Pasar al contenido principal

ESTRATEGIAS INTEGRALES PARA UNA UTILIZACION DE FITOSANITARIOS SEGURA Y EFICAZ. PULVERIZACION DE PRECISION Y MONITORIZACION DE LA DERIVA EN FRUTICULTURA.

AGL2010-22304-C04-03

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE LLEIDA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent, Xavier
  • Gregorio, Eduard
  • Rosell-Polo, Joan R.
  • Arnó, Jaume
  • Peris, Miquel
  • van de Zande, Jan C.
  • Planas, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%–94.42% vs. 39.75%–69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

LiDAR-derived indices and their relationship with productivity and oil quality attributes in high-density olive orchards

  • Sandonis-Pozo, L.
  • Rufat, Josep
  • Pascual, M.
  • Villar, J.M.
  • Arnó, J.
  • Escolà, A.
  • Rosell-Polo, J.R.
  • Martínez-Casasnovas, J.A.
Optimising the leaf area index (LAI) and light exposure are key aspects to improve yield and quality in high-density olive orchards. Traditionally, these characteristics are estimated using ceptometers, but this method is both labour intensive and dependent on light conditions, with limitations in effectiveness for precision horticulture management purposes. This study investigates the potential of four LiDAR-derived indices to: i) estimate the LAI and canopy light interception under different fertigation treatments, and ii) to assess their impact on yield and oil quality throughout a growing season in a high-density olive orchard. The treatments included two nitrogen dose rates (N0: 0 kg ha-¹ and N50: 50 kg ha-¹) combined with full irrigation (FI) and deficit irrigation (DI). The results provide strong evidence for the effectiveness of these indices in monitoring canopy response to treatments over time. The N50 and FI treatments increased the LAI and yield but led to poorer light attenuation within the canopy and lower oil quality. In contrast, N0 and DI promoted more light-permeable canopies and improved oil quality, with higher phenolic content, better oxidative stability and improved organoleptic oil attributes. These indices can improve the understanding of canopy light environments, help to optimise management practices, and ultimately improve the sustainability and profitability of intensive olive cultivation., This work was carried out with data acquired in the project IRTA2012–00059-C02–01 funded by Spain’s National Institute for Agricultural and Food Research and Technology, as well as in the projects AGL2010–22304-C04–03 and AGL2013–48297-C2–2-R funded by the Spanish Ministry of Economy and Competitiveness. The study was carried out under the framework of the grants RTI2018–094222-B-I00 (PAgFRUIT project) and PID2021–126648OB-I00 (PAgPROTECT project) through MCIN/AEI/10.13039/501100011033 and the European Union’s “ERDF, a way of making Europe”., info:eu-repo/semantics/publishedVersion
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Chueca Adell, Patricia
  • Arnó Satorra, Jaume
  • Solanelles Batlle, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355 nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220-0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028-0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R) and EU FEDER. Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Education are thanked for Mr. Jordi Gené’s predoctoral fellowships (2016FI_B 00669 and FPU15/03355). The authors would like to thank the Institut de Recerca i Tecnologia Agroalimentàries for allowing the use of their experimental fields. The authors also wish to thank F. Camp, A. Escolà, C. Garcerá, F. Gràcia, J. Masip, E. Moltó, I. del Moral, and R. Viana for their assistance in the field work. X. Torrent and S. Planas are also thanked for the nozzle characterization with the PDA. F. Marenco (Met Office, UK) and P. Chazette (LSCE-IPLS, France) are acknowledged for their fruitful comments about lidar calibration.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 1. Classification using indirect methods

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Douzals, Jean-Paul
  • Tinet, Cyril
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Spray drift is one of the main pollution sources identified when pesticides are sprayed on crops. In this work, in order to simplify the evaluation of hollow-cone nozzles according to their drift potential reduction, several models commonly used were tested by three indirect methods: phase Doppler particle analyser (PDPA) and two different wind tunnels. The main aim of this study is then to classify for the first time these hollow-cone nozzle models all of them used in tree crop spraying (3D crops). A comparison between these indirect methods to assess their suitability and to provide guidelines for a spray drift classification of hollow-cone nozzles was carried out. The results show that, in general terms, all methods allow hollow-cone nozzle classifications according to their drift potential reduction (DPR) with a similar trend. Among all the parameters determined with the PDPA, the V100 parameter performed best in differentiating the tested nozzles among drift reduction classes. In the wind tunnel, similar values were obtained for both sedimenting and airborne drift depositions. The V100 parameter displayed a high correlation (up to R2 = 0.948) with the drift potential tested with the wind tunnel. It is concluded that in general, the evaluated indirect methods provide equivalent classification results. Additional studies with a greater variety of nozzle types are required to achieve a proposal of harmonized methodology for testing hollow-cone nozzles., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Multi-tree woody structure reconstruction from mobile terrestrial laser scanner point clouds based on a dual neighbourhood connectivity graph algorithm

  • Méndez, Valeriano
  • Rosell Polo, Joan Ramon
  • Pascual Roca, Miquel
  • Escolà i Agustí, Alexandre
A process is presented for the vector reconstruction of fruit plantations based on the model developed by Verroust and Lazarus. To solve occlusion problems, the use of a dual graph of local and extended connectivity is proposed. The process allows vegetation variables such as the length and volume of the ligneous structure to be measured, enabling studies such as intensity of pruning operations. The process has been tested against simulated models and real trees with different training systems: open-vase system (peach trees) and central leader hedgerow system (pear trees). The cost of the algorithm will be given by the cost of the implementation of Dijkstra's algorithm, which in its standard version is of potential (O(n2)). Algorithm accuracy was checked against point clouds of virtual trees. The reconstruction was also applied before and after a pruning operation of real trees to enable a study of the evolution of the vegetation indices. Results showed the algorithm to be suitable for multi-tree reconstruction of both central leader and open-vase training systems., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects SAFESPRAY: AGL2010-22304-C04-03 and AGVANCE: AGL2013-48297-C2-2-R).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 2. LiDAR technique

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Pesticide spray drift poses health hazards to humans and causes a significant impact on the environment. In this work the capacity of an ad hoc light detection and ranging (LiDAR) system to differentiate spray nozzles according to their potential drift risk is evaluated for the first time. A total of 23 drift potential tests using 10 hollow-cone nozzles were carried out with the sprayer kept in a static position. Drift potential reduction (DPR) values of between 88.6% and 93.6% were obtained when comparing standard and drift reduction nozzle types. It was also possible to order different standard nozzle sizes according to their DPR. The LiDAR signalwas correlated with several droplet size parametersmeasured by a phase Doppler particle analyzer (PDPA), being V100 the best indicator. In the four field tests thatwere performed, the LiDAR systemwas also able to differentiate between standard and drift reduction nozzles under real application conditions, obtaining a DPR of 56.7%. The results of this work demonstrate that the developed LiDAR system is an advantageous alternative for the assessment of drift potential reduction., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. Universitat de Lleida is thanked for Mr. X. Torrent's pre-doctoral fellowship. The authors would like to thank the Unité Mixte de Recherche Information & Technologies for AgroProcess (IRSTEA, Montpellier), and particularly Jean-Paul Douzals and Cyril Tinet for the nozzle characterization using their PDPA. Our thanks are also given to the Institut de Recerca en Tecnologia Agrària (IRTA) for allowing the use of their experimental fields, and to Vicenç Maquinària Agrícola for providing the tractor. The authors also wish to thank A. Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. R. Lavilla, E. Ordoño and F. Solanelles are acknowledged for their assistance in the field work, and J. Arnó is thanked for his help with statistical analysis.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR and non-LIDAR-based canopy parameters to estimate the leaf area in fruit trees and vineyard

