Pasar al contenido principal

RECURSOS MULTIDISCIPLINARES PARA EL DIAGNOSTICO SISMICO. MICROZONACION Y DAÑO.

PID2020-117374RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evidences of directional soil response comportment

  • Lucas Rojas, Luis José
  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Salinas Naval, Víctor
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Clapés Boixader, Jaime|||0000-0001-5070-8662
In recent years, the importance of considering other peaks than the predominant in the soil response has been revendicated. One possible explanation for some of these secondary peaks in the soil response is the presence of strong lateral variations in the geology of the area. Specifically, the existence of paleochannels and streams in the city of Barcelona has been associated with the appearance of some of these double peaks. This work stems from the idea that it is reasonable that a linear structure such as a paleochannel or stream produces a directionality in the response of the site and therefore the directional peak does only affect the structures in this specific direction. On the other hand, the peak produced by the half-space outside the stream may also present a certain degree of directionality that influences the behavior of the structures. To study this possible phenomenon, we have chosen an area close to the border between Barcelona and L'Hospitalet de Llobregat, and, analyzed 11 ambient noise Horizontal to Vertical Spectral Ratio (HVSR) soil response measurements of 40 minutes length and applying circular statistics to the results. The results show clear indications of this directional behavior of the response peaks., This work has been partially supported by the European Regional Development Fund (FEDER), the Government of Spain (Ministry of Science and Innovation) and the European Union, through the reference projects EFA158/16/POCRISC and PID2020117374RB-I00/ AEI/10.13039/501100011033
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estimation of the dynamic seismic response of buildings through transfer functions: a probabilistic approach

  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom system. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a simplified methodology to obtain a probabilistic and reliable estimate of the seismic response of buildings. To do so, a set of transfer functions associated to the dynamic response of a building model are obtained. Then, an optimal transfer function is identified as the one maximizing the prediction of engineering demand parameters (EDPs) when the structure is subjected to a large set of ground motions records. Results show that using a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of material-performance relationship, as well as in the estimation of the expected risk.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Average response of single degree of freedom systems for estimating the nonlinear response of structures

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • González Drigo, José Ramón|||0000-0003-2808-670X
The development of efficient proxies that allow approximating the nonlinear dynamic response of buildings is a paramount step in estimating seismic risk. Classical methodologies have been oriented to analyse the causal relationship between intensity measures (IM) and engineering demand parameters (EDP) extracted from nonlinear models. In this research, it has been proposed an innovative procedure for estimating this nonlinear behaviour by using the average response of a set of single-degree-of-freedom (SDoF) systems. This approach allows capturing the time-history response of a complex structure with less computational effort though high efficiency. In order to prove this, it has been estimated the maximum global drift ratio, MGDR, of more than one-thousand multi-degree of freedom systems representing Reinforced Concrete structures, whose number of stories vary from 3 to 13, by using nonlinear dynamic analysis, NLDA. Then, it has been calculated the MGDR by using both the time history response of a unique SDoF, with the fundamental period of the structure, and the average response of several oscillators, as proposed in this research. After employing cloud analysis, it has been observed that the MGDR, calculated using NLDA, is better approximated by using the average response of several SDoFs than a single SDoF. Similar conclusions can be drawn if analysing the nonlinear dynamic response of more than one-thousand steel frame structures, whose number of stories vary from 3 to 20., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with references: PID2020-117374RBI00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Concrete-filled cold-formed chord studs to improve the seismic performance of steel framing buildings

  • Navarro Granados, Jordi
  • Bové Tous, Oriol|||0000-0003-0006-0620
  • Casafont Ribera, Miguel|||0000-0001-6167-9465
  • Bonada Bo, Jordi|||0000-0002-4495-2295
  • López Almansa, Francisco|||0000-0002-7359-110X
Light gauge steel framing is increasingly used, mainly for low-rise buildings. However, for mid-rise buildings, their lateral strength is rather low; therefore, seismic effects can be highly demanding. Steel bracing has been proposed for such buildings, but the chord studs are severely overloaded, thus limiting the building seismic performance (European codes state that, for a ductile behavior, the chord studs need to withstand the maximum force that can be transmitted by the braces). In some cases, steel-only solutions might be insufficient; this paper investigates the use of concretefilled cold-formed built-up sections for the chord studs. Three 5, 7 and 10-story prototype buildings located in seismic areas (PGA 0.2, 0.3 and 0.4 g) are analyzed. A previous study showed that steel-only solutions are only feasible in some cases: 5 and 7-story buildings for PGA 0.2 and 0.3 g, and 10-story building for only 0.2 g. On the contrary, by using concrete-filled built-up sections in the chord studs of the bottom and mid-height levels, in all the cases all the design requirements have been satisfactorily fulfilled., The first author PhD is funded by the Generalitat de Catalunya (Catalonian Government). grant No. 2020 DI 089. This research has been also funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) project PID2020-117374RB-I00 /AEI/10.13039/501100011033. These supports are gratefully acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OMA of a School Building Damaged by the Illapel Earth-quake (Chile 2015)

