Pasar al contenido principal

DISEÑO DE SISTEMAS DE ALMACENAMIENTO OPTIMOS BASADOS EN BATERIAS LI-ION NUEVAS Y DE SEGUNDA VIDA PARA INTEGRACION DE ENERGIAS RENOVABLES

PID2019-111262RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Dynamic modeling of a pressurized alkaline water electrolyzer: a multiphysics approach

  • Iribarren Zabalegui, Álvaro
  • Elizondo Martínez, David
  • Barrios Rípodas, Ernesto
  • Ibaiondo, Harkaitz
  • Sánchez Ruiz, Alain
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
In this paper a dynamic model for the simulation of pressurized alkaline water electrolyzers is presented. The model has been developed following a multiphysics approach, integrating electrochemical, thermodynamic, heat transfer and gas evolution processes in order to faithfully reproduce the complete dynamical behavior of these systems. The model has been implemented on MATLAB/Simulink and validated through experimental data from a 1 Nm3/h commercial alkaline water electrolyzer. Validations have been performed under real scenarios where the electrolyzer is working with power profiles characteristic from renewable sources, wind and photovoltaic. The simulated results have been found to be consistent with the real measured values. This model has a great potential to predict the behavior of alkaline water electrolyzers coupled with renewable energy sources, making it a very useful tool for designing efficient green hydrogen production systems., This work has been supported by the Spanish State Research Agency (MCIN/AEI/10.13039/501100011033) under grants PID2019-111262RBI00, PID2019-110956RB-I00 and TED2021-132457B-I00 (also funded by the European Union NextGenerationEU/PRTR), by Ingeteam R&D Europe and by Ingeteam Power Technology.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Applied method to model the thermal runaway of lithium-ion batteries

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The thermal runaway (TR) is one of the most dangerous phenomena related to lithium-ion batteries. For this reason, there are different proposals in the literature for its modelling. Most of these proposed models take into account the decomposition reactions between the internal components of the cell, and base the adjustment of the parameters on numerous abuse tests that lead to the appearance of TR. However, these tests are destructive, require specific equipment, present a high economic cost and are very time consuming. This paper proposes a modelling method which enables the development of TR models with the use of fewer resources. This method is based on chemical kinetics, which allow a simplification of the general modelling process published in the literature. At the same time it maintains good accuracy and makes it possible to define the TR behavior of any type of cell, regardless of its chemistry, shape or size. Furthermore, the proposed method allows the use of the experimental results most commonly presented in the specialized literature, which significantly reduces the need for destructive testing. The presented modelling method achieves a good compromise between accuracy and applicability in the validations shown in the paper., This work has been supported by the Spanish State Research Agency (AEI) under grant PID2019-111262RB-I00 /AEI/ 10.13039/501100011033, the European Union under the H2020 project STARDUST (774094), and the Public University of Navarra under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Onset of irreversible reactions in overcharging lithium-ion cells: an experimental and modeling approach

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Lalinde Sainz, Iñaki
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are energy storage systems used in an increasing number of applications. Due to their flammable materials, their use entails risks of fire and explosion. The study of the abuse operation of these batteries before reaching the thermal runaway is a relevant research topic to prevent safety issues. There are various studies in the bibliography providing exhaustive thermal studies of the safe operating area, as well as concerning the thermal runaway. However, the onset irreversible reactions, that take place at a SOC around 110%, have not been properly analyzed. We present in this contribution an experimental study of this onset reaction measured in pouch Li-ion cells under various conditions of charge current and temperature. We also propose a lumped-parameter thermal model for the cell, which allows a detailed characterization of this exothermic reaction. The results achieved in this contributions can be a key tool to prevent overcharge accidents that may arise due to malfunctioning of the battery charger or battery management system., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European Union's Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022- 000039), funded by Government of Navarre, and has also been supported by MCIN/AEI/10.13039/501100011033/ and by European Social Fund under a PhD scholarship (grant PRE2020-095314).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

New design alternatives for a hybrid photovoltaic and doubly-fed induction wind plant to augment grid penetration of renewable energy

