Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of hexagonal Fe3Sn prepared by non-equilibrium techniques

  • Echevarria-Bonet, Cristina
  • Iglesias, Naroa
  • Saiz Garitaonandia, José Javier
  • Salazar Jaramillo, Daniel
  • Hadjipanayis, George C.
  • Barandiarán, José Manuel
We report a thorough structural and magnetic study of Fe3Sn produced either by solid state reaction or by mechanical alloying in order to figure out which of the two techniques is most suitable for obtaining the purest Fe3Sn alloy. Solid state reaction of Fe and Sn starting powders results in a pure sample (100%) of Fe3Sn. The extraordinary purity and crystallinity have been confirmed by in-lab XRD and Mössbauer spectroscopy. This study has been completed by magnetic measurements M(H) and M(T); a saturation magnetization of 122 A m2/kg and Curie temperature Tc = 475 °C, have been obtained., Authors acknowledge support from NOVAMAG project, under Grant Agreement No. 686056, EU Horizon 2020 Framework Pro-gramme for Research and Innovation (2014-2020)
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Structural and magnetic properties of Nd-Fe-Mo-(N) melt-spun ribbons with ThMn12 structure

  • Aubert, Alex
  • Madugundo, Rajasekhar
  • Saiz Garitaonandia, José Javier
  • Barandiarán García, José Manuel
  • Hadjipanayis, George C.
Figuras descargables en pdf en la página de la editorial, The influence of quenching rate and nitrogenation in melt-spun Nd1.2Fe10.6Mo1.4 has been investigated in terms of microstructure, phase formation and magnetic properties. Increasing the quenching rate leads to smaller grain size. However, it also implies a change in the crystallized phase structure. We obtained a pure ThMn12 (1:12) structure at quenching rates up to 30 m/s, leading to an average grain size of 220 nm. Magnetic measurements of the as-spun ribbons revealed a reduction of the saturation magneti zation for samples quenched above 30 m/s. This is attributed to the formation of a paramagnetic phase and/or magnetic phase with a Curie temperature (TC) close to room temperature which is confirmed by 57Fe Mössbauer spectroscopy. The analysis of the spectra rules out the presence of a ferromagnetic TbCu7 (1:7) phase, which is usually reported in such system. The ribbons were nitrogenated in order to form the harder magnetic phase Nd1.2Fe10.6Mo1.4Nx. The ribbon quenched at 30 m/s with the pure ThMn12 ni tride structure is the optimum sample for getting hard magnetic properties, with a coercivity of 0.6 T, saturation magnetization of 1.15 T and Curie temperature of 350 °C. Finally, we show the good stability of the later phase structure at elevated temperatures (≤ TC), making this compound a good candidate for permanent magnet applications., This work has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 686056 (NOVAMAG).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Role of Ce substitution in the magneto-crystalline anisotropy of tetragonal ZrFe10Si2

  • Salazar Jaramillo, Daniel
  • Martín Cid, Andrés
  • Saiz Garitaonandia, José Javier
  • Hansen, Tomas C.
  • Barandiarán García, José Manuel
  • Hadjipanayis, George C.
We report the study of Zr1-xCexFe10Si2 (x = 0.0, 0.3 and 0.6) compounds, with tetragonal ThMn12 structure, by means of neutron diffraction and Mössbauer spectroscopy to understand the role of Ce in the increasing magneto-crystalline anisotropy. Fitting of the 57Fe Mössbauer spectra to the three Fe atomic positions, namely 8i, 8j and 8f, indicate that Ce displaces Fe from the 8i to the 8j positions and in parallel increases the quadrupole splitting (QS) in position 8f, correlating with the increase of the magneto-crystalline anisotropy. However, the hyperfine field Bhf remains constant for all Ce substitutions. The full occupancy of the 8j positions by Fe at Ce = 0.6 can explain the instability of the ThMn12 structure for similar and higher Ce concentrations. Neutron diffraction experiments show the evolution of the magnetic moment and crystal structure as a function of temperature, showing Ce to cause an increase of the lattice parameters and tetragonal distortion. A large anomaly of the expansion coefficient, due to the spontaneous magnetostriction, is also disclosed. These results support a pure geometric influence of Ce on the magneto-crystalline anisotropy through a selective distortion of the lattice., Work has received funding from the DOE BES-DE-FG02-90ER45413 and European Union's Horizon 2020 research and innovation programme under grant agreement No 686056 (NOVAMAG).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of magnetic coupling in FePt/spacer/FePt trilayers

