Pasar al contenido principal

TECNOLOGIAS DE AGRICULTURA DE PRECISION PARA OPTIMIZAR EL MANEJO DEL DOSEL FOLIAR Y LA PROTECCION FITOSANITARIA SOSTENIBLE EN PLANTACIONES FRUTALES

RTI2018-094222-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

NDVI from satellite images to estimate LiDAR-derived geometric and structural parameters in super-intensive almond orchards

  • Martínez Casasnovas, José Antonio
  • Llorens Calveras, Jordi
  • Sandonís Pozo, Leire
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
The present work tries to bridge a gap about the estimation of geometric and structural orchard parameters (LiDAR-derived) from vegetation indices from satellites. The maximum height and width, the cross-sectional area and the porosity were measured along the rows in a super-intensive almond (Prunus dulcis) orchard every 0.5 m by means of a Velodyne VLP16 LiDAR sensor. These parameters were interpolated to the pixel centroids of PlanetScope and Sentinel-2 and correlated with the normalized difference vegetation index (NDVI) from both platforms. The highest correlations were obtained between the NDVI of PlanetScope images and the cross-sectional area of the almond trees (R=0.72) and with the maximum width of the cross-sections (R=0.71). The results can be useful to estimate important canopy geometric parameters for site-specific management of orchards., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00). The authors thank the Copernicus program for the use of Sentinel-2 images and Planet Labs Inc. for the use of PlanetScope images under the Educational and Research License agreement with the Universitat de Lleida.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Estimation of geometric and structural parameters in a super-intensive almond (Prunus dulcis) orchard from multispectral vegetation indices derived from UAV-based imagery

  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Casañas, E.
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Martínez Casasnovas, José Antonio
Canopy geometric and structural parameters in a super-intensive almond (Prunus dulcis) orchard were estimated from multispectral vegetation indices from very high-resolution UAV images (0.07 m/pixel). As ground truth data, the canopy geometric and structural parameters were extracted from a 3D LiDAR point cloud. These data were summarized every 0.5 m along the tree rows. The vegetation indices CCCI, NDRE, NDVI, GNDVI and WDRVI were calculated and summarized at the same points as the LiDAR data. The highest correlations (R>0.70) were obtained between the NDVI and the maximum width and the cross-sectional area. The porosity was negatively correlated (R=-0.59) with the NDVI. This research opens the opportunity of using remotely sensed vegetation indices to estimate canopy geometric and structural parameters in addition to vigour for precise canopy management., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

PlanetScope Vegetation Indices to Estimate UAV and LiDAR-derived Canopy Parameters in a Super-Intensive Almond Orchard

  • Sandonís Pozo, Leire
  • Plata Moreno, José Manuel
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Pascual Roca, Miquel
  • Martínez Casasnovas, José Antonio
The continuous monitoring of geometric and structural parameters is a key aspect in sustainable and accurate orchard management. Although LiDAR and UAV photogrammetry are widely used to measure canopy architecture, there is still a gap to bridge in the development of software to process this information. The present work tries to estimate the maximum height and width in a hedgerow fruit tree orchard from PlanetScope vegetation indices (NDVI and GNDVI). To analyze the correspondence between geometric parameters and the vegetation indices, LiDAR and UAV point clouds were acquired on two 2021 dates in a super-intensive almond orchard: after mechanical pruning (June) and before harvesting (September). The 3D point clouds were summarized every 0.5 m and the maximum width and height along the rows were calculated and interpolated by means of block kriging to the pixel centroids of the PlanetScope image. These maps were later classified using a k means algorithm in two classes. Results indicate that the NDVI was the best performing index in estimation of maximum height and width on the two analyzed dates. GNDVI obtained its best results in September, when vegetation was fully developed. In conclusion, these vegetation indices could be useful for monitoring canopy geometry in this type of orchard, in particular to decide about pruning intensity., This work is a result of the RTI2018-094222-B-I00 project (PAgFRUIT), granted by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union. The authors also thank Planet Labs Inc. for the use of PlanetScope images under an Educational and Research License agreement; Alrasa Agraria S.L. (Raimat, Spain), the Centre for Technological and Industrial Development (Ministry of Science and Innovation, Spanish Government) and EuroChem Iberia S.A., for providing experimental facilities and/or funds.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

