Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 48
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent, Xavier
  • Gregorio, Eduard
  • Rosell-Polo, Joan R.
  • Arnó, Jaume
  • Peris, Miquel
  • van de Zande, Jan C.
  • Planas, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%–94.42% vs. 39.75%–69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Pesticide dose adjustment in fruit and grapevine orchards by DOSA3D: Fundamentals of the system and on-farm validation

  • Román, Carla
  • Peris, Miquel
  • Esteve, Joan
  • Tejerina, Miguel
  • Cambray, Jordi
  • Vilardell, Pere
  • Planas, Santiago
Agricultural productivity cannot be sustained without the application of plant protection measures. Within the framework of integrated pest management (IPM), the use of chemical pesticides should be limited to the last option among the available practices. Even though their use remains common, it carries associated environmental and human health risks. One of the most accepted practices within IPM is the reduction of spraying events and/or pesticide applied doses. DOSA3D is a decision support system that allows the dose to be adjusted to the specific treatment scenario. For this, DOSA3D calculates the optimal application volume rate by estimating the leaf area index and takes into account the overall spraying efficiency and the pest or disease to be controlled. The system adopts specific minimum volume rates for fruit trees and vineyards without compromising the crop health status. To establish the adjusted dose, the labeled or the adviser prescription concentration is kept. Resulting adjusted doses provided by DOSA3D achieved pesticide savings up to 53% in fruit trees and 60% in vineyards. DOSA3D has been validated against the main diseases and pests of fruit trees and vineyards: brown spot and psylla in pear orchards; alternaria blotch disease, apple scab, codling moth, oriental moth and red spider mite in apple orchards; powdery mildew, brown rot, aphids, thrips and mites in peach orchards; and, powdery mildew, yellow spider mite and leafhoppers in grapevine orchards. In addition, a methodology called Green Way is presented to provide consistent and crop safety pesticide doses when these are labeled as concentration or ground area doses., info:eu-repo/semantics/publishedVersion
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A review of methods and applications of the geometric characterization of tree crops in agricultural activities

  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
This paper presents the foundations and applications in agriculture of the main systems used for the geometrical characterization of tree plantations, including systems based on ultrasound, digital photographic techniques, light sensors, high-resolution radar images, high-resolution X-ray computed tomography, stereo vision and LIDAR sensors. Amongst these, LIDAR laser scanners and stereo vision systems are probably the most promising and complementary techniques for achieving 3D pictures and maps of plants and canopies. The information about the geometric properties of plants provided by these techniques has innumerable applications in agriculture. Some important agricultural tasks that can benefit from these plant-geometry characterization techniques are the application of pesticides, irrigation, fertilization and crop training. In the field of pesticide application, knowledge of the geometrical characteristics of plantations will permit a better adjustment of the dose of the product applied, improving the environmental and economic impact. However, it is still necessary to resolve several technological and commercial questions. The former include improving detection systems, especially with regard to developing software for the post-processing steps and improving the speed of calculation and decision making. Amongst the latter, it is essential to produce low cost sensors and control systems in order to facilitate large-scale deployment. Obtaining a precise geometrical characterization of a crop at any point during its production cycle by means of a new generation of affordable and easy-to-use detection systems, such as LIDAR and stereo vision systems, will help to establish precise estimations of crop water needs as well as valuable information that can be used to quantify its nutritional requirements. If accurate, this can provide valuable information on which to base more sustainable irrigation and fertilizer dosages. These would be able to meet crop needs and could also be used as part of specific management systems, based on prescription maps, for the application of variable quantities of water and fertilizers. The availability of measurement tools that allow a precise geometric characterization of plantations will also facilitate and enhance research aimed at developing better crop training systems that ensure an optimal distribution of light within the treetops and higher fruit quality. It is therefore of vital importance to continue devoting major efforts to the development of increasingly accurate, robust and affordable systems capable of measuring the geometric characteristics of plantations, which support the development of the different areas of a sustainable and precision agriculture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02) and Optidosa (AGL2007-66093-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Chueca Adell, Patricia
  • Arnó Satorra, Jaume
  • Solanelles Batlle, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355 nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220-0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028-0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R) and EU FEDER. Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Education are thanked for Mr. Jordi Gené’s predoctoral fellowships (2016FI_B 00669 and FPU15/03355). The authors would like to thank the Institut de Recerca i Tecnologia Agroalimentàries for allowing the use of their experimental fields. The authors also wish to thank F. Camp, A. Escolà, C. Garcerá, F. Gràcia, J. Masip, E. Moltó, I. del Moral, and R. Viana for their assistance in the field work. X. Torrent and S. Planas are also thanked for the nozzle characterization with the PDA. F. Marenco (Met Office, UK) and P. Chazette (LSCE-IPLS, France) are acknowledged for their fruitful comments about lidar calibration.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 1. Classification using indirect methods

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Douzals, Jean-Paul
  • Tinet, Cyril
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Spray drift is one of the main pollution sources identified when pesticides are sprayed on crops. In this work, in order to simplify the evaluation of hollow-cone nozzles according to their drift potential reduction, several models commonly used were tested by three indirect methods: phase Doppler particle analyser (PDPA) and two different wind tunnels. The main aim of this study is then to classify for the first time these hollow-cone nozzle models all of them used in tree crop spraying (3D crops). A comparison between these indirect methods to assess their suitability and to provide guidelines for a spray drift classification of hollow-cone nozzles was carried out. The results show that, in general terms, all methods allow hollow-cone nozzle classifications according to their drift potential reduction (DPR) with a similar trend. Among all the parameters determined with the PDPA, the V100 parameter performed best in differentiating the tested nozzles among drift reduction classes. In the wind tunnel, similar values were obtained for both sedimenting and airborne drift depositions. The V100 parameter displayed a high correlation (up to R2 = 0.948) with the drift potential tested with the wind tunnel. It is concluded that in general, the evaluated indirect methods provide equivalent classification results. Additional studies with a greater variety of nozzle types are required to achieve a proposal of harmonized methodology for testing hollow-cone nozzles., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Setting the optimal length to be scanned in rows of vines by using mobile terrestrial laser scanners

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
Mapping the leaf area index (LAI) by using mobile terrestrial laser scanners (MTLS) is of significance for viticulture. LAI is related to plant vigour and foliar development being an important parameter for many agricultural practices. Since it may present spatial variability within vineyards, it is very interesting monitoring it in an objective repeatable way. Considering the possibility of using on-the-go sensors such as MTLS within an agricultural plot, it is necessary to set a proper length of the row to be scanned at each sample point for a reliable operation of the scanner. Three different row length sections of 0.5, 1, and 2 m have been tested. Data analysis has shown that models required to estimate LAI differ significantly depending on the scanned length of the row; the model required to estimate LAI for short sections (0.5 m) is different from that required for longer sections (1 and 2 m). Of the two models obtained, we recommend using MTLS for scanning row length sections of 1 m because the practical use of the sensor in the field is simplified without compromising the results (there is little variation in the model when the row length section changes from 1 to 2 m). In addition, a sufficient number of sampling points is obtained to support a map of the LAI. Linear regression models using as explanatory variable the tree area index, obtained from the data provided by the scanner, are used to estimate the LAI., The authors acknowledge funding from the Spanish Ministry of Science and Education (OPTIDOSA research project, AGL2007-66093-C04-03) and the ERDF (European Regional Development Fund). The agreement with Codornıu allowing the use of the vineyard in Raimat is also acknowledged
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Hacia un sistema armonizado de ajuste de la dosis en un tratamiento fitosanitario

