Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Symmetry and magnitude of spin-orbit torques in ferromagnetic heterostructures

  • Garello, Kevin
  • Miron, Ioan Mihai
  • Onur Avci, Can
  • Gambardella, Pietro
arXiv:1301.3573.-- et al., Recent demonstrations of magnetization switching induced by in-plane current injection in heavy metal/ferromagnetic heterostructures have drawn increasing attention to spin torques based on orbital-to-spin momentum transfer. The symmetry, magnitude and origin of spin-orbit torques (SOTs), however, remain a matter of debate. Here we report on the three-dimensional vector measurement of SOTs in AlO x/Co/Pt and MgO/CoFeB/Ta trilayers using harmonic analysis of the anomalous and planar Hall effects. We provide a general scheme to measure the amplitude and direction of SOTs as a function of the magnetization direction. Based on space and time inversion symmetry arguments, we demonstrate that heavy metal/ferromagnetic layers allow for two different SOTs having odd and even behaviour with respect to magnetization reversal. Such torques include strongly anisotropic field-like and spin transfer-like components, which depend on the type of heavy metal layer and annealing treatment. These results call for SOT models that go beyond the spin Hall and Rashba effects investigated thus far., This work was supported by the European Research Council (StG 203239 NOMAD), the European Commission under the Seventh Framework Programme (GA 318144, SPOT), Ministerio de Economía y Competitividad (ERA-Net EUI2008-03884, MAT2010-15659), Agència de Gestió d'Ajuts Universitaris i de Recerca (2009 SGR 695) and the Agence Nationale de la Recherche (ANR-10-BLANC-1011-3 ‘SPINHALL’). F.F. and Y.M. acknowledge funding under the HGF-YIG programme VH-NG-513., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fieldlike and antidamping spin-orbit torques in as-grown and annealed Ta/CoFeB/MgO layers

  • Onur Avci, Can
  • Garello, Kevin
  • Nistor, Corneliu
  • Godey, Sylvie
  • Ballesteros, Belén
  • Mugarza, Aitor
  • Miron, Ioan Mihai
  • Gambardella, Pietro
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY).-- et al., We present a comprehensive study of the current-induced spin-orbit torques in perpendicularly magnetized Ta/CoFeB/MgO layers. The samples were annealed in steps up to 300 °C and characterized using x-ray-absorption spectroscopy, transmission electron microscopy, resistivity, and Hall effect measurements. By performing adiabatic harmonic Hall voltage measurements, we show that the transverse (fieldlike) and longitudinal (antidampinglike) spin-orbit torques are composed of constant and magnetization-dependent contributions, both of which vary strongly with annealing. Such variations correlate with changes of the saturation magnetization and magnetic anisotropy and are assigned to chemical and structural modifications of the layers. The relative variation of the constant and anisotropic torque terms as a function of annealing temperature is opposite for the fieldlike and antidamping torques. Measurements of the switching probability using sub-μs current pulses show that the critical current increases with the magnetic anisotropy of the layers, whereas the switching efficiency, measured as the ratio of magnetic anisotropy energy and pulse energy, decreases. The optimal annealing temperature to achieve maximum magnetic anisotropy, saturation magnetization, and switching efficiency is determined to be between 240 and 270°C., This work was supported by the the European Commission under the Seventh Framework Programme (GA 318144, SPOT), the European Research Council (StG 203239 NOMAD), the Ministerio de Economía y Competitividad (MAT2010-15659), and the Swiss Competence Centre for Materials Science and Technology (CCMX)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic structure of nanometer scale magnetic antidot arrays

  • Kaidatzis, Andreas
  • Pérez del Real, Rafael
  • Béron, Fanny
  • Palma, Juan Luis
  • Álvaro Bruna, Raquel
  • Palmero, Ester M.
  • Velo, Murilo F.
  • Arzuza, Luis C. C.
  • Niarchos, Dimitrios
  • Vázquez Villalabeitia, Manuel
  • Pirota, K. R.
  • Escrig, Juan
  • García-Martín, José Miguel
Trabajo presentado en la conferencia Fuerzas y Túnel (FyT2016), celebrada en Girona del 5 al 7 de septiembre de 2016., Magnetic antidot arrays are groups of ordered holes patterned on a continuous magnetic film. They can be used as magnonic crystals with potential application in microwave devices [1], for magnetically-active plasmonics [2], and for biosensing applications [3]. We have followed two different routes to obtain magnetic antidots on Co, Permalloy (Py), and Co/Py films with different characteristics. Focused ion beam allowed obtaining hexagonal or square lattice antidot arrays with long-range order (hole diameter d=55nm, periodicity p=150-300nm) [4], whereas oblique deposition onto nanoporous alumina templates was used to obtain arrays with only hexagonal short-range order (d=40nm, p=105nm) [5]. The arrays were studied by magneto-optic Kerr effect, magnetic force microscopy (MFM) and micromagnetic simulations. It is shown how the coercivity increases with the density of antidots and the magnetic anisotropy axes strongly depend on the array symmetry. The MFM images show the magnetic structure of the arrays to be commensurate to their morphology, with domain walls (DW) pinned by the holes and in some cases super-DW separating linear domains (see Fig.)., Funding from CSIC (i-Link0783), MINECO (MAT2014-59772-C2-1), Comunidad de Madrid (Nanofrontmag), FAPESP (Brazil), Basal and Fondecyt (Chile) and EU (318144 and 272470)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties engineering of nanopatterned cobalt antidot arrays

