Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Improvement of InSAR displacements based on GNSS station calibration over corner reflector

  • Alonso Díaz, Alex
  • Roque, Dora
  • Lima, José Nuno
  • Rodríguez Somoza, Juan Luis
  • Solla Carracelas, Maria Mercedes
This article presents an analysis of the effectiveness of performing a calibration through Global Navigation Satellite System (GNSS) data on different approaches of the Interferometric Synthetic Aperture Radar (InSAR). InSAR has become a key technique for monitoring ground surface, but its results often exhibit systematic biases and deviations from ground truth measurements. This study addresses the need for more reliable displacement data by evaluating a GNSS-based calibration approach across three InSAR processing approaches: i) Persistent Scattering Interferometry (PSI) method using the open-source software StaMPS, ii) PSI method using the commercial SARPROZ software and iii) the Quasi-PS method implemented with SARPROZ. Sentinel-1 A/B data from both ascending and descending orbits, covering the period from October 2017 to January 2019, were used. Displacement errors from the same points were modeled using polynomial regressions and calibrated using reference data from GNSS and levelling, both with submillimeter precision. The effectiveness of the calibration was assessed at two levels: locally (via a corner reflector) and globally (via a GNSS baseline several kilometers long). Results show that 25 out of 27 displacement time series required correction in the mean value, with StaMPS showing the greatest need for calibration. The calibration improved the original results at all scales and acted mainly on the mean difference, with linear calibration being the most robust and consistent option. These findings highlight the importance of incorporating ground truth data to enhance InSAR reliability and support its application in geodetic and structural monitoring., Universidade de Vigo/CISUG, Ministerio de Ciencia e Innovación | Ref. TED2021-130183B-I00, Ministerio de Ciencia e Innovación | Ref. RYC2019–026604–I, Xunta de Galicia | Ref. ED431F 2021/08, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Combining GPR, passive seismic, and load testing with computational models in the assessment of historical bridges: the case study of the Comboa Bridge

  • Pérez Gracia, Vega
  • Solla Carracelas, Maria Mercedes
  • Fontul, Simona
  • Caselles, Oriol
  • Balado Frías, Jesús
  • Alva, Rodrigo
  • Rodríguez Somoza, Juan Luis
  • González Drigo, Ramón
The preservation of historical bridges usually requires extensive structural evaluations for possible damage detection. Therefore, effective techniques are essential for diagnosis and, consequently, proper maintenance and rehabilitation actions. The combination of techniques provides complementary data that support decision making. A complete assessment was applied in the study of the Comboa Bridge, a medieval masonry structure in river Verdugo, in Galicia (Spain). It has three irregular arches, and the first visual inspection denotes the existence of important cracking and vegetation in the stonework. One of the most representative nondestructive testing (NDT) techniques for in situ evaluation is ground‐penetrating radar (GPR) that offers detailed insights into subsurface conditions, revealing information about materials, voids, and deterioration, while loading tests and passive seismic methods provide dynamic responses that are related to type of structure and possible damage. This method was combined with loading tests to obtain deflections of the bridge deck and passive seismic for analyzing the dynamic behavior. Moreover, 3D models of the structure were set up using light detection and ranging (LiDAR), performed with terrestrial laser scanning, and unmanned aerial vehicle (UAV) surveying. By combining 3D models with NDT techniques, the results provide comprehensive information that enhances the understanding of a bridge’s condition and safety. These results are used for calibrating the dynamic computational model of the structure in order to obtain the vibration modes. Each technique used in the study presents limitations, which are addressed and discussed herein. Furthermore, the site conditions can also affect the results, as the effectiveness of these methods can vary greatly, depending on the materials and structures, which influences the electromagnetic and mechanical wave propagation. Additionally, the frequency of the waves may not effectively mark all relevant structural features or smaller damage. When used together, the NDT methods can complement each other’s strengths, but challenges remain. Overall, while these techniques are valuable tools for assessing historical bridges, awareness of their limitations is crucial for accurate interpretation and effective decision making in preservation efforts. The results obtained in the Comboa Bridge demonstrate improved accuracy in identifying structural anomalies. Additionally, recommendations to overcome some of these challenges in case of historical bridge assessment and also for the continuous monitoring and adequate maintenance actions to preserve the bridge integrity and safety are presented., Xunta de Galicia | Ref. ED431F 2021/08, Agencia Estatal de Investigación | Ref. RYC2019-026604-I, Agencia Estatal de Investigación | Ref. TED2021-130183BI00, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Agencia Estatal de Investigación | Ref. PID2020-117374RB-I00, Generalitat de Catalunya | Ref. SGR 2021 01060
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A new approach to enhancing inSAR-based subsidence detection in pavements: validation with complementary FWD and GPR data

