Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal films by laser ablation backwriting on glass

  • Angurel, Luis A.
  • Molina Mansilla, Ricardo
  • Rico, Víctor J.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Muñoz Rojas, David
  • Huerta, C. M. de la
  • Nguyen, V. H.
  • Fuente, Germán F. de la
Resumen del trabajo presentado a la Science and Applications of Thin Films, Conference & Exhibition; celebrada en Izmir (Turquia) del 17 al 21 de septiembre de 2018., The use of lasers to achieve transformations at interfaces, either on solids under air, controlled atmospheres or a diversity of liquid environments, is evolving at a fast pace and in-line with recent advances in photonic technologies. The singular properties of lasers, which provide a choice of emission parameters, such as emission wavelength, pulsed or cw mode and pulse width, together with the use of optomechanical means to scan in beam or line fashion, are ideal in order to trigger physico-chemical phenomena which are not available with alternative methods and are, at large, based on thermally activated processes. Recently developed methods in our Laboratories include those that are based, on the one hand, on strongly photothermal interactions; on the other, on mixed type interactions, where photothermal, photophysical and, in some cases, photochemical types may cohexist. In the former case, a solid may melt and, with the controled laser movement, directionally solidify into a material with controlled microstructure. In the latter case, an ablation process with extreme physical or chemical consequences may be triggered and be localised at the irradiated interface. A brief description of the phenomena behind laser-solid interactions will be presented, along with results obtained with the Laser Ablation Backwriting (LAB) method and applied to surface modification of glass. This has been recently developed in order to modify physico-chemical and functional properties of glass surfaces at large, based on this fully scaleable method. In particular, selective metallization of glass surfaces will be addressed in this talk., This research is partially supported by projects MAT2016-79866-R, ENE2017-83669-C4-1-R (Agencia Estatal de Investigación & Programa FEDER), PHOBIC2ICE (EU GA 690819) and SPRINT (EU H2020-FETOPEN 801464)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser induced high temperature surface chemistry

  • Rey-García, F.
  • Rico, Víctor J.
  • Bao-Varela, C.
  • Angurel, Luis A.
  • González-Elipe, Agustín R.
  • Fuente, Germán F. de la
Resumen del póster presentado a la XXXVII Reunión Bienal de la Real Sociedad Española de Química, celebrada en Donostia-San Sebastián del 26 al 30 de mayo de 2019., Ceramic tiles are widely used as construction materials because of their outstanding mechanical properties (high strength, hardness, toughness and abrasion resistance), chemical inertness and aesthetic appearance. Concomitantly, a variety of new functionalities have been demonstrated during recent years, by developing appropriate frit and glaze compositions. Laser processing has been intensively utilized to improve surface characteristics, either applying ablative laser regimes or intense mid-IR emission beams that enable high temperature surface melting. In this context, in addition to the numerous thermal annealing procedures reported in the literature and applied to industry to modify the surface properties of ceramics, a novel Laser Furnace (LF) method has been recently patented. It enables modifying the surface finish of solids by inducing high temperature (1500-3000 °C) reactions at surfaces and interfaces, while maintaining volume temperatures at relatively low values (i.e. below 1200 °C). This paper deals with the application of this laser technology to the coloring of ceramic tiles previously deposited with either metal and oxide precursor thin films, or, alternatively with noble metal-organic layers. These layer/tile systems have been treated both, with nIR ns pulsed lasers and by cw CO2 lasers with emission in the mid-IR. The latter were coupled into a roller furnace to induce chemical processes which result in a variety of coloring effects., The authors gratefully acknowledge funding from MICINN and AEI (ENE2017-83669-C4-1-R and MAT2016-79866-R), FEDER/EU (project SPRINT (EU H2020-FET-OPEN/0426)) and Gobierno de Aragón (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser line scanning for large area surface microstructure control