  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Garcia, F.
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Tradicionalmente, las dosis indicadas en las etiquetas de los envases de los productos fitosanitarios se expresan en función de uno, o muy pocos, de los factores que intervienen en toda aplicación. El camino hacia la racionalización de las dosis pasa por la utilización de un sistema que integre el mayor número de condicionantes permitiendo así el ajuste de la dosis a las condiciones concretas de cada tratamiento., Buena parte de la información contenida en esta comunicación proviene de los resultados alcanzados por los proyectos de investigación AIR ASSISTED SPRAYERS (4FP CE DGVI AIR CT-1304), financiado por el cuarto programa marco europeo de investigación, PULVEXACT (AGL2002-04260) y OPTIDOSA (AGL2007-66093- C04-03), parcialmente financiados por el Plan Nacional de I+D y fondos FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 2. LiDAR technique

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Pesticide spray drift poses health hazards to humans and causes a significant impact on the environment. In this work the capacity of an ad hoc light detection and ranging (LiDAR) system to differentiate spray nozzles according to their potential drift risk is evaluated for the first time. A total of 23 drift potential tests using 10 hollow-cone nozzles were carried out with the sprayer kept in a static position. Drift potential reduction (DPR) values of between 88.6% and 93.6% were obtained when comparing standard and drift reduction nozzle types. It was also possible to order different standard nozzle sizes according to their DPR. The LiDAR signalwas correlated with several droplet size parametersmeasured by a phase Doppler particle analyzer (PDPA), being V100 the best indicator. In the four field tests thatwere performed, the LiDAR systemwas also able to differentiate between standard and drift reduction nozzles under real application conditions, obtaining a DPR of 56.7%. The results of this work demonstrate that the developed LiDAR system is an advantageous alternative for the assessment of drift potential reduction., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. Universitat de Lleida is thanked for Mr. X. Torrent's pre-doctoral fellowship. The authors would like to thank the Unité Mixte de Recherche Information & Technologies for AgroProcess (IRSTEA, Montpellier), and particularly Jean-Paul Douzals and Cyril Tinet for the nozzle characterization using their PDPA. Our thanks are also given to the Institut de Recerca en Tecnologia Agrària (IRTA) for allowing the use of their experimental fields, and to Vicenç Maquinària Agrícola for providing the tractor. The authors also wish to thank A. Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. R. Lavilla, E. Ordoño and F. Solanelles are acknowledged for their assistance in the field work, and J. Arnó is thanked for his help with statistical analysis.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR and non-LIDAR-based canopy parameters to estimate the leaf area in fruit trees and vineyard

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Planas de Martí, Santiago
  • Román, Carla
  • Rosell Polo, Joan Ramon
This paper is based on two initial hypotheses, firstly, it is proposed that the vegetation volume obtained with a LIDAR-based system or tree row LIDAR volume (TRLV) has a high correlation with the leaf area (LA). Secondly, it is proposed that the projected outer surface or projected tree row surface (PTRS), also LIDAR-based, is linearly related with the LA. The verification of these two hypotheses corresponds to the first two objectives of this work. The third objective is to propose an alternative method, without using LIDAR sensors, simpler and more economical, for in situ LA evaluation. To achieve these objectives a total of 17 blocks of pear, 14 of apple and 26 of vine, in different phenological states, were LIDAR scanned and subsequently manually defoliated. After the field and calculation work, the TRLV and LA were compared. The logarithmic regressions obtained had high correlations. For apple and pear trees the equations are practically the same with R2 of 0.85 and 0.84, respectively. The equation corresponding to vines is somewhat different and has an R2 of 0.86. The regression without species differentiation is 3.66ln(x) +9.65 with R2=0.90. Based on the TRLV, the front and top projected surface areas of each block were then obtained and, using these variables, the PTRS. The linear regressions obtained between PTRS and LA have high correlations with R2 of 0.88, 0.85 and 0.80 for apple trees, pear trees, and vineyard respectively. The three crops show very similar behavior. The straight lines are very close, with very similar slopes. With no species differentiation the linear regression model is y=1.47x - 1.18 with R2=0.93. The starting point of the third objective is to obtain the projected surfaces, frontal and top, without using a LIDAR sensor. These surfaces are not as precise as those obtained with LIDAR and for this reason they are referred to as 'estimated' projected surfaces. To calculate the estimated PTRS without a LIDAR sensor, the height and depth of the vegetation are measured with a tape measure. It is also necessary to make a visual estimation of the frontal gap-fraction. For this, a training method with known gap-fraction pictograms is proposed. The final results with this non-LIDAR method are very similar to those obtained with LIDAR. This method, although it needs human intervention, is simple, easy, economical and precise for in situ LA estimation., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2002-04260-C04-02, AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013- 48297-C2-2-R) and EU FEDER. Funding of Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 646 is also thanked.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Relationship between tree row LIDAR-volume and leaf area density for fruit orchards and vineyards obtained with a LIDAR 3D Dynamic Measurement System

  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Planas de Martí, Santiago
In this work, a LIDAR 3D Dynamic Measurement System, based on a Two-Dimensional Terrestrial Laser-LIDAR Scanner (2D TLS), was used for the geometric characterisation of tree-row crops (apple trees, pear trees and vineyards). The trees were scanned with the LIDAR system from opposite sides to obtain two three-dimensional point clouds. The point clouds were registered and the volume occupied by the resulting point cloud, tree row LIDAR-volume (TRLV), was graphically and numerically obtained. The study undertaken in this paper is based on the hypothesis that there may exist a non-linear relationship between the TRLV and the leaf area density (LAD). The main objective is to examine the relationship between TRLV and LAD in vineyards, apple and pear orchards. The study of 35 blocks of vegetation reveals a good logarithmic fit, y = −0.36 ln(x) + 3.69 with R2 = 0.87, between the TRLV (x) in dm3 and the LAD (y) in dm−1. It would appear that the TRLV of the crops under study (planted in a hedgerow-type configuration) is in itself an explanation of the LAD. The competition for light between the leaves and the space that these leaves occupy appear to follow a similar model in the three crops. According to the results of this study, the LAD can be estimated from the TRLV. If the LAD is multiplied by the TRLV, the leaf area of the vegetation under study can be obtained. It is therefore concluded that by using the information provided by the LIDAR 3D Dynamic Measurement System, a good estimation can be obtained of the leaf area in hedgerow fruit tree crops and hedgerow vineyards., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Peris Giner, Miquel
  • van de Zande, Jan C.
  • Planas de Martí, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%-94.42% vs. 39.75%-69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Eye-safe lidar system for pesticide spray drift measurement

