Pasar al contenido principal

RECURSOS MULTIDISCIPLINARES PARA EL DIAGNOSTICO SISMICO. MICROZONACION Y DAÑO.

PID2020-117374RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of the GPR signal for moisture detection: application to heritage buildings

  • Pérez Gracia, Vega
  • Solla Carracelas, Maria Mercedes
  • Fontul, Simona
Moisture is one of the main causes of degradation of heritage buildings. Early detection of zones affected by moisture is crucial information for preservation and maintenance of those structures. Ground-penetrating radar (GPR) is an effective survey method to assess damage in civil engineering and structures. Several methodologies involving this technique have been applied to determine the extension of damping in concrete, stone, and brick structures. This article summarizes the different signal analysis techniques generally used to detect moisture from GPR data. Four different case studies are included, covering different types of buildings. The case studies include the description of the problem, the results, the methodology (data acquisition, survey parameters, and processing), and the limits and advantages. Comparing the different studies, the limitations and advantages are associated with each type of problem and a final discussion describes other non-destructive testing techniques, numerical simulations and methodologies that could provide more reliable understanding when combined with GPR data., Xunta de Galicia | Ref. ED431F 2021/08, Agencia Estatal de Investigación | Ref. PID2020-117374RB-I00, Agencia Estatal de Investigación | Ref. RYC2019-026604-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Combining GPR, passive seismic, and load testing with computational models in the assessment of historical bridges: the case study of the Comboa Bridge

  • Pérez Gracia, Vega
  • Solla Carracelas, Maria Mercedes
  • Fontul, Simona
  • Caselles, Oriol
  • Balado Frías, Jesús
  • Alva, Rodrigo
  • Rodríguez Somoza, Juan Luis
  • González Drigo, Ramón
The preservation of historical bridges usually requires extensive structural evaluations for possible damage detection. Therefore, effective techniques are essential for diagnosis and, consequently, proper maintenance and rehabilitation actions. The combination of techniques provides complementary data that support decision making. A complete assessment was applied in the study of the Comboa Bridge, a medieval masonry structure in river Verdugo, in Galicia (Spain). It has three irregular arches, and the first visual inspection denotes the existence of important cracking and vegetation in the stonework. One of the most representative nondestructive testing (NDT) techniques for in situ evaluation is ground‐penetrating radar (GPR) that offers detailed insights into subsurface conditions, revealing information about materials, voids, and deterioration, while loading tests and passive seismic methods provide dynamic responses that are related to type of structure and possible damage. This method was combined with loading tests to obtain deflections of the bridge deck and passive seismic for analyzing the dynamic behavior. Moreover, 3D models of the structure were set up using light detection and ranging (LiDAR), performed with terrestrial laser scanning, and unmanned aerial vehicle (UAV) surveying. By combining 3D models with NDT techniques, the results provide comprehensive information that enhances the understanding of a bridge’s condition and safety. These results are used for calibrating the dynamic computational model of the structure in order to obtain the vibration modes. Each technique used in the study presents limitations, which are addressed and discussed herein. Furthermore, the site conditions can also affect the results, as the effectiveness of these methods can vary greatly, depending on the materials and structures, which influences the electromagnetic and mechanical wave propagation. Additionally, the frequency of the waves may not effectively mark all relevant structural features or smaller damage. When used together, the NDT methods can complement each other’s strengths, but challenges remain. Overall, while these techniques are valuable tools for assessing historical bridges, awareness of their limitations is crucial for accurate interpretation and effective decision making in preservation efforts. The results obtained in the Comboa Bridge demonstrate improved accuracy in identifying structural anomalies. Additionally, recommendations to overcome some of these challenges in case of historical bridge assessment and also for the continuous monitoring and adequate maintenance actions to preserve the bridge integrity and safety are presented., Xunta de Galicia | Ref. ED431F 2021/08, Agencia Estatal de Investigación | Ref. RYC2019-026604-I, Agencia Estatal de Investigación | Ref. TED2021-130183BI00, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Agencia Estatal de Investigación | Ref. PID2020-117374RB-I00, Generalitat de Catalunya | Ref. SGR 2021 01060
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evidences of directional soil response comportment

  • Lucas Rojas, Luis José
  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Salinas Naval, Víctor
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Clapés Boixader, Jaime|||0000-0001-5070-8662
In recent years, the importance of considering other peaks than the predominant in the soil response has been revendicated. One possible explanation for some of these secondary peaks in the soil response is the presence of strong lateral variations in the geology of the area. Specifically, the existence of paleochannels and streams in the city of Barcelona has been associated with the appearance of some of these double peaks. This work stems from the idea that it is reasonable that a linear structure such as a paleochannel or stream produces a directionality in the response of the site and therefore the directional peak does only affect the structures in this specific direction. On the other hand, the peak produced by the half-space outside the stream may also present a certain degree of directionality that influences the behavior of the structures. To study this possible phenomenon, we have chosen an area close to the border between Barcelona and L'Hospitalet de Llobregat, and, analyzed 11 ambient noise Horizontal to Vertical Spectral Ratio (HVSR) soil response measurements of 40 minutes length and applying circular statistics to the results. The results show clear indications of this directional behavior of the response peaks., This work has been partially supported by the European Regional Development Fund (FEDER), the Government of Spain (Ministry of Science and Innovation) and the European Union, through the reference projects EFA158/16/POCRISC and PID2020117374RB-I00/ AEI/10.13039/501100011033
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of damage-induced variations in the fundamental period of a framed steel scale structure

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • Luzi, Guido
  • Palamá, Riccardo
A five-story steel lab-scale structure is analyzed to explore variations of the fundamental period with damage. Five non-null damage states are simulated. Time series, power spectral density and damping are analyzed. Contact-less measurements and urban scenarios are also performed. A 0.38 s period dominates and variations of 5% and 60% were obtained for damage grades D1 and D5. Damping increased with increasing damage. Radar contactless measurements provided consistent results. The period scenario for a district of Barcelona showed soil-building resonant effects., This work has been partially supported by The European Regional Development Fund (ERDF), The Government of Spain (Ministry of Science and Innovation) and The European Union, through the reference projects [EFA158/16/POCRISC] and [PID2020117374RB-I00/AEI/10.13039/501100011033] and by the Government of Catalonia through project [SGR 2021 01060].
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estimation of the dynamic seismic response of buildings through transfer functions: a probabilistic approach

  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom system. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a simplified methodology to obtain a probabilistic and reliable estimate of the seismic response of buildings. To do so, a set of transfer functions associated to the dynamic response of a building model are obtained. Then, an optimal transfer function is identified as the one maximizing the prediction of engineering demand parameters (EDPs) when the structure is subjected to a large set of ground motions records. Results show that using a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of material-performance relationship, as well as in the estimation of the expected risk.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Average response of single degree of freedom systems for estimating the nonlinear response of structures

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • González Drigo, José Ramón|||0000-0003-2808-670X
The development of efficient proxies that allow approximating the nonlinear dynamic response of buildings is a paramount step in estimating seismic risk. Classical methodologies have been oriented to analyse the causal relationship between intensity measures (IM) and engineering demand parameters (EDP) extracted from nonlinear models. In this research, it has been proposed an innovative procedure for estimating this nonlinear behaviour by using the average response of a set of single-degree-of-freedom (SDoF) systems. This approach allows capturing the time-history response of a complex structure with less computational effort though high efficiency. In order to prove this, it has been estimated the maximum global drift ratio, MGDR, of more than one-thousand multi-degree of freedom systems representing Reinforced Concrete structures, whose number of stories vary from 3 to 13, by using nonlinear dynamic analysis, NLDA. Then, it has been calculated the MGDR by using both the time history response of a unique SDoF, with the fundamental period of the structure, and the average response of several oscillators, as proposed in this research. After employing cloud analysis, it has been observed that the MGDR, calculated using NLDA, is better approximated by using the average response of several SDoFs than a single SDoF. Similar conclusions can be drawn if analysing the nonlinear dynamic response of more than one-thousand steel frame structures, whose number of stories vary from 3 to 20., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with references: PID2020-117374RBI00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Concrete-filled cold-formed chord studs to improve the seismic performance of steel framing buildings