R software code to process and extract information from 3D Lidar point clouds

  • Llorens Calveras, Jordi
  • Cabrera Pérez, Carlos
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
Poster Proceedings of the 12th European Conference on Precision Agriculture, July 8-11, Montpellier, France. pp. 114-115. e-book publication. SupAgro Montpellier. ISBN 978-2-900792-49-0, In the process of electronic canopy characterization, it is necessary to process efficiently point clouds obtained by means of sensors or other capturing information systems. These point clouds may have different origin but they define the main structural characteristics of the scanned crop. For this reason, a fast, easy-to-configure and precise methodology is necessary to extract such information. The work presented in this poster defines the main features of a procedure carried out with R Software code., This work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness under Grants 2017 SGR 646, AGL2013-48297-C2-2-R and RTI2018-094222-B-I00(PAgFRUIT). The work of Jordi Llorens was supported by Spanish Ministry of Economy, Industry and Competitiveness through a postdoctoral position named Juan de la Cierva Incorporació (JDCI-2016-29464_N18003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Apple size estimation using photogrammetry-derived 3D point clouds

  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Escolà i Agustí, Alexandre
  • Gregorio López, Eduard
In-field fruit monitoring at different growth stages provides important information for farmers. Recent advances have focused on the detection and location of fruits, although the development of accurate fruit size estimation systems is still a challenge that requires further attention. The present work proposes a novel methodology for in-field measurement of spherical fruits using SfMMVS- based point clouds and considering different percentages of fruit occlusions., This work was partly funded by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (grant RTI2018- 094222-B-I00[PAgFRUIT project] by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Multi-beam LiDAR-derived data analysis for optimal canopy 3D monitoring in super-intensive almond (Prunus dulcis) orchards

  • Llorens Calveras, Jordi
  • Alsina Tehàs, Albert
  • Arnó Satorra, Jaume
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
An analysis of data obtained by a LiDAR sensor was carried out. The sensor uses 16 laser beams and was moved along super-intensive almond orchard alleyways to obtain a 3D point cloud. Different beam combinations were used to obtain three geometrical crop parameters: canopy height, width and cross-sectional area. The parameters were computed using a single central beam, a combination of the two outer beams and all 16 beams. The results showed statistically significant differences in width and cross-sectional area when using one, two or sixteen beams. The more the laser beams considered, the larger the canopy width and cross-sectional area. 28-33% larger width was obtained in comparison to the central beam whereas the cross-sectional area was doubled when all beams were considered., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00). Also this work was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017-SGR-646.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Assessment of different N treatments in Hedgerow Almond Orchards by means of LiDAR point clouds

  • Sandonís Pozo, Leire
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Pascual Roca, Miquel
  • Martínez Casasnovas, José Antonio
Monitoring of canopy status in fruit tree orchards allows better decisions in the canopy management, such as pruning or fertirrigation. LiDAR is an effective tool to acquire accurate 3D geometric and structural data, such as height, width, volume or canopy porosity, among others. In the present work, a super-intensive almond orchard (Prunus Dulcis) with 8 different N treatments (N50, N100, N150, NStop: N100 only in Fase I and with and without DMPSA nitrification inhibitor in 24 rows and 3 blocks, was scanned during three years (2019-21) in two different vegetative stages (after spring pruning and before harvesting) by means of a terrestrial LiDAR scanner. Canopy parameters such maximum height and width, cross section and porosity were summarized from the LiDAR 3D point cloud every 0.5 m along the almond tree hedgerows. A repeated measure mixed statistical model was applied to each parameter in order to assess the effect of the N treatments. The adjusted R2 ranged from 0.73 of the canopy width to 0.83 of the porosity. Canopy parameters and their main interactions with the different treatments were significantly differentiated. The N100+DMPSA treatment was the one favoring higher canopy development (higher cross sections and widths, and less porosity), while the NStop+DMPSA treatment was related to lower canopy development and higher porosity., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222 -B-I00). Also this work was supported by Secretaria d’Universitats i Recercadel del Departament d’Empresa i Coneixement de la Generalitat Generalitat de Catalunya under Grant 2017-SGR-646.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Análisis del dosel foliar de setos olivo mediante LiDAR y su relación con la productividad y atributos de calidad del aceite