  • Goñi Pérez, Naiara
  • Sacristán Sillero, Javier
  • Berrueta Irigoyen, Alberto
  • Rodríguez Rabadan, José Luis
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
Reducing carbon emissions is essential to stop climate change. The grid-share of renewable generation plants is increasing, being wind and photovoltaic plants the most common ones, whereas conventional plants are the only ones that provide the necessary services to maintain the grid stability and keep the generation-demand balance. However, with the aim of achieving carbon-neutral generation, conventional plants are being dismantled. This leads to the imminent need of providing these services with renewable plants. Due to this challenge, this proposal analyses a hybrid plant composed by wind and photovoltaic generation with two types of storage, lithium-ion batteries and a thermal storage system based on volcanic stones. In order to compare both strategies, a technoeconomic methodology is explained that allows to optimally size the plant, using the current prices of each technology. The most cost-competitive proposal turns to be the hybrid plant with thermal storage, composed by 623.9 MW installed power and 21.9 GWh of storage, which could replace a 100 MW, 24/7 conventional power plant, with an LCOHS (levelized cost of hybrid system) of 118.38 €/MWh, providing identical grid services and an equivalent inertia in a way committed with the environment. This is in turn a zero-carbon emissions solution perfectly matched to a second life plan for a conventional power plant., This work has been supported by Siemens Gamesa Renewable Energy, by the Spanish State Research Agency (AEI/ 10.13039/501100011033) under grants PID2019-111262RB-I00 and PID2019-110956RB-I00, and by the Public University of Navarra under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Outdoor performance of a CdTe based PV generator during 5 years of operation

  • Guerra Menjívar, Moisés Roberto
  • Parra Laita, Íñigo de la
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
Together with the huge growth of the traditional crystalline silicon (Si-x) PV manufacturers, other thin-film solar cells have also emerged such as cadmium telluride (CdTe) manufacturers. They are characterized by the fact that they were created to reduce costs and by the scarcity of silicon, from which the rest of the modules are made. Despite they need more space to generate the same amount of energy as crystalline modules, their price is supposed to be much lower, and argue that they have a better performance at high temperatures. However, real comparisons between the outdoor performance of CdTe and Si-x modules have been scarcely addressed in the literature. This paper provides a comparison under real operating conditions of a CdTe photovoltaic generator versus a conventional silicon generator during 5 years of operation in a mid-latitude area, identifying the causes of the differences observed., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RBI00/AEI/10.13039/501100011033 and PID2019-110816RB-C21-I00/AEI/10.13039/501100011033
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Temperature indicators and overtemperature detection in lithium-ion batteries based on electrochemical impedance spectroscopy

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are the leading technology for energy storage systems due to their attractive advantages. However, the safety of lithium-ion batteries is a major concern, as their operating conditions are limited in terms of temperature, voltage and state of charge. Therefore, it is important to monitor the conditions of lithium-ion batteries to guarantee safe operation. To this end, in the present work, we analyze electrochemical impedance spectroscopy (EIS) as a tool to estimate the temperature of batteries. Overtemperature abuse tests from 25 °C to 140 °C are performed at various states of charge, and EIS measurements are obtained during the tests. The influence of temperature on cell impedance at different frequencies is analyzed and new findings are revealed. The real part of the impedance is identified to be the best indicator for cell temperature estimation by EIS. In addition, the best frequency to achieve accurate temperature monitoring, avoiding disturbances produced by state of charge variations, is proposed based on experimental results. Finally, EIS is proven to be a reliable technique for overtemperature and thermal runaway detection., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European Union’s Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022- 000039), funded by Government of Navarre, and has also been supported by MCIN/AEI/10.13039/501100011033/ and by European Social Fund under a PhD scholarship (grant PRE2020-095314).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Integrated lithium-ion battery model and experimental validation of a second-life prototype