  • Navarro Granados, Jordi
  • Bové Tous, Oriol|||0000-0003-0006-0620
  • Casafont Ribera, Miguel|||0000-0001-6167-9465
  • Bonada Bo, Jordi|||0000-0002-4495-2295
  • López Almansa, Francisco|||0000-0002-7359-110X
Light gauge steel framing is increasingly used, mainly for low-rise buildings. However, for mid-rise buildings, their lateral strength is rather low; therefore, seismic effects can be highly demanding. Steel bracing has been proposed for such buildings, but the chord studs are severely overloaded, thus limiting the building seismic performance (European codes state that, for a ductile behavior, the chord studs need to withstand the maximum force that can be transmitted by the braces). In some cases, steel-only solutions might be insufficient; this paper investigates the use of concretefilled cold-formed built-up sections for the chord studs. Three 5, 7 and 10-story prototype buildings located in seismic areas (PGA 0.2, 0.3 and 0.4 g) are analyzed. A previous study showed that steel-only solutions are only feasible in some cases: 5 and 7-story buildings for PGA 0.2 and 0.3 g, and 10-story building for only 0.2 g. On the contrary, by using concrete-filled built-up sections in the chord studs of the bottom and mid-height levels, in all the cases all the design requirements have been satisfactorily fulfilled., The first author PhD is funded by the Generalitat de Catalunya (Catalonian Government). grant No. 2020 DI 089. This research has been also funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) project PID2020-117374RB-I00 /AEI/10.13039/501100011033. These supports are gratefully acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OMA of a School Building Damaged by the Illapel Earth-quake (Chile 2015)

  • Reyes, Juan Patricio
  • Valdebenito, Galo
  • Oliver Saiz, Maria Elena|||0000-0002-7693-0170
  • López Almansa, Francisco|||0000-0002-7359-110X
The Illapel earthquake struck Chile in 2015, causing fatalities, wounded, missing, and many people left homeless. It also damaged buildings, particularly school buildings. This research refers to the “San Rafael de Rozas” school, located in Illapel (Chile). It was visited after the event, and a simplified OMA (Operational Modal Analysis) of the damaged building was performed; it is required to estimate the modal parameters (mainly, natural periods) of the damaged building. This three-story building was built in 2003 and has an L-plan configuration. The structure consists of RC columns, beams, and slabs; in general, the construction quality was bad. The non-structural components significantly influenced the seismic behavior, chiefly the masonry infill walls. Noticeably, most of them are incomplete (i.e., leave a free space in the top, mainly for lighting); this leads to short columns, which are harmful to the building's seismic capacity. Accordingly, the damage was mainly concentrated in the short columns. For the abovementioned OMA, triaxial acceleration and velocity-sensitive seismographs were installed on the floors of the 3 stories; each measurement lasted 6 minutes at a sampling frequency of 512 Hz., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033; the field trip was funded by the Universidad Austral de Chile (Natural and Anthropogenic Risk Research Center, RINA and the Vice-rectory of Research, Development and Art). These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Ávila Haro, Jorge Arturo|||0000-0002-7437-8773
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Spectral-velocity-based intensity measures: a new proposal to improve seismic risk assessment

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
The probabilistic characterization of the seismic hazard at a site is evolving from the concept of the 'Uniform Hazard Spectrum' (UHS) to the 'Uniform Risk Spectrum' (URS). The latter ensures that structures in different regions have the same probability of collapse in the face of potential earthquakes, regardless of the level of seismic hazard. One of the main inputs to the development of a URS is a collapse fragility function. This function should be representative of a large set of building typologies. However, it can have a large dispersion when derived from an intensity measure (IM) with low steadfastness. This statistical property allows the results of the dynamic response of several types of structures to be grouped without loss of efficiency. Therefore, the selection of an appropriate IM is crucial for the estimation of the vulnerability of structures and the assessment of seismic risk. Accordingly, the limitations of using acceleration as a physical quantity to represent seismic hazard are discussed in this study. The main one is related to the low causality with a measure of structural damage, such as the maximum inter-story drift ratio. Instead, IMs derived from the velocity spectrum are presented as a more efficient solution that can improve seismic risk estimates. Notwithstanding, the lack of ground motion prediction equations to define the attenuation of these IMs can be a limitation. This paper proposes to address this issue by analysing the resulting copula between a probabilistic set of spectral acceleration and velocity values. Then, based on the classical pseudo-spectral transformation, it has been proposed a correction oriented to improve the similarity between spectral and pseudo-spectral velocity values. Records acquired around Europe have been employed to do so. These findings can significantly contribute to decision making in the planning and design of earthquake resistant structures., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of the GPR signal for moisture detection: application to heritage buildings

  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Solla Carracelas, Mercedes
  • Fontul, Simona
Moisture is one of the main causes of degradation of heritage buildings. Early detection of zones affected by moisture is crucial information for preservation and maintenance of those structures. Ground-penetrating radar (GPR) is an effective survey method to assess damage in civil engineering and structures. Several methodologies involving this technique have been applied to determine the extension of damping in concrete, stone, and brick structures. This article summarizes the different signal analysis techniques generally used to detect moisture from GPR data. Four different case studies are included, covering different types of buildings. The case studies include the description of the problem, the results, the methodology (data acquisition, survey parameters, and processing), and the limits and advantages. Comparing the different studies, the limitations and advantages are associated with each type of problem and a final discussion describes other non-destructive testing techniques, numerical simulations and methodologies that could provide more reliable understanding when combined with GPR data., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Scaling ground motion records by considering the inelastic response of soils

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Vaunat, Jean|||0000-0003-3579-9652
One of the main shortcomings of several seismic databases is the lack of ground motion records exhibiting high-intensity values. Consequently, when characterizing seismic risk, or in the design process of a civil infrastructure, it is generally necessary to scale up a significant amount of low-intensity records so that the nonlinear response of the analyzed system can be fully explored. However, this type of records does not reflect neither the stiffness degradation nor the increasing of damping in soils affected by high-intensity ground motions. This paper presents an innovative approach for scaling seismic records by taking into account both effects. To do so, the equivalent linear method has been employed in an iterative manner to scale up and get records meeting these important conditions. A database from Colombia containing almost two thousand ground motion records has been used to characterize the seismic hazard. Results show that low-amplitude records scaled following the presented approach exhibit an increase of intensities at certain periods, which is consistent with the one observed in actual high-intensity ground motion records. In addition, the inelastic response of the soil tends to modify the expected risk, showing that scaling using constant values can produce biased results. It has been observed after comparing fragility functions derived for records scaled using a single scalar vs those considering the inelastic response of the soil., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Customary light-gauge steel framing construction with flat strap bracing. Seismicity limits for short to mid-rise buildings in Europe

  • Navarro Granados, Jordi
  • Casafont Ribera, Miguel|||0000-0001-6167-9465
  • Bové Tous, Oriol|||0000-0003-0006-0620
  • Bonada Bo, Jordi|||0000-0002-4495-2295
  • López Almansa, Francisco|||0000-0002-7359-110X
Ordinary (customary) light gauge steel framing is a convenient construction technology; however, given the studs low axial capacity, it has been considered mainly for low-rise buildings in low seismicity regions. This paper investigates the boundaries of application of this type of steel framing (in moderate and high seismicity areas) by designing the structures of three representative 5, 7 and 10-storey buildings in order to examine their feasibility. The necessity of using built-up columns consisting of two or more sections is investigated. The axial capacity of studs is estimated by code-type analyses. The critical buckling stress is determined with well-known closed-form expressions; as they do not contemplate the flexibility of the screwed connections (in built-up sections), the obtained results are complemented with those of the finite strip method and generalized beam theory formulations., The PhD of the first author is funded by the Generalitat de Catalunya (Catalonian Government), Grant No. 2020 DI 089. This research has been also partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. These supports are gratefully acknowledged. The author J. Bonada is a Serra Húnter Fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low lateral stiffness underground structures for improved seismic performance: application to the Kobe Daikai station

  • Bu, Xiangbo
  • Ledesma Villalba, Alberto|||0000-0003-3321-3849
  • López Almansa, Francisco|||0000-0002-7359-110X
Underground cut-and-cover structures are commonly designed as rigid box sections; however, in practical applications, connections between walls and slabs are frequently rather hinged (because of ease of construction). The abovementioned rigid configurations are highly sensitive to seismic ground motions, due to their important lateral stiffness and internal hyperstaticity; conversely, structures with articulated (or sliding) members have a smaller lateral stiffness, and would be significantly less affected by seismic waves, as would simply accommodate the imposed strains. This flexible solution has been widely considered in practice, but has received little attention from the academic community; this paper tries to close this gap by investigating preliminarily the seismic performance of box-section underground structures with hinged or sliding members. The well-known Daikai Station, damaged by the 1995 Kobe earthquake is analyzed in this paper as a highly relevant case study. An alternative solution is proposed for that station; both simplified and precise calculations have been performed. The simplified calculations are linear static analyses of the station-soil system; the soil-structure interaction is represented by a simple classical model. The precise calculations are nonlinear time-history analyses of an integrated finite element model of the station and the surrounding soil. Both types of analyses refer to the traditional and the proposed solutions of the station. The results of the static and dynamic analyses are satisfactorily compared; they prove that the proposed flexible solution is fully feasible and provides better seismic performance. Finally, another paper by the same authors presented a supplementary case study on a 2-story 3-bay subway station; the outcomes of these two studies could contribute to ground this constructive solution for shallow underground rectangular cut-and-cover structures in seismic areas (both for new construction and retrofit). Noticeably, this approach can be utilized for both cast-in-place and precast structures., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033. The study of Mr. Xiangbo Bu in the Technical University of Catalonia (UPC-BarcelonaTech) is funded by Chinese Government Scholarship (CSC No. 201906560013). These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cumulative ductility and fatigue life of Buckling-Restrained Braces under severe seismic loading conditions: an experimental study

