Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ambient modal identification applied to a school building in Girona (Spain)

  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
  • Lantada, Nieves
  • Blázquez Boya, Antoni
  • Jara Salvador, José Antonio
The main results of the operational modal analysis of a school building are shown. The building has a four-stories framed-reinforced-concrete structure and it was instrumented with 7 triaxial accelerometers, recording along eight days. Also, specific remote measurements were made with an interferometric radar. The purpose was: i) to monitor periods of activity-inactivity, ii) to identify modal frequencies; iii) to validate a numerical model of the structure and iv) to analyse the feasibility of the radar for remote operational modal analysis. This research allowed us: 1) to quantify clear variations in noise intensity, matching the school activities, 2) to identify the fundamental modes and natural frequencies, which were of 4.4 Hz and 5.4 Hz, in the longitudinal and transversal directions, respectively, 3) to observe slight variations of modal frequencies throughout the day, attributed to the loading/unloading of the building, and at night, attributed to variations in temperature; 4) to confirm the usefulness and suitability of frequency experimental measurements to improve the quality and reliability of building numerical models and, 5) to evaluate the potential of radar measurements for operational modal analysis; radar operates better in tall and flexible buildings, than in rigid ones., José Antonio Jara, of the “Institut Cartogràfic i Geològic de Catalunya”, ICGC, was responsible for the instrumentation of the building and for data collection and storage. The help of Meritxell Nicolau and Josep Soler, secretary and administrator of the “Institut Santa Eugènia” of Girona, Spain, is greatly recognized and acknowledged; they both made possible the accurate instrumentation of the building. Antoni Blázquez, from the Association of Structural Consultants (ACE), provided the plans and documentation of the building. This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic monitoring of a mid-rise building by real-aperture radar interferometer: advantages and limitations

  • Alva Bañuelos, Rodrigo Esteban
  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
  • Luzi, Guido
  • Caselles Magallón, Josep Oriol
  • Pinzón Ureña, Luis
In this paper, remote and in situ techniques to estimate the dynamic response of a building to ambient vibration are reported: data acquired through a real-aperture radar (RAR) interferometer and conventional accelerometers are analyzed. A five-story reinforced concrete housing building, which was damaged during the May 11th 2011 Lorca (Spain) earthquake, is used as a case study. The building was monitored using both types of instruments. The dynamic properties of the building are estimated first taking acceleration measurements using a set of 10 high-precision accelerometers installed on the roof of the building. Further, the displacement–time histories, recorded with the RAR device pointing to a corner of the building, are analyzed. Then, the ability and shortcomings of RAR measurements to deal with the fundamental frequencies of vibration of the structure are investigated. The advantages and limitations of from-inside (accelerometric) and from-outside (RAR) measurements are highlighted and discussed. A relevant conclusion is that, after strong earthquakes, RAR may be an interesting and useful tool, as it allows surveying the structural response of mid-rise buildings remotely, without the need to enter the structures, which may be dangerous for inspectors or technicians in cases of severely damaged buildings. Given that the instrumented building suffered significant damage, the ability of these kinds of measurements to detect damage is also discussed., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México. L.A.P. is supported by a Ph.D. scholarship grant from the Institute for the Training and Development of Human Resources (IFARHU) and the Government of Panama’s National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Case study of a heavily damaged building during the 2016 MW 7.8 Ecuador earthquake: directionality effects in seismic actions and damage assessment

  • Pinzón Ureña, Luis
  • Pujades Beneit, Lluís
  • Medranda, Irving
  • Alva Bañuelos, Rodrigo Esteban
In this work, the directionality effects during the MW 7.8 earthquake, which occurred in Muisne (Ecuador) on 16 April 2016, were analyzed under two perspectives. The first one deals with the influence of these effects on seismic intensity measures (IMs), while the second refers to the assessment of the expected damage of a specific building located in Manta city, Ecuador, as a function of its azimuthal orientation. The records of strong motion in 21 accelerometric stations were used to analyze directionality in seismic actions. At the closest station to the epicenter (RRup = 20 km), the peak ground acceleration was 1380 cm/s2 (EW component of the APED station). A detailed study of the response spectra ratifies the importance of directionality and confirms the need to consider these effects in seismic hazard studies. Differences between IMs values that consider the directionality and those obtained from the as-recorded accelerograms are significant and they agree with studies carried out in other regions. Concerning the variation of the expected damage with respect to the building orientation, a reinforced concrete building, which was seriously affected by the earthquake, was taken as a case study. For this analysis, the accelerograms recorded at a nearby station and detailed structural documentation were used. The ETABS software was used for the structural analysis. Modal and pushover analyses were performed, obtaining capacity curves and capacity spectra in the two main axes of the building. Two advanced methods for damage assessment were used to obtain fragility and mean damage state curves. The performance points were obtained through the linear equivalent approximation. This allows estimation and analysis of the expected mean damage state and the probability of complete damage as functions of the building orientation. Results show that the actual probability of complete damage is close to 60%. This fact is mainly due to the greater severity of the seismic action in one of the two main axes of the building. The results are in accordance with the damage produced by the earthquake in the building and confirm the need to consider the directionality effects in damage and seismic risk assessments., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energy-related parameters and structural damage in nonlinear dynamic analysis