  • Kaidatzis, Andreas
  • Giannopoulou, Eugenia G.
  • Varvaro, G.
  • Dimitrakopulos, G.
  • Psycharis, V.
  • García-Martín, José Miguel
  • Testa, A. M.
  • Barucca, Gianni
  • Karakostas, T.
  • Komninou, P.
  • Niarchos, Dimitrios
The effect of different spacer materials (MgO, W, and Pt) on the magnetic coupling in FePt/spacer/FePt trilayers has been carefully investigated. MgO results in magnetically coupled FePt layers with perpendicular magnetic anisotropy (PMA); W gives rise to a magnetically coupled system consisting of layers with PMA and in-plane magnetic anisotropy whereas Pt results in magnetically decoupled FePt layers with PMA. The trilayer microstructure is essential for explaining the obtained results. The growth mode of the top FePt layer is strongly affected by the underlying non-magnetic spacer, with occurrence of different morphologies; in particular, L10 FePt islands grow on MgO, a continuous FePt layer with fcc crystal structure is obtained on W, whereas a continuous layer with L10 structure is observed when the top layer is deposited on Pt., Funding from the EC (Grant No. 318144 and 686056) and from CSIC (ref. i-LINK0783) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of split CoFeB/Ta/CoFeB/MgO stacks for magnetic memories applications

  • Kaidatzis, Andreas
  • Gopman, Daniel B.
  • Bran, Cristina
  • García-Martín, José Miguel
  • Vázquez Villalabeitia, Manuel
  • Niarchos, Dimitrios
We report on the static and dynamic magnetic properties of W/CoFeB/Ta/CoFeB/MgO stacks, where the CoFeB layer is split in two by a 0.3 nm-thick Ta “dusting” layer. A total CoFeB thickness between 1.2 and 2.4 nm is studied. Perpendicular magnetic anisotropy is obtained for thickness below 1.8 nm even at the as-deposited stacks, and it is enhanced after annealing. Saturation magnetization is 1520 (1440) kA/m before (after) annealing, increased compared to non-split CoFeB layers. Ferromagnetic resonance measurements show that high magnetic anisotropy energy may be achieved (effective anisotropy field 0.571 ± 0.003 T), combined to a moderate Gilbert damping (0.030 ± 0.001). We argue that the above characteristics make the split-CoFeB system advantageous for spintronics applications., Funding from the EC (Grant No. 318144 and 686056), from the Spanish MINECO (ref. MAT2014-59772-C2-1-P) and from Comunidad de Madrid (Nanofrontmag, ref. P2013/MIT-2850), is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetisation switching of FePt nanoparticle recording medium by femtosecond laser pulses