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Planas de Martí, Santiago
  • Román, Carla
  • Rosell Polo, Joan Ramon
This paper is based on two initial hypotheses, firstly, it is proposed that the vegetation volume obtained with a LIDAR-based system or tree row LIDAR volume (TRLV) has a high correlation with the leaf area (LA). Secondly, it is proposed that the projected outer surface or projected tree row surface (PTRS), also LIDAR-based, is linearly related with the LA. The verification of these two hypotheses corresponds to the first two objectives of this work. The third objective is to propose an alternative method, without using LIDAR sensors, simpler and more economical, for in situ LA evaluation. To achieve these objectives a total of 17 blocks of pear, 14 of apple and 26 of vine, in different phenological states, were LIDAR scanned and subsequently manually defoliated. After the field and calculation work, the TRLV and LA were compared. The logarithmic regressions obtained had high correlations. For apple and pear trees the equations are practically the same with R2 of 0.85 and 0.84, respectively. The equation corresponding to vines is somewhat different and has an R2 of 0.86. The regression without species differentiation is 3.66ln(x) +9.65 with R2=0.90. Based on the TRLV, the front and top projected surface areas of each block were then obtained and, using these variables, the PTRS. The linear regressions obtained between PTRS and LA have high correlations with R2 of 0.88, 0.85 and 0.80 for apple trees, pear trees, and vineyard respectively. The three crops show very similar behavior. The straight lines are very close, with very similar slopes. With no species differentiation the linear regression model is y=1.47x - 1.18 with R2=0.93. The starting point of the third objective is to obtain the projected surfaces, frontal and top, without using a LIDAR sensor. These surfaces are not as precise as those obtained with LIDAR and for this reason they are referred to as 'estimated' projected surfaces. To calculate the estimated PTRS without a LIDAR sensor, the height and depth of the vegetation are measured with a tape measure. It is also necessary to make a visual estimation of the frontal gap-fraction. For this, a training method with known gap-fraction pictograms is proposed. The final results with this non-LIDAR method are very similar to those obtained with LIDAR. This method, although it needs human intervention, is simple, easy, economical and precise for in situ LA estimation., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2002-04260-C04-02, AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013- 48297-C2-2-R) and EU FEDER. Funding of Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 646 is also thanked.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Relationship between tree row LIDAR-volume and leaf area density for fruit orchards and vineyards obtained with a LIDAR 3D Dynamic Measurement System

  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Planas de Martí, Santiago
In this work, a LIDAR 3D Dynamic Measurement System, based on a Two-Dimensional Terrestrial Laser-LIDAR Scanner (2D TLS), was used for the geometric characterisation of tree-row crops (apple trees, pear trees and vineyards). The trees were scanned with the LIDAR system from opposite sides to obtain two three-dimensional point clouds. The point clouds were registered and the volume occupied by the resulting point cloud, tree row LIDAR-volume (TRLV), was graphically and numerically obtained. The study undertaken in this paper is based on the hypothesis that there may exist a non-linear relationship between the TRLV and the leaf area density (LAD). The main objective is to examine the relationship between TRLV and LAD in vineyards, apple and pear orchards. The study of 35 blocks of vegetation reveals a good logarithmic fit, y = −0.36 ln(x) + 3.69 with R2 = 0.87, between the TRLV (x) in dm3 and the LAD (y) in dm−1. It would appear that the TRLV of the crops under study (planted in a hedgerow-type configuration) is in itself an explanation of the LAD. The competition for light between the leaves and the space that these leaves occupy appear to follow a similar model in the three crops. According to the results of this study, the LAD can be estimated from the TRLV. If the LAD is multiplied by the TRLV, the leaf area of the vegetation under study can be obtained. It is therefore concluded that by using the information provided by the LIDAR 3D Dynamic Measurement System, a good estimation can be obtained of the leaf area in hedgerow fruit tree crops and hedgerow vineyards., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Peris Giner, Miquel
  • van de Zande, Jan C.
  • Planas de Martí, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%-94.42% vs. 39.75%-69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Characterisation of the LMS200 laser beam under the influence of blockage surfaces. Influence on 3D scanning of tree orchards

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Rosell Polo, Joan Ramon
  • Gregorio López, Eduard
  • Palacín Roca, Jordi
The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels., This research was funded by FEDER (Fondo Europeo de Desarrollo Regional) and the CICYT (Comisión Interministerial de Ciencia y Tecnología, Spain), under Agreement N, AGL2002-04260-C04-02 and AGL2010-22304-C04-03. LMS200 and SICK are trademarks of SICK AG, Germany.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Eye-safe lidar system for pesticide spray drift measurement

  • Gregorio López, Eduard
  • Rocadenbosch Burillo, Francesc
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
Spray drift is one of the main sources of pesticide contamination. For this reason, an accurate understanding of this phenomenon is necessary in order to limit its effects. Nowadays, spray drift is usually studied by using in situ collectors which only allow time-integrated sampling of specific points of the pesticide clouds. Previous research has demonstrated that the light detection and ranging (lidar) technique can be an alternative for spray drift monitoring. This technique enables remote measurement of pesticide clouds with high temporal and distance resolution. Despite these advantages, the fact that no lidar instrument suitable for such an application is presently available has appreciably limited its practical use. This work presents the first eye-safe lidar system specifically designed for the monitoring of pesticide clouds. Parameter design of this system is carried out via signal-to-noise ratio simulations. The instrument is based on a 3-mJ pulse-energy erbium-doped glass laser, an 80-mm diameter telescope, an APD optoelectronic receiver and optomechanically adjustable components. In first test measurements, the lidar system has been able to measure a topographic target located over 2 km away. The instrument has also been used in spray drift studies, demonstrating its capability to monitor the temporal and distance evolution of several pesticide clouds emitted by air-assisted sprayers at distances between 50 and 100 m., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R) and EU FEDER. This work was conducted in the framework of the collaboration agreement between the Universitat Politècnica de Catalunya (UPC) and the Universitat de Lleida (UdL) ref. A-00793 for Range-Resolved Remote Sensing of the Concentration of Pesticides in Agroforestry Environments. Alexandre Escolà and Joan Masip from the UdL, and Adolfo Comerón, Alejandro Rodríguez and Jordi Tiana from the UPC, are thanked for their cooperation in preparing this work. Innovació i Recerca Industrial i Sostenible S.L. (IRIS) is thanked for his cooperation in the development of the receiving subsystem.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Spatially variable pesticide application in vineyards: Part I, developing a geostatistical approach

  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
  • Uribeetxebarria Alonso de Armiño, Asier
  • Arnó Satorra, Jaume
A geostatistical methodology is presented to optimise the dosage of plant protection products (PPP) in vineyards with spatial variability. Sprayers are commonly used in viticulture to apply a constant volume rate per unit ground area (l ha−1). This can be a problem in vineyard plots with remarkable spatial variability in vine vigour, being necessary guiding winegrowers through a decision-making tool to determine an appropriate uniform volume rate. The leaf area index (LAI), measured by a terrestrial LiDAR scanner at high spatial resolution along crop rows, can be used to determine the optimum volume application rate. The proposed method is based on obtaining different probability maps of LAI by applying an indicator kriging to the original LAI data. As a result, this method allows winegrowers to i) map and locate areas within the plot that, within a given confidence level (70% or 90%), exceed or do not exceed different values (percentiles) of the original LAI, and ii) set the LAI and the corresponding volume rate seeking, for example, to balance the probability (risk) of areas with lower and higher doses than required. In more conservative protection strategies, the method also allows farmers to set the values of LAI and volume rate that greatly minimise the probability of vulnerable areas being underdosed., This work was partially funded by the Ministerio de Economía y Competitividad, Spain [research projects SAFESPRAY - AGL2010-22304-C04-03 and AGVANCE – AGL2013-48297-C2-2-R].
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Mobile terrestrial laser scanner applications in precision fruticulture/ horticulture and tools to extract information from canopy point clouds

