Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chemical looping combustion of biomass with CO2 capture: experimental results at the 20 kWth scale

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Condori, Óscar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
5 figures, 2 tables.-- Work presented at the 2nd International Conference on Negative CO2 Emissions, June 14-17, 2022, Göteborg, Sweden., Chemical Looping Combustion (CLC) technology is an interesting option to produce bioenergy with CO2 Capture and Storage (BECCS) at low economic and energetic costs. The benefits of CLC are based on avoiding the costly separation steps by using an oxygen carrier, usually a metal oxide, to transfer oxygen from air to fuel avoiding the contact between them. Thus, CO2 capture is inherent to the CLC process. In this work, the combustion of a biomass residue –olive stone, with high availability in Spain– is performed in a CLC unit at the 20 kWth scale using a highly reactive iron ore as oxygen carrier. Oxygen transference for the combustion is achieved by continuously circulating the oxygen carrier between two interconnected fluidized bed reactors: the fuel and air reactors. Biomass is fed at the bottom of the fuel reactor to maximize the contact between the volatile matter and the oxygen carrier particles. The oxygen carrier was regenerated in the air reactor by air. In addition, a carbon stripper was also implemented as a key element in order to increase CO2 capture efficiency by recovering char particles escaping the fuel reactor. A total of 100 h of continuous hot fluidization were carried out, 40 of them corresponded to biomass combustion. The tests were designed to rationally analyse the effect on the combustion efficiency and the CO2 capture of the main operating conditions: oxygen carrier to fuel ratio (=1-3), temperature of the fuel reactor (850-970 ºC), and specific solids inventory (160-500 kg/MWth). CO2 capture efficiency increases with the fuel reactor temperature because the increase in the char gasification rate. In addition, it also increases up to 98 % by increasing the solids inventory or decreasing the solids circulation, i.e. varying the mean residence time of solids in the fuel reactor. Full combustion was not achieved due to the high volatile content of the biomass and the uncompleted oxidation of char gasification products. Oxygen demand values in the range of 3-20 % were obtained, being the behaviour of gasification products (H2+CO) different to hydrocarbons from volatile matter (e.g. CH4). The presence of unburnt H2 and CO was mainly affected by the char conversion; but the increase in the solids circulation rate also has a remarkable effect on the decrease of unconverted hydrocarbons., This work was performed in the UPCLOU, supported by the Grant PDC2021-121190-I00 funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chemical looping combustion of biomass with CO2 capture: operational experience at CSIC

  • Abad Secades, Alberto
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Mendiara, Teresa
  • Adánez-Rubio, Iñaki
  • Adánez Elorza, Juan
Abstract of the oral presentation given at 6th International Conference on Chemical Looping, September 19-22, 2022, Instituto de Carboquímica (ICB-CSIC), Zaragoza, Spain., Bioenergy and CO2 Capture and Storage (BECCS) has been identified as a relevant measure to achieve the target enforced by the United Nations Framework Convention on Climate Change (UNFCCC) in the Paris Agreement: to limit the increase in the average world temperature to 2 ºC above pre-industrial levels. In this sense, the use of biomass in Chemical Looping Combustion (CLC) has the potential to produce energy with inherent CO2 capture at low economic and energetic costs cost. Some specific challenges must be addressed when using biomass in CLC, namely the difficulty to achieve complete combustion of biomass due to its high volatile content or the effect of ash particles on the oxygen carrier properties and durability. In this work, an overview of the operational experience burning biomass in two CLC units at ICB-CSIC (Spain) –1 kWth and 50 kWth– are compiled. Results obtained burning different biomasses are critically compared and discussed in order to identify possible issues for the scale-up of biomass-fuelled chemical looping combustion. A wide variety of oxygen carriers have been tested, which are differentiated by: (1) natural ores –ilmenite, hematite ore, Mn-ore; (2) regular synthetic oxygen carriers –Cu/Al; and (3) materials with oxygen uncoupling capability for CLOU –Cu, CuMn and FeMn materials. A total of 300 h of continuous biomass combustion have been accumulated. The effect of the operating conditions and the used oxygen carrier on the performance of CLC and CLOU with biomass was evaluated. In each case, tests were designed to rationally analyse the effect of the oxygen carrier to fuel ratio, the temperature of the fuel reactor, gasifying agent (H2O or CO2), and specific solids inventory on the combustion efficiency and the CO2 capture. The relevance of the CLC unit design on the combustion behaviour is discussed by comparing results from the two facilities. In both units, biomass is fed at the bottom of the fuel reactor to maximize the contact between the volatile matter and the oxygen carrier particles and they are based on two interconnecting fluidized beds reactors. However, they are characterized by different fluidization regime and solids inventory per thermal power. A carbon stripper was also implemented in the 50 kWth CLC unit as a key element in order to increase CO2 capture efficiency by recovering char particles escaping the fuel reactor. In general, high CO2 capture efficiencies were obtained during the combustion tests, with usual values above 95%, and reaching even 99.9% in some specific conditions. However, the high volatile content of the biomass leads to incomplete combustion when natural ores were used. High combustion efficiency, or even complete combustion, was achieved when highly reactive synthetic materials were used, including both CLC and CLOU operation. Also, the existence of tar and pollutants compounds, such as NOx, are evaluated and discussed. Insights were obtained in order to achieve high CO2 capture and combustion efficiency values. These results demonstrate the promising possibilities of biomass fuelled CLC as a BECCS technology., This work was supported by the UPCLOU project, Grant PDC2021-121190-I00 funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Techno-economic analysis of chemical looping processes with biomass resources for energy production and CO2 utilization