  • Gregorio López, Eduard
  • Rocadenbosch Burillo, Francesc
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
Spray drift is one of the main sources of pesticide contamination. For this reason, an accurate understanding of this phenomenon is necessary in order to limit its effects. Nowadays, spray drift is usually studied by using in situ collectors which only allow time-integrated sampling of specific points of the pesticide clouds. Previous research has demonstrated that the light detection and ranging (lidar) technique can be an alternative for spray drift monitoring. This technique enables remote measurement of pesticide clouds with high temporal and distance resolution. Despite these advantages, the fact that no lidar instrument suitable for such an application is presently available has appreciably limited its practical use. This work presents the first eye-safe lidar system specifically designed for the monitoring of pesticide clouds. Parameter design of this system is carried out via signal-to-noise ratio simulations. The instrument is based on a 3-mJ pulse-energy erbium-doped glass laser, an 80-mm diameter telescope, an APD optoelectronic receiver and optomechanically adjustable components. In first test measurements, the lidar system has been able to measure a topographic target located over 2 km away. The instrument has also been used in spray drift studies, demonstrating its capability to monitor the temporal and distance evolution of several pesticide clouds emitted by air-assisted sprayers at distances between 50 and 100 m., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R) and EU FEDER. This work was conducted in the framework of the collaboration agreement between the Universitat Politècnica de Catalunya (UPC) and the Universitat de Lleida (UdL) ref. A-00793 for Range-Resolved Remote Sensing of the Concentration of Pesticides in Agroforestry Environments. Alexandre Escolà and Joan Masip from the UdL, and Adolfo Comerón, Alejandro Rodríguez and Jordi Tiana from the UPC, are thanked for their cooperation in preparing this work. Innovació i Recerca Industrial i Sostenible S.L. (IRIS) is thanked for his cooperation in the development of the receiving subsystem.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Pesticide dose adjustment in fruit and grapevine orchards by DOSA3D: Fundamentals of the system and on-farm validation

  • Román, Carla
  • Peris Giner, Miquel
  • Esteve, Joan
  • Tejerina, Miguel
  • Cambray, Jordi
  • Vilardell i Coderch, Pere
  • Planas de Martí, Santiago
Agricultural productivity cannot be sustained without the application of plant protection measures. Within the framework of integrated pest management (IPM), the use of chemical pesticides should be limited to the last option among the available practices. Even though their use remains common, it carries associated environmental and human health risks. One of the most accepted practices within IPM is the reduction of spraying events and/or pesticide applied doses. DOSA3D is a decision support system that allows the dose to be adjusted to the specific treatment scenario. For this, DOSA3D calculates the optimal application volume rate by estimating the leaf area index and takes into account the overall spraying efficiency and the pest or disease to be controlled. The system adopts specific minimum volume rates for fruit trees and vineyards without compromising the crop health status. To establish the adjusted dose, the labeled or the adviser prescription concentration is kept. Resulting adjusted doses provided by DOSA3D achieved pesticide savings up to 53% in fruit trees and 60% in vineyards. DOSA3D has been validated against the main diseases and pests of fruit trees and vineyards: brown spot and psylla in pear orchards; alternaria blotch disease, apple scab, codling moth, oriental moth and red spider mite in apple orchards; powdery mildew, brown rot, aphids, thrips and mites in peach orchards; and, powdery mildew, yellow spider mite and leafhoppers in grapevine orchards. In addition, a methodology called Green Way is presented to provide consistent and crop safety pesticide doses when these are labeled as concentration or ground area doses., his study wasfinanced by the EU Horizon 2020 project EUCLID[grant number 633999], the Spanish Ministry of Economy and Compet-itiveness project AgVance [AGL2013-48297-C2-2-R] and the SpanishMinistry of Agriculture, Fisheries and Food project GOPHYTOVID [con-tract 2018002001192]. We are also grateful for funding by theSecretaria d'Universitats i Recerca del Departament d'Empresa iConeixement de la Generalitat de Catalunya under Grant 2017 SGR 646
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Leaf area index estimation in vineyards using a ground-based LiDAR scanner

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Vallès Petit, Josep Maria
  • Llorens Calveras, Jordi
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Palacín Roca, Jordi
  • Rosell Polo, Joan Ramon
Estimation of grapevine vigour using mobile proximal sensors can provide an indirect method for determining grape yield and quality. Of the various indexes related to the characteristics of grapevine foliage, the leaf area index (LAI) is probably the most widely used in viticulture. To assess the feasibility of using light detection and ranging (LiDAR) sensors for predicting the LAI, several field trials were performed using a tractor-mounted LiDAR system. This system measured the crop in a transverse direction along the rows of vines and geometric and structural parameters were computed. The parameters evaluated were the height of the vines (H), the cross-sectional area (A), the canopy volume (V) and the tree area index (TAI). This last parameter was formulated as the ratio of the crop estimated area per unit ground area, using a local Poisson distribution to approximate the laser beam transmission probability within vines. In order to compare the calculated indexes with the actual values of LAI, the scanned vines were defoliated to obtain LAI values for different row sections. Linear regression analysis showed a good correlation (R 2 = 0.81) between canopy volume and the measured values of LAI for 1 m long sections. Nevertheless, the best estimation of the LAI was given by the TAI (R 2 = 0.92) for the same length, confirming LiDAR sensors as an interesting option for foliage characterization of grapevines. However, current limitations exist related to the complexity of data process and to the need to accumulate a sufficient number of scans to adequately estimate the LAI., This research was funded by ERDF (European Regional Development Fund) and the Spanish Ministry of Science and Education (Agreement No. AGL2002-04260-C04-02, and acronym PULVEXACT, and Agreement No. AGL2007-66093-C04-03, and acronym OPTIDOSA)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation

  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Gil Moya, Emilio
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Llorens Calveras, Jordi
  • Solanelles Batlle, Francesc
Discussions in recent decades about dosage models for applying plant protection products in orchards have failed to reach a compromise solution. Furthermore, canopies are spatially variable, and a uniform dose may not be adequate for the entire orchard. Spraying at an adequate volume application rate on a site-specific basis would help reduce the amount of agrochemicals used in the framework of precision horticulture and precision fructiculture. An orchard sprayer prototype running a variable-rate algorithm to adapt the volume application rate to the canopy volume in orchards on a real-time and continuous basis was designed, implemented, and validated. An equivalent prototype was designed for vineyards and described in a companion paper (‘Variable rate sprayer. Part 2 – Vineyard prototype: Design, implementation and validation’). The orchard prototype was divided into three parts: the canopy characterization system (using a LiDAR sensor), the controller executing a variable-rate algorithm, and the actuators. The controller determines the intended flow rate by using an application coefficient (required liquid volume per unit canopy volume) to convert canopy volume into a flow rate. The sprayed flow rates are adjusted via electromagnetic variable-rate valves. The goal of the prototype was to keep the actual application coefficients as close as possible to the objective. Strong relationships were observed between the intended and the sprayed flow rates (R2 = 0.935) and between the canopy cross-sectional areas and the sprayed flow rates (R2 = 0.926). In addition, when spraying in variable-rate mode, the prototype achieved significantly closer application coefficient values to the objective than those obtained in conventional spraying application mode., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03), and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Ribes Dasi, Manuel
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Gràcia Aguilà, Felipe José
  • Solanelles Batlle, Francesc
  • Planas de Martí, Santiago
  • Pallejà Cabrè, Tomàs
  • Palacín Roca, Jordi
  • Gregorio López, Eduard
  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of the research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Real-time approaches for characterization of fully and partially scanned canopies in groves