  • Sandonís Pozo, Leire
  • Arnó Satorra, Jaume
  • Rufat i Lamarca, Josep
  • Villar Mir, Josep Ma.
  • Martínez Casasnovas, José Antonio
  • Pascual Roca, Miquel
La gestión del cultivo del olivo, particularmente en condiciones superintensivas, es clave para alcanzar la productividad y la calidad del aceite necesarias para mantener las expectativas económicas de las explotaciones. En este sentido, los sensores LiDAR (Light Detection And Ranging) pueden aportar la información necesaria para cuantificar las características geométricas y estructurales del dosel foliar de las plantaciones. El presente trabajo se ha realizado en una plantación comercial superintensiva de olivo, variedad “Arbequina”, en la que se diseñó un experimento con diferentes dosis de nitrógeno y de riego (desde condiciones deficitarias en diferentes períodos hasta riego completo), cruzado con dosis de N subóptimas y suficientes. Los resultados obtenidos del análisis LiDAR permiten estimar adecuadamente el volumen de los árboles y la porosidad del dosel, pudiendo relacionar estos indicadores con diversos e importantes atributos cuantitativos (producción, crecimiento vegetativo y frondosidad del seto), y cualitativos del aceite obtenido (MUFA, PUFA, estabilidad, polifenoles y esteroles)., Este trabajo ha sido financiado por el Ministerio de Ciencia, Innovación y Universidades a través del Proyecto PAgFRUIT (RTI 2018 -094222 -B-I00).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metodología para el análisis de los errores y validación de nubes de puntos 3D obtenidas en campo para la caracterización de la arquitectura de árboles frutales

  • Lavaquiol Colell, Bernat
  • Llorens Calveras, Jordi
  • Sanz Cortiella, Ricardo
  • Gené Mola, Jordi
  • Arnó Satorra, Jaume
  • Gregorio López, Eduard
  • Escolà i Agustí, Alexandre
El estudio de la estructura de la planta (índice de área foliar, porosidad del dosel, densidad foliar, arquitectura leñosa y sistema de entrenamiento) y de su geometría (tamaño, forma y volumen) es básico para realizar un manejo óptimo del cultivo. Antes de la introducción de los sensores 3D, la caracterización precisa de cultivos en 3D era una tarea muy laboriosa que resultaba inviable en grandes cultivos comerciales. Sin embargo, la introducción de nuevos sensores 3D ha supuesto una oportunidad para realizar esta tarea de una forma relativamente sencilla y rápida. Antes de utilizar un sistema de escaneo 3D para caracterizar el dosel, es fundamental conocer su error de medición o precisión. En esta investigación proponemos una metodología para evaluar la precisión de los sensores LiDAR comparando las nubes de puntos 3D basadas en LiDAR con un modelo digital de Ground-Truth (DGT) generado mediante la aplicación de técnicas de fotogrametría. La nube de puntos 3D de la DGT se obtuvo a partir de 288 fotografías de la escena que incluye el árbol Ground-Truth (Malus domestica Bork). La nube de puntos resultante tiene un sesgo de - 0,15 mm de diámetro y 0,05 mm de longitud, por lo que se puede considerar que la DGT representa fielmente la realidad. Este DGT es utilizado posteriormente para validar la nube de puntos generada por un sistema mobile terrestrial laser scanner (MTLS) compuesto por un sensor VLP-16 Velodyne LiDAR sincronizado con un sistema de posicionamiento GNSS-RTK. El MTLS se condujo a velocidades de 0,14 m/s y 0,55 m/s. Se obtuvo un error promedio de 4,3 cm y 4,4 cm, respectivamente. El número de puntos obtenidos a 0,14 m/s fue de 50 051 puntos y a 0,55 m/s de 12 503 puntos. A pesar de tener un error de medición bajo cuando se escanea a ambas velocidades, se obtiene una densidad de puntos óptima cuando se escanea a 0,14 m/s y pobre cuando se escanea a 0,55 m/s. De estos resultados se concluye que el error obtenido con el sensor Velodyne VLP-16 se considera aceptable en aplicaciones agronómicas., This research was funded by the Spanish Ministry of Economy and Competitiveness and the Ministry of Science, Innovation and Universities through the program Plan Estatal I+D+i Orientada a los Retos de la Sociedad, Project PAgFRUIT RTI2018-094222-B-I00.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Aplicaciones de la teledetección en la caracterización de frutales y en la fertilización de cultivos extensivos

  • Martínez Casasnovas, José Antonio
  • Arnó Satorra, Jaume
  • Daniele, Elisa
  • Escolà i Agustí, Alexandre
  • Sandonís Pozo, Leire
  • Llorens Calveras, Jordi
  • Rosell Polo, Joan Ramon
  • Uribeetxebarria Alonso de Armiño, Asier
Proyecto AgVANCE (AGL2013‐48297‐C2‐2‐R), Proyecto PAgFRUIT (RTI2018‐094222‐B‐I00)
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and 3D location using instance segmentation neural networks and SfM photogrammetry

