Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Deep learning for ultrasound surface echo detection

  • Cosarinsky, Guillermo
  • Muñoz, Mario
  • Fernández Cruza, Jorge
  • Rubio, Adrián
  • Camacho Sosa-Días, Jorge
20th World Conference for Non-Destructive Testing (WCNDT), 27-31 May 2024, Songdo Convensia, Incheon, Korea. 9 páginas, 6 figuras, 1 tabla., Ultrasound array imaging techniques are often applied using a coupling medium to transmit waves from the transducer to the scanned component. In this type of tests, the echoes generated by the wave reflection at the component surface contain information that can be used to estimate the surface shape and its position relative to the probe, which are needed to compute the imaging focal laws. The most interesting feature to extract from surfaces echoes is the Time of Flight (TOF) for each reception channel. TOF measurement in acoustic signals is a problem that frequently arises not only in Non Destructive Testing (NDT), but also in medical imaging, geophysics and other fields. The surface echo in a signal is usually identified as the first high amplitude peak, and is traditionally detected with standard methods as threshold crossing, peak search or matched filters. All these methods are easily affected by Signal to Noise Ratio, which might be high in some channels, for example if the ray arrives at the corresponding element at a low sensibility angle. Moreover, spurious echoes from bubbles, the emission signal tail or echoes from other parts of the component can be incorrectly labelled as surface echoes. This kind of outliers are difficult to filter by conventional means and, thus, there is a need for more robust surface estimation methods. In this work, we study the application of a deep 3D Convolutional Neural Network (CNN) to detect surface echoes in Full Matrix Capture (FMC) ultrasound data. The CNN is trained using signals acquired with a matrix array and a reference component, using a robotic arm set-up to measure the probe position and orientation relative to the component. Thus, with knowledge of the set-up geometry, a model is used to compute the theoretical surface echo TOFs, which are used to label the data for training. The model was tested with a validation set, presenting good agreement with the ground truth. The results were compared with the threshold crossing method observing a significant reduction of outliers in the TOF estimation., This research was supported by the projects PDC2022-133504-I00 founded by MCIN/AEI/10.13039/501100011033 (Spain) and “Next Generation EU”/PRTR (European Union), by the fellowship PRE2019-088602 founded by MCIU (Spain) and by the project PID2022-143271OB-I00, founded MCIN/AEI /10.13039/501100011033/FEDER, UE, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Benchmark of Hardware Acceleration of AI-based Lung Ultrasound Segmentation

  • Rubio, Adrián
  • Muñoz, Mario
  • Cosarinsky, Guillermo
  • Camacho Sosa-Días, Jorge
II Jornadas de Jóvenes Investigadores ITEFI, 11 diciembre 2025, Madrid, España., Lung Ultrasound (LUS) imaging is a valuable diagnostic technique for lung condition evaluation, due to its non-ionizing and portable nature. However, its complex interpretation can be enhanced by Machine Learning (ML) tools, yet traditional solutions often fail to meet the speed demands of real-time applications. This work presents a Field Programmable Gate Array (FPGA)-based hardware solution for real-time segmentation of lung ultrasound images using a Convolutional Neural Network (CNN), achieving a throughput of 80 inferences per second., Supported by the project PID2022-143271OB-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Segmentation of Lung Ultrasound images using Cross Domain Transfer Learning

  • Muñoz, Mario
  • Rubio, Adrián
  • Cosarinsky, Guillermo
  • Camacho Sosa-Días, Jorge
II Jornadas de Jóvenes Investigadores ITEFI, 11 de diciembre 2025, This research was partially supported by the project PID2022 143271OB I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE; and supported by the European Commission + NextGenerationEU , through Momentum CSIC Programme, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ultrasound Surface Echo Detection by Volumetric Convolutional Neural Network

  • Muñoz, Mario
  • Rubio, Adrián
  • Larrea, Marcelo
  • Cruza, Jorge F.
  • Camacho Sosa-Días, Jorge
  • Cosarinsky, Guillermo
II Jornadas Jóvenes Investigadores ITEFI, 11 diciembre 2025, This research was partially supported by the project PID2022-143271OB-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE; and supported by the European Commission + NextGenerationEU, through Momentum CSIC Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Adaptive 3D Plane Wave Imaging through interfaces