  • Alonso Díaz, Alex
  • Solla Carracelas, Maria Mercedes
  • Fontul, Simona
  • Marecos, Vânia
  • Pais, Jorge C
This article explores the benefits of a novel, non-invasive, and multi-scale methodology for pavement condition monitoring by developing a Key Performance Indicator (KPI) derived from Interferometric Synthetic Aperture Radar (InSAR) results, obtained through the Persistent Scatter Interferometry (PSI) and Quasi-PS (QPS) methods. These methods were applied with SARPROZ software using Sentinel-1 images. InSAR enables network-level identification of subsidence and differential settlements, particularly in transition zones. For the first time, InSAR outputs are synthesized into an interpretable KPI and validated against complementary non-destructive tests—Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR), with the goal of providing a cost-effective and holistic joint assessment methodology, ensuring more, overcoming the interpretation limitations of stand-alone tests, and optimizing the required amount of in-situ measurements. FWD loading tests were performed to provide information on the structural condition of the pavement, while GPR measurements, using air-launched frequency antennas (1.0 GHz and 1.8 GHz), detected changes in pavement structure and possible internal defects. The results obtained demonstrate that implementing a KPI synthesizes InSAR outputs into a more interpretable and actionable metric, validated with more meaningful correlations with FWD and GPR analysis, enabling the detection of transition zones, specific elements, and potential damages. From KPI it was also determined the limit of detection for the case study in a national road in Portugal. The holistic approach offers a more efficient, safer, and cost-effective tool for evaluating pavement condition., Xunta de Galicia | Ref. ED431F 2021/08, Universidade de Vigo | Ref. MOBVIGO_23, Ministerio de Universidades | Ref. CAS21/00241, Agencia Estatal de Investigación | Ref. RYC2019-026604-I, Agencia Estatal de Investigación | Ref. TED2021-130183B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic identification of pavement subsurface distresses from ground penetrating radar data using few-shot data augmentation and YOLOv11

  • Elseicy , Ahmed Mossad Ibrahim
  • Arias Sánchez, Pedro
  • Solla Carracelas, Maria Mercedes
Accurate identification of pavement distress using ground penetrating radar (GPR) data is essential for nondestructive maintenance and safety assessment of roadway structures. However, the scarcity of annotated GPR datasets limits the performance of deep learning models. This study presents a method for automated pavement distress detection using few-shot data augmentation and YOLOv11 (you only look once, version 11). A generative framework based on an improved explainable single-image generative adversarial network (ExSinGAN) is used to generate realistic GPR images from a small number of original samples. The generated data are combined with the urban roadway disease dataset (URDD) to train the YOLOv11 detector to identify subsurface distresses, such as cavities and looseness. Comparative experiments with gprMax-simulated data and field validation confirm the reliability and adaptability of the proposed approach. The results show an increase in mean average precision (mAP) from 84.69% to 89.31%, precision from 77.73% to 83.13%, and recall from 81.30% to 83.37% compared to the baseline trained on URDD alone. These findings demonstrate that few-shot generative augmentation effectively mitigates data scarcity and improves the robustness of GPR-based distress detection. The developed model was further validated on field data, confirming its generalization to real-world GPR measurements. The proposed method supports non-destructive monitoring of pavement structures. It provides practical value to civil engineers by facilitating early detection of underground defects and reducing the risk of pavement collapse from sinkholes., Agencia Estatal de Investigación | Ref. TED2021-130183B-I00, Agencia Estatal de Investigación | Ref. PID2022-138526OB-I00, Agencia Estatal de Investigación | Ref. PREP2022-000030, Agencia Estatal de Investigación | Ref. CNS2024-154766
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Using InSAR and GPR techniques to detect subsidence: application to the coastal area of “A Xunqueira” (NW Spain)

