Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the equal displacement aproximation for mid-rise reinforced concrete buildings

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
The equal displacement approximation is a well-known procedure for estimating the non-linear behavior of structures subjected to earthquake ground motions. This procedure plays a significant role in current seismic design, since it constitutes the basic assumption for defining strength reduction factors. In this paper, calculation of the performance point based on this rule is used to estimate engineering demand parameters such as those obtained by advanced probabilistic non-linear dynamic analysis, NLDA. We present a modification to the classic approach, to improve the predictability of the equal displacement rule. Uncertainties in seismic action and structural properties are considered. Mid-rise reinforced concrete buildings will be used as a testbed. To obtain a representative sample of buildings for statistical analysis, we describe the development through implementation of a numerical tool for calculating probabilistic NLDA. This tool, which is expected to evolve into interoperable software for assessing the seismic risk of structures, is developed within the framework of the KaIROS project. The results presented in this paper could be used to estimate the seismic risk of structures in a very simplified manner.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seismic intensity measures based on energy and spectral velocity., Mesures de l'intensité sismique basées sur l'énergie et la vitesse spectrale., Misure dell'intensità sismica basate sull'energia e sulla velocità spettrale., Medidas de intensidad sísmica basadas en la energía y la velocidad espectral.

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
This study analysed the statistical relationship between parameters representing the intensity of earthquake-induced ground movements (Intensity Measures, IM) and the non-linear dynamic response of buildings (Engineering Demand Parameters, EDP). To this end, the time-history response of a probabilistic set of 3D models simulating the behaviour of reinforced concrete buildings was calculated using Nonlinear Dynamic Analysis. This yielded IM-EDP point clouds that were used to quantify the efficiency and statistical sufficiency of the IM. It has been observed that IMs based on energy and spectral velocity are excellent predictors of EDPs, at least for those related to the deformation field of the structure. Finally, depending on the azimuthal orientation of the models with respect to the epicentre of the earthquake, subsets of results have been classified and statistically analysed. The objective has been to present new evidence on the dependence between seismic fragility and the angle of incidence of incoming waves. The results presented in this work serve to reduce uncertainties in predictions of the seismic response of civil structures, which would increase reliability in design and vulnerability estimates at the regional scale., Yeudy F. Vargas-Alzate recibió una beca individual en el programa de becas de investigación de las Acciones Marie Sklodowska-Curie, Unión Europea (H2020-MSCA-IF-2017) No 799553. Este autor está profundamente agradecido a esta institución. Esta investigación también ha sido parcialmente financiada por el Fondo Europeo de Desarrollo Regional (FEDER) y el Gobierno de España (Ministerio de Ciencia e Innovación) a través de los proyectos de investigación EFA158/16/POCRISC y PID2020117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Remote ambient vibration measurements with real aperture radar to estimate buildings dynamic properties

  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Luzi, Guido
  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
The use of sensors to obtain the dynamic properties of structures by means of ambient vibrations has become a common practice. However, conventional and more extensively used methods require the installation of sensors, which should be in contact with the structure. These methods could be even risky in case of structures weakened by a hazardous event, for which the risk of collapse is unknown. In this study, two main subjects are analyzed and discussed. The former is related to the use of the Real-Aperture Radar (RAR) as a non-invasive, remote sensing interferometric method to measure the vibration response to ambient noise of buildings. As a test bed, two high-rise regular buildings with reinforced concrete frames (8-story) and steel frames (12-story), located in Barcelona, Spain, are analyzed. Notice that the RAR device is a sensor using the principle of interferometry to measure displacements. This type of sensors has exhibited a good performance in urban environments at different atmospheric, meteorological and lighting conditions, compared to other types of remote sensors (e.g. Laser Doppler). Another advantage is that RAR devices have a very good resolution and they can operate at great distances from the object to be measured. However, so far, RAR is rarely used in buildings, being still a poorly studied technique. The latter subject is related to the optimal post-processing of the acquired data. At this respect, the Power Spectral Density (PSD) signal-processing technique is used to process the signals acquired. From this analysis, the predominant periods of the analyzed buildings were obtained and then they were compared with those periods obtained from measurements of accelerometers located inside the structures. The results indicate that the use of RAR can be a reliable alternative to estimate the structural periods in a relatively simple and non-invasive manner.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Ávila Haro, Jorge Arturo|||0000-0002-7437-8773
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