  • Auat Cheein, Fernando
  • Guivant, José
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Yandun, Francisco J.
  • Torres-Torriti, Miguel
  • Rosell Polo, Joan Ramon
Efficient information management in orchard characterization leads to more efficient agricultural processes. In this brief, a set of computational geometry methods are presented and evaluated for orchard characterization; in particular, for the estimation of canopy volume and shape in groves and orchards using a LiDAR (Light Detection And Ranging) sensor mounted on an agricultural service unit. The proposed approaches were evaluated and validated in the field, showing they are convergent in the estimation process and that they are able to estimate the crown volume for fully scanned canopies in real time; for partially observed tree crowns, accuracy decreases up to 30% (the worst case). The latter is the major contribution of this brief since it implies that the automated service unit does not need to cover all alley-ways for an accurate modeling of the orchard, thus saving valuable resources., The authors would like to thank to CONICYT (Chile): FONDECYT Grant 1140575 and Basal Grant FB0008. Also, this research was partially funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds (projects Optidosa-AGL2007-66093-C04-03 and Safespray-AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Lidar: towards a new methodology for field measurement of spray drift

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Solanelles Batlle, Francesc
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Masip Vilalta, Joan
  • Ribes Dasi, Manuel
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Lidar technology is becoming a promising alternative for spray drift measurement to the labour and time-expensive methodologies based on the ISO 22866 standard. This paper presents last advancements in an eye-safe lidar system specifically designed for drift monitoring. The lidar system was tested with an air-assisted sprayer in two cases: with standard hollow cone and air induction low-drift nozzles. The remaining variables (flow rate, environmental conditions,…) were similar. Lidar measurements allowed to know the time evolution of spray drift clouds and showed a much higher droplet concentration, dwelling time and dimensions for the cloud generated by standard nozzles. Also, the ability of the lidar system to distinguish different nozzle types according to their drift potential was proved. Finally, staring (laser beam stationary through the drift cloud) and 2D scanning measurements are discussed as starting points for an alternative spray drift measurement methodology., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03 and AGL2013-48297-C2-2- R) and EU FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Performance of an ultrasonic ranging sensor in apple tree canopies

  • Escolà i Agustí, Alexandre
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Gràcia, Felip
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic sensor under laboratory and field conditions in order to provide reliable estimations of distance measurements to apple tree canopies. To this purpose, a methodology has been designed to analyze sensor performance in relation to foliage ranging and to interferences with adjacent sensors when working simultaneously. Results show that the average error in distance measurement using the ultrasonic sensor in laboratory conditions is ±0.53 cm. However, the increase of variability in field conditions reduces the accuracy of this kind of sensors when estimating distances to canopies. The average error in such situations is ±5.11 cm. When analyzing interferences of adjacent sensors 30 cm apart, the average error is ±17.46 cm. When sensors are separated 60 cm, the average error is ±9.29 cm. The ultrasonic sensor tested has been proven to be suitable to estimate distances to the canopy in field conditions when sensors are 60 cm apart or more and could, therefore, be used in a system to estimate structural canopy parameters in precision horticulture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Influence of the scanned side of the row in terrestrial laser sensor applications in vineyards: practical consequences

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Masip Vilalta, Joan
  • Rosell Polo, Joan Ramon
Terrestrial laser scanners (TLS) have been used to estimate leaf area and optimise the site-specific management in vineyards. The tree area index (TAI) is a parameter that can be obtained from TLS measurements and has been highly successful in predicting the leaf area index (LAI) in vineyards using linear regression models. However, there are concerns about the possible variation of the models according to the row side on which the scan is performed. A field trial was performed in a North–South oriented vineyard using a tractor-mounted LiDAR system to determine the influence of this operational factor. Four vineyard blocks were scanned from both sides and then defoliated to obtain the real LAI values for 1 m row length sections. Specifically, LAI values were obtained considering the total canopy width and, after separation of the leaves of the right and left sides, LAI values of half canopy were also calculated. To estimate the LAI from the TAI, dummy-variable regression models were used which showed no differences with respect to the scanned side of the canopy. Two consequences are immediate. First, TLS made it possible the LAI mapping of two different rows by scanning from the alley-way with an appropriate laser scanner. Secondly, the same model can be used to estimate the LAI of half canopy (right or left) in operations that require going through all inter-rows (e.g., when applying plant protection products in a vineyard to estimate the vegetation exposed to the sprayer)., The authors acknowledge funding from the ERDF (European Regional Development Fund) and the Spanish Ministry of Science and Education (OPTIDOSA research project, AGL2007-66093-C04-03).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Georeferenced Scanning System to Estimate the Leaf Wall Area in Tree Crops

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Company Mesa, Joaquim
This paper presents the use of a terrestrial light detection and ranging (LiDAR) system to scan the vegetation of tree crops to estimate the so-called pixelated leaf wall area (PLWA). Scanning rows laterally and considering only the half-canopy vegetation to the line of the trunks, PLWA refers to the vertical projected area without gaps detected by LiDAR. As defined, PLWA may be different depending on the side from which the LiDAR is applied. The system is completed by a real-time kinematic global positioning system (RTK-GPS) sensor and an inertial measurement unit (IMU) sensor for positioning. At the end, a total leaf wall area (LWA) is computed and assigned to the X, Y position of each vertical scan. The final value of the area depends on the distance between two consecutive scans (or horizontal resolution), as well as the number of intercepted points within each scan, since PLWA is only computed when the laser beam detects vegetation. To verify system performance, tests were conducted related to the georeferencing task and synchronization problems between GPS time and central processing unit (CPU) time. Despite this, the overall accuracy of the system is generally acceptable. The Leaf Area Index (LAI) can then be estimated using PLWA as an explanatory variable in appropriate linear regression models., This work was funded by the Spanish Ministry of Economy and Competitiveness and by the European Union through its FEDER funds; it is a part of the Optidosa (AGL2007-66093-C04-03), Safespray (AGL2010-22304-C04-03) and Agvance (AGL2013-48297-C2-2-R) research projects.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Solanelles, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355¿nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220–0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028–0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A review of methods and applications of the geometric characterization of tree crops in agricultural activities