  • Guerrero Bobadilla, Héctor
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • Velasco Enríquez, Luis Iván
  • Terán Gilmore, Amador
  • Arroyo Espinoza, Danny
  • Vargas Ortiz, Javer Humberto
  • Tapia Hernández, Edgar
Buckling-Restrained Braces (BRBs) are globally recognized for their ability to enhance the seismic performance of structures due to their stable cyclic behavior. However, concerns regarding their long-term stability under cumulative cyclic loads over a structure’s lifespan remain. This study addresses these concerns by subjecting six identical BRB specimens to quasi-static cyclic loading tests, with three tested under a standard incremental amplitude protocol and three under severe seismic deformation demands, all tested to failure under fatigue conditions. The results demonstrate that BRBs maintain stable hysteretic behavior up to peak ductilities of 13.9 and endure between 5 and 15 repetitions of seismic load protocols, with energy dissipation capacities far exceeding design basis earthquake demands. Detailed data on stiffness, load resistance, and overstrength factors in both tension and compression are provided, challenging the view of BRBs as sacrificial elements. Instead, the findings highlight their reliability and durability, suggesting they can provide robust seismic resistance throughout a structure’s service life. By advancing our understanding of BRBs’ long-term performance, this study underscores their critical role in enhancing structural resilience and emphasizes the need for further research to fully explore their potential in seismic design, ensuring more durable and resilient infrastructure., The study was partially sponsored by ISC-CDMX, Mexico, through the agreement: ISCDF/CEC-04/2022-17. The second author was supported by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The third and sixth authors gratefully acknowledge the scholarship provided by CONAHCyT, Mexico for supporting their postgraduate studies. The experiments were conducted at CENAPRED, Mexico , whose support is highly appreciated. Additionally, the tested BRBs were generously donated by Dampo, Mexico. All authors have read and approved the final manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic fragility and damage models for framed-RC buidlings. Application to Barcelona, Spain

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • Gonzalez-Drigo, Ramon
A great number (1160) of framed-reinforced-concrete buildings, which are typical of residential buildings in many European and worldwide countries, have been modelled in a probabilistic way. Main geometric and strength properties have been defined by means of adequate probability distributions. Geometric features are sampled according uniform distributions, while strength properties are assumed to have normal distributions. Thus, for instance, concerning to geometry, numbers of frames and numbers of floors are considered in the ranges [3 - 6] and [3 - 13], and the height of the floors and the width of the frames are defined in the ranges [2.8-3.2] m and [4 - 6] m. Distribution types and corresponding parameters have been defined according to available information and data. An improved parametric model matching actual capacity spectra, is proposed. This way, capacity spectra, that have been developed for each individual building, are fully defined by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau) and µ (mu) and s (sigma) parameters, defining a lognormal function. New insights on the meaning and easy computation of µ (mu) and s (sigma) are provided: µ (mu) is directly related to ductility, while s (sigma) controls the way the strength of the building degrades. Afterwards, fragility and damage curves are obtained, and damage probability matrices are developed for a selected hazard-earthquake scenario. A district of the city of Barcelona, Spain, is used as a testbed. One of the advantages of the procedure is that it allows to adopt previous buildings’ classes as the typical low-rise, mid-rise and high-rise buildings’ categories but, also other groups preferred. Another advantage of the model is that, once the target earthquake has been selected, let’s say according to, for instance, its return period, damage scenarios, such as those ones with a predefined exceedance probability, let’s say, 50% or 95% exceedance probability, can be depicted on demand. Moreover, these probabilistic risk scenarios may be very useful for stakeholders in order to take ad-hoc proper measures for emergency planning and for earthquake prevention and protection., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reduced order models to estimate seismic risk of unreinforced masonry dwellings

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Gonzalez-Drigo, Ramon
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
In order to estimate seismic risk at an urban level it is necessary to consider several sources of uncertainty. However, the higher the uncertainties related to both structural modelling and seismic hazard, the higher the computational time to extract reliable information to assess seismic risk. Thus, simplifying the structural model significantly diminishes the computational effort, allowing analyzing several building models in a fraction of time. In this sense, one of the most simplified representations to approximate the horizontal dynamic response of a structure is the Single Degree of Freedom system (SDoF). It allows calculating time-history responses in an easy way, given a determined fundamental period and damping. Though, the response of an SDoF does not consider neither the stiffness’ loss because of plastic damage nor the participation of higher modes. Advanced intensity measures (IMs) look for addressing these shortcomings by averaging spectral quantities around the fundamental period (T1) of the analyzed building. Analogous to this approach, it is proposed to estimate the dynamic response of a building by averaging the time history response of a set of SDoF systems with periods in the interval (0.1T1, 1.8T1). The dynamic response associated with each of them has been estimated by means of the dynamic equilibrium equation for SDoF systems. In order to verify the efficiency of the proposed approach, it has been analyzed the dynamic behavior of unconfined masonry. This structural type is very prone to damage during an earthquake, as it has poor seismic performance. Observed damage and consequences of a catastrophic event occurred in Colombia (1999) have been used to verify the methodological approach, This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Corrosion assessment of reinforced concrete structures using ground-penetrating radar

  • Solla, Mercedes
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Fontul, Simona
Corrosion affecting reinforced concrete structures is a critical concern in civil engineering in terms of structural integrity, especially in critical infrastructure, safety risks to users, and long-term durability and safe operation over time, as well as for environmental impact and financial implications. Within this context, early detection of corrosion in reinforced concrete structures is crucial for time intervention, enabling preventive maintenance and anticipating future deterioration. This work proposes the GroundPenetrating Radar (GPR) as a recognized method for assessing corrosion in concrete structures. First, an overview of the effects of corrosion on the GPR signal, and how it can be detectable from the GPR data, is presented. Next, two different case studies are addressed, including the evaluation of a precast bridge deck in Galicia, and the unique structures of the UNESCO World Heritage Site of Park Güell in Barcelona. New trends on the development of robots to improve accessibility and autonomous data collection are also commented, as well as the use of artificial intelligence for automatic corrosion detection and the possibilities for data digitization into interoperable Building Information Modelling (BIM) and digital twin environments. Finally, it should be highlighted that identifying corrosion at an early stage allows engineers to take proactive measures to prolong the lifespan and serviceability of structures.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Guía para la evaluación de la vulnerabilidad de edificios esenciales (E4.2.1)

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
En esta comunicación se resume una guía para la evaluación de la vulnerabilidad sísmica de edificios esenciales, elaborada en el marco del proyecto EFA158/16/POCRISC. La guía incluye los antecedentes, los métodos de primer nivel (LM1), el método de segundo nivel (LM2), y el método de nivel avanzado (LMa), que se basa en el análisis dinámico. En el LM1, la acción se define por la intensidad macrosísmica y el edificio mediante índices de vulnerabilidad. En el LM2, la acción se define por el espectro de respuesta y el edificio por su espectro de capacidad y, en el LMa, la acción se define mediante acelerogramas y el edificio mediante modelos estructurales. Para un escenario específico los métodos permiten conocer las probabilidades de que se excedan determinados niveles o estados de daño en función de la severidad de la acción. La guía también aborda aspectos relacionados con la vulnerabilidad funcional y con la fragilidad social, cultural y económica.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robotics and GPR in Agriculture, Robòtica i georadar en agricultura, Robótica y radar de penetración terrestre en agricultura

  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Caballero Flores, David|||0000-0003-2809-1760
  • Rodríguez Calderón, Nuria|||0009-0006-0399-7362
  • Liso, Adriano
  • Sanchez Atienza, Marc
  • Domènech Mestres, Carles|||0000-0002-6058-0110
Ground Penetrating Radar (GPR) has become a valuable tool in precision agriculture for subsurface analysis. This work presents the adaptation of GPR to an autonomous robot that is being designed for agricultural tasks, capable of mapping the terrain using both Lidar and Computer Vision (CV) technologies. The integration of these systems will allow the robot to navigate autonomously while collecting data for mapping the surface and subsurface of the soil. The study focuses on the use of GPR data detect changes in the water content, enabling the robot to create detailed moisture maps of the shallow subsurface, providing insights into soil hydration levels. An additional objective is to enable the data collected by the robot to generate root maps, essential for understanding root growth and distribution. To achieve this, the aim is to determine the most effective method for detecting roots using GPR. The initial results of the project highlight the potential of autonomous robots equipped with GPR for optimizing agricultural practices, enhancing efficiency in field analysis and improving decision-making processes., This research was partially supported by the projects GroPeRBot (56-30147-2021-5A) of the Department of Climate Action, Food, and Rural Agenda of the Government of Catalonia, with additional funding from EAFRD (European Agricultural Fund for Rural Development), and ROOTBOT (ACC-2023- EXP-SIA001-13-0000101) of the Department of Agriculture, Livestock, Fisheries, and Food of the Government of Catalonia, co-financed with EAFRD funds. This research was also partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The authors would also like to thank Agrotech for their support and for allowing us to use the experimental fields at Agropolis for conducting tests and trials with the equipment and the robot.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Probabilistic parametric analysis of capacity, fragility and expected seismic damage of framed reinforced concrete buildings