  • Kaidatzis, Andreas
  • Pérez del Real, Rafael
  • Álvaro Bruna, Raquel
  • Palma, Juan Luis
  • Anguita, José Virgilio
  • Niarchos, Dimitrios
  • Vázquez Villalabeitia, Manuel
  • Escrig, Juan
  • García-Martín, José Miguel
We report on the study of arrays of 60 nm wide cobalt antidots, nanopatterned using focused ion beam milling. Square and hexagonal symmetry arrays have been studied, with varying antidot densities and lattice constant from 150 up to 300 nm. We find a strong increase of the arrays' magnetic coercivity with respect to the unpatterned film, which is monotonic as the antidot density increases. Additionally, there is a strong influence of the array symmetry to the in-plane magnetic anisotropy: square arrays exhibit fourfold symmetry and hexagonal arrays exhibit sixfold symmetry. The above findings are corroborated by magnetic imaging and micromagnetic modeling, which show the magnetic structure of the arrays to depend strongly on the array morphology., AK received funding from the EC through a FP7 individual Marie Curie fellowship (Grant No. 272470). We also acknowledge funding from the EC through a FP7-ICT project (Grant No. 318144), from CSIC (ref. i-LINK0783), from Comunidad de Madrid (ref: Nanofrontmag), from DICYT, from Fondequip (ref. EQM140092), from Fondecyt (refs. 3130393 and 1150952), and from the Basal Project (ref. FB0807)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of magnetic coupling in FePt/spacer/FePt trilayers

  • Kaidatzis, Andreas
  • Giannopoulou, Eugenia G.
  • Varvaro, G.
  • Dimitrakopulos, G.
  • Psycharis, V.
  • García-Martín, José Miguel
  • Testa, A. M.
  • Barucca, Gianni
  • Karakostas, T.
  • Komninou, P.
  • Niarchos, Dimitrios
The effect of different spacer materials (MgO, W, and Pt) on the magnetic coupling in FePt/spacer/FePt trilayers has been carefully investigated. MgO results in magnetically coupled FePt layers with perpendicular magnetic anisotropy (PMA); W gives rise to a magnetically coupled system consisting of layers with PMA and in-plane magnetic anisotropy whereas Pt results in magnetically decoupled FePt layers with PMA. The trilayer microstructure is essential for explaining the obtained results. The growth mode of the top FePt layer is strongly affected by the underlying non-magnetic spacer, with occurrence of different morphologies; in particular, L10 FePt islands grow on MgO, a continuous FePt layer with fcc crystal structure is obtained on W, whereas a continuous layer with L10 structure is observed when the top layer is deposited on Pt., Funding from the EC (Grant No. 318144 and 686056) and from CSIC (ref. i-LINK0783) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Au and Ag sputter deposition on printer paper

  • Kaidatzis, Andreas
  • Psycharis, V.
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Niarchos, Dimitrios
We study metal-coated paper for low cost sensor applications. Sputter deposition is used to coat commercially available stationary printer paper with Au or Ag thin films. Two kinds of substrates are used: copy paper and glossy photo paper. The surface morphology, coating structure and electrical resistivity of the samples is studied. We find that after deposition of a nominally 100 nm thick metal layer the templates retain their initial morphology, which is fibre-like at the copy paper and flake-like at the photo paper. The metal-coated paper is conductive in both cases, with resistivity a few times higher than the bulk value. The photo paper samples have lower resistivity than the copy paper ones. Moreover, no observable resistivity variation is observed after 8 weeks of room temperature storage in a desiccator., Funding from the E.C. through a FP7-ICT project (Grant No. 318144) and MINECO (ref.: MAT2014-59772-C2-1-P) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanometer scale hard/soft bilayer magnetic antidots