  • John, R.
  • Berritta, M.
  • Hinzke, D.
  • Müller, C.
  • Santos, T.
  • Ulrichs, H.
  • Nieves, Pablo
  • Walowski, J.
  • Mondal, R.
  • Chubykalo-Fesenko, O.
  • McCord, J.
  • Oppeneer, P. M.
  • Nowak, U.
  • Münzenberg, M.
Manipulation of magnetisation with ultrashort laser pulses is promising for information storage device applications. The dynamics of the magnetisation response depends on the energy transfer from the photons to the spins during the initial laser excitation. A material of special interest for magnetic storage are FePt nanoparticles, for which switching of the magnetisation with optical angular momentum was demonstrated recently. The mechanism remained unclear. Here we investigate experimentally and theoretically the all-optical switching of FePt nanoparticles. We show that the magnetisation switching is a stochastic process. We develop a complete multiscale model which allows us to optimize the number of laser shots needed to switch the magnetisation of high anisotropy FePt nanoparticles in our experiments. We conclude that only angular momentum induced optically by the inverse Faraday effect will provide switching with one single femtosecond laser pulse., This work was supported by the EC under Contract No. 281043, FemtoSpin. The work at Greifswald University was supported by the German research foundation (DFG), projects MU MU 1780/8-1, MU 1780/10-1. Research at Göttingen University was supported via SFB 1073, Projects A2 and B1. Research at Uppsala University was supported by the Swedish Research Council (VR), the Röntgen-Ångström Cluster, the Knut and Alice Wallenberg Foundation (Contract No. 2015.0060), and Swedish National Infrastructure for Computing (SNIC). Research at Kiel University was supported by the DFG, projects MC 9/9-2, MC 9/10-2. P.N. acknowledges support from EU Horizon 2020 Framework Programme for Research and Innovation (2014-2020) under Grant Agreement No. 686056, NOVAMAG. The work in Konstanz was supported via the Center for Applied Photonics.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Denitrogenation process in ThMn12 nitride by in situ neutron powder diffraction

  • Aubert, Alex
  • Puente-Orench, Inés
  • Porro, J. M.
  • Luca, Sorana
  • Garitaonandia, Joseba S.
  • Barandiarán, J.M.
  • Hadjipanayis, G. C.
ThMn12 nitrides are good candidates for high performance permanent magnets. However, one of the remaining challenges is to transfer the good properties of the powder into a useful bulk magnet. Thus, understanding the denitrogenation process of this phase is of key importance. In this study, we investigate the magnetic and structural stability of the (Nd0.75,Pr0.25)1.2Fe10.5Mo1.5Nx compound (x=0 and 0.85) as function of temperature by means of neutron powder diffraction. Thermal dependence of the lattice parameters, formation of α-(Fe,Mo), as well as the nitrogen content in the nitrides are investigated by heating the compounds up to 1010 K. The decomposition takes place mainly via the formation of the α-(Fe,Mo) phase, which starts at around 900 K, whereas the nitrogen remains stable in the lattice. Additionally, we show that the magnetic properties of the nitrides [M(4T)=90Am2/kg and Hc=0.55 T] are maintained after the thermal treatments up to 900 K. This study demonstrates that the ThMn12 nitrides with the Mo stabilizing element offer good prospects for a bulk magnet provided an adequate processing route is found., The authors acknowledge the project “SpINS: Spanish Initiatives on Neutron Scattering,” funded by the Spanish Ministry of Science and Innovation, and the CSIC for the neutron beam time granted on the “CRG-D1B.” Institut Laue-Langevin (ILL) is also acknowledged. We are also thankful for technical and human support provided by SGIker (UPV/EHU) and particularly the services of X-Ray Molecules and Materials (Dr. Aitor Larrañaga Varga) and Magnetic Measurements (Dr. Iñaki Orue). This work has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 686056 (NOVAMAG)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

A high-throughput exploration of magnetic materials by using structure predicting methods

  • Arapan, Sergiu
  • Nieves Cordones, Pablo
  • Cuesta López, Santiago
We study the capability of a structure predicting method based on genetic/evolutionary algorithm for a high-throughput exploration of magnetic materials. We use the USPEX and VASP codes to predict stable and generate low-energy meta-stable structures for a set of representative magnetic structures comprising intermetallic alloys, oxides, interstitial compounds, and systems containing rare-earths elements, and for both types of ferromagnetic and antiferromagnetic ordering. We have modified the interface between USPEX and VASP codes to improve the performance of structural optimization as well as to perform calculations in a high-throughput manner. We show that exploring the structure phase space with a structure predicting technique reveals large sets of low-energy metastable structures, which not only improve currently exiting databases, but also may provide understanding and solutions to stabilize and synthesize magnetic materials suitable for permanent magnet applications., EU H2020 Program Project NOVAMAG: Novel, critical materials free, high anisotropy phases for permanent magnets, by design (Project ID: 686056).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Magnetisation switching of FePt nanoparticle recording medium by femtosecond laser pulses