  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
1160 framed reinforced concrete buildings, holding 3–13 stories, have been modelled in a probabilistic way. Capacity spectra have been calculated and characterized by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau), µ and s. µ is related to ductility, and s controls the way the building strength degrades. A strong correlation among these five parameters has been found. Moreover, the also high correlation between the initial stiffness and the number of stories allows to define median and percentile capacity spectra starting from the number of stories. Afterwards, for each number of stories, a fragility analysis is performed for the median capacity spectrum. The Barcelona city, in Spain, is used to depict the expected physical damage for a probabilistic and a deterministic seismic hazard scenario. Two procedures, based on the bilinear form of the capacity spectrum and on the Park and Ang damage index, are used to define damage states thresholds. The probabilistic scenario is more damaging than the deterministic one is and, damage states thresholds based on the capacity spectrum lead to more damages than the ones based on the Park and Ang damage index. Mean damage states close to 2.0 are obtained, being 25% and 6% the probabilities of Severe, and Complete, damage states, which would have significant impact on the number of homeless people and victims. Maps of expected damages depict the physical seismic risk of the probabilistic scenario. These scenarios are very useful for emergency planning and for earthquake protection., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Probabilistic seismic assessment of a representative existing educational building in the city of Moquegua (Peru)

  • Salas Chávez, Miguel Armando|||0000-0002-8482-7704
  • Cabrera Vélez, Esteban M.
  • González Drigo, José Ramón|||0000-0003-2808-670X
The earthquake of 23 June 2001, Mw 8.4, caused catastrophic damage in the city of Moquegua (Peru), especially in reinforced-concrete educational buildings. In this research, advanced procedures have been used and compared to assess the seismic performance of a new educational building designed under the current Peruvian construction regulations. Two nonlinear static procedures, the capacity spectrum method and an improved procedure based on the equivalent linearization method, have been applied and compared. Damage probabilities for a 475-year-return-period earthquake for the city of Moquegua evidence that the improved procedure based on the equivalent linearization method turns out to be slightly more conservative than the capacity spectrum method. Incremental dynamic analyses, based on 15 seismic events selected according to specific criteria, are taken as reference and complete the building damage assessment. Probabilistic damage matrices are proposed to assess damage using a probabilistic approach, which makes it possible to determine the levels of risk to be assumed in likely post-seismic scenarios and to carry out probabilistic estimates of the impacted population, the expected damage to structures, and the ranges of economic (social and material) costs. These tools assist stakeholders, civil protection and fire departments and the administrations involved in risk management and contingency planning in developing prevention strategies and improving preparedness for natural disasters such as earthquakes., his research has been partially developed thanks to funding from the 2021 competitive Research Project of the Universidad Católica San Pablo project with reference P-13-CPI-2021; by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project reference PID2020-117374RB-I00/AEI/10.13039/501100011033; by the Generalitat of Catalonia through project SGR 2021 01060 and by the Instituto de Estudios de Régimen Seccional del Ecuador (IERSE) of the Universidad del Azuay (UDA) through projects with references 2025-0150 and 2024-0141.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improved intensity measures considering soil inelastic properties via multi-regression analysis

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • González Drigo, José Ramón|||0000-0003-2808-670X
At certain depths, the elastic properties of the ground are not affected by seismic waves. However, as they reach the surface, the soil density decreases and so does its elastic limit. This means that the expected ground motion acting at the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. Therefore, one of the key elements in characterizing the seismic response of civil structures is the site effect. These depend mainly on the parameters of the soil beneath the structure and the features of the ground motion acting at the depth, where non-linear effects are negligible. Therefore, the main objective of this paper is to find an intensity measure that incorporates the information provided by the soil profile under the structure and the ground motion acting at the bedrock level. Due to the random nature of both elements, a probabilistic framework using Monte Carlo simulation has been developed to analyze this problem. For this purpose, random soil profiles have been generated to obtain a representative sample of likely scenarios of the study area. A large database of Colombian ground motion records has been used to model the seismic hazard. Finally, power functions capable of relating the input variables to the dynamic response of a large set of reinforced concrete structures have been derived by considering multi-regression analysis. It has been observed that, in several cases, intensity measures extracted from the displacement spectrum appear in the mathematical arrangements. These functions could be used to improve the efficiency of seismic risk prediction at the urban level., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED 2021-132559B-I00—J-02970., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical analysis of the axial-flexural behavior of CFST columns with active transverse prestressing

  • Hu, Xiao
  • Albareda Valls, Albert|||0000-0002-2178-476X
  • Bu, Xiangbo
  • López Almansa, Francisco|||0000-0002-7359-110X
This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress achieved by bolting together two steel half-tubes. Twelve prototype CFST column specimens differing in the prestressing force (three levels) and in the gravity loading ratio (four levels) are analyzed; they are selected to represent typical ground columns of mid-rise buildings. Their structural behavior is simulated with a nonlinear model implemented in Abaqus; concrete and steel behavior are described with a damage-plasticity and a plasticity model, respectively. The concrete-steel interaction is represented by a hard (compression-only) surface-to-surface contact model. The calculations involve three consecutive loading steps: (i) transverse prestress, (ii) axial force, and (iii) lateral loading (shear force and bending moment). The calculation results show that the axial-flexural capacity of the prototype CFST columns is adequate. However, the hoop prestress benefit on axial compressive performance is not outstanding because the tube transverse Poisson expansion impairs the concrete confinement. The benefit in the flexural performance is smaller, due to the lack of sectional lateral expansion during bending. Preliminary studies on mid-rise buildings equipped with the prototype CFST columns show that their gravity and wind capacities are largely enough; conversely, their seismic strength is sufficient only for moderate earthquakes., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The stay of Prof. Xiao Hu in Barcelona was funded by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection of China (Grant No. SKLGP2020K010). The study of Mr. Xiangbo Bu in the Technical University of Catalonia (UPC-BarcelonaTech) is funded by the Chinese Government Scholarship (CSC No. 201906560013). These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multimode pushover analysis of unbraced racking systems

  • Golla, Vinod Kumar
  • Oliver Saiz, Maria Elena|||0000-0002-7693-0170
  • Bové Tous, Oriol|||0000-0003-0006-0620
  • Bonada Bo, Jordi|||0000-0002-4495-2295
  • López Almansa, Francisco|||0000-0002-7359-110X
Pushover analysis (incremental nonlinear static analysis) of structures has become increasingly popular due to its simplicity, being able to reproduce with reasonable precision the complex nonlinear dynamic behavior of buildings and other constructions undergoing several levels of strong seismic excitation. In order to gain more accuracy, several improvements to pushover have been proposed; among them, the so-called Modal Pushover Analysis consists in determining the structural response for several modes and combining them (commonly, quadratically). This approach has been mainly considered for tall buildings, as the influence of the higher modes can be significant. However, it might be also relevant for high-rise unbraced racking systems vibrating in their longitudinal (down-aisle) direction; conversely, so far only single-mode pushover analyses have been used for these structures. This paper aims to clarify this subject by assessing the relevance of the higher modes contribution. An unbraced representative prototype adjustable pallet racking system has been designed, according to European regulations, for a high seismicity region (PGA 0.4 g) and rigid soil. Only light goods have been considered, as heavy products most probably would require bracing. Modal pushover analysis of the prototype rack has been performed using a model implemented in Ansys; most of whose parameters are determined from available tests (both monotonic and cyclic). The rack down-aisle static behavior is described with a 2-D model that accounts for in-plane eccentricities and the connections nonlinear behavior (beam and floor-to-upright), as well as the geometric non-linearities (second-order).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimators for structural damage detection using principal component analysis

  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Martín Balet, Alejo
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Clapés Boixader, Jaime|||0000-0001-5070-8662
Structural damage detection is an important issue in conservation. In this research, principal component analysis (PCA) has been applied to the temporal variation of modal frequencies obtained from a dynamic test of a scaled steel structure subjected to different damages and different temperatures. PCA has been applied in order to reduce, as much as possible, the number of variables involved in the problem of structural damage detection. The aim of the PCA study is to determine the minimum number of principal components necessary to explain all the modal frequency variation. Three estimators have been studied: T2 (the square of the vector norm of the projection in the principal component plan), Q (the square of the norm of the residual vector), and the variance explained. In the study, the results related to the undamaged structure needed one principal component to explain the modal frequency variation. However, the high damage configurations need five principal components to explain the modal frequency. The T2 and Q estimators have been arranged in order of increasing damage for all the performed experimental tests. The results indicate that these estimators could be useful to detect damage and to distinguish among a range of intensities of structural damage., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Probabilistic estimation of the dynamic response of high-rise buildings via transfer functions