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
A battery model predicts the battery performance, which can be a useful tool for optimizing battery design and preventing unsafe operation. This becomes especially significant in second-life batteries where the cells have already endured degradation and predicting the lifetime becomes challenging. The assessment of physical phenomena is often performed individually, but the overall battery behavior depends on their interaction. For this purpose, an integrated battery model is developed. Equivalent electric circuits are interconnected to represent the electrochemical reactions, thermodynamic phenomena, and heat transfer mechanisms of the battery. To consider cell degradation, calendar and cycling aging were represented using a semi-empirical model. A battery management system is included to oversee and remain within the safe limits of battery voltage, temperature, and current. Additionally, a passive cell balancing distributes charge evenly. The integrated model is applied to a second-life battery prototype with a nominal capacity and power of 45 Ah and 4 kW, respectively. Its performance is validated with constant current and power cycles, as well as in a microgrid with photovoltaic generation under a self-consumption profile. The model accurately reproduces experimental results of battery power, voltage, temperature, and state of charge., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European HYBPLANT (0011-1411-2022-000039), funded by Government of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analysis and modelling of calendar ageing in second-life lithium-ion batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The reuse of Li-ion batteries from electric vehicles is a promising alternative to recycling nowadays. However, the technical and economic viability of these second-life (SL) batteries is not yet clear. Degradation assessment plays a key role not only to analyse the impact of ageing factors in reused batteries, but also to quantify their durability. In this context, this contribution aims to analyse calendar ageing behaviour in SL cells. 16 reused Nissan Leaf modules are aged during 750 days under three temperatures and four State of Charge (SOC), covering a State of Health range from 72.2 % to 13 %. The impact of temperature and SOC as stress factors is firstly analysed, concluding that their increase accelerates ageing. Temperature rise is found to have a major impact, accelerating up to 27 times capacity fade and almost 6 times resistance increase when compared to light ageing conditions, while increasing SOC nearly doubles ageing rates. The worst ageing case is found to be the combination of 60 ◦C and 66 % of SOC. Regarding degradation trends, they are proven to be constant during all SL lifetime. This work also proposes and validates a calendar ageing model for SL cells. Accuracy of validation results show a fitting Rsq of 0.9941 in capacity fade and 0.9557 in resistance increase, thereby tracking the heterogeneous degradation of the SL cells under calendar ageing., We would like to acknowledge the support of the Spanish State Research Agency (AEI) grant PID2019-111262RB-I00/AEI/10.13039/501100011033, the European Union H2020 Project STARDUST (74094) and the Government of Navarre Ph.D. scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Integration of second-life batteries in residential microgrids and fast charging stations

  • San Martín Biurrun, Idoia
  • Braco Sola, Elisa
  • Martín Castilla, Álvaro
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The potential of batteries from electric vehicles to be given a second life in stationary applications could be starting to become a reality in few years. However, the technical and economic feasibility of such second-life batteries (SLBs) is still uncertain. In this context, this paper analyses the real operation of a SLB in three scenarios: two of residential microgrids with photovoltaic generation under different strategies, and a fast charging station for electric mobility. To this end, three energy management strategies are developed, the first of which seeks to maximise the self-consumption of a typical household with photovoltaic generation; the second, in addition to maximising self-consumption, presents a night-time charge and peak shaving of the contract power from the grid; and the last refers to an urban bus charging station in which the aim is to reduce the contract power from the grid. Experimental validation of SLB during more than three weeks of operation in each of the scenarios have proved the technical viability of these batteries in the applications analysed., Spanish State Research Agency (AEI) grant PID2019-111262RB-I00/AEI/10.13039/501100011033; European Union H2020 Project STARDUST (74094). E. Braco was supported by a Predoctoral Contract of the Government of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Analysis of a CIS based PV generator versus a multicrystalline generator under outdoor long-term exposure