  • Santos, H.
  • Angurel, Luis A.
  • Trujillo, F. J.
  • Muñoz Rojas, David
  • Masse, C.
  • Nguyen, V. H.
  • Bea, J. A.
  • Fuente, Germán F. de la
Resumen del póster presentado a la XXXVII Reunión Bienal de la Real Sociedad Española de Química, celebrada en Donostia-San Sebastián del 26 al 30 de mayo de 2019., Large-scale industrial materials must comply with crucial requirements beyond their technical specifications. The overall economy of any material system designed is a priority, leading to a complex equilibrium between costs and performance. Ultimate feasibility assessments rely on materials design efforts, particularly in processes exposed to extreme corrosive environments as well as those with high quality requirements in terms of interfacial defects in multilayer devices. In such systems surface engineering plays a key role, offering the means to maximize the life span of a certain material system. In parallel to the intrinsic cost savings derived in terms of maintenance, certain techniques allow an extreme control of the processing conditions, resulting in lower consumption of reactants, time and energy. This is the case of laser surface processing, particularly regarding laser line scanning (LLS). Such technique combines the transverse movement of a target with the fixed scanning linear movement of the laser spot along the axis perpendicular to the probe’s displacement. This technique has been applied to well-studied systems as Fe-Al protective coatings, rendering useful development paths to improve the alloying performance addressing subjects as: grain microstructure orientation, stoichiometric gradients smothering, segregation dispersion or interface defects density. The present work takes into account the above considerations, in an attempt to adapt this novel Laser Line Scanning method to process functional metal oxide coatings. With the help of standard simulation models, attempts to densify coated surfaces, as well as to control microstructure, will be described., The authors gratefully acknowledge the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (project ENE2017-83669-C4-1-R and MAT2016-79866-R), from EU (project SPRINT (EU H2020-FETOPEN/0426), PHOBIC2ICE (EU GA 690819)), and from the Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High speed processing of NiFe2O4 spinel using a laser furnace

  • Özçelik, Bekir
  • Özçelik, S.
  • Amaveda, H.
  • Santos, H.
  • Borrel, C. J.
  • Sáez-Puche, R.
  • Fuente, Germán F. de la
  • Angurel, Luis A.
The Laser Furnace (LF) method has been applied to directionally solidify NiFe2O4 spinel disks from a mixture of Fe and Ni oxides in order to obtain uniform, dense targets for controlled synthesis of spinel nanoparticles via Laser Ablation. Application of a CO2 laser in Line Scan mode onto a sample with the desired stoichiometry, enabled melt processing above 1580 °C at its outer surface layer. This process was carried out inside a continuous roller furnace at a maximum volume temperature of 1000 °C. Such combination helps avoid excessive thermal stress, crack formation and catastrophic failure of these magnetic ceramic monoliths. Higher energy incubation values yield increased molten volumes and a thicker resolidified surface layer with a dense microstructure. Despite the high solidification rates imposed, NiFe2O4 spinel is the main phase obtained according to X-Ray Diffraction (XRD) and magnetization studies. LF processed samples exhibit a reduction of the coercive fields and an increase of the saturation magnetization values, evidence for soft ferromagnetism and characteristic of the magnetic behaviour associated with this spinel. This work demonstrates the convenience of the LF method for preparation of uniform, dense targets for Laser Ablation and other evaporation based techniques used in the fabrication of nanoparticles., The authors acknowledge financial support from MINECO-AEI-FEDER, EU (projects MAT2016-79866-R and ENE2017-83669-C4-1-R) and SPRINT (EU H2020-FET-OPEN/0426) projects and from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-induced scanning transfer deposition of silver electrodes on glass surfaces: A green and scalable technology