  • Reyes, Juan Patricio
  • Valdebenito, Galo
  • Oliver Saiz, Maria Elena|||0000-0002-7693-0170
  • López Almansa, Francisco|||0000-0002-7359-110X
The Illapel earthquake struck Chile in 2015, causing fatalities, wounded, missing, and many people left homeless. It also damaged buildings, particularly school buildings. This research refers to the “San Rafael de Rozas” school, located in Illapel (Chile). It was visited after the event, and a simplified OMA (Operational Modal Analysis) of the damaged building was performed; it is required to estimate the modal parameters (mainly, natural periods) of the damaged building. This three-story building was built in 2003 and has an L-plan configuration. The structure consists of RC columns, beams, and slabs; in general, the construction quality was bad. The non-structural components significantly influenced the seismic behavior, chiefly the masonry infill walls. Noticeably, most of them are incomplete (i.e., leave a free space in the top, mainly for lighting); this leads to short columns, which are harmful to the building's seismic capacity. Accordingly, the damage was mainly concentrated in the short columns. For the abovementioned OMA, triaxial acceleration and velocity-sensitive seismographs were installed on the floors of the 3 stories; each measurement lasted 6 minutes at a sampling frequency of 512 Hz., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033; the field trip was funded by the Universidad Austral de Chile (Natural and Anthropogenic Risk Research Center, RINA and the Vice-rectory of Research, Development and Art). These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Spectral-velocity-based intensity measures: a new proposal to improve seismic risk assessment

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
The probabilistic characterization of the seismic hazard at a site is evolving from the concept of the 'Uniform Hazard Spectrum' (UHS) to the 'Uniform Risk Spectrum' (URS). The latter ensures that structures in different regions have the same probability of collapse in the face of potential earthquakes, regardless of the level of seismic hazard. One of the main inputs to the development of a URS is a collapse fragility function. This function should be representative of a large set of building typologies. However, it can have a large dispersion when derived from an intensity measure (IM) with low steadfastness. This statistical property allows the results of the dynamic response of several types of structures to be grouped without loss of efficiency. Therefore, the selection of an appropriate IM is crucial for the estimation of the vulnerability of structures and the assessment of seismic risk. Accordingly, the limitations of using acceleration as a physical quantity to represent seismic hazard are discussed in this study. The main one is related to the low causality with a measure of structural damage, such as the maximum inter-story drift ratio. Instead, IMs derived from the velocity spectrum are presented as a more efficient solution that can improve seismic risk estimates. Notwithstanding, the lack of ground motion prediction equations to define the attenuation of these IMs can be a limitation. This paper proposes to address this issue by analysing the resulting copula between a probabilistic set of spectral acceleration and velocity values. Then, based on the classical pseudo-spectral transformation, it has been proposed a correction oriented to improve the similarity between spectral and pseudo-spectral velocity values. Records acquired around Europe have been employed to do so. These findings can significantly contribute to decision making in the planning and design of earthquake resistant structures., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Scaling ground motion records by considering the inelastic response of soils

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Vaunat, Jean|||0000-0003-3579-9652
One of the main shortcomings of several seismic databases is the lack of ground motion records exhibiting high-intensity values. Consequently, when characterizing seismic risk, or in the design process of a civil infrastructure, it is generally necessary to scale up a significant amount of low-intensity records so that the nonlinear response of the analyzed system can be fully explored. However, this type of records does not reflect neither the stiffness degradation nor the increasing of damping in soils affected by high-intensity ground motions. This paper presents an innovative approach for scaling seismic records by taking into account both effects. To do so, the equivalent linear method has been employed in an iterative manner to scale up and get records meeting these important conditions. A database from Colombia containing almost two thousand ground motion records has been used to characterize the seismic hazard. Results show that low-amplitude records scaled following the presented approach exhibit an increase of intensities at certain periods, which is consistent with the one observed in actual high-intensity ground motion records. In addition, the inelastic response of the soil tends to modify the expected risk, showing that scaling using constant values can produce biased results. It has been observed after comparing fragility functions derived for records scaled using a single scalar vs those considering the inelastic response of the soil., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic fragility and damage models for framed-RC buidlings. Application to Barcelona, Spain