  • Parra Laita, Íñigo de la
  • Guerra Menjívar, Moisés Roberto
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
The worldwide growth of the PV market has been almost exponential during the last years. Together with conventional crystalline (c-Si) PV modules, “new” commercially available PV technologies such as copper indium selenide (CIS) based solar cells have appeared achieving a similar efficiency comparable to c-Si at similar production cost. In addition to the use of cheaper materials, CIS solar cells manufacturers claim some enhancements such as lower temperature coefficient or higher absorption of diffuse light that achieve to reduce the cost of electrical energy. Although several papers deal with this topic, little is known about real comparisons between CIS technology and conventional crystalline at a PV generator level with real test conditions. This paper analyses the in-field performance and degradation of a commercially available CIS solar based PV generator compared to a conventional c-Si one during four years of operation attributing the differences observed to the possible factors that can influence in both technologies., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RB-I00/AEI/10.13039/501100011033 and PID2019-110816RB-C21-I00/AEI/10.13039/501100011033
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Inertial response and inertia emulation in DFIG and PMSG wind turbines: emulating inertia from a supercapacitor-based energy storage system

  • Sacristán Sillero, Javier
  • Goñi Pérez, Naiara
  • Berrueta Irigoyen, Alberto
  • López Taberna, Jesús
  • Rodríguez Rabadan, José Luis
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The increasing wind power penetration in electrical power systems results in a reduction of operative conventional power plants. These plants include synchronous generators directly connected to the grid. Facing a change in grid frequency, these generators inherently respond by varying their stored kinetic energy and their output power, which contributes to grid stability. Such a response is known as inertial response. Wind turbines (WTs) are mostly based on Doubly-Fed Induction Generator (DFIG) or Permanent Magnet Synchronous Generator (PMSG) machines. Their power electronics interface decouples the electromechanical behaviour of the generator from the power grid, making their inertial response null or insignificant. Therefore, in order not to weaken the frequency response of the power system, WTs must be able to react to frequency variations by changing their output power, i.e., emulating an inertial response. Common techniques for inertia emulation in WTs rely on pitch control and stored kinetic energy variation. This contribution proposes a strategy (applicable for both DFIG and PMSG) which uses the energy stored in a supercapacitor connected to the back-to-back converter DC link to emulate the inertial response. Its performance is compared by simulation with aforementioned common techniques, showing ability to remove certain limitations., This work has been supported by Siemens Gamesa Renewable Energy, by the Spanish State Research Agency (AEI/ 10.13039/501100011033) under grants PID2019-111262RB-I00 and PID2019-110956RB-I00, and by the Public University of Navarra under project ReBMS PJUPNA1904
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Dynamic modeling and simulation of a pressurized alkaline water electrolyzer: a multiphysics approach

  • Iribarren Zabalegui, Álvaro
  • Barrios Rípodas, Ernesto
  • Ibaiondo, Harkaitz
  • Sánchez Ruiz, Alain
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
In this paper a dynamic model for the simulation of pressurized alkaline water electrolyzers is presented. The model has been developed following a multiphysics approach, integrating electrochemical, thermodynamic, heat transfer and gas evolution processes in order to faithfully reproduce the complete dynamical behavior of these systems. The model has been implemented on MATLAB/Simulink and validated through experimental data from a 1 Nm3h-1 commercial alkaline water electrolyzer, and the simulated results have been found to be consistent with the real measured values. This model has a great potential to predict the behavior of alkaline water electrolyzers coupled with renewable energy sources, making it a very useful tool for designing efficient green hydrogen production systems., This work has been supported by the Spanish State Research Agency. (AEI/10.13039/501100011033) under grants PID2019-111262RB-I00 and PID2019-110956RB-I00, and by Ingeteam R&D Europe.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Inverter-based PV ramp-rate limitation strategies: minimizing energy losses

  • González Moreno, Alejandro
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Marroyo Palomo, Luis
This work analyzes the reduction of power generation in strategies that regulate the PV ramp-rate by using inverter limitation. Although the operating principle implies some energy production losses, not all these losses are necessary. Three different strategies were simulated using experimental 5-second data collected throughout a year at a 38.6 MW PV plant, and their energy losses were obtained for different ramprate levels. An improvement in one of these strategies is proposed and evaluated. The main findings suggest that the proposed modification has the potential to drastically reduce annual production losses to insignificant levels. Regardless of the ramp-rate constrain, simulation results evidenced energy losses bellow 1%., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RBI00/AEI/10.13039/501100011033 and PID2019-110816RBC21-I00/AEI/10.13039/501100011033 as well as the Doctoral Scholarships funded by Public University of Navarre (UPNA).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Integration of second-life battery packs for self-consumption applications: analysis of a real experience