  • John, R. .
  • Berritta, M. .
  • Hinzke, D. .
  • Müller, C. .
  • Santos, T. .
  • Ulrichs, H. .
  • Nieves Cordones, Pablo
  • Walowski, J. .
  • Mondal, R. .
  • Chubykalo Fesenko, O.
  • McCord, J. .
  • Oppeneer, P. M. .
  • Nowak, U. .
  • Münzenberg, M. .
Manipulation of magnetisation with ultrashort laser pulses is promising for information storage device applications. The dynamics of the magnetisation response depends on the energy transfer from the photons to the spins during the initial laser excitation. A material of special interest for magnetic storage are FePt nanoparticles, for which switching of the magnetisation with optical angular momentum was demonstrated recently. The mechanism remained unclear. Here we investigate experimentally and theoretically the all-optical switching of FePt nanoparticles. We show that the magnetisation switching is a stochastic process. We develop a complete multiscale model which allows us to optimize the number of laser shots needed to switch the magnetisation of high anisotropy FePt nanoparticles in our experiments. We conclude that only angular momentum induced optically by the inverse Faraday effect will provide switching with one single femtosecond laser pulse., EC under Contract No. 281043, FemtoSpin. The work at Greifswald University was supported by the German research foundation (DFG), projects MU MU 1780/8-1, MU 1780/10-1. Research at Göttingen University was supported via SFB 1073, Projects A2 and B1. Research at Uppsala University was supported by the Swedish Research Council (VR), the Röntgen-Ångström Cluster, the Knut and Alice Wallenberg Foundation (Contract No. 2015.0060), and Swedish National Infrastructure for Computing (SNIC). Research at Kiel University was supported by the DFG, projects MC 9/9-2, MC 9/10-2. P.N. acknowledges support from EU Horizon 2020 Framework Programme for Research and Innovation (2014-2020) under Grant Agreement No. 686056, NOVAMAG. The work in Konstanz was supported via the Center for Applied Photonics.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Exploring the Crystal Structure Space of CoFe2P by Using Adaptive Genetic Algorithm Methods

  • Nieves Cordones, Pablo
  • Arapan, Sergiu
  • Cuesta López, Santiago
Advances in theoretical and computational condensed matter physics have opened the possibility to predict and design magnetic materials for specific technological applications. In this paper, we use the adaptive-genetic algorithm technique for exploring the low-energy crystal structure configurations of Co0.25Fe0.5P0.25, aiming to find new low-energy non-cubic phases with high saturation magnetization that might be interesting for high-performance permanent magnet development., This work was supported in part by the NOVAMAG project under Grant 686056, in part by the EU Horizon 2020 Framework Program for Research and Innovation (2014–2020), and in part by the Spanish Supercomputing Network and CESVIMA for providing computational resources under Grant QCM-2016-2-0034.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Applying high‐throughput computational techniques for discovering next‐generation of permanent magnets

  • Nieves Cordones, Pablo
  • Arapan, Sergiu
  • Hadjipanayis, G. C. .
  • Niarchos, D. .
  • Barandiaran, J.M.
  • Cuesta López, Santiago
The uncertainty in rare‐earth market resulted in worldwide efforts to develop rare‐earth‐lean/free permanent magnets. In this paper, we discuss about this problem and analyse how advances in computational and theoretical condensed matter physics could be essential in the development of a new generation of high‐performance permanent magnets via high‐throughput computational technique for material design. Additionally, we show that an adaptive genetic algorithm based methodology could be a useful tool for finding new magnetic phases. In particular, we apply such approach to Fe0.75Sn0.25 compound recovering well‐known experimental results and also finding new low‐energy magnetic metastable structures, NOVAMAG project, under Grant Agreement No. 686056, EU Horizon 2020 Framework Programme for Research and Innova-tion (2014-2020). Authors also acknowledge the Spanish Super-computing Network (RES) and CESVIMA for providing super-computational resources under Ref. QCM-2016-2-0034
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Toxicological evaluation of MnAl based permanent magnets using different in vitro models