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • Gonzalez-Drigo, Ramon
A great number (1160) of framed-reinforced-concrete buildings, which are typical of residential buildings in many European and worldwide countries, have been modelled in a probabilistic way. Main geometric and strength properties have been defined by means of adequate probability distributions. Geometric features are sampled according uniform distributions, while strength properties are assumed to have normal distributions. Thus, for instance, concerning to geometry, numbers of frames and numbers of floors are considered in the ranges [3 - 6] and [3 - 13], and the height of the floors and the width of the frames are defined in the ranges [2.8-3.2] m and [4 - 6] m. Distribution types and corresponding parameters have been defined according to available information and data. An improved parametric model matching actual capacity spectra, is proposed. This way, capacity spectra, that have been developed for each individual building, are fully defined by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau) and µ (mu) and s (sigma) parameters, defining a lognormal function. New insights on the meaning and easy computation of µ (mu) and s (sigma) are provided: µ (mu) is directly related to ductility, while s (sigma) controls the way the strength of the building degrades. Afterwards, fragility and damage curves are obtained, and damage probability matrices are developed for a selected hazard-earthquake scenario. A district of the city of Barcelona, Spain, is used as a testbed. One of the advantages of the procedure is that it allows to adopt previous buildings’ classes as the typical low-rise, mid-rise and high-rise buildings’ categories but, also other groups preferred. Another advantage of the model is that, once the target earthquake has been selected, let’s say according to, for instance, its return period, damage scenarios, such as those ones with a predefined exceedance probability, let’s say, 50% or 95% exceedance probability, can be depicted on demand. Moreover, these probabilistic risk scenarios may be very useful for stakeholders in order to take ad-hoc proper measures for emergency planning and for earthquake prevention and protection., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reduced order models to estimate seismic risk of unreinforced masonry dwellings

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Gonzalez-Drigo, Ramon
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
In order to estimate seismic risk at an urban level it is necessary to consider several sources of uncertainty. However, the higher the uncertainties related to both structural modelling and seismic hazard, the higher the computational time to extract reliable information to assess seismic risk. Thus, simplifying the structural model significantly diminishes the computational effort, allowing analyzing several building models in a fraction of time. In this sense, one of the most simplified representations to approximate the horizontal dynamic response of a structure is the Single Degree of Freedom system (SDoF). It allows calculating time-history responses in an easy way, given a determined fundamental period and damping. Though, the response of an SDoF does not consider neither the stiffness’ loss because of plastic damage nor the participation of higher modes. Advanced intensity measures (IMs) look for addressing these shortcomings by averaging spectral quantities around the fundamental period (T1) of the analyzed building. Analogous to this approach, it is proposed to estimate the dynamic response of a building by averaging the time history response of a set of SDoF systems with periods in the interval (0.1T1, 1.8T1). The dynamic response associated with each of them has been estimated by means of the dynamic equilibrium equation for SDoF systems. In order to verify the efficiency of the proposed approach, it has been analyzed the dynamic behavior of unconfined masonry. This structural type is very prone to damage during an earthquake, as it has poor seismic performance. Observed damage and consequences of a catastrophic event occurred in Colombia (1999) have been used to verify the methodological approach, This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Corrosion assessment of reinforced concrete structures using ground-penetrating radar

  • Solla, Mercedes
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Fontul, Simona
Corrosion affecting reinforced concrete structures is a critical concern in civil engineering in terms of structural integrity, especially in critical infrastructure, safety risks to users, and long-term durability and safe operation over time, as well as for environmental impact and financial implications. Within this context, early detection of corrosion in reinforced concrete structures is crucial for time intervention, enabling preventive maintenance and anticipating future deterioration. This work proposes the GroundPenetrating Radar (GPR) as a recognized method for assessing corrosion in concrete structures. First, an overview of the effects of corrosion on the GPR signal, and how it can be detectable from the GPR data, is presented. Next, two different case studies are addressed, including the evaluation of a precast bridge deck in Galicia, and the unique structures of the UNESCO World Heritage Site of Park Güell in Barcelona. New trends on the development of robots to improve accessibility and autonomous data collection are also commented, as well as the use of artificial intelligence for automatic corrosion detection and the possibilities for data digitization into interoperable Building Information Modelling (BIM) and digital twin environments. Finally, it should be highlighted that identifying corrosion at an early stage allows engineers to take proactive measures to prolong the lifespan and serviceability of structures.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Guía para la evaluación de la vulnerabilidad de edificios esenciales (E4.2.1)