  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
This paper presents the foundations and applications in agriculture of the main systems used for the geometrical characterization of tree plantations, including systems based on ultrasound, digital photographic techniques, light sensors, high-resolution radar images, high-resolution X-ray computed tomography, stereo vision and LIDAR sensors. Amongst these, LIDAR laser scanners and stereo vision systems are probably the most promising and complementary techniques for achieving 3D pictures and maps of plants and canopies. The information about the geometric properties of plants provided by these techniques has innumerable applications in agriculture. Some important agricultural tasks that can benefit from these plant-geometry characterization techniques are the application of pesticides, irrigation, fertilization and crop training. In the field of pesticide application, knowledge of the geometrical characteristics of plantations will permit a better adjustment of the dose of the product applied, improving the environmental and economic impact. However, it is still necessary to resolve several technological and commercial questions. The former include improving detection systems, especially with regard to developing software for the post-processing steps and improving the speed of calculation and decision making. Amongst the latter, it is essential to produce low cost sensors and control systems in order to facilitate large-scale deployment. Obtaining a precise geometrical characterization of a crop at any point during its production cycle by means of a new generation of affordable and easy-to-use detection systems, such as LIDAR and stereo vision systems, will help to establish precise estimations of crop water needs as well as valuable information that can be used to quantify its nutritional requirements. If accurate, this can provide valuable information on which to base more sustainable irrigation and fertilizer dosages. These would be able to meet crop needs and could also be used as part of specific management systems, based on prescription maps, for the application of variable quantities of water and fertilizers. The availability of measurement tools that allow a precise geometric characterization of plantations will also facilitate and enhance research aimed at developing better crop training systems that ensure an optimal distribution of light within the treetops and higher fruit quality. It is therefore of vital importance to continue devoting major efforts to the development of increasingly accurate, robust and affordable systems capable of measuring the geometric characteristics of plantations, which support the development of the different areas of a sustainable and precision agriculture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02) and Optidosa (AGL2007-66093-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lidar: towards a new methodology for field measurement of spray drift

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Solanelles Batlle, Francesc
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Masip Vilalta, Joan
  • Ribes Dasi, Manuel
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Lidar technology is becoming a promising alternative for spray drift measurement to the labour and time-expensive methodologies based on the ISO 22866 standard. This paper presents last advancements in an eye-safe lidar system specifically designed for drift monitoring. The lidar system was tested with an air-assisted sprayer in two cases: with standard hollow cone and air induction low-drift nozzles. The remaining variables (flow rate, environmental conditions,…) were similar. Lidar measurements allowed to know the time evolution of spray drift clouds and showed a much higher droplet concentration, dwelling time and dimensions for the cloud generated by standard nozzles. Also, the ability of the lidar system to distinguish different nozzle types according to their drift potential was proved. Finally, staring (laser beam stationary through the drift cloud) and 2D scanning measurements are discussed as starting points for an alternative spray drift measurement methodology., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03 and AGL2013-48297-C2-2- R) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Peris Giner, Miquel
  • van de Zande, Jan C.
  • Planas de Martí, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%-94.42% vs. 39.75%-69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Georeferenced Scanning System to Estimate the Leaf Wall Area in Tree Crops

  • Moral Martínez, Ignacio del
  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Company Mesa, Joaquim
This paper presents the use of a terrestrial light detection and ranging (LiDAR) system to scan the vegetation of tree crops to estimate the so-called pixelated leaf wall area (PLWA). Scanning rows laterally and considering only the half-canopy vegetation to the line of the trunks, PLWA refers to the vertical projected area without gaps detected by LiDAR. As defined, PLWA may be different depending on the side from which the LiDAR is applied. The system is completed by a real-time kinematic global positioning system (RTK-GPS) sensor and an inertial measurement unit (IMU) sensor for positioning. At the end, a total leaf wall area (LWA) is computed and assigned to the X, Y position of each vertical scan. The final value of the area depends on the distance between two consecutive scans (or horizontal resolution), as well as the number of intercepted points within each scan, since PLWA is only computed when the laser beam detects vegetation. To verify system performance, tests were conducted related to the georeferencing task and synchronization problems between GPS time and central processing unit (CPU) time. Despite this, the overall accuracy of the system is generally acceptable. The Leaf Area Index (LAI) can then be estimated using PLWA as an explanatory variable in appropriate linear regression models., This work was funded by the Spanish Ministry of Economy and Competitiveness and by the European Union through its FEDER funds; it is a part of the Optidosa (AGL2007-66093-C04-03), Safespray (AGL2010-22304-C04-03) and Agvance (AGL2013-48297-C2-2-R) research projects.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation

  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Gil Moya, Emilio
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Llorens Calveras, Jordi
  • Solanelles Batlle, Francesc
Discussions in recent decades about dosage models for applying plant protection products in orchards have failed to reach a compromise solution. Furthermore, canopies are spatially variable, and a uniform dose may not be adequate for the entire orchard. Spraying at an adequate volume application rate on a site-specific basis would help reduce the amount of agrochemicals used in the framework of precision horticulture and precision fructiculture. An orchard sprayer prototype running a variable-rate algorithm to adapt the volume application rate to the canopy volume in orchards on a real-time and continuous basis was designed, implemented, and validated. An equivalent prototype was designed for vineyards and described in a companion paper (‘Variable rate sprayer. Part 2 – Vineyard prototype: Design, implementation and validation’). The orchard prototype was divided into three parts: the canopy characterization system (using a LiDAR sensor), the controller executing a variable-rate algorithm, and the actuators. The controller determines the intended flow rate by using an application coefficient (required liquid volume per unit canopy volume) to convert canopy volume into a flow rate. The sprayed flow rates are adjusted via electromagnetic variable-rate valves. The goal of the prototype was to keep the actual application coefficients as close as possible to the objective. Strong relationships were observed between the intended and the sprayed flow rates (R2 = 0.935) and between the canopy cross-sectional areas and the sprayed flow rates (R2 = 0.926). In addition, when spraying in variable-rate mode, the prototype achieved significantly closer application coefficient values to the objective than those obtained in conventional spraying application mode., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03), and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Leaf area index estimation in vineyards using a ground-based LiDAR scanner

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Vallès Petit, Josep Maria
  • Llorens Calveras, Jordi
  • Sanz Cortiella, Ricardo
  • Masip Vilalta, Joan
  • Palacín Roca, Jordi
  • Rosell Polo, Joan Ramon
Estimation of grapevine vigour using mobile proximal sensors can provide an indirect method for determining grape yield and quality. Of the various indexes related to the characteristics of grapevine foliage, the leaf area index (LAI) is probably the most widely used in viticulture. To assess the feasibility of using light detection and ranging (LiDAR) sensors for predicting the LAI, several field trials were performed using a tractor-mounted LiDAR system. This system measured the crop in a transverse direction along the rows of vines and geometric and structural parameters were computed. The parameters evaluated were the height of the vines (H), the cross-sectional area (A), the canopy volume (V) and the tree area index (TAI). This last parameter was formulated as the ratio of the crop estimated area per unit ground area, using a local Poisson distribution to approximate the laser beam transmission probability within vines. In order to compare the calculated indexes with the actual values of LAI, the scanned vines were defoliated to obtain LAI values for different row sections. Linear regression analysis showed a good correlation (R 2 = 0.81) between canopy volume and the measured values of LAI for 1 m long sections. Nevertheless, the best estimation of the LAI was given by the TAI (R 2 = 0.92) for the same length, confirming LiDAR sensors as an interesting option for foliage characterization of grapevines. However, current limitations exist related to the complexity of data process and to the need to accumulate a sufficient number of scans to adequately estimate the LAI., This research was funded by ERDF (European Regional Development Fund) and the Spanish Ministry of Science and Education (Agreement No. AGL2002-04260-C04-02, and acronym PULVEXACT, and Agreement No. AGL2007-66093-C04-03, and acronym OPTIDOSA)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio López, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Chueca Adell, Patricia
  • Arnó Satorra, Jaume
  • Solanelles Batlle, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355 nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220-0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028-0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R) and EU FEDER. Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Education are thanked for Mr. Jordi Gené’s predoctoral fellowships (2016FI_B 00669 and FPU15/03355). The authors would like to thank the Institut de Recerca i Tecnologia Agroalimentàries for allowing the use of their experimental fields. The authors also wish to thank F. Camp, A. Escolà, C. Garcerá, F. Gràcia, J. Masip, E. Moltó, I. del Moral, and R. Viana for their assistance in the field work. X. Torrent and S. Planas are also thanked for the nozzle characterization with the PDA. F. Marenco (Met Office, UK) and P. Chazette (LSCE-IPLS, France) are acknowledged for their fruitful comments about lidar calibration.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Eye-safe lidar system for pesticide spray drift measurement