  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction for employing advanced nonlinear dynamic methods. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom systems. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a methodology to achieve a probabilistic and reliable estimation of the seismic response of buildings by tackling the computational effort. To do so, a set of transfer functions extracted from the dynamic response of three building models have been obtained. Then, an optimal transfer function per building is identified as the one maximizing the prediction of engineering demand parameters (EDPs), when each structure is subjected to a large set of ground motions records. Results show that the response of a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of the material-performance ratio, as well as in the estimation of expected seismic risk., We thank the companies "MUISCA Construcciones" and "Constructora Triple A", as well as the engineer Mario A. Silva and the architects Augusto Acuña and Carlos García, for having allowed the use of the monitoring results of the studied buildings. This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Influence of the non-linear dynamic response of soils in the prediction of seismic risk

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
One of the key elements in characterizing the seismic response of civil structures is the local effect. It is because the expected ground motion acting on the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. This response depends mainly on the parameters of the soil beneath the structure and the characteristics of the ground motion acting at depth, where nonlinear effects are negligible. Accordingly, enhanced mathematical arrangements to predict the nonlinear response of complex multi-degree-of-freedom systems can be developed if considering the dynamic properties of the soil and the main features of the ground motions acting at the bedrock. In this article has been analysed the probabilistic nonlinear response of steel buildings by considering the energy dissipation of the soil profile due to the pass of seismic waves. To do so, it has been used a recently proposed computational framework for assessing seismic risk, which is able to consider these interactions via Monte Carlo simulation. For this purpose, random soil profiles have been generated to obtain a representative sample of probable scenarios affecting the study area. Then, the ability of intensity measures (IM) to predict the dynamic response in the linear and nonlinear regimes of the structures have been assessed via Multi-regression analysis. Scalar-based and vector-valued IMs considering not only features of the ground motion at the bedrock level but also from the soil profile and the buildings have been analysed. Results have been processed by considering the number of stories of the buildings. It is observed that if the regression analysis is performed by considering the entire set of structures, the efficiency tends to decrease. Notwithstanding, there are some specific arrangements exhibiting high-efficiency in spite of the aggrupation., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Average response of single degree of freedom systems for estimating the nonlinear response of structures

  • Vargas Alzate, Yeudy Felipe
  • Zapata Franco, Ana Maria
  • González Drigo, José Ramón
The development of efficient proxies that allow approximating the nonlinear dynamic response of buildings is a paramount step in estimating seismic risk. Classical methodologies have been oriented to analyse the causal relationship between intensity measures (IM) and engineering demand parameters (EDP) extracted from nonlinear models. In this research, it has been proposed an innovative procedure for estimating this nonlinear behaviour by using the average response of a set of single-degree-of-freedom (SDoF) systems. This approach allows capturing the time-history response of a complex structure with less computational effort though high efficiency. In order to prove this, it has been estimated the maximum global drift ratio, MGDR, of more than one-thousand multi-degree of freedom systems representing Reinforced Concrete structures, whose number of stories vary from 3 to 13, by using nonlinear dynamic analysis, NLDA. Then, it has been calculated the MGDR by using both the time history response of a unique SDoF, with the fundamental period of the structure, and the average response of several oscillators, as proposed in this research. After employing cloud analysis, it has been observed that the MGDR, calculated using NLDA, is better approximated by using the average response of several SDoFs than a single SDoF. Similar conclusions can be drawn if analysing the nonlinear dynamic response of more than one-thousand steel frame structures, whose number of stories vary from 3 to 20., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with references: PID2020-117374RBI00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OMA of a School Building Damaged by the Illapel Earth-quake (Chile 2015)

  • Reyes, Juan Patricio
  • Valdebenito, Galo
  • Oliver Saiz, Maria Elena
  • López Almansa, Francisco
The Illapel earthquake struck Chile in 2015, causing fatalities, wounded, missing, and many people left homeless. It also damaged buildings, particularly school buildings. This research refers to the “San Rafael de Rozas” school, located in Illapel (Chile). It was visited after the event, and a simplified OMA (Operational Modal Analysis) of the damaged building was performed; it is required to estimate the modal parameters (mainly, natural periods) of the damaged building. This three-story building was built in 2003 and has an L-plan configuration. The structure consists of RC columns, beams, and slabs; in general, the construction quality was bad. The non-structural components significantly influenced the seismic behavior, chiefly the masonry infill walls. Noticeably, most of them are incomplete (i.e., leave a free space in the top, mainly for lighting); this leads to short columns, which are harmful to the building's seismic capacity. Accordingly, the damage was mainly concentrated in the short columns. For the abovementioned OMA, triaxial acceleration and velocity-sensitive seismographs were installed on the floors of the 3 stories; each measurement lasted 6 minutes at a sampling frequency of 512 Hz., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033; the field trip was funded by the Universidad Austral de Chile (Natural and Anthropogenic Risk Research Center, RINA and the Vice-rectory of Research, Development and Art). These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probabilistic parametric analysis of capacity, fragility and expected seismic damage of framed reinforced concrete buildings

  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • González Drigo, José Ramón
1160 framed reinforced concrete buildings, holding 3–13 stories, have been modelled in a probabilistic way. Capacity spectra have been calculated and characterized by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau), µ and s. µ is related to ductility, and s controls the way the building strength degrades. A strong correlation among these five parameters has been found. Moreover, the also high correlation between the initial stiffness and the number of stories allows to define median and percentile capacity spectra starting from the number of stories. Afterwards, for each number of stories, a fragility analysis is performed for the median capacity spectrum. The Barcelona city, in Spain, is used to depict the expected physical damage for a probabilistic and a deterministic seismic hazard scenario. Two procedures, based on the bilinear form of the capacity spectrum and on the Park and Ang damage index, are used to define damage states thresholds. The probabilistic scenario is more damaging than the deterministic one is and, damage states thresholds based on the capacity spectrum lead to more damages than the ones based on the Park and Ang damage index. Mean damage states close to 2.0 are obtained, being 25% and 6% the probabilities of Severe, and Complete, damage states, which would have significant impact on the number of homeless people and victims. Maps of expected damages depict the physical seismic risk of the probabilistic scenario. These scenarios are very useful for emergency planning and for earthquake protection., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improved intensity measures considering soil inelastic properties via multi-regression analysis

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
At certain depths, the elastic properties of the ground are not affected by seismic waves. However, as they reach the surface, the soil density decreases and so does its elastic limit. This means that the expected ground motion acting at the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. Therefore, one of the key elements in characterizing the seismic response of civil structures is the site effect. These depend mainly on the parameters of the soil beneath the structure and the features of the ground motion acting at the depth, where non-linear effects are negligible. Therefore, the main objective of this paper is to find an intensity measure that incorporates the information provided by the soil profile under the structure and the ground motion acting at the bedrock level. Due to the random nature of both elements, a probabilistic framework using Monte Carlo simulation has been developed to analyze this problem. For this purpose, random soil profiles have been generated to obtain a representative sample of likely scenarios of the study area. A large database of Colombian ground motion records has been used to model the seismic hazard. Finally, power functions capable of relating the input variables to the dynamic response of a large set of reinforced concrete structures have been derived by considering multi-regression analysis. It has been observed that, in several cases, intensity measures extracted from the displacement spectrum appear in the mathematical arrangements. These functions could be used to improve the efficiency of seismic risk prediction at the urban level., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED 2021-132559B-I00—J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cumulative ductility and fatigue life of Buckling-Restrained Braces under severe seismic loading conditions: an experimental study

  • Guerrero Bobadilla, Héctor
  • Alva Bañuelos, Rodrigo Esteban
  • Velasco Enríquez, Luis Iván
  • Terán Gilmore, Amador
  • Arroyo Espinoza, Danny
  • Vargas Ortiz, Javer Humberto
  • Tapia Hernández, Edgar
Buckling-Restrained Braces (BRBs) are globally recognized for their ability to enhance the seismic performance of structures due to their stable cyclic behavior. However, concerns regarding their long-term stability under cumulative cyclic loads over a structure’s lifespan remain. This study addresses these concerns by subjecting six identical BRB specimens to quasi-static cyclic loading tests, with three tested under a standard incremental amplitude protocol and three under severe seismic deformation demands, all tested to failure under fatigue conditions. The results demonstrate that BRBs maintain stable hysteretic behavior up to peak ductilities of 13.9 and endure between 5 and 15 repetitions of seismic load protocols, with energy dissipation capacities far exceeding design basis earthquake demands. Detailed data on stiffness, load resistance, and overstrength factors in both tension and compression are provided, challenging the view of BRBs as sacrificial elements. Instead, the findings highlight their reliability and durability, suggesting they can provide robust seismic resistance throughout a structure’s service life. By advancing our understanding of BRBs’ long-term performance, this study underscores their critical role in enhancing structural resilience and emphasizes the need for further research to fully explore their potential in seismic design, ensuring more durable and resilient infrastructure., The study was partially sponsored by ISC-CDMX, Mexico, through the agreement: ISCDF/CEC-04/2022-17. The second author was supported by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The third and sixth authors gratefully acknowledge the scholarship provided by CONAHCyT, Mexico for supporting their postgraduate studies. The experiments were conducted at CENAPRED, Mexico , whose support is highly appreciated. Additionally, the tested BRBs were generously donated by Dampo, Mexico. All authors have read and approved the final manuscript., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reduced order models to estimate seismic risk of unreinforced masonry dwellings