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
En esta comunicación se resume una guía para la evaluación de la vulnerabilidad sísmica de edificios esenciales, elaborada en el marco del proyecto EFA158/16/POCRISC. La guía incluye los antecedentes, los métodos de primer nivel (LM1), el método de segundo nivel (LM2), y el método de nivel avanzado (LMa), que se basa en el análisis dinámico. En el LM1, la acción se define por la intensidad macrosísmica y el edificio mediante índices de vulnerabilidad. En el LM2, la acción se define por el espectro de respuesta y el edificio por su espectro de capacidad y, en el LMa, la acción se define mediante acelerogramas y el edificio mediante modelos estructurales. Para un escenario específico los métodos permiten conocer las probabilidades de que se excedan determinados niveles o estados de daño en función de la severidad de la acción. La guía también aborda aspectos relacionados con la vulnerabilidad funcional y con la fragilidad social, cultural y económica.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robotics and GPR in Agriculture, Robòtica i georadar en agricultura, Robótica y radar de penetración terrestre en agricultura

  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Caballero Flores, David|||0000-0003-2809-1760
  • Rodríguez Calderón, Nuria|||0009-0006-0399-7362
  • Liso, Adriano
  • Sanchez Atienza, Marc
  • Domènech Mestres, Carles|||0000-0002-6058-0110
Ground Penetrating Radar (GPR) has become a valuable tool in precision agriculture for subsurface analysis. This work presents the adaptation of GPR to an autonomous robot that is being designed for agricultural tasks, capable of mapping the terrain using both Lidar and Computer Vision (CV) technologies. The integration of these systems will allow the robot to navigate autonomously while collecting data for mapping the surface and subsurface of the soil. The study focuses on the use of GPR data detect changes in the water content, enabling the robot to create detailed moisture maps of the shallow subsurface, providing insights into soil hydration levels. An additional objective is to enable the data collected by the robot to generate root maps, essential for understanding root growth and distribution. To achieve this, the aim is to determine the most effective method for detecting roots using GPR. The initial results of the project highlight the potential of autonomous robots equipped with GPR for optimizing agricultural practices, enhancing efficiency in field analysis and improving decision-making processes., This research was partially supported by the projects GroPeRBot (56-30147-2021-5A) of the Department of Climate Action, Food, and Rural Agenda of the Government of Catalonia, with additional funding from EAFRD (European Agricultural Fund for Rural Development), and ROOTBOT (ACC-2023- EXP-SIA001-13-0000101) of the Department of Agriculture, Livestock, Fisheries, and Food of the Government of Catalonia, co-financed with EAFRD funds. This research was also partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The authors would also like to thank Agrotech for their support and for allowing us to use the experimental fields at Agropolis for conducting tests and trials with the equipment and the robot.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multimode pushover analysis of unbraced racking systems

  • Golla, Vinod Kumar
  • Oliver Saiz, Maria Elena|||0000-0002-7693-0170
  • Bové Tous, Oriol|||0000-0003-0006-0620
  • Bonada Bo, Jordi|||0000-0002-4495-2295
  • López Almansa, Francisco|||0000-0002-7359-110X
Pushover analysis (incremental nonlinear static analysis) of structures has become increasingly popular due to its simplicity, being able to reproduce with reasonable precision the complex nonlinear dynamic behavior of buildings and other constructions undergoing several levels of strong seismic excitation. In order to gain more accuracy, several improvements to pushover have been proposed; among them, the so-called Modal Pushover Analysis consists in determining the structural response for several modes and combining them (commonly, quadratically). This approach has been mainly considered for tall buildings, as the influence of the higher modes can be significant. However, it might be also relevant for high-rise unbraced racking systems vibrating in their longitudinal (down-aisle) direction; conversely, so far only single-mode pushover analyses have been used for these structures. This paper aims to clarify this subject by assessing the relevance of the higher modes contribution. An unbraced representative prototype adjustable pallet racking system has been designed, according to European regulations, for a high seismicity region (PGA 0.4 g) and rigid soil. Only light goods have been considered, as heavy products most probably would require bracing. Modal pushover analysis of the prototype rack has been performed using a model implemented in Ansys; most of whose parameters are determined from available tests (both monotonic and cyclic). The rack down-aisle static behavior is described with a 2-D model that accounts for in-plane eccentricities and the connections nonlinear behavior (beam and floor-to-upright), as well as the geometric non-linearities (second-order).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Influence of the non-linear dynamic response of soils in the prediction of seismic risk