  • Escolà i Agustí, Alexandre
  • Martínez Casasnovas, José Antonio
  • Rufat i Lamarca, Josep
  • Arnó Satorra, Jaume
  • Arbonés, Amadeu
  • Sebé Feixas, Francesc
  • Pascual Roca, Miquel
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
LiDAR sensors are widely used in many areas and, in recent years, that includes agricultural tasks. In this work, a self-developed mobile terrestrial laser scanner based on a 2D light detection and ranging (LiDAR) sensor was used to scan an intensive olive orchard, and different algorithms were developed to estimate canopy volume. Canopy volume estimations derived from LiDAR sensor readings were compared to conventional estimations used in fruticulture/horticulture research and the results prove that they are equivalent with coefficients of correlation ranging from r = 0.56 to r = 0.82 depending on the algorithms used. Additionally, tools related to analysis of point cloud data from the LiDAR-based system are proposed to extract further geometrical and structural information from tree row crop canopies to be offered to farmers and technical advisors as digital raster maps. Having high spatial resolution information on canopy geometry (i.e., height, width and volume) and on canopy structure (i.e., light penetrability, leafiness and porosity) may result in better orchard management decisions. Easily obtainable, reliable information on canopy geometry and structure may favour the development of decision support systems either for irrigation, fertilization or canopy management, as well as for variable rate application of agricultural inputs in the framework of precision fruticulture/horticulture., This work was funded by the Spanish Ministry of Economy and Competitiveness through the projects SAFESPRAY (AGL2010-22304-C04-03) and AgVANCE (AGL2013-48297-C2-2-R) and by the project Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria RTA2012-00059-C02-01.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A new Leafiness-LiDAR index to estimate light interception in intensive olive orchards

  • Sandonís Pozo, Leire
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
The 14th European Conference on Precision Agriculture, July 2-6, 2023, Bologna, Italy, Canopy light interception constitutes an important yield limiting factor in high density olive orchards. However, its characterisation still implies laborious measurements. A new index, the Leafiness-LiDAR index (LLI), is presented as a LAI estimator. LLI combines LiDAR-derived parameters: Cross-Section and Leafiness from 3D point clouds. To validate the results, photosynthetically active radiation (PAR) measurements, canopy volume, yield and quality parameters were collected and analysed. LLI showed significant correlations both with PAR and canopy volume (r = 0.8) and quality parameters (r = -0.6). LLI may be useful as an early decision canopy monitoring tool in the framework of Precision Fructiculture., This work was carried out with data acquired in the project IRTA2012-00059-C02-01 funded by the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, as well as in the projects AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R funded by the Spanish Ministry of Economy and Competitiveness and developed under the frame of the grants RTI2018-094222-B-I00 (PAgFRUIT project) and PID2021-126648OB-I00 (PAgPROTECT project) by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation

  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Gil Moya, Emilio
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Llorens Calveras, Jordi
  • Solanelles Batlle, Francesc
Discussions in recent decades about dosage models for applying plant protection products in orchards have failed to reach a compromise solution. Furthermore, canopies are spatially variable, and a uniform dose may not be adequate for the entire orchard. Spraying at an adequate volume application rate on a site-specific basis would help reduce the amount of agrochemicals used in the framework of precision horticulture and precision fructiculture. An orchard sprayer prototype running a variable-rate algorithm to adapt the volume application rate to the canopy volume in orchards on a real-time and continuous basis was designed, implemented, and validated. An equivalent prototype was designed for vineyards and described in a companion paper (‘Variable rate sprayer. Part 2 – Vineyard prototype: Design, implementation and validation’). The orchard prototype was divided into three parts: the canopy characterization system (using a LiDAR sensor), the controller executing a variable-rate algorithm, and the actuators. The controller determines the intended flow rate by using an application coefficient (required liquid volume per unit canopy volume) to convert canopy volume into a flow rate. The sprayed flow rates are adjusted via electromagnetic variable-rate valves. The goal of the prototype was to keep the actual application coefficients as close as possible to the objective. Strong relationships were observed between the intended and the sprayed flow rates (R2 = 0.935) and between the canopy cross-sectional areas and the sprayed flow rates (R2 = 0.926). In addition, when spraying in variable-rate mode, the prototype achieved significantly closer application coefficient values to the objective than those obtained in conventional spraying application mode., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03), and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Ribes Dasi, Manuel
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Gràcia Aguilà, Felipe José
  • Solanelles Batlle, Francesc
  • Planas de Martí, Santiago
  • Pallejà Cabrè, Tomàs
  • Palacín Roca, Jordi
  • Gregorio López, Eduard
  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of the research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Real-time approaches for characterization of fully and partially scanned canopies in groves

  • Auat Cheein, Fernando
  • Guivant, José
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Yandun, Francisco J.
  • Torres-Torriti, Miguel
  • Rosell Polo, Joan Ramon
Efficient information management in orchard characterization leads to more efficient agricultural processes. In this brief, a set of computational geometry methods are presented and evaluated for orchard characterization; in particular, for the estimation of canopy volume and shape in groves and orchards using a LiDAR (Light Detection And Ranging) sensor mounted on an agricultural service unit. The proposed approaches were evaluated and validated in the field, showing they are convergent in the estimation process and that they are able to estimate the crown volume for fully scanned canopies in real time; for partially observed tree crowns, accuracy decreases up to 30% (the worst case). The latter is the major contribution of this brief since it implies that the automated service unit does not need to cover all alley-ways for an accurate modeling of the orchard, thus saving valuable resources., The authors would like to thank to CONICYT (Chile): FONDECYT Grant 1140575 and Basal Grant FB0008. Also, this research was partially funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds (projects Optidosa-AGL2007-66093-C04-03 and Safespray-AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Lidar: towards a new methodology for field measurement of spray drift

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Solanelles Batlle, Francesc
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Masip Vilalta, Joan
  • Ribes Dasi, Manuel
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Lidar technology is becoming a promising alternative for spray drift measurement to the labour and time-expensive methodologies based on the ISO 22866 standard. This paper presents last advancements in an eye-safe lidar system specifically designed for drift monitoring. The lidar system was tested with an air-assisted sprayer in two cases: with standard hollow cone and air induction low-drift nozzles. The remaining variables (flow rate, environmental conditions,…) were similar. Lidar measurements allowed to know the time evolution of spray drift clouds and showed a much higher droplet concentration, dwelling time and dimensions for the cloud generated by standard nozzles. Also, the ability of the lidar system to distinguish different nozzle types according to their drift potential was proved. Finally, staring (laser beam stationary through the drift cloud) and 2D scanning measurements are discussed as starting points for an alternative spray drift measurement methodology., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03 and AGL2013-48297-C2-2- R) and EU FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Performance of an ultrasonic ranging sensor in apple tree canopies

  • Escolà i Agustí, Alexandre
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Gràcia, Felip
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic sensor under laboratory and field conditions in order to provide reliable estimations of distance measurements to apple tree canopies. To this purpose, a methodology has been designed to analyze sensor performance in relation to foliage ranging and to interferences with adjacent sensors when working simultaneously. Results show that the average error in distance measurement using the ultrasonic sensor in laboratory conditions is ±0.53 cm. However, the increase of variability in field conditions reduces the accuracy of this kind of sensors when estimating distances to canopies. The average error in such situations is ±5.11 cm. When analyzing interferences of adjacent sensors 30 cm apart, the average error is ±17.46 cm. When sensors are separated 60 cm, the average error is ±9.29 cm. The ultrasonic sensor tested has been proven to be suitable to estimate distances to the canopy in field conditions when sensors are 60 cm apart or more and could, therefore, be used in a system to estimate structural canopy parameters in precision horticulture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Mapping vineyard leaf area using mobile terrestrial laser scanners: should rows be scanned on-the-go or discontinuosly sampled?