  • Molina Mansilla, Ricardo
  • Ertuğrul, M.
  • Navarro, Rafael
  • Rico, Víctor J.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Fuente, Germán F. de la
  • Angurel, Luis A.
A pulsed laser ablation backwriting technique with high repetitive rates is implemented for the fabrication of silver coatings on glass surfaces. This method enables geometrical constraint-free deposition of metallic coatings. These exhibit sufficiently low electrical resistance to be used as electrodes in dielectric barrier discharge (DBD) plasma elements. Ambient air deposition of metallic silver electrodes on standard glass slides is explored using a sub-ns UV laser source, combined with hybrid beam scanning methods. The green nature of the overall deposition process includes a preliminary irradiation scan to homogenise the target surface before the subsequent backwriting step. Metal transfer is achieved by combining two phenomena within a simple beam scanning process: LIRT (laserinduced reverse transfer) of silver from the target to the glass, with a partial and secondary LIFT (Laser-Induced Forward Transfer) of silver from the glass to the target. Appropriate selection of pulse energy and pulse repetition rates, beam scanning velocities and target motion enable the growth of sufficiently thick Ag deposits on glass with the required low electrical resistivity and nearly 2D constraint-free geometry. This method avoids the use of vacuum and liquids, resulting in a cheap, facile and green methodology for the deposition of silver electrodes onto transparent substrate surfaces., This paper is dedicated to the memory of Prof. Rafael Navarro. The authors gratefully acknowledge the financial support from Spanish MINECO-AEI and EU FEDER Program (projects ENE2017-83669-C4-1-R and MAT2016-79866-R), from EU project SPRINT (H2020-FETOPEN 801464) and from the Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R). Authors also would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI and the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 2D Porous Crystalline Materials in Simulated Microgravity

  • Contreras-Pereda, Noemí
  • Rodríguez-San Miguel, David
  • Franco, Carlos
  • Sevim, Semih
  • Vale, João Pedro
  • Solano, Eduardo
  • Fong, Wye-Khay
  • Del Giudice, Alessandra
  • Galantini, Luciano
  • Pfattner, Raphael
  • Pané, Salvador
  • Sotto Mayor, Tiago
  • Ruiz Molina, Daniel
  • Puigmartí Luis, Josep
To date, crystallization studies conducted in space laboratories, which are prohibitively costly and unsuitable to most research laboratories, have shown the valuable effects of microgravity during crystal growth and morphogenesis. Herein, an easy and highly efficient method is shown to achieve space-like experimentation conditions on Earth employing custom-made microfluidic devices to fabricate 2D porous crystalline molecular frameworks. It is confirmed that experimentation under these simulated microgravity conditions has unprecedented effects on the orientation, compactness and crack-free generation of 2D porous crystalline molecular frameworks as well as in their integration and crystal morphogenesis. It is believed that this work will provide a new “playground” to chemists, physicists, and materials scientists that desire to process unprecedented 2D functional materials and devices., N.C.-P., D.R.-S.-M., C.F. contributed equally to this work. This work was supported by the European Research Council Starting Grant microCrysFact (ERC-2015-STG No. 677020), the Horizon 2020 FETOPEN project SPRINT (No. 801464), the Swiss National Science Foundation (project no. 200021_181988), grant MAT 2015-70615-R from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). N.C.-P. acknowledges support from “laCaixa” Foundation (fellowship ID 100010434). The fellowship code is LCF/BQ/ES17/11600012. N.C.-P. also acknowledges the financial support of COST action MP1407. R.P. acknowledges support from the Marie Curie Cofund, Beatriu de Pinós Fellowship AGAUR 2017 BP 00064. The GIWAXS experiments were conducted on the NCD-SWEET beamline of the ALBA synchrotron, Spain and on the SAXS/WAXS beamline of the Australian Synchrotron, ANSTO, Australia. GIWAXS experiments of Ni3(HITP)2 and COF-TAPB-BTCA were performed at the NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. The authors acknowledge the support of the ANSTO, in providing the facilities for the GIWAXS experiments used for the characterization of COF-TAPB-BTCA in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, magnetic, photocatalytic and blood compatibility studies of nickel nanoferrites prepared by laser ablation technique in distilled water