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
One of the key elements in characterizing the seismic response of civil structures is the local effect. It is because the expected ground motion acting on the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. This response depends mainly on the parameters of the soil beneath the structure and the characteristics of the ground motion acting at depth, where nonlinear effects are negligible. Accordingly, enhanced mathematical arrangements to predict the nonlinear response of complex multi-degree-of-freedom systems can be developed if considering the dynamic properties of the soil and the main features of the ground motions acting at the bedrock. In this article has been analysed the probabilistic nonlinear response of steel buildings by considering the energy dissipation of the soil profile due to the pass of seismic waves. To do so, it has been used a recently proposed computational framework for assessing seismic risk, which is able to consider these interactions via Monte Carlo simulation. For this purpose, random soil profiles have been generated to obtain a representative sample of probable scenarios affecting the study area. Then, the ability of intensity measures (IM) to predict the dynamic response in the linear and nonlinear regimes of the structures have been assessed via Multi-regression analysis. Scalar-based and vector-valued IMs considering not only features of the ground motion at the bedrock level but also from the soil profile and the buildings have been analysed. Results have been processed by considering the number of stories of the buildings. It is observed that if the regression analysis is performed by considering the entire set of structures, the efficiency tends to decrease. Notwithstanding, there are some specific arrangements exhibiting high-efficiency in spite of the aggrupation., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Average response of single degree of freedom systems for estimating the nonlinear response of structures

  • Vargas Alzate, Yeudy Felipe
  • Zapata Franco, Ana Maria
  • González Drigo, José Ramón
The development of efficient proxies that allow approximating the nonlinear dynamic response of buildings is a paramount step in estimating seismic risk. Classical methodologies have been oriented to analyse the causal relationship between intensity measures (IM) and engineering demand parameters (EDP) extracted from nonlinear models. In this research, it has been proposed an innovative procedure for estimating this nonlinear behaviour by using the average response of a set of single-degree-of-freedom (SDoF) systems. This approach allows capturing the time-history response of a complex structure with less computational effort though high efficiency. In order to prove this, it has been estimated the maximum global drift ratio, MGDR, of more than one-thousand multi-degree of freedom systems representing Reinforced Concrete structures, whose number of stories vary from 3 to 13, by using nonlinear dynamic analysis, NLDA. Then, it has been calculated the MGDR by using both the time history response of a unique SDoF, with the fundamental period of the structure, and the average response of several oscillators, as proposed in this research. After employing cloud analysis, it has been observed that the MGDR, calculated using NLDA, is better approximated by using the average response of several SDoFs than a single SDoF. Similar conclusions can be drawn if analysing the nonlinear dynamic response of more than one-thousand steel frame structures, whose number of stories vary from 3 to 20., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with references: PID2020-117374RBI00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OMA of a School Building Damaged by the Illapel Earth-quake (Chile 2015)

  • Reyes, Juan Patricio
  • Valdebenito, Galo
  • Oliver Saiz, Maria Elena
  • López Almansa, Francisco
The Illapel earthquake struck Chile in 2015, causing fatalities, wounded, missing, and many people left homeless. It also damaged buildings, particularly school buildings. This research refers to the “San Rafael de Rozas” school, located in Illapel (Chile). It was visited after the event, and a simplified OMA (Operational Modal Analysis) of the damaged building was performed; it is required to estimate the modal parameters (mainly, natural periods) of the damaged building. This three-story building was built in 2003 and has an L-plan configuration. The structure consists of RC columns, beams, and slabs; in general, the construction quality was bad. The non-structural components significantly influenced the seismic behavior, chiefly the masonry infill walls. Noticeably, most of them are incomplete (i.e., leave a free space in the top, mainly for lighting); this leads to short columns, which are harmful to the building's seismic capacity. Accordingly, the damage was mainly concentrated in the short columns. For the abovementioned OMA, triaxial acceleration and velocity-sensitive seismographs were installed on the floors of the 3 stories; each measurement lasted 6 minutes at a sampling frequency of 512 Hz., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033; the field trip was funded by the Universidad Austral de Chile (Natural and Anthropogenic Risk Research Center, RINA and the Vice-rectory of Research, Development and Art). These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reduced order models to estimate seismic risk of unreinforced masonry dwellings

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
  • Gonzalez-Drigo, Ramon
  • Tirado Gutiérrez, Rodolfo Javier
In order to estimate seismic risk at an urban level it is necessary to consider several sources of uncertainty. However, the higher the uncertainties related to both structural modelling and seismic hazard, the higher the computational time to extract reliable information to assess seismic risk. Thus, simplifying the structural model significantly diminishes the computational effort, allowing analyzing several building models in a fraction of time. In this sense, one of the most simplified representations to approximate the horizontal dynamic response of a structure is the Single Degree of Freedom system (SDoF). It allows calculating time-history responses in an easy way, given a determined fundamental period and damping. Though, the response of an SDoF does not consider neither the stiffness’ loss because of plastic damage nor the participation of higher modes. Advanced intensity measures (IMs) look for addressing these shortcomings by averaging spectral quantities around the fundamental period (T1) of the analyzed building. Analogous to this approach, it is proposed to estimate the dynamic response of a building by averaging the time history response of a set of SDoF systems with periods in the interval (0.1T1, 1.8T1). The dynamic response associated with each of them has been estimated by means of the dynamic equilibrium equation for SDoF systems. In order to verify the efficiency of the proposed approach, it has been analyzed the dynamic behavior of unconfined masonry. This structural type is very prone to damage during an earthquake, as it has poor seismic performance. Observed damage and consequences of a catastrophic event occurred in Colombia (1999) have been used to verify the methodological approach, This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic fragility and damage models for framed-RC buidlings. Application to Barcelona, Spain