  • Cosarinsky, Guillermo
  • Rubio, Adrián
  • Muñoz, Mario
  • Cruza, Jorge F.
  • Camacho Sosa-Días, Jorge
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering, 23rd to 26th june 2025, Málaga (Spain) 7 páginas, 3 figuras., Plane Wave Imaging (PWI) with ultrasonic arrays, ini- tially developed for fast medical imaging, is nowa- days being applied in Ultrasonic Testing (UT) for Non- Destructive Testing (NDT). In NDT, the Total Focusing Method (TFM) is regarded as the gold standard for im- age quality. However, TFM requires multiple transmis- sion events (one for each array element), which can be slow for applications demanding very fast image acquisi- tion. Since PWI can generate images of comparable qual- ity with fewer transmissions, it presents a promising solu- tion for such high-speed applications. This study demon- strates how volumetric PWI can be achieved using matrix arrays for testing arbitrarily shaped components, where a coupling medium is required and ultrasound waves are re- fracted on the component surface. This introduces com- plexity in calculating the time delays required to gener- ate a plane wave within the component, a process that is straightforward in a single propagation medium scenario. Additionally, since the computation of those delays re- quires knowledge of the surface shape, we also explore how plane waves can be utilized for fast estimation of the surface shape., This research was supported by the project PID2022- 143271OB-I00, funded by MCIN/AEI /10.13039/501100011033/FEDER, UE., the project PLEC2024-011165, funded by MI- CIU/AEI/10.13039/501100011033/ FEDER, UE, and by the European Commission – NextGenerationEU, through Momentum CSIC Programme: Develop Your Digital Talent. The funding for these actions/grants and contracts comes from the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. G. Cosarinsky staff is hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union’s Next Generation funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cross-Domain Transfer Learning for Segmentation of Lung Ultrasound images

  • Muñoz, Mario
  • Rubio, Adrián
  • Cosarinsky, Guillermo
  • Camacho Sosa-Días, Jorge
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering, joint with the XLVI Spanish Acoustic Conference TECNIACUSTICA 2025, from June 23rd to 26th 2025, Málaga (Spain) 5 páginas, 2 figuras, 1 tabla, Developing deep learning models for lung ultrasound (LUS) segmentation is hindered by limited annotated data. This study demonstrates the effectiveness of cross-domain transfer learning (TL) using ImageNet pre-trained encoders (VGG16, ResNet50, MobileNetV2) within a U-Net architecture. Compared to training from scratch, TL with ResNet50 and VGG16 significantly improved segmentation Dice score (up to 30%). Furthermore, TL allowed reducing the training dataset to 45% while achieving performance comparable to the baseline trained on full data. These findings validate cross-domain TL as a valuable and data- efficient approach for LUS analysis., This research was partially supported by the project PID2022-143271OB-I00, funded by MCIN/AEI /10.13039/501100011033/FEDER, UE; and supported by the European Commission + NextGenerationEU, through Momentum CSIC Programme: Develop Your Digital Talent. The funding for these actions/grants and contracts comes from the European Union's Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government's public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. G. Cosarinsky staff is hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union's Next Generation funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modular and flexible hardware architecture for real-time 3D ultrasound imaging