  • Béron, Fanny
  • Kaidatzis, Andreas
  • Velo, Murilo F.
  • Arzuza, Luis C. C.
  • Palmero, Ester M.
  • Real, Rafael P. del
  • Niarchos, Dimitrios
  • Pirota, K. R.
  • García-Martín, José Miguel
The effect of arrays of nanometer scale pores on the magnetic properties of thin films has been analyzed. Particularly, we investigated the influence of the out-of-plane magnetization component created by the nanopores on the in-plane magnetic behavior of patterned hard/soft magnetic thin films in antidot morphology. Its influence on the coupling in Co/Py bilayers of few tens of nanometer thick is compared for disordered and ordered antidots of 35-nm diameter. The combination of magneto-optical Kerr effect (MOKE) and first-order reversal curve (FORC) technique allows probing the effects of the induced perpendicular magnetization component on the bilayer magnetic behavior, while magnetic force microscopy (MFM) is used to image it. We found that ordered antidots yield a stronger out-of-plane component than disordered ones, influencing in a similar manner the hard layer global in-plane magnetic behavior if with a thin or without soft layer. However, its influence changes with a thicker soft layer, which may be an indication of a weaker coupling, This work was financially supported by the i-Link project “Magnetic antidots,” funded by Consejo Superior de Investigaciones Científicas (CSIC, Spain) and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, Brazil). We also acknowledge additional funding from Spain, through MINECO (ref.: MAT2014-59772-C2-1-P), Comunidad de Madrid (ref: Nanofrontmag) and CSIC (ref.: 201460E014), from CAPES Brazilian funding agency, and from the E.C. through a FP7-ICT project (Grant No. 318144). The authors thank Raquel Álvaro (from IMM-CSIC) for the planarization of the initial templates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic anisotropy axis reorientation at ultrathin FePt films

  • Kaidatzis, Andreas
  • Psycharis, V.
  • Giannopoulos, Georgios
  • García-Martín, José Miguel
  • Niarchos, Dimitrios
Ultrathin FePt films (thickness between 1 nm and 5 nm) were studied for non‐volatile memories applications. The films were magnetron sputtered on monocrystalline MgO⟨001⟩ substrates at 500 °C. The films are polycrystalline, except the 1 nm thick film which is not continuous. It is shown that films with thickness higher than 2.7 nm have L10 structure and perpendicular magnetic anisotropy, while a transition to in‐plane anisotropy occurs for thinner films. The out‐of‐plane coercivity drops from 16 kOe at the thicker film to 0.5 kOe at the thinner one., Funding from the EC through a FP7‐ICT project (Grant No. 318144) and from CSIC (Ref. i‐LINK0783), is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structural and magnetic properties of L10 FePt/{MgO, W, or Pt }/L10 FePt trilayers

  • Kaidatzis, Andreas
  • Giannopoulos, Georgios
  • Psycharis, V.
  • García-Martín, José Miguel
  • Varvaro, G.
  • Testa, A. M.
  • Niarchos, Dimitrios
Trabajo presentado en el XXXII Panhellenic Conference on Solid State Physics and Materials Science, celebrado en Ioannina (Grecia), del 18 al 21 de septiembre de 2016, Nowadays there is an urgent need for enhancing data storage capacity of hard disk drives due to the rapid increase of digital data volume produced worldwide. New effective approaches are required to push the recording areal density beyond the limit of 1 Tbit/in2 of state-of-art hard disk drives. A promising alternative is 3D-magnetic recording, where stacking magnetic layers with different magnetic properties are used [1]. In this work we report on the morpho-structural and magnetic properties of FePt/interlayer (MgO, Pt or W) /FePt magnetron sputtered trilayers, as a base structure towards 3D magnetic recording systems. The stack is grown on an MgO (100) substrate and consists of two magnetically hard FePt layers with a thickness of 20 and 10 nm separated by an interlayer of variable thickness (5 up to 50 nm). Fig 1a summarizes the coercivity for all MgO, W or Pt interlayer samples; the layers seem to be coupled even at 20 nm of MgO or W interlayer thickness. However, at 5 nm interlayer thickness, hysteresis loops for W or MgO interlayers are those of a film stack of partially coupled ferromagnetic layers( Figure 1b), whereas a fully decoupled magnetic trilayer is obtained for a Pt interlayer, in agreement to previous reports [2] and also supported by magnetic force microscopy imaging. Finally, electron diffraction patterns and dark field images analysis indicate that most of FePt grains grow in the L10 phase with the (001) planes parallel to the substrate and the MgO interlayer grows oriented as the substrate., Funding from the E.C. is acknowledged (Grant No. 318144 and 280670) & MINECO (MAT2014-59772-C2-1-P), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the magnetic anisotropy of CoFeB/MgO stacks onto W with a Ta buffer layer