  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • Gonzalez-Drigo, Ramon
A great number (1160) of framed-reinforced-concrete buildings, which are typical of residential buildings in many European and worldwide countries, have been modelled in a probabilistic way. Main geometric and strength properties have been defined by means of adequate probability distributions. Geometric features are sampled according uniform distributions, while strength properties are assumed to have normal distributions. Thus, for instance, concerning to geometry, numbers of frames and numbers of floors are considered in the ranges [3 - 6] and [3 - 13], and the height of the floors and the width of the frames are defined in the ranges [2.8-3.2] m and [4 - 6] m. Distribution types and corresponding parameters have been defined according to available information and data. An improved parametric model matching actual capacity spectra, is proposed. This way, capacity spectra, that have been developed for each individual building, are fully defined by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau) and µ (mu) and s (sigma) parameters, defining a lognormal function. New insights on the meaning and easy computation of µ (mu) and s (sigma) are provided: µ (mu) is directly related to ductility, while s (sigma) controls the way the strength of the building degrades. Afterwards, fragility and damage curves are obtained, and damage probability matrices are developed for a selected hazard-earthquake scenario. A district of the city of Barcelona, Spain, is used as a testbed. One of the advantages of the procedure is that it allows to adopt previous buildings’ classes as the typical low-rise, mid-rise and high-rise buildings’ categories but, also other groups preferred. Another advantage of the model is that, once the target earthquake has been selected, let’s say according to, for instance, its return period, damage scenarios, such as those ones with a predefined exceedance probability, let’s say, 50% or 95% exceedance probability, can be depicted on demand. Moreover, these probabilistic risk scenarios may be very useful for stakeholders in order to take ad-hoc proper measures for emergency planning and for earthquake prevention and protection., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Guía para la evaluación de la vulnerabilidad de edificios esenciales (E4.2.1)

  • Pujades Beneit, Lluís
  • Lantada, Nieves
  • González Drigo, José Ramón
En esta comunicación se resume una guía para la evaluación de la vulnerabilidad sísmica de edificios esenciales, elaborada en el marco del proyecto EFA158/16/POCRISC. La guía incluye los antecedentes, los métodos de primer nivel (LM1), el método de segundo nivel (LM2), y el método de nivel avanzado (LMa), que se basa en el análisis dinámico. En el LM1, la acción se define por la intensidad macrosísmica y el edificio mediante índices de vulnerabilidad. En el LM2, la acción se define por el espectro de respuesta y el edificio por su espectro de capacidad y, en el LMa, la acción se define mediante acelerogramas y el edificio mediante modelos estructurales. Para un escenario específico los métodos permiten conocer las probabilidades de que se excedan determinados niveles o estados de daño en función de la severidad de la acción. La guía también aborda aspectos relacionados con la vulnerabilidad funcional y con la fragilidad social, cultural y económica., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Spectral-velocity-based intensity measures: a new proposal to improve seismic risk assessment

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Zapata Franco, Ana Maria
The probabilistic characterization of the seismic hazard at a site is evolving from the concept of the 'Uniform Hazard Spectrum' (UHS) to the 'Uniform Risk Spectrum' (URS). The latter ensures that structures in different regions have the same probability of collapse in the face of potential earthquakes, regardless of the level of seismic hazard. One of the main inputs to the development of a URS is a collapse fragility function. This function should be representative of a large set of building typologies. However, it can have a large dispersion when derived from an intensity measure (IM) with low steadfastness. This statistical property allows the results of the dynamic response of several types of structures to be grouped without loss of efficiency. Therefore, the selection of an appropriate IM is crucial for the estimation of the vulnerability of structures and the assessment of seismic risk. Accordingly, the limitations of using acceleration as a physical quantity to represent seismic hazard are discussed in this study. The main one is related to the low causality with a measure of structural damage, such as the maximum inter-story drift ratio. Instead, IMs derived from the velocity spectrum are presented as a more efficient solution that can improve seismic risk estimates. Notwithstanding, the lack of ground motion prediction equations to define the attenuation of these IMs can be a limitation. This paper proposes to address this issue by analysing the resulting copula between a probabilistic set of spectral acceleration and velocity values. Then, based on the classical pseudo-spectral transformation, it has been proposed a correction oriented to improve the similarity between spectral and pseudo-spectral velocity values. Records acquired around Europe have been employed to do so. These findings can significantly contribute to decision making in the planning and design of earthquake resistant structures., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Influence of the non-linear dynamic response of soils in the prediction of seismic risk