  • Rumbo Lorenzo, Carlos
  • Cancho Espina, Cristina
  • Popov, Vladimir V.
  • Skokov, Konstantin
  • Tamayo Ramos, Juan Antonio
Due to economic, environmental and geopolitical issues, the development of permanent magnets with a composition free of rare earth elements and with acceptable magnetic properties has been considered a priority by the international community, being MnAl based alloys amongst the most promising candidates. The aim of this work was to evaluate the toxicity of powders of two forms of newly developed MnAl(C) permanent magnets through exposure experiments applying three model organisms, using as a benchmark powders of a commercial rare-earth-containing magnet (Nd2Fe14B). For this purpose, the direct exposure to the different particles suspensions as well as to magnets leachates was evaluated. Both viability and oxidative stress assays were applied in an adenocarcinomic human alveolar basal epithelial cell line (A549) and in the yeast Saccharomyces cerevisiae, together with the bioluminescent inhibition assay in the Gram negative bacterium Vibrio fischeri. The obtained results indicate that MnAl(C) permanent magnets, in general terms, presented similar toxicity than the Nd magnet for the selected biological models under the studied conditions. Overall, the presented data provide, for the first time, an in vitro toxicity analysis of MnAl based magnets., European Union’s Horizon 2020 NOVAMAG project (NMBP 23-2015, grant agreement N 686056) and from the Junta de Castilla y Leon and the European Social Fund-Youth European Initiative grant UBU-15-A.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Atomistic spin dynamics simulations of the MnAl τ-phase and its antiphase boundary

  • Nieves Cordones, Pablo
  • Arapan, Sergiu
  • Schrefl, T.
  • Cuesta López, Santiago
In this work we develop an atomistic spin dynamics model for the ideal Mn 50 Al 50 τ -phase by means of first-principles calculations. The model is applied to study the domain wall and antiphase boundary phenomenology. In particular, it allows us to obtain the dependence on the interfacial exchange coupling of the nucleation and depinning fields, as well as the macroscopic magnetization profile across the antiphase boundary. We find that microscopic antiferromagnetic exchange coupling stronger than 10 meV could unavoidably lead to the formation of a domain wall at the antiphase boundary., European Horizon 2020 Framework Programme for Research and Innovation (2014- 2020) under Grant Agreement No. 686056, NOVAMAG.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

An adaptive genetic algorithm approach for predicting magnet-ic structure suitable for high-performance permanent magnet development

  • Nieves Cordones, Pablo
  • Arapan, Sergiu
  • Cuesta López, Santiago
Trabajo presentado en: International Conference on Magnetics (INTERMAG), 2017, Summary form only given. In this work, we present a general overview, analysis and software implementation of a particular AGA, which has been proposed for discovering new RE-free magnetic crystal phases in the context of the EU-H2020 NOVAMAG project. The workflow diagram related to the Modelling Data Elements (MODA) of the magnetic crystal structure calculation based on AGA was shown. In particular, we make use of an AGA, implemented through USPEX and VASP codes, to predict new magnetic crystal phases, where those structures with better magnetic properties for a permanent magnet are selected and analyzed in more detail. Such a methodology has been preliminary compared to well-known experimentally reported properties compounds, showing an excellent agreement. In addition, we show recent results predicted by AGA in CoFe 2n X (n=1,2,3,4,5; where X=C, P, Hf, Zr, ...), where we found compounds with many metastable structures which fulfill the initial requirements (negative enthalpy of formation ΔHF<;0, high saturation magnetization μ 0 M S >1T and non-cubic lattice system) for permanent magnet development., NOVAMAG project, under Grant Agreement No. 686056, EU Horizon 2020 Framework Programme for Research and Innovation (2014-2020). Authors also acknowledge the Spanish Supercomputing Network (RES) and CESVIMA for providing supercomputational resources under Ref: QCM-2016-2-0034.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Database of novel magnetic materials for high-performance permanent magnet development