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Domingos, Yldeney
  • Mendiara, Teresa
4 figures, 7 tables.-- Work presented at 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, held on 30th June - 4th July, 2024, in Rhodes (Greece)., Bioenergy coupled with carbon capture utilization and storage (BECCUS) is an attractive greenhouse gas mitigation technology that can produce negative CO2 emissions by combining bioenergy resources with the utilization or geological storage of the captured CO2. The main objective of this work was to evaluate the technical and economic feasibility of two BECCUS technologies based on chemical looping concept with two biomass waste as fuels, i.e., swine manure and pine sawdust, for the production of thermal energy and a pure CO2 stream that is subsequently used as raw material in agricultural greenhouses. Direct use of solid biomass resources was considered for the Chemical Looping with Oxygen Uncoupling (CLOU) option, whereas biogas production was the starting point for Chemical Looping Combustion (CLC). The profitability of the chemical looping scenarios was assessed through the Levelized Cost of CO2 (LCOCO2). This parameter was estimated at 218.31 €/t CO2 for the CLC scenario, a value much higher than those for the CLOU scenarios (73.04 - 87.32 €/t CO2) due to the limited conversion degree of the carbon present in the fuel waste to biogas and the need for an additional experimental plant to the CLC unit, i.e., the biogas production plant. Comparing the CLOU scenarios, the economic analysis revealed that the profitability of the biomass-fueled chemical looping facility was markedly sensitive to the selling price of the biomass resource. Furthermore, the values of the LCOCO2 parameter for the CLOU scenarios were lower than those estimated in other research studies that implemented BECCUS technologies and utilized the captured CO2 for identical purposes. Therefore, it can be concluded that CLOU processes fed with biomass are a very attractive BECCUS technology for heat generation where, in addition, the pure CO2 stream obtained at the outlet of the fuel reactor can be considered a marketable, high value-added product., This work was supported by the UPCLOU project (Grant PDC2021-121190-I00 funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/PRTR) and the CO2SPLIT project (Grant PID2020-113131RB-I00/ AEI/10.13039/501100011033). A. Cabello is also grateful for Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment of power-to-methane systems with CO2 supplied by the chemical looping combustion of biomass

  • Navajas, A.
  • Mendiara, Teresa
  • Gandía, L. M.
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
6 figures, 2 tables.-- Work presented at the 6th International Conference on Chemical Looping, 19-22 September 2022, Zaragoza, Spain., Power-to-methane (PtM) systems may allow mitigating the fluctuations in renewable energy supply by storing the energy in the form of methane. In these systems, hydrogen produced by electrolysis is combined with carbon dioxide from different sources to produce methane through Sabatier reaction. The present work analyzes PtM systems based on CO2 supply from Chemical Looping Combustion (CLC) units running on biomass (PtM-bioCLC). Life-cycle-assessment of PtM- bioCLC systems was done to evaluate their environmental impact respect a specific reference case. It was concluded that the configurations proposed have the potential to decrease the value of the climate change indicator, the global warming potential (GWP), to the lowest values reported to date in literature. Moreover, the possibility to effectively remove CO2 from the atmosphere realizing the concept of CO2 negative emissions was also demonstrated. Besides GWP, up to 16 LCA indicators were also evaluated and their values for the PtM-bioCLC systems analyzed were similar to those found in the reference case or even significantly lower in some of the categories such as resource use/depletion (RUE), ozone depletion (POF), human health (RI), acidification (AC) and eutrophication (EUT and EUM). Results obtained highlight the potential of these newly proposed PtM schemes., This work was supported by Grant PDC2021-121190-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and also by Grant PID2020-113131RB-I00 funded by MICIN/AEI/10.13039/501100011033. A.N. and L.M.G. gratefully acknowledge Grant RTI2018-096294-B-C31 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Peer reviewed