  • Alonso Díaz, Alex
  • Casado Rabasco, Josué
  • Solla Carracelas, Maria Mercedes
  • Lagüela, Susana
Climate change represents an important cause of subsidence, especially in coastal cities affected by changes in surface water level and water table. This paper presents a complementary study of Interferometric Synthetic Aperture Radar (InSAR) and Ground Penetrating Radar (GPR) for the early detection of subsidence and sinkhole phenomena. The methodology was applied to a coastal urban area in Galicia, northwest Spain (humid region), showing apparent signs of subsidence and building settlement during the last two years. Two different InSAR methods are compared for the period from June 2021 to March 2022: PSI (Persistent Scatterer Interferometry) and SBAS (Small Baseline Subsets), and the average deformation velocities obtained resulted in −3.0 mm/yr and −4.1 mm/yr, respectively. Additional GPR data were collected in January 2022 to validate the InSAR results, which detected subsidence in agreement with the persistent scatters obtained from the PSI method. This is crucial information to plan preventive maintenance., Xunta de Galicia | Ref. ED431F 2021/08, European Commission | Ref. 101036926, European Commission | Ref. 101021714, Ministerio de Ciencia e Innovación | Ref. RYC2019–026604–I, Ministerio de Universidades | Ref. CAS21/00241, Ministerio de Ciencia e Innovación | Ref. TED2021-130183B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

InSAR-derived subsidence susceptibility mapping using open-access geospatial data and random forest

  • Alvarez Dieguez, Belén Lara
  • Balado Frías, Jesús
  • Solla Carracelas, Maria Mercedes
Ground instability presents an increasing challenge to the safety and resilience of transport infrastructure, particularly in relation to processes such as subsidence and sinkhole-related hazards. This study presents a reproducible, open-access machine learning framework for mapping subsidence susceptibility along the AG-64 highway in Spain, integrating satellite-based Interferometric Synthetic Aperture Radar (InSAR) data with geospatial predictors. Using a Random Forest classifier, the methodology incorporates five primary environmental variables and four engineered interaction features (specifically designed to capture the complex synergy between lithological conditions and climatic forcing). The class-weighted model achieved a high recall of 0.92 and precision of 0.83 using a conventional random 70/30-pixel split, indicating strong pixel-level discrimination in identifying subsiding areas while minimizing false negatives. To assess spatial robustness, the model was further evaluated using spatial block cross-validation based on an estimated autocorrelation range of 4.48 km. Evaluation on an independent spatial test set comprising 61 geographically excluded 5-km blocks yielded more conservative performance (ROC–AUC = 0.591), with a recall of 0.671 and precision of 0.187 at the spatially calibrated threshold. It is noteworthy that the mapped susceptibility patterns were contextually supported using Falling Weight Deflectometer (FWD) measurements and maintenance records from the official inspection campaign. Results show a statistically significant, positive and moderate association between historical pavement deflection and predicted susceptibility in road segments without documented maintenance. This workflow provides a transparent, data-driven tool for infrastructure managers to prioritize field inspections and enhance the resilience of road corridors in geohazard-prone environments., Agencia Estatal de Investigación | Ref. CNS2024-154766, Agencia Estatal de Investigación | Ref. TED2021-130183B-I00, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Unsupervised machine learning for clustering and analyzing InSAR-derived ground deformation: insights from X- and C-band

  • Alonso Díaz, Alex
  • Solla Carracelas, Maria Mercedes
  • Perissin, Daniele
  • Sousa, Joaquim
New approach for interpreting Interferometric Synthetic Aperture Radar (InSAR) results with unsupervised machine learning on variables and time series. The study compares Persistent Scatterer Interferometry (PSI) results from X-band (PAZ-X) and C-band (Sentinel-1) satellite images over a Portuguese region. Validation with GNSS data demonstrates high precision, with average Euclidean Distances (ED) of 2.8 mm (X-band) and 3.6 mm (C-band). Despite having fewer images (25 vs. 30), X-band achieves higher scatter density (1,126 scatterers/km²) compared to C-band (678 scatterers/km²). InSAR reduced dimensionality and independent variables are clustered using K-means, DBSCAN, and OPTICS algorithms. Time-series are clustered using partitioning and hierarchical methods based on ED and Dynamic Time Warping (DTW) measures. The clusters obtained were interpreted and a refinement mode is implemented based on inter-algorithm consistency to enhance cluster reliability. For evaluation and application results are compared with land-use maps. The findings indicate that Sentinel-1 exhibits higher complexity (15% lower consistency with land-use map) compared to PAZ-X. Moreover, the refinement mode improves target identification for both datasets, increasing classification accuracy by 5% and 7% for PAZ-X and Sentinel-1, respectively. The methodology enhances geohazard monitoring generating alert index maps for specific elements with applicability in urban planning, infrastructure stability and natural hazard mitigation., Agencia Estatal de Investigación | Ref. TED2021-130183B-I00, Xunta de Galicia | Ref. ED431C 2024/30, INTERREG Spain-Portugal (POCTEP) 2021−2027
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Deep learning-based interpretation of ground penetrating radar data for pavement condition monitoring, Interpretación basada en el aprendizaje profundo de datos georradar para la evaluación del estado de pavimentos, Interpretación baseada na aprendizaxe profunda dos datos do radas de penetración terrestre para a avaliación do estado do pavimento