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
  • Gonzalez-Drigo, Ramon
  • Tirado Gutiérrez, Rodolfo Javier
In order to estimate seismic risk at an urban level it is necessary to consider several sources of uncertainty. However, the higher the uncertainties related to both structural modelling and seismic hazard, the higher the computational time to extract reliable information to assess seismic risk. Thus, simplifying the structural model significantly diminishes the computational effort, allowing analyzing several building models in a fraction of time. In this sense, one of the most simplified representations to approximate the horizontal dynamic response of a structure is the Single Degree of Freedom system (SDoF). It allows calculating time-history responses in an easy way, given a determined fundamental period and damping. Though, the response of an SDoF does not consider neither the stiffness’ loss because of plastic damage nor the participation of higher modes. Advanced intensity measures (IMs) look for addressing these shortcomings by averaging spectral quantities around the fundamental period (T1) of the analyzed building. Analogous to this approach, it is proposed to estimate the dynamic response of a building by averaging the time history response of a set of SDoF systems with periods in the interval (0.1T1, 1.8T1). The dynamic response associated with each of them has been estimated by means of the dynamic equilibrium equation for SDoF systems. In order to verify the efficiency of the proposed approach, it has been analyzed the dynamic behavior of unconfined masonry. This structural type is very prone to damage during an earthquake, as it has poor seismic performance. Observed damage and consequences of a catastrophic event occurred in Colombia (1999) have been used to verify the methodological approach, This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic fragility and damage models for framed-RC buidlings. Application to Barcelona, Spain

  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • Gonzalez-Drigo, Ramon
A great number (1160) of framed-reinforced-concrete buildings, which are typical of residential buildings in many European and worldwide countries, have been modelled in a probabilistic way. Main geometric and strength properties have been defined by means of adequate probability distributions. Geometric features are sampled according uniform distributions, while strength properties are assumed to have normal distributions. Thus, for instance, concerning to geometry, numbers of frames and numbers of floors are considered in the ranges [3 - 6] and [3 - 13], and the height of the floors and the width of the frames are defined in the ranges [2.8-3.2] m and [4 - 6] m. Distribution types and corresponding parameters have been defined according to available information and data. An improved parametric model matching actual capacity spectra, is proposed. This way, capacity spectra, that have been developed for each individual building, are fully defined by means of 5 parameters: initial stiffness, ultimate capacity (Sdu, Sau) and µ (mu) and s (sigma) parameters, defining a lognormal function. New insights on the meaning and easy computation of µ (mu) and s (sigma) are provided: µ (mu) is directly related to ductility, while s (sigma) controls the way the strength of the building degrades. Afterwards, fragility and damage curves are obtained, and damage probability matrices are developed for a selected hazard-earthquake scenario. A district of the city of Barcelona, Spain, is used as a testbed. One of the advantages of the procedure is that it allows to adopt previous buildings’ classes as the typical low-rise, mid-rise and high-rise buildings’ categories but, also other groups preferred. Another advantage of the model is that, once the target earthquake has been selected, let’s say according to, for instance, its return period, damage scenarios, such as those ones with a predefined exceedance probability, let’s say, 50% or 95% exceedance probability, can be depicted on demand. Moreover, these probabilistic risk scenarios may be very useful for stakeholders in order to take ad-hoc proper measures for emergency planning and for earthquake prevention and protection., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Customary light-gauge steel framing construction with flat strap bracing. Seismicity limits for short to mid-rise buildings in Europe

  • Navarro Granados, Jordi
  • Casafont Ribera, Miguel
  • Bové Tous, Oriol
  • Bonada Bo, Jordi
  • López Almansa, Francisco
Ordinary (customary) light gauge steel framing is a convenient construction technology; however, given the studs low axial capacity, it has been considered mainly for low-rise buildings in low seismicity regions. This paper investigates the boundaries of application of this type of steel framing (in moderate and high seismicity areas) by designing the structures of three representative 5, 7 and 10-storey buildings in order to examine their feasibility. The necessity of using built-up columns consisting of two or more sections is investigated. The axial capacity of studs is estimated by code-type analyses. The critical buckling stress is determined with well-known closed-form expressions; as they do not contemplate the flexibility of the screwed connections (in built-up sections), the obtained results are complemented with those of the finite strip method and generalized beam theory formulations., The PhD of the first author is funded by the Generalitat de Catalunya (Catalonian Government), Grant No. 2020 DI 089. This research has been also partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. These supports are gratefully acknowledged. The author J. Bonada is a Serra Húnter Fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical analysis of the axial-flexural behavior of CFST columns with active transverse prestressing

  • Hu, Xiao
  • Albareda Valls, Albert
  • Bu, Xiangbo
  • López Almansa, Francisco
This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress achieved by bolting together two steel half-tubes. Twelve prototype CFST column specimens differing in the prestressing force (three levels) and in the gravity loading ratio (four levels) are analyzed; they are selected to represent typical ground columns of mid-rise buildings. Their structural behavior is simulated with a nonlinear model implemented in Abaqus; concrete and steel behavior are described with a damage-plasticity and a plasticity model, respectively. The concrete-steel interaction is represented by a hard (compression-only) surface-to-surface contact model. The calculations involve three consecutive loading steps: (i) transverse prestress, (ii) axial force, and (iii) lateral loading (shear force and bending moment). The calculation results show that the axial-flexural capacity of the prototype CFST columns is adequate. However, the hoop prestress benefit on axial compressive performance is not outstanding because the tube transverse Poisson expansion impairs the concrete confinement. The benefit in the flexural performance is smaller, due to the lack of sectional lateral expansion during bending. Preliminary studies on mid-rise buildings equipped with the prototype CFST columns show that their gravity and wind capacities are largely enough; conversely, their seismic strength is sufficient only for moderate earthquakes., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The stay of Prof. Xiao Hu in Barcelona was funded by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection of China (Grant No. SKLGP2020K010). The study of Mr. Xiangbo Bu in the Technical University of Catalonia (UPC-BarcelonaTech) is funded by the Chinese Government Scholarship (CSC No. 201906560013). These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probabilistic estimation of the dynamic response of high-rise buildings via transfer functions

  • Tirado Gutiérrez, Rodolfo Javier
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction for employing advanced nonlinear dynamic methods. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom systems. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a methodology to achieve a probabilistic and reliable estimation of the seismic response of buildings by tackling the computational effort. To do so, a set of transfer functions extracted from the dynamic response of three building models have been obtained. Then, an optimal transfer function per building is identified as the one maximizing the prediction of engineering demand parameters (EDPs), when each structure is subjected to a large set of ground motions records. Results show that the response of a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of the material-performance ratio, as well as in the estimation of expected seismic risk., We thank the companies "MUISCA Construcciones" and "Constructora Triple A", as well as the engineer Mario A. Silva and the architects Augusto Acuña and Carlos García, for having allowed the use of the monitoring results of the studied buildings. This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Guía para la evaluación de la vulnerabilidad de edificios esenciales (E4.2.1)

  • Pujades Beneit, Lluís
  • Lantada, Nieves
  • González Drigo, José Ramón
En esta comunicación se resume una guía para la evaluación de la vulnerabilidad sísmica de edificios esenciales, elaborada en el marco del proyecto EFA158/16/POCRISC. La guía incluye los antecedentes, los métodos de primer nivel (LM1), el método de segundo nivel (LM2), y el método de nivel avanzado (LMa), que se basa en el análisis dinámico. En el LM1, la acción se define por la intensidad macrosísmica y el edificio mediante índices de vulnerabilidad. En el LM2, la acción se define por el espectro de respuesta y el edificio por su espectro de capacidad y, en el LMa, la acción se define mediante acelerogramas y el edificio mediante modelos estructurales. Para un escenario específico los métodos permiten conocer las probabilidades de que se excedan determinados niveles o estados de daño en función de la severidad de la acción. La guía también aborda aspectos relacionados con la vulnerabilidad funcional y con la fragilidad social, cultural y económica., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Spectral-velocity-based intensity measures: a new proposal to improve seismic risk assessment