  • Gregorio López, Eduard
  • Rocadenbosch Burillo, Francesc
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
Spray drift is one of the main sources of pesticide contamination. For this reason, an accurate understanding of this phenomenon is necessary in order to limit its effects. Nowadays, spray drift is usually studied by using in situ collectors which only allow time-integrated sampling of specific points of the pesticide clouds. Previous research has demonstrated that the light detection and ranging (lidar) technique can be an alternative for spray drift monitoring. This technique enables remote measurement of pesticide clouds with high temporal and distance resolution. Despite these advantages, the fact that no lidar instrument suitable for such an application is presently available has appreciably limited its practical use. This work presents the first eye-safe lidar system specifically designed for the monitoring of pesticide clouds. Parameter design of this system is carried out via signal-to-noise ratio simulations. The instrument is based on a 3-mJ pulse-energy erbium-doped glass laser, an 80-mm diameter telescope, an APD optoelectronic receiver and optomechanically adjustable components. In first test measurements, the lidar system has been able to measure a topographic target located over 2 km away. The instrument has also been used in spray drift studies, demonstrating its capability to monitor the temporal and distance evolution of several pesticide clouds emitted by air-assisted sprayers at distances between 50 and 100 m., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R) and EU FEDER. This work was conducted in the framework of the collaboration agreement between the Universitat Politècnica de Catalunya (UPC) and the Universitat de Lleida (UdL) ref. A-00793 for Range-Resolved Remote Sensing of the Concentration of Pesticides in Agroforestry Environments. Alexandre Escolà and Joan Masip from the UdL, and Adolfo Comerón, Alejandro Rodríguez and Jordi Tiana from the UPC, are thanked for their cooperation in preparing this work. Innovació i Recerca Industrial i Sostenible S.L. (IRIS) is thanked for his cooperation in the development of the receiving subsystem.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the scanned side of the row in terrestrial laser sensor applications in vineyards: practical consequences

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Masip Vilalta, Joan
  • Rosell Polo, Joan Ramon
Terrestrial laser scanners (TLS) have been used to estimate leaf area and optimise the site-specific management in vineyards. The tree area index (TAI) is a parameter that can be obtained from TLS measurements and has been highly successful in predicting the leaf area index (LAI) in vineyards using linear regression models. However, there are concerns about the possible variation of the models according to the row side on which the scan is performed. A field trial was performed in a North–South oriented vineyard using a tractor-mounted LiDAR system to determine the influence of this operational factor. Four vineyard blocks were scanned from both sides and then defoliated to obtain the real LAI values for 1 m row length sections. Specifically, LAI values were obtained considering the total canopy width and, after separation of the leaves of the right and left sides, LAI values of half canopy were also calculated. To estimate the LAI from the TAI, dummy-variable regression models were used which showed no differences with respect to the scanned side of the canopy. Two consequences are immediate. First, TLS made it possible the LAI mapping of two different rows by scanning from the alley-way with an appropriate laser scanner. Secondly, the same model can be used to estimate the LAI of half canopy (right or left) in operations that require going through all inter-rows (e.g., when applying plant protection products in a vineyard to estimate the vegetation exposed to the sprayer)., The authors acknowledge funding from the ERDF (European Regional Development Fund) and the Spanish Ministry of Science and Education (OPTIDOSA research project, AGL2007-66093-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Setting the optimal length to be scanned in rows of vines by using mobile terrestrial laser scanners

  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
Mapping the leaf area index (LAI) by using mobile terrestrial laser scanners (MTLS) is of significance for viticulture. LAI is related to plant vigour and foliar development being an important parameter for many agricultural practices. Since it may present spatial variability within vineyards, it is very interesting monitoring it in an objective repeatable way. Considering the possibility of using on-the-go sensors such as MTLS within an agricultural plot, it is necessary to set a proper length of the row to be scanned at each sample point for a reliable operation of the scanner. Three different row length sections of 0.5, 1, and 2 m have been tested. Data analysis has shown that models required to estimate LAI differ significantly depending on the scanned length of the row; the model required to estimate LAI for short sections (0.5 m) is different from that required for longer sections (1 and 2 m). Of the two models obtained, we recommend using MTLS for scanning row length sections of 1 m because the practical use of the sensor in the field is simplified without compromising the results (there is little variation in the model when the row length section changes from 1 to 2 m). In addition, a sufficient number of sampling points is obtained to support a map of the LAI. Linear regression models using as explanatory variable the tree area index, obtained from the data provided by the scanner, are used to estimate the LAI., The authors acknowledge funding from the Spanish Ministry of Science and Education (OPTIDOSA research project, AGL2007-66093-C04-03) and the ERDF (European Regional Development Fund). The agreement with Codornıu allowing the use of the vineyard in Raimat is also acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR and non-LIDAR-based canopy parameters to estimate the leaf area in fruit trees and vineyard

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Planas de Martí, Santiago
  • Román, Carla
  • Rosell Polo, Joan Ramon
This paper is based on two initial hypotheses, firstly, it is proposed that the vegetation volume obtained with a LIDAR-based system or tree row LIDAR volume (TRLV) has a high correlation with the leaf area (LA). Secondly, it is proposed that the projected outer surface or projected tree row surface (PTRS), also LIDAR-based, is linearly related with the LA. The verification of these two hypotheses corresponds to the first two objectives of this work. The third objective is to propose an alternative method, without using LIDAR sensors, simpler and more economical, for in situ LA evaluation. To achieve these objectives a total of 17 blocks of pear, 14 of apple and 26 of vine, in different phenological states, were LIDAR scanned and subsequently manually defoliated. After the field and calculation work, the TRLV and LA were compared. The logarithmic regressions obtained had high correlations. For apple and pear trees the equations are practically the same with R2 of 0.85 and 0.84, respectively. The equation corresponding to vines is somewhat different and has an R2 of 0.86. The regression without species differentiation is 3.66ln(x) +9.65 with R2=0.90. Based on the TRLV, the front and top projected surface areas of each block were then obtained and, using these variables, the PTRS. The linear regressions obtained between PTRS and LA have high correlations with R2 of 0.88, 0.85 and 0.80 for apple trees, pear trees, and vineyard respectively. The three crops show very similar behavior. The straight lines are very close, with very similar slopes. With no species differentiation the linear regression model is y=1.47x - 1.18 with R2=0.93. The starting point of the third objective is to obtain the projected surfaces, frontal and top, without using a LIDAR sensor. These surfaces are not as precise as those obtained with LIDAR and for this reason they are referred to as 'estimated' projected surfaces. To calculate the estimated PTRS without a LIDAR sensor, the height and depth of the vegetation are measured with a tape measure. It is also necessary to make a visual estimation of the frontal gap-fraction. For this, a training method with known gap-fraction pictograms is proposed. The final results with this non-LIDAR method are very similar to those obtained with LIDAR. This method, although it needs human intervention, is simple, easy, economical and precise for in situ LA estimation., This research was partially funded by the Spanish Ministry of Economy and Competitiveness (projects AGL2002-04260-C04-02, AGL2007-66093-C04-03, AGL2010-22304-C04-03 and AGL2013- 48297-C2-2-R) and EU FEDER. Funding of Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 646 is also thanked.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