  • Nieves Cordones, Pablo
  • Arapan, Sergiu
  • Maudes Raedo, Jesús M.
  • Marticorena Sánchez, Raúl
  • Brío, N.L. del
  • Kovacs, A.
  • Echevarria Bonet, C.
  • Salazar, D.
  • Weischenberg, J.
  • Zhang, H.
  • Vekilova, O.Yu.
  • Serrano López, Roberto
  • Barandiaran, J.M.
  • Skokov, Konstantin
  • Gutfleisch, O.
  • Eriksson, O.
  • Herper, H.C.
  • Schrefl, T.
  • Cuesta López, Santiago
This paper describes the open Novamag database that has been developed for the design of novel Rare-Earth free/lean permanent magnets. Its main features as software technologies, friendly graphical user interface, advanced search mode, plotting tool and available data are explained in detail. Following the philosophy and standards of Materials Genome Initiative, it contains significant results of novel magnetic phases with high magnetocrystalline anisotropy obtained by three computational high-throughput screening approaches based on a crystal structure prediction method using an Adaptive Genetic Algorithm, tetragonally distortion of cubic phases and tuning known phases by doping. Additionally, it also includes theoretical and experimental data about fundamental magnetic material properties such as magnetic moments, magnetocrystalline anisotropy energy, exchange parameters, Curie temperature, domain wall width, exchange stiffness, coercivity and maximum energy product, that can be used in the study and design of new promising high-performance Rare-Earth free/lean permanent magnets. The results therein contained might provide some insights into the ongoing debate about the theoretical performance limits beyond Rare-Earth based magnets. Finally, some general strategies are discussed to design possible experimental routes for exploring most promising theoretical novel materials found in the database., European Horizon 2020 Framework Programme for Research and Innovation (2014-2020) under Grant Agreement No. 686056, NOVAMAG. European Regional Development Fund in the IT4Innovations national supercomputing center – path to exascale project, project number CZ 02.1.01/0.0/0.0/16–013/0001791 within the Operational Programme Research, Development and Education
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

In vitro safety evaluation of rare earth-lean alloys for permanent magnets manufacturing

  • Rumbo Lorenzo, Carlos
  • Cancho Espina, Cristina
  • Gassmann, Jürgen
  • Tosoni, Olivier
  • Barros García, Rocío
  • Martel Martín, Sonia
  • Tamayo Ramos, Juan Antonio
Due to their exceptional physico-chemical and magnetic characteristics, rare earth (RE) permanent magnets are applied in multiple critical technologies. However, several environmental and economic difficulties arising from obtaining RE elements have prompted the search of alternatives with acceptable magnetic properties but containing a lower percentage of these elements in their composition. The aim of this work was to perform a preliminary toxicological evaluation of three forms of newly developed RE-lean alloys (one NdFeTi and two NdFeSi alloys) applying different in vitro assays, using as a benchmark a commercial NdFeB alloy. Thus, the effects of the direct exposure to powder suspensions and to their derived leachates were analysed in two model organisms (the A549 human cell line and the yeast Saccharomyces cerevisiae) applying both viability and oxidative stress assays. Moreover, the impact of the alloy leachates on the bioluminescence of Vibrio fischeri was also investigated. The obtained data showed that only the direct interaction of the alloys particulates with the applied organisms resulted in harmful effects, having all the alloys a comparable toxicological potential to that presented by the reference material in the conditions tested. Altogether, this study provides new insights about the safety of NdFeTi and NdFeSi alloys., EU Horizon 2020 NOVAMAG project (NMBP 23-2015, Grant Agreement No. 686056) and from the Junta de Castilla y León and the European Social Fund-Youth European Initiative Grant UBU-15-A.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Denitrogenation process in ThMn12 nitride by in situ neutron powder diffraction