New insights into the relationship between seismic intensity measures and nonlinear structural response

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hurtado Gómez, Jorge Eduardo
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
This paper focuses on the probabilistic analysis of Intensity Measures (IMs) and Engineering Demand Parameters (EDPs) in the context of earthquake-induced ground motions. Several statistical properties, which are desirable in IMs when they are used to predict EDPs, have been analysed. Specifically, efficiency, sufficiency and steadfastness have been quantified for a set of IMs with respect to two EDPs: the maximum inter-storey drift ratio, MIDR, and the maximum floor acceleration, MFA. Steadfastness is a new statistical property proposed in this article, which is related to the ability of IMs to forecast EDPs for large building suites. In other words, this means that efficiency does not significantly vary when different types of buildings are simultanously considered in the statistical analyses. This property allows reducing the number of calculations when performing seismic risk estimations at urban level since, for instance, a large variety of fragility curves, representing specific building typologies, can be grouped together within a more generic one. The main sources of uncertainty involved in the calculation of the seismic risk have been considered in the analysis. To do so, the nonlinear dynamic responses of probabilistic multi-degree-of-freedom building models, subjected to a large data set of ground motion records, have been calculated. These models have been generated to simulate the dynamic behavior of reinforced concrete buildings whose number of stories vary from 3 to 13. 18 spectrum-, energy- and direct-accelerogram-based IMs have been considered herein. Then, from clouds of IM-EDP points, efficiency, sufficiency and steadfastness have been quantified. For MIDR, results show that IMs based on spectral velocity are more efficient and steadfast than the ones based on spectral acceleration; spectral velocity averaged in a range of periods, AvSv, has shown to be the most efficient IM with an adequate level of steadfastness. For MFA, spectral acceleration-based-IMs are more efficient than velocity-based ones. A comparison is also presented on the use of linear vs quadratic regression models, and their implications on the derivation of fragility functions. Concerning sufficiency, most of the 18 IMs analysed do not have this property. Nonetheless, multi-regression models have been employed to address this lack of sufficiency allowing to obtain a so-called ‘ideal’ IM., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. H2020 Marie Skłodowska-Curie Actions, 799553, Yeudy Felipe Vargas-Alzate., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Spectral velocity-and energy-based intensity measures

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Ávila Haro, Jorge Arturo|||0000-0002-7437-8773
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Tirado Gutiérrez, Rodolfo Javier|||0009-0004-6342-5767
The statistical relationship between parameters that represent the intensity of ground motions induced by earthquakes (Intensity Measures, IM) and the nonlinear response of buildings (Engineering Demand Parameters, EDP) has been analyzed In this paper. To do so, the time-history response of a set of probabilistic 3D models, which simulate the dynamic behavior of Reinforced Concrete buildings, has been calculated via Non-Linear Dynamic Analysis. In this way, clouds of IM-EDP points are obtained and used to quantify efficiency and sufficiency. It has been observed that spectral velocity- and energy-based IMs are excellent proxies for EDPs; at least for those related to the deformation field of the structure. Finally, according to the epicenter location and azimuthal orientation of the models, subsets of results have been classified and statistically analyzed. The objective has been to present new evidence on the dependency between seismic fragility and the incidence angle of the incoming waves., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship in the research grant program of the Marie Sklodowska-Curie Actions, European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. This research has also been partially funded by the European Regional development Fund (ERDF) and the Spanish Government (Ministry of Science and Innovation) through the research projects EFA158/16/POCRISC and PID2020117374RB-I00 /AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simulation and analysis of damage progression in a mid-rise RC building during and earthquake

