Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Identification of the system character through accumulated charge curve

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Ramón Zamora, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[EN] The corrosion rate in metals is usually studied by means of the application a potential signal with the purpose of leading the system to unbalance conditions, due to an electric current response is produced. This response is recorded and processed through the electric circuit analogy. Doing the fitting of the response to the properly model is getting the corrosion current. The application of voltammetric potential pattern to the analysis of corrosion, it is very useful, because does not produce polarization of the system. There fore, with this technique is possible to perform tests in sequence without the results being affected. Furthermore, through the integration over time of the electric current response, the accumulated electric charge curve is got which is very useful to the quickly identification of the system behaviour (faradic or non-faradic behaviour). In this paper, it is showed the capability of characterization a system through the accumulated electric charge; it allows identifying at a glance if the system has a faradic behaviour or a non-faradic behaviour. This will be very effective in the monitoring of the metal elements that are out of sight, such as: buried metal conduits or the reinforcement bars in the reinforcement concrete structures., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). To the Universitat Politècnica de València for the financial support in the project Ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surrogate Fuel Formulation to Improve the Dual-Mode Dual-Fuel Combustion Operation at Different Operating Conditions

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
[EN] Dual-mode dual-fuel combustion is a promising combustion concept to achieve the required emissions and CO2 reductions imposed by the next standards. Nonetheless, the fuel formulation requirements are stricter than for the single-fuel combustion concepts as the combustion concept relies on the reactivity of two different fuels. This work investigates the effect of the low reactivity fuel sensitivity (S=RON-MON) and the octane number at different operating conditions representative of the different combustion regimes found during the dual-mode dual-fuel operation. For this purpose, experimental tests were performed using a PRF 95 with three different sensitivities (S0, S5 and S10) at operating conditions of 25% load/950 rpm, 50%/1800 rpm and 100%/2200 rpm. Moreover, air sweeps varying ±10% around a reference air mass were performed at 25%/1800 rpm and 50%/1800 rpm. Conventional diesel fuel was used as high reactivity fuel in all the cases. Moreover, commercial 95 RON gasoline was used as reference to compare the different TRFs. The engine settings were managed to adjust the rate of heat release to that found with 95 RON gasoline. To do this, a quality index imposing a maximum deviation of 5% point-to-point between the HRR curves from both fuels was defined. The results suggest that PRF 95 with S0 has the most similar behavior compared to conventional 95 RON gasoline whatever the engine load. As the engine load increases, the sensitivity effect is more noticeable and iso-HRR operation was only possible for S0. At low and medium load, the TRFs present similar engine-out emissions with equal fuel consumption. At full load, the NOx emissions are increased with respect to the reference 95 RON gasoline without fuel consumption benefits. The results from the air variation for the different octane numbers demonstrated that the greatest differences are obtained for low air mass (i.e, higher EGR). In addition, the decrease of the octane number limits the maximum air increase due to the pressure gradients, requiring modifications in the engine settings that increase the soot formation., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18). The author R. Sari acknowledges the financial support from the Spanish ministry of science innovation and universities under the grant ¿Ayudas para contratos predoctorales para la formación de doctores¿ (PRE2018-085043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Load Generators for Automatic Simulation of Urban Fleets

  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] To ensure cities sustainability, we must deal with, among other challenges, traffic congestion, and its associated carbon emissions. We can approach such a problem from two perspectives: the transition to electric vehicles, which implies the need for charging station infrastructure, and the optimization of traffic flow. However, cities are complex systems, so it is helpful to test changes on them in controlled environments like the ones provided by simulators. In our work, we use SimFleet, an agent-based fleet simulator. Nevertheless, SimFleet does not provide tools for easily setting up big experiments, neither to simulate the realistic movement of its agents inside a city. Aiming to solve that, we enhanced SimFleet introducing two fully configurable generators that automatize the creation of experiments. First, the charging stations generator, which allocates a given amount of charging stations following a certain distribution, enabling to simulate how transports would charge and compare distributions. Second, the load generator, which populates the experiment with a given number of agents of a given type, introducing them dynamically in the simulation, and assigns them a movement that can be either random or based on real city data. The generators proved to be useful for comparing different distributions of charging stations as well as different agent behaviors over the same complex setup., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 project of the Spanish government. Pasqual Martí and Jaume Jordán are funded by UPV PAID-06-18 project. Jaume Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Does AI Qualify for the Job?: A Bidirectional Model Mapping Labour and AI Intensities