  • Özçelik, Sezen
  • Yalçın, B.
  • Arda, L.
  • Santos, H.
  • Sáez-Puche, R.
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Özçelik, Bekir
The main objective of this study is to investigate the structural features, magnetic behaviour, photocatalytic properties and blood compatibility of NiFe2O4 nanoparticles (NPs) obtained by subnanosecond laser ablation in water. Structure and size distribution of NPs were studied using X-Ray Diffractometry (XRD) and Transmission Electron Microscopy (TEM). The photocatalytic properties of NPs were evaluated by photo-degradation of Methylene Blue (MeB) dye under ambient visible light illumination. Four different kinetic models were used to identify the photocatalytic degradation mechanism of NiFe2O4 nanoparticles and it was found that the pseudo-second-order model was the most suitable type to interpret the experimental kinetic data of MeB photodegradation. The hemocompatibility of NiFe2O4 nanoparticles was studied by hemolysis tests using human erythrocytes drawn from healthy volunteers. NiFe2O4 nanoparticles caused undesirable hemolysis ratios at 0.05, 1 and 5 mg/ml concentrations, while the biologically safe concentration of these nanoparticles was found to be below 0.01 mg/ml., The authors acknowledge financial support from Spanish MINECO-AEI-FEDER EU (project ENE2017-83669-C4-1-R) and SPRINT (EU H2020-FET-OPEN/0426) projects and from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser induced reverse transfer

  • Rey-García, F.
  • Bao, Chenchen
  • Angurel, Luis A.
  • Fuente, Germán F. de la
Resumen del trabajo presentado a la International Conference on Advanced Materials Science and Engineering and High Tech Devices Applications (ICMATSE), celebrada en Ankara (Turkiye) del 27 al 29 de octubre de 2022., Laser irradiation of transparent substrates in front of an absorbing target results in ablation of the target material and the consequent coating on the back of such substrate. The use of pulsed near-IR lasers is reviewed in this talk, with particular attention to coatings or surface modification produced on glass substrates. This method enables the fabrication of thin coatings on glass at low cost and without the need for vacuum or chemicals. It is thus attractive from the environmental and efficiency points of view. This relatively new fabrication method will be briefly presented and overviewed, and a number of examples analyzed in relation to the coatings obtained and types of lasers used., Work funded by EU project SPRINT (H2020-FETOPEN 801464), the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Aplicación de tecnologías láser para el control de la cristalinidad de capas de Cu2O Y ZnO depositadas por SALD

  • Frechilla, Alejandro
  • Toldra-Reig, Fidel
  • Sekkat, A.
  • Crivello, C.
  • Santos, H.
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Muñoz-Rojas, David
Resumen del trabajo presentado al XVI Congreso Nacional de Materiales, celebrado en Ciudad Real del 28 de junio al 1 de julio de 2022., Los autores agradecen la financiación de la Comisión Europea a través del proyecto SPRINT (H2020-FETOPEN 801464) y del Gobierno de Aragón (Grupo de investigación T54_20R). Los autores también agradecen a la Universidad de Zaragoza el uso del Servicio General de Apoyo a la Investigación-SAI., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generating colours through a novel approach based on spatial ALD and laser processing

  • Frechilla, Alejandro
  • Sekkat, A.
  • Dibenedetto, M.
  • Presti, Francesca lo
  • Porta-Velilla, Luis
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Muñoz-Rojas, David
This work studies the combination of direct femtosecond laser structuring of metal surfaces and Spatial Atomic Layer Deposition (SALD) of metal oxides as a novel approach to generate colours on different types of day-to-day metallic objects. In particular, a stainless-steel knife and an outdated 25 ct Dutch florin coin have been selected for the study. Our results show that it is possible both, to preserve the iridescence properties produced by laser processing and to tune the final metal surface colour by controlling the thickness of the ZnO coating. At the same time, this oxide coating could act as a protecting layer for the original material. We thus explore two different strategies to generate colour, namely, iridescence and interference, which can be even developed selectively. This novel methodology to colour metallic surfaces is a promising route to achieve cheap, scalable, and high-throughput processing methods and opens up a new avenue of possibilities and applications related to colour., The authors gratefully acknowledge the financial support from EU project SPRINT (H2020-FETOPEN 801464), Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and from the Gobierno de Aragón (research group T54_23R). Authors also would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI and Laboratorio de Microscopías Avanzadas at University of Zaragoza. A. Frechilla and L. Porta-Velilla acknowledge support of the Gobierno de Aragón through their predoctoral contract. DMR and FLP acknowledge support from the Ministère de l’Europe et des Affaires étrangères (MEAE) the Ministère de l’Enseignement Supérieur et de la Recherche (MESR) and the Ministero dell’Istruzione, dell’Università e della Ricerca (MIUR) through a PhC Galilée/Galileo project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser annealing of transparent ZnO thin films: a route to improve electrical conductivity and oxygen sensing capabilities