  • Sanz Cortiella, Ricardo
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
  • Ribes Dasi, Manuel
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Gràcia Aguilà, Felipe José
  • Solanelles Batlle, Francesc
  • Planas de Martí, Santiago
  • Pallejà Cabrè, Tomàs
  • Palacín Roca, Jordi
  • Gregorio López, Eduard
  • Del Moral Martínez, Ignacio
  • Rosell Polo, Joan Ramon
In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of the research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 2. LiDAR technique

  • Gregorio López, Eduard
  • Torrent Martí, Xavier
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
Pesticide spray drift poses health hazards to humans and causes a significant impact on the environment. In this work the capacity of an ad hoc light detection and ranging (LiDAR) system to differentiate spray nozzles according to their potential drift risk is evaluated for the first time. A total of 23 drift potential tests using 10 hollow-cone nozzles were carried out with the sprayer kept in a static position. Drift potential reduction (DPR) values of between 88.6% and 93.6% were obtained when comparing standard and drift reduction nozzle types. It was also possible to order different standard nozzle sizes according to their DPR. The LiDAR signalwas correlated with several droplet size parametersmeasured by a phase Doppler particle analyzer (PDPA), being V100 the best indicator. In the four field tests thatwere performed, the LiDAR systemwas also able to differentiate between standard and drift reduction nozzles under real application conditions, obtaining a DPR of 56.7%. The results of this work demonstrate that the developed LiDAR system is an advantageous alternative for the assessment of drift potential reduction., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. Universitat de Lleida is thanked for Mr. X. Torrent's pre-doctoral fellowship. The authors would like to thank the Unité Mixte de Recherche Information & Technologies for AgroProcess (IRSTEA, Montpellier), and particularly Jean-Paul Douzals and Cyril Tinet for the nozzle characterization using their PDPA. Our thanks are also given to the Institut de Recerca en Tecnologia Agrària (IRTA) for allowing the use of their experimental fields, and to Vicenç Maquinària Agrícola for providing the tractor. The authors also wish to thank A. Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. R. Lavilla, E. Ordoño and F. Solanelles are acknowledged for their assistance in the field work, and J. Arnó is thanked for his help with statistical analysis.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hacia un sistema armonizado de ajuste de la dosis en un tratamiento fitosanitario

  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Garcia, F.
  • Escolà i Agustí, Alexandre
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Tradicionalmente, las dosis indicadas en las etiquetas de los envases de los productos fitosanitarios se expresan en función de uno, o muy pocos, de los factores que intervienen en toda aplicación. El camino hacia la racionalización de las dosis pasa por la utilización de un sistema que integre el mayor número de condicionantes permitiendo así el ajuste de la dosis a las condiciones concretas de cada tratamiento., Buena parte de la información contenida en esta comunicación proviene de los resultados alcanzados por los proyectos de investigación AIR ASSISTED SPRAYERS (4FP CE DGVI AIR CT-1304), financiado por el cuarto programa marco europeo de investigación, PULVEXACT (AGL2002-04260) y OPTIDOSA (AGL2007-66093- C04-03), parcialmente financiados por el Plan Nacional de I+D y fondos FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance of an ultrasonic ranging sensor in apple tree canopies

  • Escolà i Agustí, Alexandre
  • Planas de Martí, Santiago
  • Rosell Polo, Joan Ramon
  • Pomar Gomà, Jesús
  • Camp, Ferran
  • Solanelles Batlle, Francesc
  • Gràcia, Felip
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic sensor under laboratory and field conditions in order to provide reliable estimations of distance measurements to apple tree canopies. To this purpose, a methodology has been designed to analyze sensor performance in relation to foliage ranging and to interferences with adjacent sensors when working simultaneously. Results show that the average error in distance measurement using the ultrasonic sensor in laboratory conditions is ±0.53 cm. However, the increase of variability in field conditions reduces the accuracy of this kind of sensors when estimating distances to canopies. The average error in such situations is ±5.11 cm. When analyzing interferences of adjacent sensors 30 cm apart, the average error is ±17.46 cm. When sensors are separated 60 cm, the average error is ±9.29 cm. The ultrasonic sensor tested has been proven to be suitable to estimate distances to the canopy in field conditions when sensors are 60 cm apart or more and could, therefore, be used in a system to estimate structural canopy parameters in precision horticulture., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Real-time approaches for characterization of fully and partially scanned canopies in groves

  • Auat Cheein, Fernando
  • Guivant, José
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Yandun, Francisco J.
  • Torres-Torriti, Miguel
  • Rosell Polo, Joan Ramon
Efficient information management in orchard characterization leads to more efficient agricultural processes. In this brief, a set of computational geometry methods are presented and evaluated for orchard characterization; in particular, for the estimation of canopy volume and shape in groves and orchards using a LiDAR (Light Detection And Ranging) sensor mounted on an agricultural service unit. The proposed approaches were evaluated and validated in the field, showing they are convergent in the estimation process and that they are able to estimate the crown volume for fully scanned canopies in real time; for partially observed tree crowns, accuracy decreases up to 30% (the worst case). The latter is the major contribution of this brief since it implies that the automated service unit does not need to cover all alley-ways for an accurate modeling of the orchard, thus saving valuable resources., The authors would like to thank to CONICYT (Chile): FONDECYT Grant 1140575 and Basal Grant FB0008. Also, this research was partially funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds (projects Optidosa-AGL2007-66093-C04-03 and Safespray-AGL2010-22304-C04-03).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of spray drift potential reduction for hollow-cone nozzles: Part 1. Classification using indirect methods