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Company Mesa, Joaquim
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Masip Vilalta, Joan
  • Martínez Casasnovas, José Antonio
  • Arnó Satorra, Jaume
The leaf area index (LAI) is defined as the one-side leaf area per unit ground area, and is probably the most widely used index to characterize grapevine vigor. However, LAI varies spatially within vineyard plots. Mapping and quantifying this variability is very important for improving management decisions and agricultural practices. In this study, a mobile terrestrial laser scanner (MTLS) was used to map the LAI of a vineyard, and then to examine how different scanning methods (on-the-go or discontinuous systematic sampling) may affect the reliability of the resulting raster maps. The use of the MTLS allows calculating the enveloping vegetative area of the canopy, which is the sum of the leaf wall areas for both sides of the row (excluding gaps) and the projected upper area. Obtaining the enveloping areas requires scanning from both sides one meter length section along the row at each systematic sampling point. By converting the enveloping areas into LAI values, a raster map of the latter can be obtained by spatial interpolation (kriging). However, the user can opt for scanning on-the-go in a continuous way and compute 1-m LAI values along the rows, or instead, perform the scanning at discontinuous systematic sampling within the plot. An analysis of correlation between maps indicated that MTLS can be used discontinuously in specific sampling sections separated by up to 15 m along the rows. This capability significantly reduces the amount of data to be acquired at field level, the data storage capacity and the processing power of computers., This work was partially funded by the Spanish Ministry of Economy and Competitiveness (research projects SAFESPRAY—AGL2010-22304-C04-03 and AGVANCE—AGL2013-48297-C2-2-R).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Airborne spray drift measurement using passive collectors and lidar systems

  • Gregorio López, Eduard
  • Solanelles Batlle, Francesc
  • Rocadenbosch Burillo, Francesc
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
Minimization of the risk associated with spray applications requires a proper understanding of the spray drift phenomenon. This fact has led to the development of several techniques to measure the deposition on horizontal surfaces as well as the airborne spray profiles. Assessment of airborne spray drift is particularly difficult because this phenomenon is subject to variable micrometeorological conditions. However the monitoring of airborne drift has a great importance since it can be carried over long distances. This paper reviews main sampling techniques currently used to asses the airborne spray drift, based on passive collectors and tracers. Theoretical principles that determine the efficiency of passive samplers are studied as well as the performance of different types of tracers. On the other hand, this paper shows new airborne spray drift assessment techniques based on lidar technology, reviewing its principle of operation as well as its practical application in several spray drift trials. It is concluded that the lidar technique has significant advantages over conventional methods, especially in terms of time consumption and monitoring capabilities. However, the future adoption of lidar technology for airborne spray drift studies will be subjected to the development of lidar instruments really adapted to this application., The authors wish to acknowledge the MICINN (Spanish Ministry of Science and Innovation) and FEDER funds under the projects AGL2010-22304-C04-03 and TEC2009-09106
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Georeferenced Scanning System to Estimate the Leaf Wall Area in Tree Crops

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Company Mesa, Joaquim
This paper presents the use of a terrestrial light detection and ranging (LiDAR) system to scan the vegetation of tree crops to estimate the so-called pixelated leaf wall area (PLWA). Scanning rows laterally and considering only the half-canopy vegetation to the line of the trunks, PLWA refers to the vertical projected area without gaps detected by LiDAR. As defined, PLWA may be different depending on the side from which the LiDAR is applied. The system is completed by a real-time kinematic global positioning system (RTK-GPS) sensor and an inertial measurement unit (IMU) sensor for positioning. At the end, a total leaf wall area (LWA) is computed and assigned to the X, Y position of each vertical scan. The final value of the area depends on the distance between two consecutive scans (or horizontal resolution), as well as the number of intercepted points within each scan, since PLWA is only computed when the laser beam detects vegetation. To verify system performance, tests were conducted related to the georeferencing task and synchronization problems between GPS time and central processing unit (CPU) time. Despite this, the overall accuracy of the system is generally acceptable. The Leaf Area Index (LAI) can then be estimated using PLWA as an explanatory variable in appropriate linear regression models., This work was funded by the Spanish Ministry of Economy and Competitiveness and by the European Union through its FEDER funds; it is a part of the Optidosa (AGL2007-66093-C04-03), Safespray (AGL2010-22304-C04-03) and Agvance (AGL2013-48297-C2-2-R) research projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chapter Three - Advances in Structured Light Sensors Applications in Precision Agriculture and Livestock Farming

  • Rosell Polo, Joan R.
  • Auat Cheein, Fernando
  • Gregorio, Eduard
  • Andújar, Dionisio
  • Puigdomènech, Lluís
  • Masip, Joan
  • Escolà, Alexandre
The sustained growth of the world’s population in the coming years will require an even greater role for agriculture to meet the food needs of humankind. To improve the productivity and competitiveness of the agricultural industry, it is necessary to develop new and affordable sensing technologies for agricultural operations. This kind of innovations should be implemented in a framework considering the farm, the crops, and their surroundings, with the aim of providing the farmer with information to take better decisions to enhance the production. This is the case of precision agriculture and precision livestock farming. This chapter reviews and discusses the use of structured light sensors in the characterization and phenotyping of crops in orchards and groves, weeds, and animals. As a result of a collaboration between researchers from Spain and Chile, opportunities for this type of sensors have been identified in these countries as examples of South American and European agriculture. In this context, several empirical case studies are presented regarding the use of structured light sensors for flower, fruit, branch, and trunk characterization considering depth and RGB (red-green-blue colors) information in avocados, lemons, apple, and pear orchards. Applications to weed detection and classification as well as to livestock phenotyping are also illustrated. Regarding the presented case studies, experimental and statistical results are provided showing the pros and cons of structured light sensors applied to agricultural environments. Additionally, several considerations are included for the use of this type of sensors to improve the agricultural process, This work was partially funded by the Spanish Ministry of Science and Innovation by the SAFESPRAY Project (AGL2010-22304-C04-03); the Mecesup FSM1204-UTFSM, FONDECYT 1140575 (Chile) project, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Solanelles, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355¿nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220–0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028–0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Testing the suitability of a terrestrial 2D LiDAR scanner for canopy characterization of greenhouse tomato crops

  • Llop Casamada, Jordi|||0000-0001-9033-3770
  • Gil Moya, Emilio|||0000-0002-3929-5649
  • Llorens Calveras, Jordi|||0000-0003-4625-1860
  • Miranda Fuentes, Antonio
  • Gallart González-Palacio, Montserrat|||0000-0002-9347-2984
Canopy characterization is essential for pesticide dosage adjustment according to vegetation volume and density. It is especially important for fresh exportable vegetables like greenhouse tomatoes. These plants are thin and tall and are planted in pairs, which makes their characterization with electronic methods difficult. Therefore, the accuracy of the terrestrial 2D LiDAR sensor is evaluated for determining canopy parameters related to volume and density and established useful correlations between manual and electronic parameters for leaf area estimation. Experiments were performed in three commercial tomato greenhouses with a paired plantation system. In the electronic characterization, a LiDAR sensor scanned the plant pairs from both sides. The canopy height, canopy width, canopy volume, and leaf area were obtained. From these, other important parameters were calculated, like the tree row volume, leaf wall area, leaf area index, and leaf area density. Manual measurements were found to overestimate the parameters compared with the LiDAR sensor. The canopy volume estimated with the scanner was found to be reliable for estimating the canopy height, volume, and density. Moreover, the LiDAR scanner could assess the high variability in canopy density along rows and hence is an important tool for generating canopy maps.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Spray distribution evaluation of different settings of a hand-held-trolley sprayer used in greenhouse tomato crops

  • Llop Casamada, Jordi|||0000-0001-9033-3770
  • Gil Moya, Emilio|||0000-0002-3929-5649
  • Gallart González-Palacio, Montserrat|||0000-0002-9347-2984
  • Contador, Felipe
  • Ercilla-Montserrat, Mireia
Hand-held-trolley sprayers have recently been promoted to improve spray application techniques in greenhouses in south-eastern Spain. However, certain aspects remain to be improved. A modified hand-held-trolley sprayer was evaluated under two different canopy conditions (high and low canopy density) and with several sprayer settings (nozzle type, air assistance and spray volume). In this study, the deposition, coverage and uniformity of distribution of the spray on the canopy have been assessed. RESULTS The deposition on leaves was significantly higher when flat-fan nozzles and air assistance were used at both high and low spray volumes. No differences were detected between the reference system at a high spray volume and the modified trolley at a low spray volume. Flat-fan nozzles with air assistance increased penetrability into the canopy. CONCLUSIONS Air assistance and flat-fan nozzles allow volume rates to be reduced while maintaining or improving spray quality distribution. The working parameters of hand-held sprayers must be considered to reduce environmental risk and increase the efficacy of the spraying process. © 2015 Society of Chemical Industry
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lidar: towards a new methodology for field measurement of spray drift