  • Frechilla, Alejandro
  • Frechilla, Javier
  • Angurel, Luis A.
  • Toldra-Reig, Fidel
  • Balas, Francisco
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Muñoz-Rojas, David
The chemical deposition of high-performance zinc oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work demonstrates how ultra-short-pulse laser beam scanning (LBS) can be used to modulate electrical conductivity in ZnO thin films deposited on soda–lime glass by spatial atomic layer deposition (SALD), a high-throughput, low-temperature deposition technique suitable for large-area applications. By systematically optimizing laser parameters, including pulse energy and hatching distance, significant improvements in the electrical performance of 90 nm-thick ZnO films were achieved. The optimization of the laser annealing parameters – 0.21 μJ per pulse energy and a 1 μm hatching distance—yielded ZnO films with an electrical resistivity of (9 ± 2) × 10−2 Ω cm, 3 orders of magnitude lower than as-deposited films. This result suggests that laser post-deposition processing can play an important role in tailoring the properties of ZnO thin films. Excessive laser intensity can compromise structural integrity of the films, however, degrading their electrical transport properties. Notably, the electrical resistance of laser-annealed ZnO films exhibited high sensitivity to oxygen concentration in the surrounding atmosphere, suggesting exciting prospects for application in devices based on transparent oxygen sensors. This study thus positions ultra-short pulsed laser annealing as a versatile post-deposition method for fine-tuning the properties of ZnO thin films, enabling their use in advanced optoelectronic and gas-sensing technologies, particularly on temperature-sensitive substrates., The authors gratefully acknowledge the financial support from EU project SPRINT (H2020-FETOPEN 801464), Spanish projects PID2020-113034RB-I00 (funded by MCIN/AEI/10.13039/501100011033) and PID2023-146041OB-C21 (funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU) and from Gobierno de Aragón (research group T54_23R). The authors would like to acknowledge the use of “Servicio General de Apoyo a la Investigación (SAI)” and the Spanish National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at the University of Zaragoza. A. Frechilla and J. Frechilla acknowledge support from Gobierno de Aragón via predoctoral contracts., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Generating colours through a novel approach based on spatial ALD and laser processing

  • Frechilla, A.
  • Sekkat, A.
  • Dibenedetto, M.
  • lo Presti, F.
  • Porta-Velilla, L.
  • Martínez, E.
  • de La Fuente, G.F.
  • Angurel, L.A.
  • Muñoz-Rojas, D.
This work studies the combination of direct femtosecond laser structuring of metal surfaces and Spatial Atomic Layer Deposition (SALD) of metal oxides as a novel approach to generate colours on different types of day-to-day metallic objects. In particular, a stainless-steel knife and an outdated 25 ct Dutch florin coin have been selected for the study. Our results show that it is possible both, to preserve the iridescence properties produced by laser processing and to tune the final metal surface colour by controlling the thickness of the ZnO coating. At the same time, this oxide coating could act as a protecting layer for the original material. We thus explore two different strategies to generate colour, namely, iridescence and interference, which can be even developed selectively. This novel methodology to colour metallic surfaces is a promising route to achieve cheap, scalable, and high-throughput processing methods and opens up a new avenue of possibilities and applications related to colour.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Laser-induced scanning transfer deposition of silver electrodes on glass surfaces: A green and scalable technology