  • Elseicy , Ahmed Mossad Ibrahim
Road pavements are vital elements that should be in good physical condition to provide a safe and seamless flow to transport people and goods. However, they are subjected to various internal defects because of aging, environmental conditions, changing traffic load, and poor maintenance. Therefore, regular pavement inspections are performed to ensure their serviceability. Ground Penetrating Radar (GPR) is one of the nondestructive techniques that is widely used for inspecting road pavements subsurface. It is used to assess the condition of the pavement and the thickness of its layers. Furthermore, it can identify subsurface defects, such as cracks, voids, and subgrade settlements. Nevertheless, the current practice is to interpret GPR data using heuristic methods which are time-consuming and highly dependent on the user experience. Moreover, the output of the processing cannot be easily integrated with CAD and BIM software due to lake of data interoperability. Recently, deep learning-based methods have been applied to interpret GPR data and to overcome the interpretation subjectivity challenge. However, choosing a suitable network architecture and post-processing techniques for feature extraction is still undergoing investigation. This research aims to apply state-of-the-art deep learning techniques to process GPR data of the road pavements automatically. The target features are pavement layer thickness and road defects, such as cracks, delamination, voids, and moisture damages. The proposed algorithms aim to reduce the processing time and detect the hidden patterns of the data, which will help to eliminate the interpretation subjectivity. Moreover, the results are automatically exported as a georeferenced 3D dataset with semantic labels instead of representing them as labeled radargrams or tabular reports. The labeled dataset can be integrated with the existing building information modeling (BIM) and geographic information systems (GIS) applications., Los pavimentos de las carreteras son elementos vitales que deben estar en buenas condiciones físicas para proporcionar un flujo seguro y sin problemas al transporte de personas y mercancías. Sin embargo, están sujetos a diversos defectos internos debido al envejecimiento, las condiciones ambientales, los cambios en la carga de tráfico y un mantenimiento deficiente. Por lo tanto, se realizan inspecciones periódicas de los pavimentos para garantizar su capacidad de servicio. El radar de penetración terrestre o georradar (GPR por sus siglas en inglés) es una de las técnicas no destructivas más utilizadas para inspeccionar el subsuelo de las carreteras. Se utiliza para evaluar el estado del pavimento y el espesor de sus capas. Además, puede identificar defectos en el subsuelo, como pueden ser grietas, huecos y asentamientos de la subrasante. Sin embargo, la práctica actual consiste en interpretar los datos del GPR mediante métodos heurísticos que requieren mucho tiempo y dependen en gran medida de la experiencia del usuario. Además, el resultado del procesamiento no se puede integrar fácilmente en software CAD y BIM debido a la falta de interoperabilidad de los datos. Recientemente, se han aplicado métodos basados en el aprendizaje profundo para interpretar los datos GPR y superar el desafío de la subjetividad en la interpretación. Sin embargo, la elección de una arquitectura de red adecuada y las técnicas de post-procesamiento para la extracción de características todavía se están investigando y no existe una metodología de confianza. La investigación de este trabajo doctoral tiene como objetivo aplicar técnicas de aprendizaje profundo de última generación para procesar automáticamente los datos GPR en pavimentos de carreteras. Las características objetivo son el grosor de la capa del pavimento y los defectos de la carretera (grietas, delaminación, vacíos, humedad). Los algoritmos propuestos tienen como objetivo reducir el tiempo de procesamiento y detectar los patrones ocultos en las señales radar registradas, lo que ayudará a eliminar la subjetividad en la interpretación. Además, los resultados se exportarán automáticamente como un conjunto de datos 3D georreferenciados con etiquetas semánticas en lugar de representarlos como radargramas etiquetados o informes tabulares. El conjunto de datos etiquetados puede integrarse con las aplicaciones existentes de modelado de información de edificios (BIM) y de sistemas de información geográfica (GIS)., Os pavimentos das estradas son elementos vitais que deben estar en boas condicións físicas para proporcionar un fluxo seguro e sen problemas para o transporte de persoas e mercadorías. Con todo, están suxeitos a diversos defectos internos debido ao envellecemento, as condicións ambientais, os cambios na carga de tráfico e un mantemento deficiente. Por tanto, realízanse inspeccións periódicas dos pavimentos para garantir a súa capacidade de servizo. O radar de penetración terrestre ou xeorradar ( GPR polas súas siglas en inglés) é unha das técnicas non destrutivas máis utilizadas para inspeccionar o subsolo das estradas. Utilízase para avaliar o estado do pavimento e o espesor das súas capas. Ademais, pode identificar defectos no subsolo, como gretas, ocos e asentamentos da subrasante. Con todo, a práctica actual consiste en interpretar os datos do GPR mediante métodos heurísticos. Estes métodos consomen moito tempo e dependen en gran medida da experiencia do usuario. Ademais, o resultado do procesamento non pode integrarse facilmente no software CAD e BIM debido á falta de interoperabilidade dos datos. Recentemente, aplicáronse métodos baseados na aprendizaxe profunda para interpretar os datos GPR e superar o desafío da subxectividade na interpretación. Con todo, a elección dunha arquitectura de rede adecuada e as técnicas de posprocesamento para a extracción de características seguen sendo obxecto de investigación. A investigación neste traballo de doutoramento ten como obxectivo aplicar técnicas de aprendizaxe profunda de última xeración para procesar automaticamente os datos GPR en pavimentos de estradas. As características obxectivo son o espesor da capa do pavimento e os defectos da estrada (gretas, delaminación, baleiros e humidade). Os algoritmos propostos teñen como obxectivo reducir o tempo de procesamento e detectar os patróns ocultos nos sinais radar rexistrados, o que axudará a eliminar a subxectividade na interpretación. Ademais, os resultados exportaranse automaticamente como un conxunto de datos 3D xeorreferenciado con etiquetas semánticas en lugar de representarse como radargramas etiquetados ou informes tabulares. O conxunto de datos etiquetados pódese integrar coas aplicacións existentes de modelado de información de edificios (BIM) e sistemas de información xeográfica (GIS)., Ministerio de Ciencia e Innovación | Ref. PREP2022-000030, Agencia Estatal de Investigación | Ref. PID2022-138526OB-I00, Agencia Estatal de Investigación | Ref. TED2021-130183B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Clustering approach for crack detection in GPR data: influence of infilling material on detectability