  • Alva Bañuelos, Rodrigo Esteban
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Pinzón Ureña, Luis
Non Linear Dynamic Analysis (NLDA) is increasing its popularity not only for research but also for the Performance-Based Design (PBD) and analysis of actual buildings. The standards and codes offer guidance and minimum requirements to perform NLDA, however, many aspects are open to expert judgement and such is the case of the input ground motions choice. In the Eurocode 8 (EC8), for example, a set of ground motions, artificial or recorded, can be selected and scaled so that their response spectra approximately characterise the desired target spectrum, and for this purpose, the spectral matching techniques are becoming more popular. This study aims to assess the influence of energy-related parameters, such as the significant duration (𝐷��𝐷��𝑎��𝑎��5−95) and Arias Intensity (𝐼��𝐼��𝑎��𝑎��) of spectrally matched records, on the NLDA damage results in terms of the well-known Park and Ang damage index. Particularly, variations in the damage of a real building were studied using a set of four different seismic records spectrally matched to several EC8 design spectra. The results show significant differences in the damage produced by the spectrally equivalent records. Records with larger energy input lead to greater damage compared to the shorter and less energetic records. It is concluded that the energy-related features of the input records might have more impact on the structural damage than the acceleration-related ones., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic performance of URM buildings: a probabilistic approach

  • Ávila Haro, Jorge Arturo
  • González Drigo, José Ramón
  • Vargas Alzate, Yeudy Felipe
  • Alva Bañuelos, Rodrigo Esteban
  • Pujades Beneit, Lluís
The research conducted in this work focuses on the uncertainties related to the mechanical properties of the construction material of interest (i.e., unreinforced masonry -URM), and the influence of their variability on the seismic performance of a representative seven-story URM building of the Eixample district in Barcelona, Spain. The selected building typology represents 72 % of the building stock in this district, with a mean age of 90 years and the use of early council guidelines that are considered as pre-code rules. The results are presented in terms of correlations between damage parameters and material properties. A numerical model of the building was developed and, considering the variability of the material properties, a sample of 1000 numerical models has been used as a benchmark. The seismic response of each variant of the building’s numerical model is obtained through a simplified non-linear static procedure aiming to compare and categorize the influence of each of the selected mechanical properties on the seismic performance of the building. The analysis carried out shows that the variability in the material properties generates important uncertainties in the seismic response of these URM buildings, leading to over or underestimate the damage when performing the analysis for specific buildings and without a probabilistic approach., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simulation and analysis of damage progression in a mid-rise RC building during and earthquake

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Alva Bañuelos, Rodrigo Esteban
  • Ávila Haro, Jorge Arturo
A five-story reinforced concrete building severely damaged during the Mw 5.1, May 11th 2011, Lorca earthquake (Murcia, Spain), has been monitored with an interferometric radar and has been numerically modelled with the aim to study the evolution of the structural damage. An initial non-damaged and a final damaged configuration of the building after the earthquake have been modelled first. Radar measurements helped to calibrate the models. Four intermediate models, with damage configurations representing four steps of cumulative damage of the building facing the earthquake, have been built based on the information related to the building seismic damage included in a technical report. The objectives were to obtain calibrated numerical models, to perform a modal analysis, to calculate the capacity curve, and to study the evolution of the natural periods and the strength capacity of the building within each damage configuration representing the incremental damage process. Results show that a growth of 20% in the values of natural periods and reductions of 50% in the capacity lead the building over the severe damage state threshold. The interferometric radar is a suitable remote sensing technique to identify, in a rapid screening, the natural periods of mid and tall damaged buildings., This research has been partially funded by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033, and by the European Regional Development Fund (ERDF) of the European Union (EU) through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU). Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program at UPC-Barcelona-Tech. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grants program of the Marie Sklodowska-Curie Actions (MSCA) of the European Union/European (H2020-MSCA-IF-2017) No 799553., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)