  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Morros Rubió, Josep Ramon
  • Ruiz Hidalgo, Javier
  • Vilaplana Besler, Verónica
  • Gregorio López, Eduard
The development of remote fruit detection systems able to identify and 3D locate fruits provides opportunities to improve the effi-ciency of agriculture management. Most of the current fruit detec-tion systems are based on 2D image analysis. Although the use of 3D sensors is emerging, precise 3D fruit location is still a pending issue. This work presents a new methodology for fruit detection and 3D location, combining the use of instance segmentation neu-ral networks and Structure-from-Motion (SfM) photogrammetry., This work was partly funded by the Secretaria d’Universitats i Recerca de la Gener-alitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00). The Spanish Ministry of Education is thanked for Mr. J. Gené’s pre-doctoral fellowships (FPU15/03355).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and sizing using photonic sensors and artificial intelligence

  • Gené Mola, Jordi
  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Education and the Spanish Ministry of Science, Innovation and Universities are thanked the pre-doctoral fellowships 2016FI_B00669, FPU15/03355 and EST18/00487, respectively. The Spanish Ministry of Universities is thanked for the posdoctoral Margarita Salas grant given to Jordi Gené, funded by the European Union-Next Generation EU. The research work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2017SGR646), the Spanish Ministry of Economy and Competitiveness (project AGL2013-48297-C2-2-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A new Leafiness-LiDAR index to estimate light interception in intensive olive orchards

  • Sandonís Pozo, Leire
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
The 14th European Conference on Precision Agriculture, July 2-6, 2023, Bologna, Italy, Canopy light interception constitutes an important yield limiting factor in high density olive orchards. However, its characterisation still implies laborious measurements. A new index, the Leafiness-LiDAR index (LLI), is presented as a LAI estimator. LLI combines LiDAR-derived parameters: Cross-Section and Leafiness from 3D point clouds. To validate the results, photosynthetically active radiation (PAR) measurements, canopy volume, yield and quality parameters were collected and analysed. LLI showed significant correlations both with PAR and canopy volume (r = 0.8) and quality parameters (r = -0.6). LLI may be useful as an early decision canopy monitoring tool in the framework of Precision Fructiculture., This work was carried out with data acquired in the project IRTA2012-00059-C02-01 funded by the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, as well as in the projects AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R funded by the Spanish Ministry of Economy and Competitiveness and developed under the frame of the grants RTI2018-094222-B-I00 (PAgFRUIT project) and PID2021-126648OB-I00 (PAgPROTECT project) by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Manejo de malas hierbas bajo la línea del viñedo mediante acolchados orgánicos y su efecto sobre el vigor del cultivo

  • Cabrera Pérez, Carlos
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Royo-Esnal, Aritz
  • Recasens i Guinjuan, Jordi
En una parcela de viñedo de Raimat (Lleida) cv. ‘Chardonnay’ se estudió, durante la campaña 2019, el efecto de cuatro estrategias de manejo de malas hierbas bajo las cepas: 1) laboreo con intercepas, 2) pases de segadora, 3) acolchado de cáscaras de almendra y 4) acolchado de astillas de pino. Además de la presencia de malas hierbas bajo la línea, se estimó, en nueve cepas distintas y para cada manejo, la longitud de los sarmientos, el potencial hídrico de tallo, el rendimiento y el peso de poda. A su vez, en el mes de julio y agosto se escaneó la parcela con un escáner láser móvil terrestre equipado con sensores LiDAR para la medición del dosel foliar como indicador de vigor. La presencia de malas hierbas fue significativamente menor en los acolchados que en los otros manejos coincidiendo también con diferencias significativas en los otros parámetros. Con acolchados las cepas mostraron mayores valores de longitud de sarmientos, rendimiento, peso de poda y mejor estado hídrico. El sistema basado en LiDAR confirmó estas diferencias a nivel de dosel foliar. Los resultados demuestran que el uso de acolchados orgánicos permite reducir la presencia de malas hierbas y favorecer el vigor de las cepas., Trabajo desarrollado con la financiación de la Agencia Española de Investigación (AEI) con los proyectos AGL2017-83325-C4-2-R y RTI2018-094222-B-I00.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Low-cost terrestrial photogrammetry for orchard sidewards 3D reconstruction

  • Martínez Casasnovas, José Antonio
  • Rosell Tarragó, Miquel
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Arnó Satorra, Jaume
  • Plata Moreno, José Manuel
  • Escolà i Agustí, Alexandre
The present study was part of the grants RTI2018-094222-B-I00 and PID2021-126648OB-I00 (PAgFRUIT and PAgPROTECT projects), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