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • Ávila Haro, Jorge Arturo|||0000-0002-7437-8773
A five-story reinforced concrete building severely damaged during the Mw 5.1, May 11th 2011, Lorca earthquake (Murcia, Spain), has been monitored with an interferometric radar and has been numerically modelled with the aim to study the evolution of the structural damage. An initial non-damaged and a final damaged configuration of the building after the earthquake have been modelled first. Radar measurements helped to calibrate the models. Four intermediate models, with damage configurations representing four steps of cumulative damage of the building facing the earthquake, have been built based on the information related to the building seismic damage included in a technical report. The objectives were to obtain calibrated numerical models, to perform a modal analysis, to calculate the capacity curve, and to study the evolution of the natural periods and the strength capacity of the building within each damage configuration representing the incremental damage process. Results show that a growth of 20% in the values of natural periods and reductions of 50% in the capacity lead the building over the severe damage state threshold. The interferometric radar is a suitable remote sensing technique to identify, in a rapid screening, the natural periods of mid and tall damaged buildings., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU). Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program at UPC-Barcelona-Tech. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grants program of the Marie Sklodowska-Curie Actions (MSCA) of the European Union/European (H2020-MSCA-IF-2017) No 799553.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A simplified approach for including the incidence angle effect in seismic risk assessment

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Silva, Vitor
  • Vamvatsikos, Dimitrios
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
A simplified procedure is developed to consider the azimuthal orientation of buildings when estimating seismic risk. Two square-plan reinforced concrete building models are considered as a testbed, one with similar and one with dissimilar properties along the two principal horizontal axes. The fragility of both structures is analysed using a set of ground motion records rotated to multiple incidence angles to develop orientation-dependent fragility functions. It has been observed that, re-orienting all records so that these structures have the same azimuth vis-à-vis the corresponding epicentre leads to significant differences compared to assuming random orientations. Additional results stemming from single-degree-of-freedom oscillators further confirm such findings, showing a dependence to the proximity to the faults and the level of dissimilarity in the principal horizontal axes of the structure. The end results point to a non-negligible bias in assessment studies when a structure's orientation with respect to governing rupture scenarios is not taken into account. It is shown that the median of fragility curves calculated for un-rotated incidence angles can be bias-corrected through shifted by an amount that depends on the azimuthal orientation and level of axes-dissimilarity of structures., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficiency of intensity measures considering near- and far-fault ground motion records

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hurtado Gómez, Jorge Eduardo
This paper focuses on the identification of high-efficiency intensity measures to predict the seismic response of buildings affected by near- and far-fault ground motion records. Near-fault ground motion has received special attention, as it tends to increase the expected damage to civil structures compared to that from ruptures originating further afield. In order to verify this tendency, the nonlinear dynamic response of 3D multi-degree-of-freedom models is estimated by using a subset of records whose distance to the epicenter is lower than 10 km. In addition, to quantify how much the expected demand may increase because of the proximity to the fault, another subset of records, whose distance to the epicenter is in the range between 10 and 30 km, has been analyzed. Then, spectral and energy-based intensity measures as well as those obtained from specific computations of the ground motion record are calculated and correlated to several engineering demand parameters. From these analyses, fragility curves are derived and compared for both subsets of records. It has been observed that the subset of records nearer to the fault tends to produce fragility functions with higher probabilities of exceedance than the ones derived for far-fault records. Results also show that the efficiency of the intensity measures is similar for both subsets of records, but it varies depending on the engineering demand parameter to be predicted., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the equal displacement aproximation for mid-rise reinforced concrete buildings