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Zapata Franco, Ana Maria
The probabilistic characterization of the seismic hazard at a site is evolving from the concept of the 'Uniform Hazard Spectrum' (UHS) to the 'Uniform Risk Spectrum' (URS). The latter ensures that structures in different regions have the same probability of collapse in the face of potential earthquakes, regardless of the level of seismic hazard. One of the main inputs to the development of a URS is a collapse fragility function. This function should be representative of a large set of building typologies. However, it can have a large dispersion when derived from an intensity measure (IM) with low steadfastness. This statistical property allows the results of the dynamic response of several types of structures to be grouped without loss of efficiency. Therefore, the selection of an appropriate IM is crucial for the estimation of the vulnerability of structures and the assessment of seismic risk. Accordingly, the limitations of using acceleration as a physical quantity to represent seismic hazard are discussed in this study. The main one is related to the low causality with a measure of structural damage, such as the maximum inter-story drift ratio. Instead, IMs derived from the velocity spectrum are presented as a more efficient solution that can improve seismic risk estimates. Notwithstanding, the lack of ground motion prediction equations to define the attenuation of these IMs can be a limitation. This paper proposes to address this issue by analysing the resulting copula between a probabilistic set of spectral acceleration and velocity values. Then, based on the classical pseudo-spectral transformation, it has been proposed a correction oriented to improve the similarity between spectral and pseudo-spectral velocity values. Records acquired around Europe have been employed to do so. These findings can significantly contribute to decision making in the planning and design of earthquake resistant structures., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of the GPR signal for moisture detection: application to heritage buildings

  • Pérez Gracia, María de la Vega
  • Solla Carracelas, Mercedes
  • Fontul, Simona
Moisture is one of the main causes of degradation of heritage buildings. Early detection of zones affected by moisture is crucial information for preservation and maintenance of those structures. Ground-penetrating radar (GPR) is an effective survey method to assess damage in civil engineering and structures. Several methodologies involving this technique have been applied to determine the extension of damping in concrete, stone, and brick structures. This article summarizes the different signal analysis techniques generally used to detect moisture from GPR data. Four different case studies are included, covering different types of buildings. The case studies include the description of the problem, the results, the methodology (data acquisition, survey parameters, and processing), and the limits and advantages. Comparing the different studies, the limitations and advantages are associated with each type of problem and a final discussion describes other non-destructive testing techniques, numerical simulations and methodologies that could provide more reliable understanding when combined with GPR data., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Influence of the non-linear dynamic response of soils in the prediction of seismic risk

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Zapata Franco, Ana Maria
One of the key elements in characterizing the seismic response of civil structures is the local effect. It is because the expected ground motion acting on the foundation of a structure cannot be adequately described without considering the inelastic response of the soil near the surface. This response depends mainly on the parameters of the soil beneath the structure and the characteristics of the ground motion acting at depth, where nonlinear effects are negligible. Accordingly, enhanced mathematical arrangements to predict the nonlinear response of complex multi-degree-of-freedom systems can be developed if considering the dynamic properties of the soil and the main features of the ground motions acting at the bedrock. In this article has been analysed the probabilistic nonlinear response of steel buildings by considering the energy dissipation of the soil profile due to the pass of seismic waves. To do so, it has been used a recently proposed computational framework for assessing seismic risk, which is able to consider these interactions via Monte Carlo simulation. For this purpose, random soil profiles have been generated to obtain a representative sample of probable scenarios affecting the study area. Then, the ability of intensity measures (IM) to predict the dynamic response in the linear and nonlinear regimes of the structures have been assessed via Multi-regression analysis. Scalar-based and vector-valued IMs considering not only features of the ground motion at the bedrock level but also from the soil profile and the buildings have been analysed. Results have been processed by considering the number of stories of the buildings. It is observed that if the regression analysis is performed by considering the entire set of structures, the efficiency tends to decrease. Notwithstanding, there are some specific arrangements exhibiting high-efficiency in spite of the aggrupation., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020-117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low lateral stiffness underground structures for improved seismic performance: application to the Kobe Daikai station

  • Bu, Xiangbo
  • Ledesma Villalba, Alberto
  • López Almansa, Francisco
Underground cut-and-cover structures are commonly designed as rigid box sections; however, in practical applications, connections between walls and slabs are frequently rather hinged (because of ease of construction). The abovementioned rigid configurations are highly sensitive to seismic ground motions, due to their important lateral stiffness and internal hyperstaticity; conversely, structures with articulated (or sliding) members have a smaller lateral stiffness, and would be significantly less affected by seismic waves, as would simply accommodate the imposed strains. This flexible solution has been widely considered in practice, but has received little attention from the academic community; this paper tries to close this gap by investigating preliminarily the seismic performance of box-section underground structures with hinged or sliding members. The well-known Daikai Station, damaged by the 1995 Kobe earthquake is analyzed in this paper as a highly relevant case study. An alternative solution is proposed for that station; both simplified and precise calculations have been performed. The simplified calculations are linear static analyses of the station-soil system; the soil-structure interaction is represented by a simple classical model. The precise calculations are nonlinear time-history analyses of an integrated finite element model of the station and the surrounding soil. Both types of analyses refer to the traditional and the proposed solutions of the station. The results of the static and dynamic analyses are satisfactorily compared; they prove that the proposed flexible solution is fully feasible and provides better seismic performance. Finally, another paper by the same authors presented a supplementary case study on a 2-story 3-bay subway station; the outcomes of these two studies could contribute to ground this constructive solution for shallow underground rectangular cut-and-cover structures in seismic areas (both for new construction and retrofit). Noticeably, this approach can be utilized for both cast-in-place and precast structures., This research has been partially funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00 / AEI / 10.13039/501100011033. The study of Mr. Xiangbo Bu in the Technical University of Catalonia (UPC-BarcelonaTech) is funded by Chinese Government Scholarship (CSC No. 201906560013). These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Concrete-filled cold-formed chord studs to improve the seismic performance of steel framing buildings

  • Navarro Granados, Jordi
  • Bové Tous, Oriol
  • Casafont Ribera, Miguel
  • Bonada Bo, Jordi
  • López Almansa, Francisco
Light gauge steel framing is increasingly used, mainly for low-rise buildings. However, for mid-rise buildings, their lateral strength is rather low; therefore, seismic effects can be highly demanding. Steel bracing has been proposed for such buildings, but the chord studs are severely overloaded, thus limiting the building seismic performance (European codes state that, for a ductile behavior, the chord studs need to withstand the maximum force that can be transmitted by the braces). In some cases, steel-only solutions might be insufficient; this paper investigates the use of concretefilled cold-formed built-up sections for the chord studs. Three 5, 7 and 10-story prototype buildings located in seismic areas (PGA 0.2, 0.3 and 0.4 g) are analyzed. A previous study showed that steel-only solutions are only feasible in some cases: 5 and 7-story buildings for PGA 0.2 and 0.3 g, and 10-story building for only 0.2 g. On the contrary, by using concrete-filled built-up sections in the chord studs of the bottom and mid-height levels, in all the cases all the design requirements have been satisfactorily fulfilled., The first author PhD is funded by the Generalitat de Catalunya (Catalonian Government). grant No. 2020 DI 089. This research has been also funded by the Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) project PID2020-117374RB-I00 /AEI/10.13039/501100011033. These supports are gratefully acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evidences of directional soil response comportment

  • Lucas Rojas, Luis José
  • Caselles Magallón, Josep Oriol
  • Salinas Naval, Víctor
  • Pérez Gracia, María de la Vega
  • Clapés Boixader, Jaime
In recent years, the importance of considering other peaks than the predominant in the soil response has been revendicated. One possible explanation for some of these secondary peaks in the soil response is the presence of strong lateral variations in the geology of the area. Specifically, the existence of paleochannels and streams in the city of Barcelona has been associated with the appearance of some of these double peaks. This work stems from the idea that it is reasonable that a linear structure such as a paleochannel or stream produces a directionality in the response of the site and therefore the directional peak does only affect the structures in this specific direction. On the other hand, the peak produced by the half-space outside the stream may also present a certain degree of directionality that influences the behavior of the structures. To study this possible phenomenon, we have chosen an area close to the border between Barcelona and L'Hospitalet de Llobregat, and, analyzed 11 ambient noise Horizontal to Vertical Spectral Ratio (HVSR) soil response measurements of 40 minutes length and applying circular statistics to the results. The results show clear indications of this directional behavior of the response peaks., This work has been partially supported by the European Regional Development Fund (FEDER), the Government of Spain (Ministry of Science and Innovation) and the European Union, through the reference projects EFA158/16/POCRISC and PID2020117374RB-I00/ AEI/10.13039/501100011033, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Estimators for structural damage detection using principal component analysis