NDVI from satellite images to estimate LiDAR-derived geometric and structural parameters in super-intensive almond orchards

  • Martínez Casasnovas, José Antonio
  • Llorens Calveras, Jordi
  • Sandonís Pozo, Leire
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
The present work tries to bridge a gap about the estimation of geometric and structural orchard parameters (LiDAR-derived) from vegetation indices from satellites. The maximum height and width, the cross-sectional area and the porosity were measured along the rows in a super-intensive almond (Prunus dulcis) orchard every 0.5 m by means of a Velodyne VLP16 LiDAR sensor. These parameters were interpolated to the pixel centroids of PlanetScope and Sentinel-2 and correlated with the normalized difference vegetation index (NDVI) from both platforms. The highest correlations were obtained between the NDVI of PlanetScope images and the cross-sectional area of the almond trees (R=0.72) and with the maximum width of the cross-sections (R=0.71). The results can be useful to estimate important canopy geometric parameters for site-specific management of orchards., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00). The authors thank the Copernicus program for the use of Sentinel-2 images and Planet Labs Inc. for the use of PlanetScope images under the Educational and Research License agreement with the Universitat de Lleida.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and 3D location using instance segmentation neural networks and SfM photogrammetry

  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Morros Rubió, Josep Ramon
  • Ruiz Hidalgo, Javier
  • Vilaplana Besler, Verónica
  • Gregorio López, Eduard
The development of remote fruit detection systems able to identify and 3D locate fruits provides opportunities to improve the effi-ciency of agriculture management. Most of the current fruit detec-tion systems are based on 2D image analysis. Although the use of 3D sensors is emerging, precise 3D fruit location is still a pending issue. This work presents a new methodology for fruit detection and 3D location, combining the use of instance segmentation neu-ral networks and Structure-from-Motion (SfM) photogrammetry., This work was partly funded by the Secretaria d’Universitats i Recerca de la Gener-alitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00). The Spanish Ministry of Education is thanked for Mr. J. Gené’s pre-doctoral fellowships (FPU15/03355).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multi-beam LiDAR-derived data analysis for optimal canopy 3D monitoring in super-intensive almond (Prunus dulcis) orchards

  • Llorens Calveras, Jordi
  • Alsina Tehàs, Albert
  • Arnó Satorra, Jaume
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
An analysis of data obtained by a LiDAR sensor was carried out. The sensor uses 16 laser beams and was moved along super-intensive almond orchard alleyways to obtain a 3D point cloud. Different beam combinations were used to obtain three geometrical crop parameters: canopy height, width and cross-sectional area. The parameters were computed using a single central beam, a combination of the two outer beams and all 16 beams. The results showed statistically significant differences in width and cross-sectional area when using one, two or sixteen beams. The more the laser beams considered, the larger the canopy width and cross-sectional area. 28-33% larger width was obtained in comparison to the central beam whereas the cross-sectional area was doubled when all beams were considered., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00). Also this work was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017-SGR-646.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Análisis del dosel foliar de setos olivo mediante LiDAR y su relación con la productividad y atributos de calidad del aceite

  • Sandonís Pozo, Leire
  • Arnó Satorra, Jaume
  • Rufat i Lamarca, Josep
  • Villar Mir, Josep Ma.
  • Martínez Casasnovas, José Antonio
  • Pascual Roca, Miquel
La gestión del cultivo del olivo, particularmente en condiciones superintensivas, es clave para alcanzar la productividad y la calidad del aceite necesarias para mantener las expectativas económicas de las explotaciones. En este sentido, los sensores LiDAR (Light Detection And Ranging) pueden aportar la información necesaria para cuantificar las características geométricas y estructurales del dosel foliar de las plantaciones. El presente trabajo se ha realizado en una plantación comercial superintensiva de olivo, variedad “Arbequina”, en la que se diseñó un experimento con diferentes dosis de nitrógeno y de riego (desde condiciones deficitarias en diferentes períodos hasta riego completo), cruzado con dosis de N subóptimas y suficientes. Los resultados obtenidos del análisis LiDAR permiten estimar adecuadamente el volumen de los árboles y la porosidad del dosel, pudiendo relacionar estos indicadores con diversos e importantes atributos cuantitativos (producción, crecimiento vegetativo y frondosidad del seto), y cualitativos del aceite obtenido (MUFA, PUFA, estabilidad, polifenoles y esteroles)., Este trabajo ha sido financiado por el Ministerio de Ciencia, Innovación y Universidades a través del Proyecto PAgFRUIT (RTI 2018 -094222 -B-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