  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
  • Alva Bañuelos, Rodrigo Esteban
  • Pinzón Ureña, Luis
The equal displacement approximation is a well-known procedure for estimating the non-linear behavior of structures subjected to earthquake ground motions. This procedure plays a significant role in current seismic design, since it constitutes the basic assumption for defining strength reduction factors. In this paper, calculation of the performance point based on this rule is used to estimate engineering demand parameters such as those obtained by advanced probabilistic non-linear dynamic analysis, NLDA. We present a modification to the classic approach, to improve the predictability of the equal displacement rule. Uncertainties in seismic action and structural properties are considered. Mid-rise reinforced concrete buildings will be used as a testbed. To obtain a representative sample of buildings for statistical analysis, we describe the development through implementation of a numerical tool for calculating probabilistic NLDA. This tool, which is expected to evolve into interoperable software for assessing the seismic risk of structures, is developed within the framework of the KaIROS project. The results presented in this paper could be used to estimate the seismic risk of structures in a very simplified manner., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A simplified approach for including the incidence angle effect in seismic risk assessment

  • Vargas Alzate, Yeudy Felipe
  • Silva, Vitor
  • Vamvatsikos, Dimitrios
  • Pujades Beneit, Lluís
A simplified procedure is developed to consider the azimuthal orientation of buildings when estimating seismic risk. Two square-plan reinforced concrete building models are considered as a testbed, one with similar and one with dissimilar properties along the two principal horizontal axes. The fragility of both structures is analysed using a set of ground motion records rotated to multiple incidence angles to develop orientation-dependent fragility functions. It has been observed that, re-orienting all records so that these structures have the same azimuth vis-à-vis the corresponding epicentre leads to significant differences compared to assuming random orientations. Additional results stemming from single-degree-of-freedom oscillators further confirm such findings, showing a dependence to the proximity to the faults and the level of dissimilarity in the principal horizontal axes of the structure. The end results point to a non-negligible bias in assessment studies when a structure's orientation with respect to governing rupture scenarios is not taken into account. It is shown that the median of fragility curves calculated for un-rotated incidence angles can be bias-corrected through shifted by an amount that depends on the azimuthal orientation and level of axes-dissimilarity of structures., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Remote ambient vibration measurements with real aperture radar to estimate buildings dynamic properties

  • Alva Bañuelos, Rodrigo Esteban
  • González Drigo, José Ramón
  • Luzi, Guido
  • Caselles Magallón, Josep Oriol
  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
  • Pinzón Ureña, Luis
The use of sensors to obtain the dynamic properties of structures by means of ambient vibrations has become a common practice. However, conventional and more extensively used methods require the installation of sensors, which should be in contact with the structure. These methods could be even risky in case of structures weakened by a hazardous event, for which the risk of collapse is unknown. In this study, two main subjects are analyzed and discussed. The former is related to the use of the Real-Aperture Radar (RAR) as a non-invasive, remote sensing interferometric method to measure the vibration response to ambient noise of buildings. As a test bed, two high-rise regular buildings with reinforced concrete frames (8-story) and steel frames (12-story), located in Barcelona, Spain, are analyzed. Notice that the RAR device is a sensor using the principle of interferometry to measure displacements. This type of sensors has exhibited a good performance in urban environments at different atmospheric, meteorological and lighting conditions, compared to other types of remote sensors (e.g. Laser Doppler). Another advantage is that RAR devices have a very good resolution and they can operate at great distances from the object to be measured. However, so far, RAR is rarely used in buildings, being still a poorly studied technique. The latter subject is related to the optimal post-processing of the acquired data. At this respect, the Power Spectral Density (PSD) signal-processing technique is used to process the signals acquired. From this analysis, the predominant periods of the analyzed buildings were obtained and then they were compared with those periods obtained from measurements of accelerometers located inside the structures. The results indicate that the use of RAR can be a reliable alternative to estimate the structural periods in a relatively simple and non-invasive manner., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficiency of intensity measures considering near- and far-fault ground motion records