  • Aubert, A.
  • Puente-Orench, I.
  • Porro, J.M.
  • Luca, S.
  • Garitaonandia, J.S.
  • Barandiaran, J.M.
  • Hadjipanayis, G.C.
ThMn12 nitrides are good candidates for high performance permanent magnets. However, one of the remaining challenges is to transfer the good properties of the powder into a useful bulk magnet. Thus, understanding the denitrogenation process of this phase is of key importance. In this study, we investigate the magnetic and structural stability of the (Nd0.75, Pr0.25)1.2Fe10.5Mo1.5Nx compound (x=0 and 0.85) as function of temperature by means of neutron powder diffraction. Thermal dependence of the lattice parameters, formation of a-(Fe, Mo), as well as the nitrogen content in the nitrides are investigated by heating the compounds up to 1010 K. The decomposition takes place mainly via the formation of the a-(Fe, Mo) phase, which starts at around 900 K, whereas the nitrogen remains stable in the lattice. Additionally, we show that the magnetic properties of the nitrides [M(4T)=90 Am2/kg and Hc=0.55 T] are maintained after the thermal treatments up to 900 K. This study demonstrates that the ThMn12 nitrides with the Mo stabilizing element offer good prospects for a bulk magnet provided an adequate processing route is found.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Effects of Nd- and Zr- substitution for Sm on magnetic and structural properties in SmFe11V 1:12 compound

  • Schönhöbel, A.M.
  • Madugundo, R.
  • Echevarría Bonet, Cristina|||0000-0001-8323-9225
  • Amora, L.E.
  • Barandiarán, J.M.
  • Hadjipanayis, G.C.
Authors would like to acknowledge the financial support from Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación Francisco José de Caldas - Min-Ciencias, Government of Principality of Asturias (Spain) under project MAGNES SV-PA-21-AYUD/2021/51822 and Novamag project under EU Horizon 2020 Programme [grant number 686056].
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Tuning the magnetocrystalline anisotropy of Fe3Sn by alloying

  • Vekilova, Olga Yu
  • Fayyazi, Bahar
  • Skokov, Konstantin P
  • Gutfleisch, Oliver
  • Echevarría Bonet, Cristina|||0000-0001-8323-9225
  • Barandiarán, José Manuel
  • Kovacs, Alexander
  • Fischbacher, Johann
  • Schrefl, Thomas
  • Eriksson, Olle
  • Herper, Heike C
The electronic structure, magnetic properties, and phase formation of hexagonal ferromagnetic Fe3Sn-based alloys have been studied from first principles and by experiment. The pristine Fe3Sn compound is known to fulfill all the requirements for a good permanent magnet, except for the magnetocrystalline anisotropy energy (MAE). The latter is large, but planar, i.e., the easy magnetization axis is not along the hexagonal c direction, whereas a good permanent magnet requires the MAE to be uniaxial. Here we consider Fe3Sn0.75M0.25, where M= Si, P, Ga, Ge, As, Se, In, Sb, Te, Pb, and Bi, and show how different dopants affect the MAE and can alter it from planar to uniaxial. The stability of the doped Fe3Sn phases is elucidated theoretically via the calculations of their formation enthalpies. A micromagnetic model is developed to estimate the energy density product (BH)max and coercive field μ0Hc of a potential magnet made of Fe3Sn0.75Sb0.25, the most promising candidate from theoretical studies. The phase stability and magnetic properties of the Fe3Sn compound doped with Sb and Mn have been checked experimentally on the samples synthesised using the reactive crucible melting technique as well as by solid state reaction. The Fe3Sn-Sb compound is found to be stable when alloyed with Mn. It is shown that even small structural changes, such as a change of the c/a ratio or volume, that can be induced by, e.g., alloying with Mn, can influence anisotropy and reverse it from planar to uniaxial and back., Authors acknowledge support from NOVAMAG project, under Grant Agreement No. 686056, EU Horizon 2020 Framework Programme. The computations were performed on resources provided by the Swedish National Infrastructure for Computing (SNIC) at PDC and NSC centers. O.E. acknowledges support from STandUPP, eSSENCE, the Swedish Research Council and the KAW foundation (Grants No. 2012.0031 and No. 2013.0020). O.G. acknowledges the Hessen LOEWE Response Programme. Authors are thankful to Dr. Y. Kvashnin for useful discussions.