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
[EN] In this paper we present a setting for examining the relation between the distribution of research intensity in AI research and the relevance for a range of work tasks (and occupations) in current and simulated scenarios. We perform a mapping between labour and AI using a set of cognitive abilities as an intermediate layer. This setting favours a two-way interpretation to analyse (1) what impact current or simulated AI research activity has or would have on labour-related tasks and occupations, and (2) what areas of AI research activity would be responsible for a desired or undesired effect on specific labour tasks and occupations. Concretely, in our analysis we map 59 generic labour-related tasks from several worker surveys and databases to 14 cognitive abilities from the cognitive science literature, and these to a comprehensive list of 328 AI benchmarks used to evaluate progress in AI techniques. We provide this model and its implementation as a tool for simulations. We also show the effectiveness of our setting with some illustrative examples., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigación avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Hydronium Detection in Hardened Concrete

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Gasch, Isabel|||0000-0001-7036-4481
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The monitoring of reinforced concrete structures allows us to detect the presence of aggressive agents into of the concrete matrix, on site and in a real time. These aggressive agents can produce the unexpected failure of the structures, thus discovering their presence is a fundamental aspect in the preservation of people safety and the durability of the structure. On the other hand, helps to reduce the cost of maintenance and repair operations, due to allow us to identify the problems faster, minimizing the intervention to be done. The present research paper was focused in the hydronium detection; the reduction of this species generates hydrogen, the hydrogen produces the embrittlement and cracking of the steel, which seriously compromises the right behaviour of the structure. The problem of hydrogen appears in industries such as ammonia processing or petrochemistry industries and nuclear power plants. All of them are industries in which a failure seriously compromises the welfare of people and the environment. Therefore, the detection of hydrogen penetration in reinforcement concrete structures in these cases are very interesting. In this study, with the purpose to detect the hydronium or hydrogen in the hardened concrete matrices is proposed the use of voltammetric sensor, which is part of a multisensory system called Electronic-Tongue. This is a preliminary study. The objective of these initial steps was to evaluate the detection capability of the sensor. Currently, have been designing a sequential test in order to evaluate the sensor in different partial hydrogen pressures with the purpose to develop mathematical models to the hydronium or hydrogen detection and quantification in hardened concrete matrix., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). Also, to the Universitat Politècnica de València for the financial support in the project ¿Ayudas a Primeros Proyectos de Investigación (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-touch-based assessment of hand mobility, dexterity and function. Preliminary study of validity, reliability and sensitivity to upper limb impairment severity in individuals with stroke.

  • Latorre, Jorge
  • Mollà-Casanova, Sara
  • Salinas, Bárbara
  • Colomer, Carolina
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Impairments of the upper limb function are among the most common and disabling sequelae after stroke, and their rehabilitation poses a major challenge for current physical and occupational therapy interventions. While restoration of certain degree of proximal and global movements and function is expected, the recovery of premorbid hand mobility and dexterity is less likely to occur. Although great efforts are usually made to rehabilitate these skills, with customized particular and analytic exercises, their assessment is rarely made with the same level of specificity. In general, hand and finger mobility and functionality are indirectly assessed in the clinic with standardized clinical scales and tests that require the use of these skills to perform some tasks. Although these scales are easy to administer, they can present poor accuracy, be biased, and do not allow for isolated assessment of joints and movements. Multi-touch technology enables interaction with electronic devices, such as smartphones and tablets, with on-screen finger touches. Although there is a very limited number of studies that investigate the potential of this technology to rehabilitate hand mobility and dexterity, the use of this technology for assessment of these skills remains unexplored. This study evaluates the feasibility of a multi-touch-based assessment tool (app) of hand mobility and dexterity in a sample of post-stroke survivors. Our results provide preliminary evidence that this technology can be used to design valid and reliable instruments for assessing hand mobility and dexterity that, in addition, are sensitive to the severity of the motor impairment of the upper limb after stroke, which could complement conventional clinical assessment., This study was partially funded by project VALORA, Fundació la Marató de la TV3 (grant 201701-10), grant BES-2014-068218 of the Ministerio de Economía y Competitividad of Spain, and grant Ayuda a Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

New matrix series expansions for the matrix cosine approximation

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Peinado Pinilla, Jesús|||0000-0002-9048-5106
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
This work has been partially supported by Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia (PAID-06-18) grants SP20180016.