R software code to process and extract information from 3D Lidar point clouds

  • Llorens Calveras, Jordi
  • Cabrera Pérez, Carlos
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
Poster Proceedings of the 12th European Conference on Precision Agriculture, July 8-11, Montpellier, France. pp. 114-115. e-book publication. SupAgro Montpellier. ISBN 978-2-900792-49-0, In the process of electronic canopy characterization, it is necessary to process efficiently point clouds obtained by means of sensors or other capturing information systems. These point clouds may have different origin but they define the main structural characteristics of the scanned crop. For this reason, a fast, easy-to-configure and precise methodology is necessary to extract such information. The work presented in this poster defines the main features of a procedure carried out with R Software code., This work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness under Grants 2017 SGR 646, AGL2013-48297-C2-2-R and RTI2018-094222-B-I00(PAgFRUIT). The work of Jordi Llorens was supported by Spanish Ministry of Economy, Industry and Competitiveness through a postdoctoral position named Juan de la Cierva Incorporació (JDCI-2016-29464_N18003).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

PlanetScope Vegetation Indices to Estimate UAV and LiDAR-derived Canopy Parameters in a Super-Intensive Almond Orchard

  • Sandonís Pozo, Leire
  • Plata Moreno, José Manuel
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Pascual Roca, Miquel
  • Martínez Casasnovas, José Antonio
The continuous monitoring of geometric and structural parameters is a key aspect in sustainable and accurate orchard management. Although LiDAR and UAV photogrammetry are widely used to measure canopy architecture, there is still a gap to bridge in the development of software to process this information. The present work tries to estimate the maximum height and width in a hedgerow fruit tree orchard from PlanetScope vegetation indices (NDVI and GNDVI). To analyze the correspondence between geometric parameters and the vegetation indices, LiDAR and UAV point clouds were acquired on two 2021 dates in a super-intensive almond orchard: after mechanical pruning (June) and before harvesting (September). The 3D point clouds were summarized every 0.5 m and the maximum width and height along the rows were calculated and interpolated by means of block kriging to the pixel centroids of the PlanetScope image. These maps were later classified using a k means algorithm in two classes. Results indicate that the NDVI was the best performing index in estimation of maximum height and width on the two analyzed dates. GNDVI obtained its best results in September, when vegetation was fully developed. In conclusion, these vegetation indices could be useful for monitoring canopy geometry in this type of orchard, in particular to decide about pruning intensity., This work is a result of the RTI2018-094222-B-I00 project (PAgFRUIT), granted by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union. The authors also thank Planet Labs Inc. for the use of PlanetScope images under an Educational and Research License agreement; Alrasa Agraria S.L. (Raimat, Spain), the Centre for Technological and Industrial Development (Ministry of Science and Innovation, Spanish Government) and EuroChem Iberia S.A., for providing experimental facilities and/or funds.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and sizing using photonic sensors and artificial intelligence

  • Gené Mola, Jordi
  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Education and the Spanish Ministry of Science, Innovation and Universities are thanked the pre-doctoral fellowships 2016FI_B00669, FPU15/03355 and EST18/00487, respectively. The Spanish Ministry of Universities is thanked for the posdoctoral Margarita Salas grant given to Jordi Gené, funded by the European Union-Next Generation EU. The research work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2017SGR646), the Spanish Ministry of Economy and Competitiveness (project AGL2013-48297-C2-2-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A new Leafiness-LiDAR index to estimate light interception in intensive olive orchards

  • Sandonís Pozo, Leire
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
The 14th European Conference on Precision Agriculture, July 2-6, 2023, Bologna, Italy, Canopy light interception constitutes an important yield limiting factor in high density olive orchards. However, its characterisation still implies laborious measurements. A new index, the Leafiness-LiDAR index (LLI), is presented as a LAI estimator. LLI combines LiDAR-derived parameters: Cross-Section and Leafiness from 3D point clouds. To validate the results, photosynthetically active radiation (PAR) measurements, canopy volume, yield and quality parameters were collected and analysed. LLI showed significant correlations both with PAR and canopy volume (r = 0.8) and quality parameters (r = -0.6). LLI may be useful as an early decision canopy monitoring tool in the framework of Precision Fructiculture., This work was carried out with data acquired in the project IRTA2012-00059-C02-01 funded by the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, as well as in the projects AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R funded by the Spanish Ministry of Economy and Competitiveness and developed under the frame of the grants RTI2018-094222-B-I00 (PAgFRUIT project) and PID2021-126648OB-I00 (PAgPROTECT project) by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessment of different N treatments in Hedgerow Almond Orchards by means of LiDAR point clouds