  • Vargas Alzate, Yeudy Felipe
  • Hurtado Gómez, Jorge Eduardo
This paper focuses on the identification of high-efficiency intensity measures to predict the seismic response of buildings affected by near- and far-fault ground motion records. Near-fault ground motion has received special attention, as it tends to increase the expected damage to civil structures compared to that from ruptures originating further afield. In order to verify this tendency, the nonlinear dynamic response of 3D multi-degree-of-freedom models is estimated by using a subset of records whose distance to the epicenter is lower than 10 km. In addition, to quantify how much the expected demand may increase because of the proximity to the fault, another subset of records, whose distance to the epicenter is in the range between 10 and 30 km, has been analyzed. Then, spectral and energy-based intensity measures as well as those obtained from specific computations of the ground motion record are calculated and correlated to several engineering demand parameters. From these analyses, fragility curves are derived and compared for both subsets of records. It has been observed that the subset of records nearer to the fault tends to produce fragility functions with higher probabilities of exceedance than the ones derived for far-fault records. Results also show that the efficiency of the intensity measures is similar for both subsets of records, but it varies depending on the engineering demand parameter to be predicted., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simulation and analysis of damage progression in a mid-rise RC building during and earthquake

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Alva Bañuelos, Rodrigo Esteban
  • Ávila Haro, Jorge Arturo
A five-story reinforced concrete building severely damaged during the Mw 5.1, May 11th 2011, Lorca earthquake (Murcia, Spain), has been monitored with an interferometric radar and has been numerically modelled with the aim to study the evolution of the structural damage. An initial non-damaged and a final damaged configuration of the building after the earthquake have been modelled first. Radar measurements helped to calibrate the models. Four intermediate models, with damage configurations representing four steps of cumulative damage of the building facing the earthquake, have been built based on the information related to the building seismic damage included in a technical report. The objectives were to obtain calibrated numerical models, to perform a modal analysis, to calculate the capacity curve, and to study the evolution of the natural periods and the strength capacity of the building within each damage configuration representing the incremental damage process. Results show that a growth of 20% in the values of natural periods and reductions of 50% in the capacity lead the building over the severe damage state threshold. The interferometric radar is a suitable remote sensing technique to identify, in a rapid screening, the natural periods of mid and tall damaged buildings., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU). Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program at UPC-Barcelona-Tech. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grants program of the Marie Sklodowska-Curie Actions (MSCA) of the European Union/European (H2020-MSCA-IF-2017) No 799553., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Spectral velocity-and energy-based intensity measures

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
  • Alva Bañuelos, Rodrigo Esteban
  • Pujades Beneit, Lluís
  • Tirado Gutiérrez, Rodolfo Javier
The statistical relationship between parameters that represent the intensity of ground motions induced by earthquakes (Intensity Measures, IM) and the nonlinear response of buildings (Engineering Demand Parameters, EDP) has been analyzed In this paper. To do so, the time-history response of a set of probabilistic 3D models, which simulate the dynamic behavior of Reinforced Concrete buildings, has been calculated via Non-Linear Dynamic Analysis. In this way, clouds of IM-EDP points are obtained and used to quantify efficiency and sufficiency. It has been observed that spectral velocity- and energy-based IMs are excellent proxies for EDPs; at least for those related to the deformation field of the structure. Finally, according to the epicenter location and azimuthal orientation of the models, subsets of results have been classified and statistically analyzed. The objective has been to present new evidence on the dependency between seismic fragility and the incidence angle of the incoming waves., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship in the research grant program of the Marie Sklodowska-Curie Actions, European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. This research has also been partially funded by the European Regional development Fund (ERDF) and the Spanish Government (Ministry of Science and Innovation) through the research projects EFA158/16/POCRISC and PID2020117374RB-I00 /AEI/10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic intensity measures based on energy and spectral velocity., Mesures de l'intensité sismique basées sur l'énergie et la vitesse spectrale., Misure dell'intensità sismica basate sull'energia e sulla velocità spettrale., Medidas de intensidad sísmica basadas en la energía y la velocidad espectral.