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Solanelles Batlle, Francesc
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Masip Vilalta, Joan
  • Ribes Dasi, Manuel
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Lidar technology is becoming a promising alternative for spray drift measurement to the labour and time-expensive methodologies based on the ISO 22866 standard. This paper presents last advancements in an eye-safe lidar system specifically designed for drift monitoring. The lidar system was tested with an air-assisted sprayer in two cases: with standard hollow cone and air induction low-drift nozzles. The remaining variables (flow rate, environmental conditions,…) were similar. Lidar measurements allowed to know the time evolution of spray drift clouds and showed a much higher droplet concentration, dwelling time and dimensions for the cloud generated by standard nozzles. Also, the ability of the lidar system to distinguish different nozzle types according to their drift potential was proved. Finally, staring (laser beam stationary through the drift cloud) and 2D scanning measurements are discussed as starting points for an alternative spray drift measurement methodology., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03 and AGL2013-48297-C2-2- R) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LiDAR-derived indices and their relationship with productivity and oil quality attributes in high-density olive orchards

  • Sandonis-Pozo, L.
  • Rufat, Josep
  • Pascual, M.
  • Villar, J.M.
  • Arnó, J.
  • Escolà, A.
  • Rosell-Polo, J.R.
  • Martínez-Casasnovas, J.A.
Optimising the leaf area index (LAI) and light exposure are key aspects to improve yield and quality in high-density olive orchards. Traditionally, these characteristics are estimated using ceptometers, but this method is both labour intensive and dependent on light conditions, with limitations in effectiveness for precision horticulture management purposes. This study investigates the potential of four LiDAR-derived indices to: i) estimate the LAI and canopy light interception under different fertigation treatments, and ii) to assess their impact on yield and oil quality throughout a growing season in a high-density olive orchard. The treatments included two nitrogen dose rates (N0: 0 kg ha-¹ and N50: 50 kg ha-¹) combined with full irrigation (FI) and deficit irrigation (DI). The results provide strong evidence for the effectiveness of these indices in monitoring canopy response to treatments over time. The N50 and FI treatments increased the LAI and yield but led to poorer light attenuation within the canopy and lower oil quality. In contrast, N0 and DI promoted more light-permeable canopies and improved oil quality, with higher phenolic content, better oxidative stability and improved organoleptic oil attributes. These indices can improve the understanding of canopy light environments, help to optimise management practices, and ultimately improve the sustainability and profitability of intensive olive cultivation., This work was carried out with data acquired in the project IRTA2012–00059-C02–01 funded by Spain’s National Institute for Agricultural and Food Research and Technology, as well as in the projects AGL2010–22304-C04–03 and AGL2013–48297-C2–2-R funded by the Spanish Ministry of Economy and Competitiveness. The study was carried out under the framework of the grants RTI2018–094222-B-I00 (PAgFRUIT project) and PID2021–126648OB-I00 (PAgPROTECT project) through MCIN/AEI/10.13039/501100011033 and the European Union’s “ERDF, a way of making Europe”., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Peris Giner, Miquel
  • van de Zande, Jan C.
  • Planas de Martí, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%-94.42% vs. 39.75%-69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Georeferenced Scanning System to Estimate the Leaf Wall Area in Tree Crops

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Company Mesa, Joaquim
This paper presents the use of a terrestrial light detection and ranging (LiDAR) system to scan the vegetation of tree crops to estimate the so-called pixelated leaf wall area (PLWA). Scanning rows laterally and considering only the half-canopy vegetation to the line of the trunks, PLWA refers to the vertical projected area without gaps detected by LiDAR. As defined, PLWA may be different depending on the side from which the LiDAR is applied. The system is completed by a real-time kinematic global positioning system (RTK-GPS) sensor and an inertial measurement unit (IMU) sensor for positioning. At the end, a total leaf wall area (LWA) is computed and assigned to the X, Y position of each vertical scan. The final value of the area depends on the distance between two consecutive scans (or horizontal resolution), as well as the number of intercepted points within each scan, since PLWA is only computed when the laser beam detects vegetation. To verify system performance, tests were conducted related to the georeferencing task and synchronization problems between GPS time and central processing unit (CPU) time. Despite this, the overall accuracy of the system is generally acceptable. The Leaf Area Index (LAI) can then be estimated using PLWA as an explanatory variable in appropriate linear regression models., This work was funded by the Spanish Ministry of Economy and Competitiveness and by the European Union through its FEDER funds; it is a part of the Optidosa (AGL2007-66093-C04-03), Safespray (AGL2010-22304-C04-03) and Agvance (AGL2013-48297-C2-2-R) research projects.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation

  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Gil Moya, Emilio
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Llorens Calveras, Jordi
  • Solanelles Batlle, Francesc
Discussions in recent decades about dosage models for applying plant protection products in orchards have failed to reach a compromise solution. Furthermore, canopies are spatially variable, and a uniform dose may not be adequate for the entire orchard. Spraying at an adequate volume application rate on a site-specific basis would help reduce the amount of agrochemicals used in the framework of precision horticulture and precision fructiculture. An orchard sprayer prototype running a variable-rate algorithm to adapt the volume application rate to the canopy volume in orchards on a real-time and continuous basis was designed, implemented, and validated. An equivalent prototype was designed for vineyards and described in a companion paper (‘Variable rate sprayer. Part 2 – Vineyard prototype: Design, implementation and validation’). The orchard prototype was divided into three parts: the canopy characterization system (using a LiDAR sensor), the controller executing a variable-rate algorithm, and the actuators. The controller determines the intended flow rate by using an application coefficient (required liquid volume per unit canopy volume) to convert canopy volume into a flow rate. The sprayed flow rates are adjusted via electromagnetic variable-rate valves. The goal of the prototype was to keep the actual application coefficients as close as possible to the objective. Strong relationships were observed between the intended and the sprayed flow rates (R2 = 0.935) and between the canopy cross-sectional areas and the sprayed flow rates (R2 = 0.926). In addition, when spraying in variable-rate mode, the prototype achieved significantly closer application coefficient values to the objective than those obtained in conventional spraying application mode., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03), and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterisation of the LMS200 laser beam under the influence of blockage surfaces. Influence on 3D scanning of tree orchards

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Rosell Polo, Joan Ramon
  • Gregorio López, Eduard
  • Palacín Roca, Jordi
The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels., This research was funded by FEDER (Fondo Europeo de Desarrollo Regional) and the CICYT (Comisión Interministerial de Ciencia y Tecnología, Spain), under Agreement N, AGL2002-04260-C04-02 and AGL2010-22304-C04-03. LMS200 and SICK are trademarks of SICK AG, Germany.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Chueca Adell, Patricia
  • Arnó Satorra, Jaume
  • Solanelles Batlle, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355 nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220-0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028-0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R) and EU FEDER. Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Education are thanked for Mr. Jordi Gené’s predoctoral fellowships (2016FI_B 00669 and FPU15/03355). The authors would like to thank the Institut de Recerca i Tecnologia Agroalimentàries for allowing the use of their experimental fields. The authors also wish to thank F. Camp, A. Escolà, C. Garcerá, F. Gràcia, J. Masip, E. Moltó, I. del Moral, and R. Viana for their assistance in the field work. X. Torrent and S. Planas are also thanked for the nozzle characterization with the PDA. F. Marenco (Met Office, UK) and P. Chazette (LSCE-IPLS, France) are acknowledged for their fruitful comments about lidar calibration.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LiDAR-derived indices and their relationship with productivity and oil quality attributes in high-density olive orchards