  • Molina R.
  • Ertugrul M.
  • Larrea Á.
  • Navarro R.
  • Rico V.
  • Yubero F.
  • González-Elipe A.R.
  • Fuente G.F. de la
  • Angurel L.A.
A pulsed laser ablation backwriting technique with high repetitive rates is implemented for the fabrication of silver coatings on glass surfaces. This method enables geometrical constraint-free deposition of metallic coatings. These exhibit sufficiently low electrical resistance to be used as electrodes in dielectric barrier discharge (DBD) plasma elements. Ambient air deposition of metallic silver electrodes on standard glass slides is explored using a sub-ns UV laser source, combined with hybrid beam scanning methods. The green nature of the overall deposition process includes a preliminary irradiation scan to homogenise the target surface before the subsequent backwriting step. Metal transfer is achieved by combining two phenomena within a simple beam scanning process: LIRT (laser-induced reverse transfer) of silver from the target to the glass, with a partial and secondary LIFT (Laser-Induced Forward Transfer) of silver from the glass to the target. Appropriate selection of pulse energy and pulse repetition rates, beam scanning velocities and target motion enable the growth of sufficiently thick Ag deposits on glass with the required low electrical resistivity and nearly 2D constraint-free geometry. This method avoids the use of vacuum and liquids, resulting in a cheap, facile and green methodology for the deposition of silver electrodes onto transparent substrate surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Laser annealing of transparent ZnO thin films: a route to improve electrical conductivity and oxygen sensing capabilities

  • Frechilla, A.
  • Frechilla, J.
  • Angurel, L. A.
  • Toldrá-Reig, F.
  • Balas, F.
  • Martínez, E.
  • de La Fuente, G. F.
  • Muñoz-Rojas, D.
The chemical deposition of high-performance zinc oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work demonstrates how ultra-short-pulse laser beam scanning (LBS) can be used to modulate electrical conductivity in ZnO thin films deposited on soda–lime glass by spatial atomic layer deposition (SALD), a high-throughput, low-temperature deposition technique suitable for large-area applications. By systematically optimizing laser parameters, including pulse energy and hatching distance, significant improvements in the electrical performance of 90 nm-thick ZnO films were achieved. The optimization of the laser annealing parameters – 0.21 μJ per pulse energy and a 1 μm hatching distance—yielded ZnO films with an electrical resistivity of (9 ± 2) × 10−2 Ω cm, 3 orders of magnitude lower than as-deposited films. This result suggests that laser post-deposition processing can play an important role in tailoring the properties of ZnO thin films. Excessive laser intensity can compromise structural integrity of the films, however, degrading their electrical transport properties. Notably, the electrical resistance of laser-annealed ZnO films exhibited high sensitivity to oxygen concentration in the surrounding atmosphere, suggesting exciting prospects for application in devices based on transparent oxygen sensors. This study thus positions ultra-short pulsed laser annealing as a versatile post-deposition method for fine-tuning the properties of ZnO thin films, enabling their use in advanced optoelectronic and gas-sensing technologies, particularly on temperature-sensitive substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of 2D porous crystalline materials in simulated microgravity

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Franco, Carlos|||0000-0003-3385-2851
  • Sevim, Semih
  • Vale, Joao Pedro
  • Solano, Eduardo|||0000-0002-2348-2271
  • Fong, Wye-Khay
  • Del Giudice, Alessandra
  • Galantini, Luciano|||0000-0001-5484-2658
  • Pfattner, Raphael|||0000-0002-7232-1845
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sotto Mayor, Tiago
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
To date, crystallization studies conducted in space laboratories, which are prohibitively costly and unsuitable to most research laboratories, have shown the valuable effects of microgravity during crystal growth and morphogenesis. Herein, an easy and highly efficient method is shown to achieve space-like experimentation conditions on Earth employing custom-made microfluidic devices to fabricate 2D porous crystalline molecular frameworks. It is confirmed that experimentation under these simulated microgravity conditions has unprecedented effects on the orientation, compactness and crack-free generation of 2D porous crystalline molecular frameworks as well as in their integration and crystal morphogenesis. It is believed that this work will provide a new "playground" to chemists, physicists, and materials scientists that desire to process unprecedented 2D functional materials and devices.