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Tirado Gutiérrez, Rodolfo Javier
  • Pujades Beneit, Lluís
This study analysed the statistical relationship between parameters representing the intensity of earthquake-induced ground movements (Intensity Measures, IM) and the non-linear dynamic response of buildings (Engineering Demand Parameters, EDP). To this end, the time-history response of a probabilistic set of 3D models simulating the behaviour of reinforced concrete buildings was calculated using Nonlinear Dynamic Analysis. This yielded IM-EDP point clouds that were used to quantify the efficiency and statistical sufficiency of the IM. It has been observed that IMs based on energy and spectral velocity are excellent predictors of EDPs, at least for those related to the deformation field of the structure. Finally, depending on the azimuthal orientation of the models with respect to the epicentre of the earthquake, subsets of results have been classified and statistically analysed. The objective has been to present new evidence on the dependence between seismic fragility and the angle of incidence of incoming waves. The results presented in this work serve to reduce uncertainties in predictions of the seismic response of civil structures, which would increase reliability in design and vulnerability estimates at the regional scale., Yeudy F. Vargas-Alzate recibió una beca individual en el programa de becas de investigación de las Acciones Marie Sklodowska-Curie, Unión Europea (H2020-MSCA-IF-2017) No 799553. Este autor está profundamente agradecido a esta institución. Esta investigación también ha sido parcialmente financiada por el Fondo Europeo de Desarrollo Regional (FEDER) y el Gobierno de España (Ministerio de Ciencia e Innovación) a través de los proyectos de investigación EFA158/16/POCRISC y PID2020117374RB-I00/AEI/10.13039/501100011033., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New insights into the relationship between seismic intensity measures and nonlinear structural response

  • Vargas Alzate, Yeudy Felipe
  • Hurtado Gómez, Jorge Eduardo
  • Pujades Beneit, Lluís
This paper focuses on the probabilistic analysis of Intensity Measures (IMs) and Engineering Demand Parameters (EDPs) in the context of earthquake-induced ground motions. Several statistical properties, which are desirable in IMs when they are used to predict EDPs, have been analysed. Specifically, efficiency, sufficiency and steadfastness have been quantified for a set of IMs with respect to two EDPs: the maximum inter-storey drift ratio, MIDR, and the maximum floor acceleration, MFA. Steadfastness is a new statistical property proposed in this article, which is related to the ability of IMs to forecast EDPs for large building suites. In other words, this means that efficiency does not significantly vary when different types of buildings are simultanously considered in the statistical analyses. This property allows reducing the number of calculations when performing seismic risk estimations at urban level since, for instance, a large variety of fragility curves, representing specific building typologies, can be grouped together within a more generic one. The main sources of uncertainty involved in the calculation of the seismic risk have been considered in the analysis. To do so, the nonlinear dynamic responses of probabilistic multi-degree-of-freedom building models, subjected to a large data set of ground motion records, have been calculated. These models have been generated to simulate the dynamic behavior of reinforced concrete buildings whose number of stories vary from 3 to 13. 18 spectrum-, energy- and direct-accelerogram-based IMs have been considered herein. Then, from clouds of IM-EDP points, efficiency, sufficiency and steadfastness have been quantified. For MIDR, results show that IMs based on spectral velocity are more efficient and steadfast than the ones based on spectral acceleration; spectral velocity averaged in a range of periods, AvSv, has shown to be the most efficient IM with an adequate level of steadfastness. For MFA, spectral acceleration-based-IMs are more efficient than velocity-based ones. A comparison is also presented on the use of linear vs quadratic regression models, and their implications on the derivation of fragility functions. Concerning sufficiency, most of the 18 IMs analysed do not have this property. Nonetheless, multi-regression models have been employed to address this lack of sufficiency allowing to obtain a so-called ‘ideal’ IM., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. H2020 Marie Skłodowska-Curie Actions, 799553, Yeudy Felipe Vargas-Alzate., Peer Reviewed, Postprint (published version)