- Angurel, Luis A.
- Özçelik, Bekir
- Amaveda, H.
- Fuente, Germán F. de la
Resumen del trabajo presentado a la International Conference on Advanced Materials Science and Engineering and High Tech Devices Applications (ICMATSE), celebrada en Ankara (Turkiye) del 27 al 29 de octubre de 2022., The Laser Furnace (LF) technology has been used to produce uniform, dense MnFe2O4 spinel disks from a mixture of Fe and Mn oxides for controlled synthesis of spinel nanoparticles via Laser Ablation. Application of a CO2 laser in Line Scan mode onto a sample with the desired stoichiometry, enabled melt processing above 1580ºC at its
outer surface layer. In this process, a combination of a laser system and a continuous roller furnace operating at a maximum volume temperature of 1000ºC is used. Such combination helps avoid excessive thermal stress, crack formation and catastrophic failure of these magnetic ceramic monoliths. Higher energy incubation values yield
increased molten volumes and a thicker resolidified surface layer with a dense microstructure. Despite the high solidification rates imposed, MnFe2O4 spinel is the main phase obtained according to X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and magnetization studies. LF processed samples exhibit a reduction of the coercive fields and an increase of the saturation magnetization values, evidence for soft ferromagnetism and characteristic of the magnetic behavior associated with this spinel. This work demonstrates the convenience of the LF method for preparation of uniform, dense targets for Laser Ablation and other evaporation based techniques used in the fabrication of nanoparticles., B. Özçelik acknowledges to the Scientific and Technological Research Council of Turkey (TUBITAK) for a grant via 2219-Science Fellowships and Grant Programmes Department, with the project number:1059B192000390. Work funded by the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R)., No