  • Kaidatzis, Andreas
  • Bran, Cristina
  • Psycharis, Vasilios
  • Vázquez Villalabeitia, Manuel
  • García-Martín, José Miguel
  • Niarchos, Dimitrios
The emergence of perpendicular magnetic anisotropy (PMA) in CoFeB/MgO stacks deposited on W using a Ta buffer layer is studied as a function of Ta and CoFeB layer thickness and annealing temperature. It is shown that very thin Ta “dusting” layers (thickness between 0.3 and 1 nm) enhance PMA of CoFeB layers grown on top of W. We find that Ta thickness is a crucial factor affecting magnetic anisotropy and it needs to be scaled proportionally to CoFeB thickness for obtaining PMA. Stacks without Ta have in-plane anisotropy, verifying the “PMA-enhancing” role of Ta. The maximum effective PMA energy (3.6×106 erg/cm3) is obtained for a stack with 1.4 nm of CoFeB and 1 nm of Ta and after annealing at 350 °C. Besides, PMA can be obtained even at the as-deposited state for certain thicknesses. This W-based CoFeB/MgO system could enable the development of low power consumption, high density, and non-volatile magnetic memories., Funding from the E.C. through a FP7-ICT project (Grant No. 318144) and CSIC (Ref. i-LINK0783) was acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of split CoFeB/Ta/CoFeB/MgO stacks for magnetic memories applications

  • Kaidatzis, Andreas
  • Gopman, Daniel B.
  • Bran, Cristina
  • García-Martín, José Miguel
  • Vázquez Villalabeitia, Manuel
  • Niarchos, Dimitrios
We report on the static and dynamic magnetic properties of W/CoFeB/Ta/CoFeB/MgO stacks, where the CoFeB layer is split in two by a 0.3 nm-thick Ta “dusting” layer. A total CoFeB thickness between 1.2 and 2.4 nm is studied. Perpendicular magnetic anisotropy is obtained for thickness below 1.8 nm even at the as-deposited stacks, and it is enhanced after annealing. Saturation magnetization is 1520 (1440) kA/m before (after) annealing, increased compared to non-split CoFeB layers. Ferromagnetic resonance measurements show that high magnetic anisotropy energy may be achieved (effective anisotropy field 0.571 ± 0.003 T), combined to a moderate Gilbert damping (0.030 ± 0.001). We argue that the above characteristics make the split-CoFeB system advantageous for spintronics applications., Funding from the EC (Grant No. 318144 and 686056), from the Spanish MINECO (ref. MAT2014-59772-C2-1-P) and from Comunidad de Madrid (Nanofrontmag, ref. P2013/MIT-2850), is acknowledged., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fieldlike and antidamping spin-orbit torques in as-grown and annealed Ta/CoFeB/MgO layers

  • Avci, Can Onur|||0000-0003-1226-2342
  • Garello, Kevin|||0000-0003-0236-322X
  • Nistor, Corneliu
  • Godey, Sylvie
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Barla, Alessandro|||0000-0002-5632-4915
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Pellegrin, Eric|||0000-0002-1648-0331
  • Ghosh, Abhijit
  • Miron, Ioan Mihai
  • Boulle, Olivier
  • Auffret, Stéphane
  • Gaudin, Gilles
  • Gambardella, Pietro|||0000-0003-0031-9217
We present a comprehensive study of the current-induced spin-orbit torques in perpendicularly magnetized Ta/CoFeB/MgO layers. The samples were annealed in steps up to 300 °C and characterized using x-ray-absorption spectroscopy, transmission electron microscopy, resistivity, and Hall effect measurements. By performing adiabatic harmonic Hall voltage measurements, we show that the transverse (fieldlike) and longitudinal (antidampinglike) spin-orbit torques are composed of constant and magnetization-dependent contributions, both of which vary strongly with annealing. Such variations correlate with changes of the saturation magnetization and magnetic anisotropy and are assigned to chemical and structural modifications of the layers. The relative variation of the constant and anisotropic torque terms as a function of annealing temperature is opposite for the fieldlike and antidamping torques. Measurements of the switching probability using sub-μs current pulses show that the critical current increases with the magnetic anisotropy of the layers, whereas the switching efficiency, measured as the ratio of magnetic anisotropy energy and pulse energy, decreases. The optimal annealing temperature to achieve maximum magnetic anisotropy, saturation magnetization, and switching efficiency is determined to be between 240 and 270°C.