  • Solla Carracelas, Maria Mercedes
  • Fernández, Norberto
  • Elseicy , Ahmed Mossad Ibrahim
  • Pais, Jorge
Ground-Penetrating Radar (GPR) is a non-destructive method widely used for detecting cracks and other subsurface defects in concrete pavements. The effectiveness of GPR in detecting cracks can be significantly influenced by the infilling material present in the cracks. This work presents an approach based on clustering algorithms, to automatically highlight cracks in concrete slabs. In particular, the crack detection problem is cast as an anomaly detection scenario, where the clustering algorithm is used to discern between anomalous and non-anomalous A-Scans in a radargram, the former considered a potential sign of a crack. In order to cluster the time series of the A-Scans, the usage of a K-Spectral Centroid (KSC) algorithm is proposed, though a comparison with the popular K-means algorithm is also provided. Different crack sizes and infilling materials were simulated to analyze their influence on detectability. Understanding the properties of these materials and their impact on GPR signal reflection, absorption, and transmission is crucial for accurate crack detection. The results have demonstrated that infillings showing large dielectric contrast with concrete have enhanced crack detection. Moreover, GPR data collection was conducted in both perpendicular and parallel broadside orientations. The results obtained with the perpendicular broadside orientation are equivalent for both KSC and K-means, whereas for the parallel broadside orientation KSC outperforms K-means. According to these results, clustering algorithms can be successfully applied to the problem of crack detection from GPR data, thus contributing valuable information for decision-making in maintenance., Agencia Estatal de Investigación | Ref. TED2021-130183B-I00, Agencia Estatal de Investigación | Ref. PID2022-138526OB-I00, Agencia Estatal de Investigación | Ref. PREP2022-000030, Agencia Estatal de Investigación | Ref. RYC2019-026604-I, Fundación BBVA