  • Sandonís Pozo, Leire
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
  • Villar Mir, Josep Ma.
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Martínez Casasnovas, José Antonio
Optimising the leaf area index (LAI) and light exposure are key aspects to improve yield and quality in highdensity olive orchards. Traditionally, these characteristics are estimated using ceptometers, but this method is both labour intensive and dependent on light conditions, with limitations in effectiveness for precision horticulture management purposes. This study investigates the potential of four LiDAR-derived indices to: i) estimate the LAI and canopy light interception under different fertigation treatments, and ii) to assess their impact on yield and oil quality throughout a growing season in a high-density olive orchard. The treatments included two nitrogen dose rates (N0: 0 kg ha-¹ and N50: 50 kg ha-¹) combined with full irrigation (FI) and deficit irrigation (DI). The results provide strong evidence for the effectiveness of these indices in monitoring canopy response to treatments over time. The N50 and FI treatments increased the LAI and yield but led to poorer light attenuation within the canopy and lower oil quality. In contrast, N0 and DI promoted more light-permeable canopies and improved oil quality, with higher phenolic content, better oxidative stability and improved organoleptic oil attributes. These indices can improve the understanding of canopy light environments, help to optimise management practices, and ultimately improve the sustainability and profitability of intensive olive cultivation., This work was carried out with data acquired in the project IRTA2012–00059-C02–01 funded by Spain’s National Institute for Agricultural and Food Research and Technology, as well as in the projects AGL2010–22304-C04–03 and AGL2013–48297-C2–2-R funded by the Spanish Ministry of Economy and Competitiveness. The study was carried out under the framework of the grants RTI2018–094222-B-I00 (PAgFRUIT project) and PID2021–126648OB-I00 (PAgPROTECT project) through MCIN/AEI/10.13039/501100011033 and the European Union’s “ERDF, a way of making Europe”.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Testing the suitability of a terrestrial 2D LiDAR scanner for canopy characterization of greenhouse tomato crops

  • Llop Casamada, Jordi
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Miranda Fuentes, Antonio
  • Gallart González-Palacio, Montserrat
Canopy characterization is essential for pesticide dosage adjustment according to vegetation volume and density. It is especially important for fresh exportable vegetables like greenhouse tomatoes. These plants are thin and tall and are planted in pairs, which makes their characterization with electronic methods difficult. Therefore, the accuracy of the terrestrial 2D LiDAR sensor is evaluated for determining canopy parameters related to volume and density and established useful correlations between manual and electronic parameters for leaf area estimation. Experiments were performed in three commercial tomato greenhouses with a paired plantation system. In the electronic characterization, a LiDAR sensor scanned the plant pairs from both sides. The canopy height, canopy width, canopy volume, and leaf area were obtained. From these, other important parameters were calculated, like the tree row volume, leaf wall area, leaf area index, and leaf area density. Manual measurements were found to overestimate the parameters compared with the LiDAR sensor. The canopy volume estimated with the scanner was found to be reliable for estimating the canopy height, volume, and density. Moreover, the LiDAR scanner could assess the high variability in canopy density along rows and hence is an important tool for generating canopy maps., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A new Leafiness-LiDAR index to estimate light interception in intensive olive orchards

  • Sandonís Pozo, Leire
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
The 14th European Conference on Precision Agriculture, July 2-6, 2023, Bologna, Italy, Canopy light interception constitutes an important yield limiting factor in high density olive orchards. However, its characterisation still implies laborious measurements. A new index, the Leafiness-LiDAR index (LLI), is presented as a LAI estimator. LLI combines LiDAR-derived parameters: Cross-Section and Leafiness from 3D point clouds. To validate the results, photosynthetically active radiation (PAR) measurements, canopy volume, yield and quality parameters were collected and analysed. LLI showed significant correlations both with PAR and canopy volume (r = 0.8) and quality parameters (r = -0.6). LLI may be useful as an early decision canopy monitoring tool in the framework of Precision Fructiculture., This work was carried out with data acquired in the project IRTA2012-00059-C02-01 funded by the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, as well as in the projects AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R funded by the Spanish Ministry of Economy and Competitiveness and developed under the frame of the grants RTI2018-094222-B-I00 (PAgFRUIT project) and PID2021-126648OB-I00 (PAgPROTECT project) by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Eye-safe lidar system for pesticide spray drift measurement

  • Gregorio López, Eduard
  • Rocadenbosch Burillo, Francesc
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
Spray drift is one of the main sources of pesticide contamination. For this reason, an accurate understanding of this phenomenon is necessary in order to limit its effects. Nowadays, spray drift is usually studied by using in situ collectors which only allow time-integrated sampling of specific points of the pesticide clouds. Previous research has demonstrated that the light detection and ranging (lidar) technique can be an alternative for spray drift monitoring. This technique enables remote measurement of pesticide clouds with high temporal and distance resolution. Despite these advantages, the fact that no lidar instrument suitable for such an application is presently available has appreciably limited its practical use. This work presents the first eye-safe lidar system specifically designed for the monitoring of pesticide clouds. Parameter design of this system is carried out via signal-to-noise ratio simulations. The instrument is based on a 3-mJ pulse-energy erbium-doped glass laser, an 80-mm diameter telescope, an APD optoelectronic receiver and optomechanically adjustable components. In first test measurements, the lidar system has been able to measure a topographic target located over 2 km away. The instrument has also been used in spray drift studies, demonstrating its capability to monitor the temporal and distance evolution of several pesticide clouds emitted by air-assisted sprayers at distances between 50 and 100 m., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R) and EU FEDER. This work was conducted in the framework of the collaboration agreement between the Universitat Politècnica de Catalunya (UPC) and the Universitat de Lleida (UdL) ref. A-00793 for Range-Resolved Remote Sensing of the Concentration of Pesticides in Agroforestry Environments. Alexandre Escolà and Joan Masip from the UdL, and Adolfo Comerón, Alejandro Rodríguez and Jordi Tiana from the UPC, are thanked for their cooperation in preparing this work. Innovació i Recerca Industrial i Sostenible S.L. (IRIS) is thanked for his cooperation in the development of the receiving subsystem.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR and non-LIDAR-based canopy parameters to estimate the leaf area in fruit trees and vineyard

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Planas de Martí, Santiago
  • Román, Carla
  • Rosell Polo, Joan Ramon
This paper is based on two initial hypotheses, firstly, it is proposed that the vegetation volume obtained with a LIDAR-based system or tree row LIDAR volume (TRLV) has a high correlation with the leaf area (LA). Secondly, it is proposed that the projected outer surface or projected tree row surface (PTRS), also LIDAR-based, is linearly related with the LA. The verification of these two hypotheses corresponds to the first two objectives of this work. The third objective is to propose an alternative method, without using LIDAR sensors, simpler and more economical, for in situ LA evaluation. To achieve these objectives a total of 17 blocks of pear, 14 of apple and 26 of vine, in different phenological states, were LIDAR scanned and subsequently manually defoliated. After the field and calculation work, the TRLV and LA were compared. The logarithmic regressions obtained had high correlations. For apple and pear trees the equations are practically the same with R2 of 0.85 and 0.84, respectively. The equation corresponding to vines is somewhat different and has an R2 of 0.86. The regression without species differentiation is 3.66ln(x) +9.65 with R2=0.90. Based on the TRLV, the front and top projected surface areas of each block were then obtained and, using these variables, the PTRS. The linear regressions obtained between PTRS and LA have high correlations with R2 of 0.88, 0.85 and 0.80 for apple trees, pear trees, and vineyard respectively. The three crops show very similar behavior. The straight lines are very close, with very similar slopes. With no species differentiation the linear regression model is y=1.47x - 1.18 with R2=0.93. The starting point of the third objective is to obtain the projected surfaces, frontal and top, without using a LIDAR sensor. These surfaces are not as precise as those obtained with LIDAR and for this reason they are referred to as 'estimated' projected surfaces. To calculate the estimated PTRS without a LIDAR sensor, the height and depth of the vegetation are measured with a tape measure. It is also necessary to make a visual estimation of the frontal gap-fraction. For this, a training method with known gap-fraction pictograms is proposed. The final results with this non-LIDAR method are very similar to those obtained with LIDAR. This method, although it needs human intervention, is simple, easy, economical and precise for in situ LA estimation., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2002-04260-C04-02, AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013- 48297-C2-2-R) and EU FEDER. Funding of Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 646 is also thanked.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Ribes Dasi, Manuel
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Gràcia Aguilà, Felipe José
  • Solanelles Batlle, Francesc
  • Planas de Martí, Santiago
  • Pallejà Cabrè, Tomàs
  • Palacín Roca, Jordi
  • Gregorio López, Eduard
  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of the research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 2. LiDAR technique