  • Sandonís Pozo, Leire
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Pascual Roca, Miquel
  • Martínez Casasnovas, José Antonio
Monitoring of canopy status in fruit tree orchards allows better decisions in the canopy management, such as pruning or fertirrigation. LiDAR is an effective tool to acquire accurate 3D geometric and structural data, such as height, width, volume or canopy porosity, among others. In the present work, a super-intensive almond orchard (Prunus Dulcis) with 8 different N treatments (N50, N100, N150, NStop: N100 only in Fase I and with and without DMPSA nitrification inhibitor in 24 rows and 3 blocks, was scanned during three years (2019-21) in two different vegetative stages (after spring pruning and before harvesting) by means of a terrestrial LiDAR scanner. Canopy parameters such maximum height and width, cross section and porosity were summarized from the LiDAR 3D point cloud every 0.5 m along the almond tree hedgerows. A repeated measure mixed statistical model was applied to each parameter in order to assess the effect of the N treatments. The adjusted R2 ranged from 0.73 of the canopy width to 0.83 of the porosity. Canopy parameters and their main interactions with the different treatments were significantly differentiated. The N100+DMPSA treatment was the one favoring higher canopy development (higher cross sections and widths, and less porosity), while the NStop+DMPSA treatment was related to lower canopy development and higher porosity., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222 -B-I00). Also this work was supported by Secretaria d’Universitats i Recercadel del Departament d’Empresa i Coneixement de la Generalitat Generalitat de Catalunya under Grant 2017-SGR-646.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation of geometric and structural parameters in a super-intensive almond (Prunus dulcis) orchard from multispectral vegetation indices derived from UAV-based imagery

  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Casañas, E.
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Martínez Casasnovas, José Antonio
Canopy geometric and structural parameters in a super-intensive almond (Prunus dulcis) orchard were estimated from multispectral vegetation indices from very high-resolution UAV images (0.07 m/pixel). As ground truth data, the canopy geometric and structural parameters were extracted from a 3D LiDAR point cloud. These data were summarized every 0.5 m along the tree rows. The vegetation indices CCCI, NDRE, NDVI, GNDVI and WDRVI were calculated and summarized at the same points as the LiDAR data. The highest correlations (R>0.70) were obtained between the NDVI and the maximum width and the cross-sectional area. The porosity was negatively correlated (R=-0.59) with the NDVI. This research opens the opportunity of using remotely sensed vegetation indices to estimate canopy geometric and structural parameters in addition to vigour for precise canopy management., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the project PAgFRUIT (RTI2018-094222-B-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Manejo de malas hierbas bajo la línea del viñedo mediante acolchados orgánicos y su efecto sobre el vigor del cultivo

  • Cabrera Pérez, Carlos
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Royo-Esnal, Aritz
  • Recasens i Guinjuan, Jordi
En una parcela de viñedo de Raimat (Lleida) cv. ‘Chardonnay’ se estudió, durante la campaña 2019, el efecto de cuatro estrategias de manejo de malas hierbas bajo las cepas: 1) laboreo con intercepas, 2) pases de segadora, 3) acolchado de cáscaras de almendra y 4) acolchado de astillas de pino. Además de la presencia de malas hierbas bajo la línea, se estimó, en nueve cepas distintas y para cada manejo, la longitud de los sarmientos, el potencial hídrico de tallo, el rendimiento y el peso de poda. A su vez, en el mes de julio y agosto se escaneó la parcela con un escáner láser móvil terrestre equipado con sensores LiDAR para la medición del dosel foliar como indicador de vigor. La presencia de malas hierbas fue significativamente menor en los acolchados que en los otros manejos coincidiendo también con diferencias significativas en los otros parámetros. Con acolchados las cepas mostraron mayores valores de longitud de sarmientos, rendimiento, peso de poda y mejor estado hídrico. El sistema basado en LiDAR confirmó estas diferencias a nivel de dosel foliar. Los resultados demuestran que el uso de acolchados orgánicos permite reducir la presencia de malas hierbas y favorecer el vigor de las cepas., Trabajo desarrollado con la financiación de la Agencia Española de Investigación (AEI) con los proyectos AGL2017-83325-C4-2-R y RTI2018-094222-B-I00.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Apple size estimation using photogrammetry-derived 3D point clouds