  • Cruza, Jorge F.
  • Mateos, Raul
  • Bueno, Ricardo
  • Montaldo, Gabriel
  • Camacho Sosa-Días, Jorge
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering, joint with the XLVI Spanish Acoustic Conference TECNIACUSTICA 2025, June 23rd to 26th 2025, Málaga (Spain) 8 páginas, 6 figuras, 2 tablas, Ultrasound 3D imaging with arrays usually requires hardware systems with more active channels than for conventional 2D imaging, which increases systems complexity. Furthermore, it increases the beamforming difficulty, as more image lines have to be generated (3D volume) using more acquired raw signals (A-Scans). Typical approaches to this problem can be divided in hardware and software solutions. In the first, the beamforming process is carried out by a specialized hardware (FPGA, ASIC’s, etc.), with lower power consumption, but also with lower flexibility. On the other hand, software beamformers are very flexible in terms of programming, but they require a much larger bandwidth with the acquisition system. This work presents a modular and flexible hardware architecture for 2D and 3D ultrasound imaging, which combines hardware beamforming capabilities with high-speed links with a processing computer. This approach enables to work with both hardware and software beamformers, taking full advantage of each one of them. A description of the architecture is given, along with the expected performance in terms of hardware processing power and data transfer rate. Finally, application examples are given: Total Focusing Method imaging in non-destructive-testing, and functional ultrasound imaging in the brain for pre-clinical models., Supported by the projects PID2022-143271OB-I00, funded by MCIN/AEI /10.13039/501100011033/FEDER, UE, PLEC2024-011165, funded by MICIU/AEI/10.13039/501100011033/ FEDER, UE, and by TEC-2024/TEC-43, LUNABRAIN-CM, funded by Comunidad de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Deep learning for ultrasound surface echo detection with matrix arrays

  • Larrea, Marcelo
  • Muñoz, Mario
  • Rubio, Adrián
  • Cruza, Jorge F.
  • Cosarinsky, Guillermo
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering, joint with the XLVI Spanish Acoustic Conference TECNIACUSTICA 2025, June 23rd to 26th 2025, Málaga (Spain) 8 páginas, 5 figuras, 1 tabla, In Non-Destructive Testing (NDT), imaging with ar- ray probes is frequently performed in a two propaga- tion medium scenario, where the first acts as a coupling medium, and the second is the object under test. There- fore, the position and shape of the refracting interface be- tween the two mediums must be known in order to com- pute the imaging focal laws. This geometrical information can be inferred from the arrival times of echoes reflected on the object’s surface, which must be identified within the signals. A common approach for detecting these sur- face echoes is the first-threshold crossing method; how- ever, it is susceptible to outliers, and more robust al- ternatives are needed. In a recent work, we developed and trained a 3D Convolutional Neural Network (Deep- Echo3D) using an 11x11 matrix array to accurately and reliably detect surface echoes. While effective, the model is tailored to the specific array used. In this study, we ex- plore extending DeepEcho3D to other matrix arrays with varying shapes and frequencies. Our findings demonstrate that it is unnecessary to start from scratch for each new ar- ray; instead, we can leverage transfer learning from the initial model., This research was supported by the project PID2022- 143271OB-I00, funded by MCIN/AEI /10.13039/501100011033/FEDER, UE., the project PLEC2024-011165, funded by MI- CIU/AEI/10.13039/501100011033/ FEDER, UE, and by the European Commission – NextGenerationEU, through Momentum CSIC Programme: Develop Your Digital Talent. The funding for these actions/grants and contracts comes from the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. G. Cosarinsky staff is hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union’s Next Generation funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hardware acceleration of Convolutional Neural Network for Lung Ultrasound segmentation

  • Rubio, Adrián
  • Muñoz, Mario
  • Cosarinsky, Guillermo
  • Cruza, Jorge F.
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering, joint with the XLVI Spanish Acoustic Conference TECNIACUSTICA 2025, June 23rd to 26th 2025, Málaga (Spain) 5 páginas, 4 figuras, 1 tabla, Lung Ultrasound (LUS) imaging is a valuable diagnostic technique for lung condition evaluation, due to its non-ionizing and portable nature. However, its complex interpretation can be enhanced by Machine Learning (ML) tools, yet traditional solutions often fail to meet the speed demands of real-time applications. This paper presents a Field Programmable Gate Array (FPGA)-based hardware solution for real-time segmentation of lung ultrasound images using a Convolutional Neural Network (CNN), achieving a throughput of 80 inferences per second., Supported by the European Commission + NextGen- erationEU, through Momentum CSIC Programme: Develop Your Digital Talent. The funding for these actions/grants and contracts comes from the European Union’s Recovery and Resilience Facility-Next Gener- ation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. G. Cosarinsky staff is hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and train- ing contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union’s Next Generation funds. Supported by the project PID2022-143271OB-I00, funded by MCIN/AEI /10.13039/501100011033/FEDER, UE., Peer reviewed