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Pesticide spray drift poses health hazards to humans and causes a significant impact on the environment. In this work the capacity of an ad hoc light detection and ranging (LiDAR) system to differentiate spray nozzles according to their potential drift risk is evaluated for the first time. A total of 23 drift potential tests using 10 hollow-cone nozzles were carried out with the sprayer kept in a static position. Drift potential reduction (DPR) values of between 88.6% and 93.6% were obtained when comparing standard and drift reduction nozzle types. It was also possible to order different standard nozzle sizes according to their DPR. The LiDAR signalwas correlated with several droplet size parametersmeasured by a phase Doppler particle analyzer (PDPA), being V100 the best indicator. In the four field tests thatwere performed, the LiDAR systemwas also able to differentiate between standard and drift reduction nozzles under real application conditions, obtaining a DPR of 56.7%. The results of this work demonstrate that the developed LiDAR system is an advantageous alternative for the assessment of drift potential reduction., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. Universitat de Lleida is thanked for Mr. X. Torrent's pre-doctoral fellowship. The authors would like to thank the Unité Mixte de Recherche Information & Technologies for AgroProcess (IRSTEA, Montpellier), and particularly Jean-Paul Douzals and Cyril Tinet for the nozzle characterization using their PDPA. Our thanks are also given to the Institut de Recerca en Tecnologia Agrària (IRTA) for allowing the use of their experimental fields, and to Vicenç Maquinària Agrícola for providing the tractor. The authors also wish to thank A. Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. R. Lavilla, E. Ordoño and F. Solanelles are acknowledged for their assistance in the field work, and J. Arnó is thanked for his help with statistical analysis.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance of an ultrasonic ranging sensor in apple tree canopies

  • Escolà i Agustí, Alexandre
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Gràcia, Felip
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic sensor under laboratory and field conditions in order to provide reliable estimations of distance measurements to apple tree canopies. To this purpose, a methodology has been designed to analyze sensor performance in relation to foliage ranging and to interferences with adjacent sensors when working simultaneously. Results show that the average error in distance measurement using the ultrasonic sensor in laboratory conditions is ±0.53 cm. However, the increase of variability in field conditions reduces the accuracy of this kind of sensors when estimating distances to canopies. The average error in such situations is ±5.11 cm. When analyzing interferences of adjacent sensors 30 cm apart, the average error is ±17.46 cm. When sensors are separated 60 cm, the average error is ±9.29 cm. The ultrasonic sensor tested has been proven to be suitable to estimate distances to the canopy in field conditions when sensors are 60 cm apart or more and could, therefore, be used in a system to estimate structural canopy parameters in precision horticulture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Spray distribution evaluation of different settings of a hand-held-trolley sprayer used in greenhouse tomato crops

  • Llop Casamada, Jordi
  • Gil Moya, Emilio
  • Gallart González-Palacio, Montserrat
  • Contador, Felipe
  • Ercilla-Montserrat, Mireia
Hand-held-trolley sprayers have recently been promoted to improve spray application techniques in greenhouses in south-eastern Spain. However, certain aspects remain to be improved. A modified hand-held-trolley sprayer was evaluated under two different canopy conditions (high and low canopy density) and with several sprayer settings (nozzle type, air assistance and spray volume). In this study, the deposition, coverage and uniformity of distribution of the spray on the canopy have been assessed. RESULTS The deposition on leaves was significantly higher when flat-fan nozzles and air assistance were used at both high and low spray volumes. No differences were detected between the reference system at a high spray volume and the modified trolley at a low spray volume. Flat-fan nozzles with air assistance increased penetrability into the canopy. CONCLUSIONS Air assistance and flat-fan nozzles allow volume rates to be reduced while maintaining or improving spray quality distribution. The working parameters of hand-held sprayers must be considered to reduce environmental risk and increase the efficacy of the spraying process. © 2015 Society of Chemical Industry, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Real-time approaches for characterization of fully and partially scanned canopies in groves

  • Auat Cheein, Fernando
  • Guivant, José
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Yandun, Francisco J.
  • Torres-Torriti, Miguel
  • Rosell Polo, Joan Ramon
Efficient information management in orchard characterization leads to more efficient agricultural processes. In this brief, a set of computational geometry methods are presented and evaluated for orchard characterization; in particular, for the estimation of canopy volume and shape in groves and orchards using a LiDAR (Light Detection And Ranging) sensor mounted on an agricultural service unit. The proposed approaches were evaluated and validated in the field, showing they are convergent in the estimation process and that they are able to estimate the crown volume for fully scanned canopies in real time; for partially observed tree crowns, accuracy decreases up to 30% (the worst case). The latter is the major contribution of this brief since it implies that the automated service unit does not need to cover all alley-ways for an accurate modeling of the orchard, thus saving valuable resources., The authors would like to thank to CONICYT (Chile): FONDECYT Grant 1140575 and Basal Grant FB0008. Also, this research was partially funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds (projects Optidosa-AGL2007-66093-C04-03 and Safespray-AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-tree woody structure reconstruction from mobile terrestrial laser scanner point clouds based on a dual neighbourhood connectivity graph algorithm

  • Méndez, Valeriano
  • Rosell Polo, Joan Ramon
  • Pascual Roca, Miquel
  • Escolà i Agustí, Alexandre
A process is presented for the vector reconstruction of fruit plantations based on the model developed by Verroust and Lazarus. To solve occlusion problems, the use of a dual graph of local and extended connectivity is proposed. The process allows vegetation variables such as the length and volume of the ligneous structure to be measured, enabling studies such as intensity of pruning operations. The process has been tested against simulated models and real trees with different training systems: open-vase system (peach trees) and central leader hedgerow system (pear trees). The cost of the algorithm will be given by the cost of the implementation of Dijkstra's algorithm, which in its standard version is of potential (O(n2)). Algorithm accuracy was checked against point clouds of virtual trees. The reconstruction was also applied before and after a pruning operation of real trees to enable a study of the evolution of the vegetation indices. Results showed the algorithm to be suitable for multi-tree reconstruction of both central leader and open-vase training systems., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects SAFESPRAY: AGL2010-22304-C04-03 and AGVANCE: AGL2013-48297-C2-2-R).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Airborne spray drift measurement using passive collectors and lidar systems

  • Gregorio López, Eduard
  • Solanelles Batlle, Francesc
  • Rocadenbosch Burillo, Francesc
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
Minimization of the risk associated with spray applications requires a proper understanding of the spray drift phenomenon. This fact has led to the development of several techniques to measure the deposition on horizontal surfaces as well as the airborne spray profiles. Assessment of airborne spray drift is particularly difficult because this phenomenon is subject to variable micrometeorological conditions. However the monitoring of airborne drift has a great importance since it can be carried over long distances. This paper reviews main sampling techniques currently used to asses the airborne spray drift, based on passive collectors and tracers. Theoretical principles that determine the efficiency of passive samplers are studied as well as the performance of different types of tracers. On the other hand, this paper shows new airborne spray drift assessment techniques based on lidar technology, reviewing its principle of operation as well as its practical application in several spray drift trials. It is concluded that the lidar technique has significant advantages over conventional methods, especially in terms of time consumption and monitoring capabilities. However, the future adoption of lidar technology for airborne spray drift studies will be subjected to the development of lidar instruments really adapted to this application., The authors wish to acknowledge the MICINN (Spanish Ministry of Science and Innovation) and FEDER funds under the projects AGL2010-22304-C04-03 and TEC2009-09106
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mobile terrestrial laser scanner applications in precision fruticulture/ horticulture and tools to extract information from canopy point clouds

