Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic structure of nanometer scale magnetic antidot arrays

  • Kaidatzis, Andreas
  • Pérez del Real, Rafael
  • Béron, Fanny
  • Palma, Juan Luis
  • Álvaro Bruna, Raquel
  • Palmero, Ester M.
  • Velo, Murilo F.
  • Arzuza, Luis C. C.
  • Niarchos, Dimitrios
  • Vázquez Villalabeitia, Manuel
  • Pirota, K. R.
  • Escrig, Juan
  • García-Martín, José Miguel
Trabajo presentado en la conferencia Fuerzas y Túnel (FyT2016), celebrada en Girona del 5 al 7 de septiembre de 2016., Magnetic antidot arrays are groups of ordered holes patterned on a continuous magnetic film. They can be used as magnonic crystals with potential application in microwave devices [1], for magnetically-active plasmonics [2], and for biosensing applications [3]. We have followed two different routes to obtain magnetic antidots on Co, Permalloy (Py), and Co/Py films with different characteristics. Focused ion beam allowed obtaining hexagonal or square lattice antidot arrays with long-range order (hole diameter d=55nm, periodicity p=150-300nm) [4], whereas oblique deposition onto nanoporous alumina templates was used to obtain arrays with only hexagonal short-range order (d=40nm, p=105nm) [5]. The arrays were studied by magneto-optic Kerr effect, magnetic force microscopy (MFM) and micromagnetic simulations. It is shown how the coercivity increases with the density of antidots and the magnetic anisotropy axes strongly depend on the array symmetry. The MFM images show the magnetic structure of the arrays to be commensurate to their morphology, with domain walls (DW) pinned by the holes and in some cases super-DW separating linear domains (see Fig.)., Funding from CSIC (i-Link0783), MINECO (MAT2014-59772-C2-1), Comunidad de Madrid (Nanofrontmag), FAPESP (Brazil), Basal and Fondecyt (Chile) and EU (318144 and 272470)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic Properties of Fe3O4 antidots arrays synthesized by atomic layer deposition and focused ion beam lithography

  • Vega, Fidel
  • Palma, Juan Luis
  • Pereira, A.
  • Álvaro Bruna, Raquel
  • García-Martín, José Miguel
  • Escrig, Juan
Trabajo presentado en el XVII Brazilian MRS Meeting, celebrado en Natal (Brasil), del 16 al 20 de septiembre de 2018, Magnetic films of magnetite (Fe3O4) with controlled defects, usually called antidots arrays, where synthesized by a new technique called AFIR (Artificial Force Induced Reaction), that considers the deposition of a thin film by atomic layer deposition, the generation of holes using focused ion beam milling in the case of squared and hexagonal lattices, and the subsequent thermal reduction process of antidots arrays. Magnetic characterizations were carried out by magneto optic Kerr effect, showing the enhancement of the coercivity for the antidots arrays. The presence of the ordered non-magnetic holes induces a demagnetization field distribution that change the magnetization switching mechanism, and thermal reduction from Fe2O3 to Fe3O4 produces vacancies (porosity) in the material. Magnetic behavior was studied by mean of micromagnetic simulations, in where was possible to simulate the vacancies in the continuous film and the controlled defects. This technique opens a new route of manufacture ordered antidots arrays of magnetic oxides with variable lattice parameters., The authors acknowledge financial support from Fondequip (refs. EQM120045 and EQM140092), from Fondecyt (ref. 1150952 and 11150671), from DICYT, from the Spanish MINECO (ref. MAT2014-59772-C2-1-P) and from the Basal Proyect (ref. FB0807)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structural and magnetic properties of L10 FePt/{MgO, W, or Pt }/L10 FePt trilayers

  • Kaidatzis, Andreas
  • Giannopoulos, Georgios
  • Psycharis, V.
  • García-Martín, José Miguel
  • Varvaro, G.
  • Testa, A. M.
  • Niarchos, Dimitrios
Trabajo presentado en el XXXII Panhellenic Conference on Solid State Physics and Materials Science, celebrado en Ioannina (Grecia), del 18 al 21 de septiembre de 2016, Nowadays there is an urgent need for enhancing data storage capacity of hard disk drives due to the rapid increase of digital data volume produced worldwide. New effective approaches are required to push the recording areal density beyond the limit of 1 Tbit/in2 of state-of-art hard disk drives. A promising alternative is 3D-magnetic recording, where stacking magnetic layers with different magnetic properties are used [1]. In this work we report on the morpho-structural and magnetic properties of FePt/interlayer (MgO, Pt or W) /FePt magnetron sputtered trilayers, as a base structure towards 3D magnetic recording systems. The stack is grown on an MgO (100) substrate and consists of two magnetically hard FePt layers with a thickness of 20 and 10 nm separated by an interlayer of variable thickness (5 up to 50 nm). Fig 1a summarizes the coercivity for all MgO, W or Pt interlayer samples; the layers seem to be coupled even at 20 nm of MgO or W interlayer thickness. However, at 5 nm interlayer thickness, hysteresis loops for W or MgO interlayers are those of a film stack of partially coupled ferromagnetic layers( Figure 1b), whereas a fully decoupled magnetic trilayer is obtained for a Pt interlayer, in agreement to previous reports [2] and also supported by magnetic force microscopy imaging. Finally, electron diffraction patterns and dark field images analysis indicate that most of FePt grains grow in the L10 phase with the (001) planes parallel to the substrate and the MgO interlayer grows oriented as the substrate., Funding from the E.C. is acknowledged (Grant No. 318144 and 280670) & MINECO (MAT2014-59772-C2-1-P), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Environmentally-friendly coatings with antibacterial properties

  • García-Martín, José Miguel
Trabajo presentado en el TERMIS EU Meeting 2019, celebrado en Rodas (Grecia), del 27 al 31 de mayo de 2019, Orthopedic metal implants improve the quality of life of millions of patients each year. The main problem they present is infection, which depending on the type of device and the patient's health affects 0.5-5% of cases. Our approach to this problem is to use nanostructured coatings to reduce the risk of infection. In short, by magnetron sputtering at oblique incidence [1] we fabricate a coating formed by titanium nanocolumns that develop as the result of atomic shadowing processes in the ballistic deposition regime, see Figure. It is an energy efficient method that can be scaled-up to industry, since it takes place at room temperature in one single step and no chemicals are involved (thus without recycling problems)., Financial support from MINECO (MAT2014-59772-C2-1), MECD (PRX16/00383), Fundación Domingo Martínez and Fulbright Commission are appreciated.