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Zorrilla, Pablo
  • Iribarren Zabalegui, Álvaro
  • Castillo, Diego H.
  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Rodríguez, Adolfo J.
  • Vargas Requena, David Tomás
  • Matías Maestro, Ignacio
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This contribution presents a methodology for the integration of Li-ion batteries discarded from electric vehicle into a collective self-consumption installation, showing the technical feasibility of such battery second use. In this regard, the state of charge (SOC) estimation is a relevant issue for the energy management of the second-life battery. Therefore, a SOC estimator is proposed in this contribution and tested in field. Moreover, the revealed costs analysis allows an economic comparison between the integration of a discarded battery pack in a second-life application or a remanufacture of these packs, thereby selecting the most suitable cells to build second-life batteries. This is a crucial issue for companies focused on the development of second-life batteries. The results obtained after testing the second-life battery pack in a real installation make it possible to extol the benefits of including this type of batteries in a self-consumption system, reaching a self-consumption ratio of 69 % and reducing by 36 % the maximum power peak demanded from the grid., This work has been supported by the Spanish State Research Agency (AEI) under grants PID2019-111262RB-I00 /AEI/ 10.13039/501100011033 and DPI2016–80641-R, the European Union under the H2020 project STARDUST (774094), the Government of Navarra through research project 0011–1411–2018–000029 GERA and the Public University of Navarra under project ReBMS PJUPNA1904. Also noteworthy is the support received from the Mexican Program for Strengthening Educational Quality (PFCE) (2017-2021) for the Postgraduate Program Master of Science and -UAT.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Particularised Kalman filter for the state-of-charge estimation of second-life lithium-ion batteries and experimental validation

  • Berrueta, Javier
  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
A critical issue for a proper energy management of a lithium-ion (Li-ion) battery is the estimation of its state-of-charge (SOC). There are various methods available for the SOC estimation, being some of them robust and accurate, but requiring high computational power for its applicability, which is inconvenient for their use with the usual low-cost microcontrollers that build a typical BMS. This contribution proposes an SOC estimation algorithm based on a simplified Kalman Filter, that combines a high accuracy with reduced computational requirements. The proposed simplifications result from a careful analysis of the Li-ion battery performance and linearization of processes that entail negligible loss of accuracy. The proposed algorithm is used to estimate the SOC of a second-life Li-ion battery operating in an experimental PV self-consumption facility. Its performance, in terms of accuracy, robustness and computational requirement, is compared with an Extended Kalman Filter (EKF), a Particle Filter (PF) and other low-performance estimation algorithms, proving its tradeoff between accuracy and computational cost., This work has been supported by the Spanish State Research Agency (AEI) under grant PID2019-111262RB-I00 /AEI/ 10.13039/501100011033, the European Union under the H2020 project STARDUST (774094), the Government of Navarra through research project 0011–1411–2018–000029 GERA and the Public University of Navarra under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

On the technical reliability of lithium-ion batteries in a zero emission polar expedition

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Oficialdegui, Ignacio
This contribution presents a technical analysis of the Lithium-ion batteries (LIBs) used in the WindSled project. In this project, an expedition has been carried out by means of a 0-emission vehicle that have covered more than 2500 kilometers in Antarctica Eastern Plateau pulled by kites. This adventure allowed the performance of 10 scientific experiments with a minimal disturbance of the polar environment. The required electricity for the survival and the scientific experimentation was delivered by flexible PV panels installed on the sled and commercial LIBs. The study performed in this contribution aims at the quantification of the LIBs degradation after the expedition. The results show a capacity fade of 5 % and an internal resistance increase of 30 %. Based on these results, it can be claimed that the LIBs used in the WindSled Project can successfully operate under -40°C. Moreover, these batteries can be used in upcoming expeditions, entailing an improvement from an economical and environmental point of view compared to primary batteries., Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018- 000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.