  • Caselles Magallón, Josep Oriol
  • Martín Balet, Alejo
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Clapés Boixader, Jaime
Structural damage detection is an important issue in conservation. In this research, principal component analysis (PCA) has been applied to the temporal variation of modal frequencies obtained from a dynamic test of a scaled steel structure subjected to different damages and different temperatures. PCA has been applied in order to reduce, as much as possible, the number of variables involved in the problem of structural damage detection. The aim of the PCA study is to determine the minimum number of principal components necessary to explain all the modal frequency variation. Three estimators have been studied: T2 (the square of the vector norm of the projection in the principal component plan), Q (the square of the norm of the residual vector), and the variance explained. In the study, the results related to the undamaged structure needed one principal component to explain the modal frequency variation. However, the high damage configurations need five principal components to explain the modal frequency. The T2 and Q estimators have been arranged in order of increasing damage for all the performed experimental tests. The results indicate that these estimators could be useful to detect damage and to distinguish among a range of intensities of structural damage., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Scaling ground motion records by considering the inelastic response of soils

  • Vargas Alzate, Yeudy Felipe
  • Zapata Franco, Ana Maria
  • Tirado Gutiérrez, Rodolfo Javier
  • González Drigo, José Ramón
  • Vaunat, Jean
One of the main shortcomings of several seismic databases is the lack of ground motion records exhibiting high-intensity values. Consequently, when characterizing seismic risk, or in the design process of a civil infrastructure, it is generally necessary to scale up a significant amount of low-intensity records so that the nonlinear response of the analyzed system can be fully explored. However, this type of records does not reflect neither the stiffness degradation nor the increasing of damping in soils affected by high-intensity ground motions. This paper presents an innovative approach for scaling seismic records by taking into account both effects. To do so, the equivalent linear method has been employed in an iterative manner to scale up and get records meeting these important conditions. A database from Colombia containing almost two thousand ground motion records has been used to characterize the seismic hazard. Results show that low-amplitude records scaled following the presented approach exhibit an increase of intensities at certain periods, which is consistent with the one observed in actual high-intensity ground motion records. In addition, the inelastic response of the soil tends to modify the expected risk, showing that scaling using constant values can produce biased results. It has been observed after comparing fragility functions derived for records scaled using a single scalar vs those considering the inelastic response of the soil., This research has been funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through the projects with references: PID2020117374RB-I00/AEI/10.13039/501100011033 and TED2021-132559B-I00 – J-02970., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probabilistic seismic assessment of a representative existing educational building in the city of Moquegua (Peru)

  • Salas Chávez, Miguel Armando
  • Cabrera Vélez, Esteban M.
  • González Drigo, José Ramón
The earthquake of 23 June 2001, Mw 8.4, caused catastrophic damage in the city of Moquegua (Peru), especially in reinforced-concrete educational buildings. In this research, advanced procedures have been used and compared to assess the seismic performance of a new educational building designed under the current Peruvian construction regulations. Two nonlinear static procedures, the capacity spectrum method and an improved procedure based on the equivalent linearization method, have been applied and compared. Damage probabilities for a 475-year-return-period earthquake for the city of Moquegua evidence that the improved procedure based on the equivalent linearization method turns out to be slightly more conservative than the capacity spectrum method. Incremental dynamic analyses, based on 15 seismic events selected according to specific criteria, are taken as reference and complete the building damage assessment. Probabilistic damage matrices are proposed to assess damage using a probabilistic approach, which makes it possible to determine the levels of risk to be assumed in likely post-seismic scenarios and to carry out probabilistic estimates of the impacted population, the expected damage to structures, and the ranges of economic (social and material) costs. These tools assist stakeholders, civil protection and fire departments and the administrations involved in risk management and contingency planning in developing prevention strategies and improving preparedness for natural disasters such as earthquakes., his research has been partially developed thanks to funding from the 2021 competitive Research Project of the Universidad Católica San Pablo project with reference P-13-CPI-2021; by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project reference PID2020-117374RB-I00/AEI/10.13039/501100011033; by the Generalitat of Catalonia through project SGR 2021 01060 and by the Instituto de Estudios de Régimen Seccional del Ecuador (IERSE) of the Universidad del Azuay (UDA) through projects with references 2025-0150 and 2024-0141., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multimode pushover analysis of unbraced racking systems

  • Golla, Vinod Kumar
  • Oliver Saiz, Maria Elena
  • Bové Tous, Oriol
  • Bonada Bo, Jordi
  • López Almansa, Francisco
Pushover analysis (incremental nonlinear static analysis) of structures has become increasingly popular due to its simplicity, being able to reproduce with reasonable precision the complex nonlinear dynamic behavior of buildings and other constructions undergoing several levels of strong seismic excitation. In order to gain more accuracy, several improvements to pushover have been proposed; among them, the so-called Modal Pushover Analysis consists in determining the structural response for several modes and combining them (commonly, quadratically). This approach has been mainly considered for tall buildings, as the influence of the higher modes can be significant. However, it might be also relevant for high-rise unbraced racking systems vibrating in their longitudinal (down-aisle) direction; conversely, so far only single-mode pushover analyses have been used for these structures. This paper aims to clarify this subject by assessing the relevance of the higher modes contribution. An unbraced representative prototype adjustable pallet racking system has been designed, according to European regulations, for a high seismicity region (PGA 0.4 g) and rigid soil. Only light goods have been considered, as heavy products most probably would require bracing. Modal pushover analysis of the prototype rack has been performed using a model implemented in Ansys; most of whose parameters are determined from available tests (both monotonic and cyclic). The rack down-aisle static behavior is described with a 2-D model that accounts for in-plane eccentricities and the connections nonlinear behavior (beam and floor-to-upright), as well as the geometric non-linearities (second-order)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Corrosion assessment of reinforced concrete structures using ground-penetrating radar

  • Solla, Mercedes
  • Pérez Gracia, María de la Vega
  • Fontul, Simona
Corrosion affecting reinforced concrete structures is a critical concern in civil engineering in terms of structural integrity, especially in critical infrastructure, safety risks to users, and long-term durability and safe operation over time, as well as for environmental impact and financial implications. Within this context, early detection of corrosion in reinforced concrete structures is crucial for time intervention, enabling preventive maintenance and anticipating future deterioration. This work proposes the GroundPenetrating Radar (GPR) as a recognized method for assessing corrosion in concrete structures. First, an overview of the effects of corrosion on the GPR signal, and how it can be detectable from the GPR data, is presented. Next, two different case studies are addressed, including the evaluation of a precast bridge deck in Galicia, and the unique structures of the UNESCO World Heritage Site of Park Güell in Barcelona. New trends on the development of robots to improve accessibility and autonomous data collection are also commented, as well as the use of artificial intelligence for automatic corrosion detection and the possibilities for data digitization into interoperable Building Information Modelling (BIM) and digital twin environments. Finally, it should be highlighted that identifying corrosion at an early stage allows engineers to take proactive measures to prolong the lifespan and serviceability of structures., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of damage-induced variations in the fundamental period of a framed steel scale structure

  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
  • Caselles Magallón, Josep Oriol
  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • Luzi, Guido
  • Palamá, Riccardo
A five-story steel lab-scale structure is analyzed to explore variations of the fundamental period with damage. Five non-null damage states are simulated. Time series, power spectral density and damping are analyzed. Contact-less measurements and urban scenarios are also performed. A 0.38 s period dominates and variations of 5% and 60% were obtained for damage grades D1 and D5. Damping increased with increasing damage. Radar contactless measurements provided consistent results. The period scenario for a district of Barcelona showed soil-building resonant effects., This work has been partially supported by The European Regional Development Fund (ERDF), The Government of Spain (Ministry of Science and Innovation) and The European Union, through the reference projects [EFA158/16/POCRISC] and [PID2020117374RB-I00/AEI/10.13039/501100011033] and by the Government of Catalonia through project [SGR 2021 01060]., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation of the dynamic seismic response of buildings through transfer functions: a probabilistic approach

  • Tirado Gutiérrez, Rodolfo Javier
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Zapata Franco, Ana Maria
The significant number of seismic ground motion records to be considered when designing or assessing civil structures is a common restriction. This is because the large computational time involved in the calculation of the nonlinear dynamic response of complex multi-degree-of-freedom system. There are several strategies to overcome this limitation; however, the reliability estimation of the analyzed systems can be compromised. This research is focused on developing a simplified methodology to obtain a probabilistic and reliable estimate of the seismic response of buildings. To do so, a set of transfer functions associated to the dynamic response of a building model are obtained. Then, an optimal transfer function is identified as the one maximizing the prediction of engineering demand parameters (EDPs) when the structure is subjected to a large set of ground motions records. Results show that using a reduced number of records allows developing an enhanced strategy to obtain reliable results in terms of the main statistical moments of the EDPs. This increased capacity to analyze complex systems in an affordable time has important consequences in the identification of optimal designs in terms of material-performance relationship, as well as in the estimation of the expected risk., Postprint (published version)