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Zapata Franco, Ana Maria
One of the key elements in characterizing the seismic response of civil structures is the local effect. It is because the expected ground motion acting on the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. This response depends mainly on the parameters of the soil beneath the structure and the characteristics of the ground motion acting at depth, where nonlinear effects are negligible. Accordingly, enhanced mathematical arrangements to predict the nonlinear response of complex multi-degree-of-freedom systems can be developed if considering the dynamic properties of the soil and the main features of the ground motions acting at the bedrock. In this article has been analysed the probabilistic nonlinear response of steel buildings by considering the energy dissipation of the soil profile due to the pass of seismic waves. To do so, it has been used a recently proposed computational framework for assessing seismic risk, which is able to consider these interactions via Monte Carlo simulation. For this purpose, random soil profiles have been generated to obtain a representative sample of probable scenarios affecting the study area. Then, the ability of intensity measures (IM) to predict the dynamic response in the linear and nonlinear regimes of the structures have been assessed via Multi-regression analysis. Scalar-based and vector-valued IMs considering not only features of the ground motion at the bedrock level but also from the soil profile and the buildings have been analysed. Results have been processed by considering the number of stories of the buildings. It is observed that if the regression analysis is performed by considering the entire set of structures, the efficiency tends to decrease. Notwithstanding, there are some specific arrangements exhibiting high-efficiency in spite of the aggrupation., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Concrete-filled cold-formed chord studs to improve the seismic performance of steel framing buildings

  • Navarro Granados, Jordi
  • Bové Tous, Oriol
  • Casafont Ribera, Miguel
  • Bonada Bo, Jordi
  • López Almansa, Francisco
Light gauge steel framing is increasingly used, mainly for low-rise buildings. However, for mid-rise buildings, their lateral strength is rather low; therefore, seismic effects can be highly demanding. Steel bracing has been proposed for such buildings, but the chord studs are severely overloaded, thus limiting the building seismic performance (European codes state that, for a ductile behavior, the chord studs need to withstand the maximum force that can be transmitted by the braces). In some cases, steel-only solutions might be insufficient; this paper investigates the use of concretefilled cold-formed built-up sections for the chord studs. Three 5, 7 and 10-story prototype buildings located in seismic areas (PGA 0.2, 0.3 and 0.4 g) are analyzed. A previous study showed that steel-only solutions are only feasible in some cases: 5 and 7-story buildings for PGA 0.2 and 0.3 g, and 10-story building for only 0.2 g. On the contrary, by using concrete-filled built-up sections in the chord studs of the bottom and mid-height levels, in all the cases all the design requirements have been satisfactorily fulfilled., The first author PhD is funded by the Generalitat de Catalunya (Catalonian Government). grant No. 2020 DI 089. This research has been also funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) project PID2020-117374RB-I00 /AEI/10.13039/501100011033. These supports are gratefully acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evidences of directional soil response comportment

  • Lucas Rojas, Luis José
  • Caselles Magallón, Josep Oriol
  • Salinas Naval, Víctor
  • Pérez Gracia, María de la Vega
  • Clapés Boixader, Jaime
In recent years, the importance of considering other peaks than the predominant in the soil response has been revendicated. One possible explanation for some of these secondary peaks in the soil response is the presence of strong lateral variations in the geology of the area. Specifically, the existence of paleochannels and streams in the city of Barcelona has been associated with the appearance of some of these double peaks. This work stems from the idea that it is reasonable that a linear structure such as a paleochannel or stream produces a directionality in the response of the site and therefore the directional peak does only affect the structures in this specific direction. On the other hand, the peak produced by the half-space outside the stream may also present a certain degree of directionality that influences the behavior of the structures. To study this possible phenomenon, we have chosen an area close to the border between Barcelona and L'Hospitalet de Llobregat, and, analyzed 11 ambient noise Horizontal to Vertical Spectral Ratio (HVSR) soil response measurements of 40 minutes length and applying circular statistics to the results. The results show clear indications of this directional behavior of the response peaks., This work has been partially supported by the European Regional Development Fund (FEDER), the Government of Spain (Ministry of Science and Innovation) and the European Union, through the reference projects EFA158/16/POCRISC and PID2020117374RB-I00/ AEI/10.13039/501100011033, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Scaling ground motion records by considering the inelastic response of soils

