanotubes dispersion within PEEK matrix4-5, consists on nanofiller wrapping in compatibilizing polymers. In this study we prepared PEEK/graphene nanocomposites using compatibilizers like polyetherimide (PEI), poly(1-4-phenylene ether-ether sulfone) (PEES), polysulfone (PSU) and sulfonated PEEK (SPEEK), which are amorphous thermoplastic polymers miscible with and structurally similar to PEEK. Composites incorporating compatibilizer/graphene nanofillers display a slight decrease on the thermal stability with respect to PEEK, which is related to the intrinsic thermal stability of the compatibilizer employed. Regarding the electrical conductivity, significant conductivity values were measured depending on both nanofiller concentration and the nature of the compatibilizer. A slight enhancement was observed on the mechanical properties of the nanocomposites for some of the non-covalent functionalized graphene. The morphology, thermal behavior and mechanical performance of all nanocomposites will be compared and the best strategy leading to a balance among electrical, thermal and mechanical properties will be shown., Financial support from MINEICO (Ministerio de Economía, Industria y Competitividad), Spain, for funding the research reported under grants MAT2013-47898-C2-1-R and MAT2013-47898-C2-2-R is gratefully acknowledged. SQD and PEJ also acknowledge the MINECO for a FPI Fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanoindentation of Graphene-Reinforced Polypropylene Nanocomposites Laminated with Carbon Fibres

  • Enrique-Jiménez, Patricia
  • Quiles-Díaz, Susana
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Ania, F.
  • Flores, Araceli
ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018 . -- 7 pags., 6 figs., The mechanical properties of graphene-reinforced polypropylene nanocomposites laminated with alternating carbon fibre mats have been studied at a local scale by nanoindentation and results are correlated with morphological studies by means of scanning electron microscopy (SEM). Mechanical maps (storage modulus and hardness) have been obtained using indentation depths of a few tens of nanometres. Analysis of the distribution of E´ values close to and far away from isolated carbon fibres offers a comprehensive understanding of the role of graphene on the mechanical properties of the transition region between the reinforced matrix and the microsized fibres., Financial support from MINECO (Ministerio de Economía y Competitividad), Spain, for funding the research reported under grants MAT2013-47898-C2-1-R, MAT2013-47898-C2-2-R is gratefully acknowledged. PEJ and SQ also acknowledge the MINECO for a FPI Fellowship. The authors wish to thank Mr. David Gómez of the Characterization Service of the Institute of Polymer Science & Technology, CSIC, for the SEM measurements.