  • Escolà i Agustí, Alexandre
  • Martínez Casasnovas, José Antonio
  • Rufat i Lamarca, Josep
  • Arnó Satorra, Jaume
  • Arbonés, Amadeu
  • Sebé Feixas, Francesc
  • Pascual Roca, Miquel
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
LiDAR sensors are widely used in many areas and, in recent years, that includes agricultural tasks. In this work, a self-developed mobile terrestrial laser scanner based on a 2D light detection and ranging (LiDAR) sensor was used to scan an intensive olive orchard, and different algorithms were developed to estimate canopy volume. Canopy volume estimations derived from LiDAR sensor readings were compared to conventional estimations used in fruticulture/horticulture research and the results prove that they are equivalent with coefficients of correlation ranging from r = 0.56 to r = 0.82 depending on the algorithms used. Additionally, tools related to analysis of point cloud data from the LiDAR-based system are proposed to extract further geometrical and structural information from tree row crop canopies to be offered to farmers and technical advisors as digital raster maps. Having high spatial resolution information on canopy geometry (i.e., height, width and volume) and on canopy structure (i.e., light penetrability, leafiness and porosity) may result in better orchard management decisions. Easily obtainable, reliable information on canopy geometry and structure may favour the development of decision support systems either for irrigation, fertilization or canopy management, as well as for variable rate application of agricultural inputs in the framework of precision fruticulture/horticulture., This work was funded by the Spanish Ministry of Economy and Competitiveness through the projects SAFESPRAY (AGL2010-22304-C04-03) and AgVANCE (AGL2013-48297-C2-2-R) and by the project Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria RTA2012-00059-C02-01.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 1. Classification using indirect methods

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Douzals, Jean-Paul
  • Tinet, Cyril
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Spray drift is one of the main pollution sources identified when pesticides are sprayed on crops. In this work, in order to simplify the evaluation of hollow-cone nozzles according to their drift potential reduction, several models commonly used were tested by three indirect methods: phase Doppler particle analyser (PDPA) and two different wind tunnels. The main aim of this study is then to classify for the first time these hollow-cone nozzle models all of them used in tree crop spraying (3D crops). A comparison between these indirect methods to assess their suitability and to provide guidelines for a spray drift classification of hollow-cone nozzles was carried out. The results show that, in general terms, all methods allow hollow-cone nozzle classifications according to their drift potential reduction (DPR) with a similar trend. Among all the parameters determined with the PDPA, the V100 parameter performed best in differentiating the tested nozzles among drift reduction classes. In the wind tunnel, similar values were obtained for both sedimenting and airborne drift depositions. The V100 parameter displayed a high correlation (up to R2 = 0.948) with the drift potential tested with the wind tunnel. It is concluded that in general, the evaluated indirect methods provide equivalent classification results. Additional studies with a greater variety of nozzle types are required to achieve a proposal of harmonized methodology for testing hollow-cone nozzles., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent, Xavier
  • Gregorio, Eduard
  • Rosell-Polo, Joan R.
  • Arnó, Jaume
  • Peris, Miquel
  • van de Zande, Jan C.
  • Planas, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%–94.42% vs. 39.75%–69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francisco
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Solanelles, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355¿nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220–0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028–0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Relationship between tree row LIDAR-volume and leaf area density for fruit orchards and vineyards obtained with a LIDAR 3D Dynamic Measurement System

  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Planas de Martí, Santiago
In this work, a LIDAR 3D Dynamic Measurement System, based on a Two-Dimensional Terrestrial Laser-LIDAR Scanner (2D TLS), was used for the geometric characterisation of tree-row crops (apple trees, pear trees and vineyards). The trees were scanned with the LIDAR system from opposite sides to obtain two three-dimensional point clouds. The point clouds were registered and the volume occupied by the resulting point cloud, tree row LIDAR-volume (TRLV), was graphically and numerically obtained. The study undertaken in this paper is based on the hypothesis that there may exist a non-linear relationship between the TRLV and the leaf area density (LAD). The main objective is to examine the relationship between TRLV and LAD in vineyards, apple and pear orchards. The study of 35 blocks of vegetation reveals a good logarithmic fit, y = −0.36 ln(x) + 3.69 with R2 = 0.87, between the TRLV (x) in dm3 and the LAD (y) in dm−1. It would appear that the TRLV of the crops under study (planted in a hedgerow-type configuration) is in itself an explanation of the LAD. The competition for light between the leaves and the space that these leaves occupy appear to follow a similar model in the three crops. According to the results of this study, the LAD can be estimated from the TRLV. If the LAD is multiplied by the TRLV, the leaf area of the vegetation under study can be obtained. It is therefore concluded that by using the information provided by the LIDAR 3D Dynamic Measurement System, a good estimation can be obtained of the leaf area in hedgerow fruit tree crops and hedgerow vineyards., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Spatially variable pesticide application in vineyards: Part I, developing a geostatistical approach

  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
  • Uribeetxebarria Alonso de Armiño, Asier
  • Arnó Satorra, Jaume
A geostatistical methodology is presented to optimise the dosage of plant protection products (PPP) in vineyards with spatial variability. Sprayers are commonly used in viticulture to apply a constant volume rate per unit ground area (l ha−1). This can be a problem in vineyard plots with remarkable spatial variability in vine vigour, being necessary guiding winegrowers through a decision-making tool to determine an appropriate uniform volume rate. The leaf area index (LAI), measured by a terrestrial LiDAR scanner at high spatial resolution along crop rows, can be used to determine the optimum volume application rate. The proposed method is based on obtaining different probability maps of LAI by applying an indicator kriging to the original LAI data. As a result, this method allows winegrowers to i) map and locate areas within the plot that, within a given confidence level (70% or 90%), exceed or do not exceed different values (percentiles) of the original LAI, and ii) set the LAI and the corresponding volume rate seeking, for example, to balance the probability (risk) of areas with lower and higher doses than required. In more conservative protection strategies, the method also allows farmers to set the values of LAI and volume rate that greatly minimise the probability of vulnerable areas being underdosed., This work was partially funded by the Ministerio de Economía y Competitividad, Spain [research projects SAFESPRAY - AGL2010-22304-C04-03 and AGVANCE – AGL2013-48297-C2-2-R].
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mapping vineyard leaf area using mobile terrestrial laser scanners: should rows be scanned on-the-go or discontinuosly sampled?

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Company Mesa, Joaquim
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Masip Vilalta, Joan
  • Martínez Casasnovas, José Antonio
  • Arnó Satorra, Jaume
The leaf area index (LAI) is defined as the one-side leaf area per unit ground area, and is probably the most widely used index to characterize grapevine vigor. However, LAI varies spatially within vineyard plots. Mapping and quantifying this variability is very important for improving management decisions and agricultural practices. In this study, a mobile terrestrial laser scanner (MTLS) was used to map the LAI of a vineyard, and then to examine how different scanning methods (on-the-go or discontinuous systematic sampling) may affect the reliability of the resulting raster maps. The use of the MTLS allows calculating the enveloping vegetative area of the canopy, which is the sum of the leaf wall areas for both sides of the row (excluding gaps) and the projected upper area. Obtaining the enveloping areas requires scanning from both sides one meter length section along the row at each systematic sampling point. By converting the enveloping areas into LAI values, a raster map of the latter can be obtained by spatial interpolation (kriging). However, the user can opt for scanning on-the-go in a continuous way and compute 1-m LAI values along the rows, or instead, perform the scanning at discontinuous systematic sampling within the plot. An analysis of correlation between maps indicated that MTLS can be used discontinuously in specific sampling sections separated by up to 15 m along the rows. This capability significantly reduces the amount of data to be acquired at field level, the data storage capacity and the processing power of computers., This work was partially funded by the Spanish Ministry of Economy and Competitiveness (research projects SAFESPRAY—AGL2010-22304-C04-03 and AGVANCE—AGL2013-48297-C2-2-R).