Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laboratory test cells for evaluate the real performance of precast concrete façade with PCM

  • Tenorio Ríos, José Antonio
  • Marcos, Ana
  • Guerrero Delgado, M. Carmen
  • Sánchez-Ramos, José
  • Álvarez, Servando
  • Cabeza, Luisa F.
Trabajo presentado al Eurotherm Seminar #112: Advances in Thermal Energy Storage, celebrado en la Universitat de Lleida del 15 al 17 de mayo de 2019., The Inphase project proposes the development of a precast concrete façade with incorporated Phase Changing Materials (PCMs) for residential buildings¿ envelopes, taking advantage of the latent thermal storage capacity of the latter in order to improve the overall performance of the building. The solution is based in layers of mortars and slurries for incorporation in precast building components actively controlled by means of an integrated hydronic radiant system. In order to evaluate the performance of different solutions, an experimental infrastructure was developed with laboratory test cells with increasing amounts of microencapsulated PCM (0%, 9%, 19%, 24% and 32%) proportions in relation to the total volume of PCM containing concrete. The temperature of the system is modified and controlled through an active water installation and measured at different points of the testing blocks and pipes, providing an in-depth analysis of the dynamic response of the system. The idea is to be able to activate or control the thermal inertia of the material at will for the development of the experiment as well as future applications. The models were devised to be monitored in order to obtain a detailed study of their thermal properties and performance, such as temperature profiles, heat flux, dampening or phase shift. This information will later be used to validate the simulation model, which enables the digital analysis of a building with these materials incorporated as part of its envelope, INPHASE project (RTC-2015-3583-5) has been founded by the Ministry of Economy and Competitiveness within the National Programme for Research Aimed at the Challenges of Society, included in the framework of the Spanish National Plan for Scientific and Technical Research and Innovation 2013-2016, and has been co-financed by the European Regional Development Fund (ERDF), with the aim of promoting technological development, innovation and quality research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of cementitious mortars incorporating PCMs for radiant heating and cooling systems

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
  • Revuelta Crespo, David
  • Navarro, Lidia
  • Cabeza, Luisa F.
Trabajo presentado a la International Conference on Construction Research / Eduardo Torroja: Architecture, Engineering, Concrete (AEC), celebrada en el Instituto de Ciencias de la Construcción Eduardo Torroja (IETCC-CSIC) del 21 al 23 de noviembre de 2018., [ES]: Las estrategias centradas en lograr el confort térmico en edificios, al tiempo que se reduce la demanda energética en calefacción, ventilación y refrigeración (HVAC por sus siglas en inglés), como los Sistemas de Almacenamiento de Energía Térmica (TES por sus siglas en inglés) o los de Estructuras Termoactivas (TABS por sus siglas en inglés), han ganado interés demostrando un gran potencial. La activación térmica de los componentes de un edificio ha demostrado ser una opción viable para la reducción de la demanda energética de los edificios debido principalmente a su funcionamiento a baja temperatura y la alta inercia térmica que permite recortar los picos de temperatura máxima y desplazar el consumo de energía a períodos de bajo costo. Este trabajo presenta los resultados obtenidos en el desarrollo de materiales cementicos con incorporación de Materiales de Cambio de Fase (PCM por sus siglas en inglés) que, en combinación con los TABS, pueden resultar en una mejora del confort térmico de los edificios y al mismo tiempo en una reducción del consumo de energía en HVAC., [EN]: Strategies focused on achieving thermal comfort in buildings, while reducing heating, ventilation and air conditioning (HVAC) energy demand, such as Thermal Energy Storage (TES) systems and Thermally Activated Building Systems (TABS), have gained interest proving high energy savings potential. The thermal mass activation of building components has proved to be a viable option for energy use reduction in buildings mainly due to its low temperature operation and the high thermal inertia that enables shaving peak loads and shifting energy consumption to low energy cost periods. This works presents the results obtained in the development of cementitious mortars incorporating Phase Change Materials (PCM) that, in combination with TABS might result in an improvement of the thermal comfort in buildings and at the same time in a reduction of the HVAC energy consumption., Parte de las investigaciones en este trabajo han sido financiadas por el Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, dentro del proyecto “INPHASE (RTC-2015-3583-5).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Micro-encapsulated PCM in concrete matrix after a decade of the building construction

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Universidad de Çukurova (Turquía) del 25 al 28 de abril de 2018., The reduction of the energy consumed in the building sector is no more a recommendation, but a duty of our society. Thermal energy storage (TES) implementation into buildings envelope has been highlighted as a promising technology to reduce the energy demand in buildings. Last decade, many literature have been dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia. Several studies focused on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them focused on the long stability properties of the materials with embedded PCM when included in a building, since the lifetime of a building last around 50 years. In this study, an evaluation of a house-like cubicle of concrete with micro-encapsulated PCM after a decade of its construction is done. The results of this study were compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), ULLE10-4E-1305, and ENE2005-08256-C02-01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.