  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Escolà i Agustí, Alexandre
  • Gregorio López, Eduard
In-field fruit monitoring at different growth stages provides important information for farmers. Recent advances have focused on the detection and location of fruits, although the development of accurate fruit size estimation systems is still a challenge that requires further attention. The present work proposes a novel methodology for in-field measurement of spherical fruits using SfMMVS- based point clouds and considering different percentages of fruit occlusions., This work was partly funded by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (grant RTI2018- 094222-B-I00[PAgFRUIT project] by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Aplicaciones de la teledetección en la caracterización de frutales y en la fertilización de cultivos extensivos

  • Martínez Casasnovas, José Antonio
  • Arnó Satorra, Jaume
  • Daniele, Elisa
  • Escolà i Agustí, Alexandre
  • Sandonís Pozo, Leire
  • Llorens Calveras, Jordi
  • Rosell Polo, Joan Ramon
  • Uribeetxebarria Alonso de Armiño, Asier
Proyecto AgVANCE (AGL2013‐48297‐C2‐2‐R), Proyecto PAgFRUIT (RTI2018‐094222‐B‐I00)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metodología para el análisis de los errores y validación de nubes de puntos 3D obtenidas en campo para la caracterización de la arquitectura de árboles frutales

  • Lavaquiol Colell, Bernat
  • Llorens Calveras, Jordi
  • Sanz Cortiella, Ricardo
  • Gené Mola, Jordi
  • Arnó Satorra, Jaume
  • Gregorio López, Eduard
  • Escolà i Agustí, Alexandre
El estudio de la estructura de la planta (índice de área foliar, porosidad del dosel, densidad foliar, arquitectura leñosa y sistema de entrenamiento) y de su geometría (tamaño, forma y volumen) es básico para realizar un manejo óptimo del cultivo. Antes de la introducción de los sensores 3D, la caracterización precisa de cultivos en 3D era una tarea muy laboriosa que resultaba inviable en grandes cultivos comerciales. Sin embargo, la introducción de nuevos sensores 3D ha supuesto una oportunidad para realizar esta tarea de una forma relativamente sencilla y rápida. Antes de utilizar un sistema de escaneo 3D para caracterizar el dosel, es fundamental conocer su error de medición o precisión. En esta investigación proponemos una metodología para evaluar la precisión de los sensores LiDAR comparando las nubes de puntos 3D basadas en LiDAR con un modelo digital de Ground-Truth (DGT) generado mediante la aplicación de técnicas de fotogrametría. La nube de puntos 3D de la DGT se obtuvo a partir de 288 fotografías de la escena que incluye el árbol Ground-Truth (Malus domestica Bork). La nube de puntos resultante tiene un sesgo de - 0,15 mm de diámetro y 0,05 mm de longitud, por lo que se puede considerar que la DGT representa fielmente la realidad. Este DGT es utilizado posteriormente para validar la nube de puntos generada por un sistema mobile terrestrial laser scanner (MTLS) compuesto por un sensor VLP-16 Velodyne LiDAR sincronizado con un sistema de posicionamiento GNSS-RTK. El MTLS se condujo a velocidades de 0,14 m/s y 0,55 m/s. Se obtuvo un error promedio de 4,3 cm y 4,4 cm, respectivamente. El número de puntos obtenidos a 0,14 m/s fue de 50 051 puntos y a 0,55 m/s de 12 503 puntos. A pesar de tener un error de medición bajo cuando se escanea a ambas velocidades, se obtiene una densidad de puntos óptima cuando se escanea a 0,14 m/s y pobre cuando se escanea a 0,55 m/s. De estos resultados se concluye que el error obtenido con el sensor Velodyne VLP-16 se considera aceptable en aplicaciones agronómicas., This research was funded by the Spanish Ministry of Economy and Competitiveness and the Ministry of Science, Innovation and Universities through the program Plan Estatal I+D+i Orientada a los Retos de la Sociedad, Project PAgFRUIT RTI2018-094222-B-I00.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost terrestrial photogrammetry for orchard sidewards 3D reconstruction

  • Martínez Casasnovas, José Antonio
  • Rosell Tarragó, Miquel
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Arnó Satorra, Jaume
  • Plata Moreno, José Manuel
  • Escolà i Agustí, Alexandre
The present study was part of the grants RTI2018-094222-B-I00 and PID2021-126648OB-I00 (PAgFRUIT and PAgPROTECT projects), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union