  • Vargas Alzate, Yeudy Felipe
  • Zapata Franco, Ana Maria
  • Tirado Gutiérrez, Rodolfo Javier
  • González Drigo, José Ramón
  • Vaunat, Jean
One of the main shortcomings of several seismic databases is the lack of ground motion records exhibiting high-intensity values. Consequently, when characterizing seismic risk, or in the design process of a civil infrastructure, it is generally necessary to scale up a significant amount of low-intensity records so that the nonlinear response of the analyzed system can be fully explored. However, this type of records does not reflect neither the stiffness degradation nor the increasing of damping in soils affected by high-intensity ground motions. This paper presents an innovative approach for scaling seismic records by taking into account both effects. To do so, the equivalent linear method has been employed in an iterative manner to scale up and get records meeting these important conditions. A database from Colombia containing almost two thousand ground motion records has been used to characterize the seismic hazard. Results show that low-amplitude records scaled following the presented approach exhibit an increase of intensities at certain periods, which is consistent with the one observed in actual high-intensity ground motion records. In addition, the inelastic response of the soil tends to modify the expected risk, showing that scaling using constant values can produce biased results. It has been observed after comparing fragility functions derived for records scaled using a single scalar vs those considering the inelastic response of the soil., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multimode pushover analysis of unbraced racking systems

  • Golla, Vinod Kumar
  • Oliver Saiz, Maria Elena
  • Bové Tous, Oriol
  • Bonada Bo, Jordi
  • López Almansa, Francisco
Pushover analysis (incremental nonlinear static analysis) of structures has become increasingly popular due to its simplicity, being able to reproduce with reasonable precision the complex nonlinear dynamic behavior of buildings and other constructions undergoing several levels of strong seismic excitation. In order to gain more accuracy, several improvements to pushover have been proposed; among them, the so-called Modal Pushover Analysis consists in determining the structural response for several modes and combining them (commonly, quadratically). This approach has been mainly considered for tall buildings, as the influence of the higher modes can be significant. However, it might be also relevant for high-rise unbraced racking systems vibrating in their longitudinal (down-aisle) direction; conversely, so far only single-mode pushover analyses have been used for these structures. This paper aims to clarify this subject by assessing the relevance of the higher modes contribution. An unbraced representative prototype adjustable pallet racking system has been designed, according to European regulations, for a high seismicity region (PGA 0.4 g) and rigid soil. Only light goods have been considered, as heavy products most probably would require bracing. Modal pushover analysis of the prototype rack has been performed using a model implemented in Ansys; most of whose parameters are determined from available tests (both monotonic and cyclic). The rack down-aisle static behavior is described with a 2-D model that accounts for in-plane eccentricities and the connections nonlinear behavior (beam and floor-to-upright), as well as the geometric non-linearities (second-order)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Corrosion assessment of reinforced concrete structures using ground-penetrating radar

  • Solla, Mercedes
  • Pérez Gracia, María de la Vega
  • Fontul, Simona
Corrosion affecting reinforced concrete structures is a critical concern in civil engineering in terms of structural integrity, especially in critical infrastructure, safety risks to users, and long-term durability and safe operation over time, as well as for environmental impact and financial implications. Within this context, early detection of corrosion in reinforced concrete structures is crucial for time intervention, enabling preventive maintenance and anticipating future deterioration. This work proposes the GroundPenetrating Radar (GPR) as a recognized method for assessing corrosion in concrete structures. First, an overview of the effects of corrosion on the GPR signal, and how it can be detectable from the GPR data, is presented. Next, two different case studies are addressed, including the evaluation of a precast bridge deck in Galicia, and the unique structures of the UNESCO World Heritage Site of Park Güell in Barcelona. New trends on the development of robots to improve accessibility and autonomous data collection are also commented, as well as the use of artificial intelligence for automatic corrosion detection and the possibilities for data digitization into interoperable Building Information Modelling (BIM) and digital twin environments. Finally, it should be highlighted that identifying corrosion at an early stage allows engineers to take proactive measures to prolong the lifespan and serviceability of structures., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation of the dynamic seismic response of buildings through transfer functions: a probabilistic approach

  • Tirado Gutiérrez, Rodolfo Javier
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Zapata Franco, Ana Maria
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom system. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a simplified methodology to obtain a probabilistic and reliable estimate of the seismic response of buildings. To do so, a set of transfer functions associated to the dynamic response of a building model are obtained. Then, an optimal transfer function is identified as the one maximizing the prediction of engineering demand parameters (EDPs) when the structure is subjected to a large set of ground motions records. Results show that using a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of material-performance relationship, as well as in the estimation of the expected risk., Postprint (published version)