  • Torrent Martí, Xavier
  • Gregorio López, Eduard
  • Douzals, Jean-Paul
  • Tinet, Cyril
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
Spray drift is one of the main pollution sources identified when pesticides are sprayed on crops. In this work, in order to simplify the evaluation of hollow-cone nozzles according to their drift potential reduction, several models commonly used were tested by three indirect methods: phase Doppler particle analyser (PDPA) and two different wind tunnels. The main aim of this study is then to classify for the first time these hollow-cone nozzle models all of them used in tree crop spraying (3D crops). A comparison between these indirect methods to assess their suitability and to provide guidelines for a spray drift classification of hollow-cone nozzles was carried out. The results show that, in general terms, all methods allow hollow-cone nozzle classifications according to their drift potential reduction (DPR) with a similar trend. Among all the parameters determined with the PDPA, the V100 parameter performed best in differentiating the tested nozzles among drift reduction classes. In the wind tunnel, similar values were obtained for both sedimenting and airborne drift depositions. The V100 parameter displayed a high correlation (up to R2 = 0.948) with the drift potential tested with the wind tunnel. It is concluded that in general, the evaluated indirect methods provide equivalent classification results. Additional studies with a greater variety of nozzle types are required to achieve a proposal of harmonized methodology for testing hollow-cone nozzles., This work was partly funded by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF) under Grants 2017 SGR 646, AGL2007-66093-C04-03, AGL2010-22304-04-C03-03, and AGL2013-48297-C2-2-R. The authors also wish to thank Mr. Antonio Checa (Randex Iberica, S.L.) for giving us free Albuz nozzles for the spray tests. Universitat de Lleida is also thanked for Mr. X. Torrent's pre-doctoral fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of spray drift and buffer zones in 3D crops using the ISO standard and new LiDAR methodologies

  • Torrent, Xavier
  • Gregorio, Eduard
  • Rosell-Polo, Joan R.
  • Arnó, Jaume
  • Peris, Miquel
  • van de Zande, Jan C.
  • Planas, Santiago
Spray drift generated in the application of plant protection products in tree crops (3D crops) is a major source of environmental contamination, with repercussions for human health and the environment. Spray drift contamination acquires greater relevance in the EU Southern Zone due to the crops structure and the weather conditions. Hence, there is a need to evaluate spray drift when treating the most representative 3D crops in this area. For this purpose, 4 spray drift tests, measuring airborne and sedimenting spray drift in accordance with ISO 22866:2005, were carried out for 4 different crops (peach, citrus, apple and grape) in orchards of the EU Southern Zone, using an air-blast sprayer equipped with standard (STN) and spray drift reduction (DRN) nozzle types. A further 3 tests were carried out to test a new methodology for the evaluation of spray drift in real field conditions using a LiDAR system, in which the spray drift generated by different sprayer and nozzle types was contrasted. The airborne spray drift potential reduction (DPRV) values, obtained following the ISO 22866:2005, were higher than those for sedimenting spray drift potential reduction (DPRH) (63.82%–94.42% vs. 39.75%–69.28%, respectively). For each crop and nozzle type combination, a sedimenting spray drift model was also developed and used to determine buffer zone width. The highest buffer width reduction (STN vs DRN) was obtained in peach (˃75%), while in grape, citrus and apple only 50% was reached. These results can be used as the starting point to determine buffer zone width in the countries of the EU Southern Zone depending on different environmental threshold values. Tests carried out using LiDAR system demonstrated high capacity and efficiency of this system and this newly defined methodology, allowing sprayer and nozzle types in real field conditions to be differentiated and classified., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pesticide dose adjustment in fruit and grapevine orchards by DOSA3D: Fundamentals of the system and on-farm validation

  • Román, Carla
  • Peris Giner, Miquel
  • Esteve, Joan
  • Tejerina, Miguel
  • Cambray, Jordi
  • Vilardell i Coderch, Pere
  • Planas de Martí, Santiago
Agricultural productivity cannot be sustained without the application of plant protection measures. Within the framework of integrated pest management (IPM), the use of chemical pesticides should be limited to the last option among the available practices. Even though their use remains common, it carries associated environmental and human health risks. One of the most accepted practices within IPM is the reduction of spraying events and/or pesticide applied doses. DOSA3D is a decision support system that allows the dose to be adjusted to the specific treatment scenario. For this, DOSA3D calculates the optimal application volume rate by estimating the leaf area index and takes into account the overall spraying efficiency and the pest or disease to be controlled. The system adopts specific minimum volume rates for fruit trees and vineyards without compromising the crop health status. To establish the adjusted dose, the labeled or the adviser prescription concentration is kept. Resulting adjusted doses provided by DOSA3D achieved pesticide savings up to 53% in fruit trees and 60% in vineyards. DOSA3D has been validated against the main diseases and pests of fruit trees and vineyards: brown spot and psylla in pear orchards; alternaria blotch disease, apple scab, codling moth, oriental moth and red spider mite in apple orchards; powdery mildew, brown rot, aphids, thrips and mites in peach orchards; and, powdery mildew, yellow spider mite and leafhoppers in grapevine orchards. In addition, a methodology called Green Way is presented to provide consistent and crop safety pesticide doses when these are labeled as concentration or ground area doses., his study wasfinanced by the EU Horizon 2020 project EUCLID[grant number 633999], the Spanish Ministry of Economy and Compet-itiveness project AgVance [AGL2013-48297-C2-2-R] and the SpanishMinistry of Agriculture, Fisheries and Food project GOPHYTOVID [con-tract 2018002001192]. We are also grateful for funding by theSecretaria d'Universitats i Recerca del Departament d'Empresa iConeixement de la Generalitat de Catalunya under Grant 2017 SGR 646
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pesticide dose adjustment in fruit and grapevine orchards by DOSA3D: Fundamentals of the system and on-farm validation

  • Román, Carla
  • Peris, Miquel
  • Esteve, Joan
  • Tejerina, Miguel
  • Cambray, Jordi
  • Vilardell, Pere
  • Planas, Santiago
Agricultural productivity cannot be sustained without the application of plant protection measures. Within the framework of integrated pest management (IPM), the use of chemical pesticides should be limited to the last option among the available practices. Even though their use remains common, it carries associated environmental and human health risks. One of the most accepted practices within IPM is the reduction of spraying events and/or pesticide applied doses. DOSA3D is a decision support system that allows the dose to be adjusted to the specific treatment scenario. For this, DOSA3D calculates the optimal application volume rate by estimating the leaf area index and takes into account the overall spraying efficiency and the pest or disease to be controlled. The system adopts specific minimum volume rates for fruit trees and vineyards without compromising the crop health status. To establish the adjusted dose, the labeled or the adviser prescription concentration is kept. Resulting adjusted doses provided by DOSA3D achieved pesticide savings up to 53% in fruit trees and 60% in vineyards. DOSA3D has been validated against the main diseases and pests of fruit trees and vineyards: brown spot and psylla in pear orchards; alternaria blotch disease, apple scab, codling moth, oriental moth and red spider mite in apple orchards; powdery mildew, brown rot, aphids, thrips and mites in peach orchards; and, powdery mildew, yellow spider mite and leafhoppers in grapevine orchards. In addition, a methodology called Green Way is presented to provide consistent and crop safety pesticide doses when these are labeled as concentration or ground area doses., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarization lidar detection of agricultural aerosol emissions

  • Gregorio, Eduard
  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francisco
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Solanelles, Francesc
  • Rosell Polo, Joan Ramon
Agricultural aerosol emissions can significantly impact human and animal health as well as the environment. Therefore, it is essential to adopt new sensing techniques for real-time monitoring these emissions in high temporal and spatial resolution. In recent years, light detection and ranging (lidar) technology has been used for measuring the particulate matter emitted from agricultural operations. However, conventional nonpolarized lidar systems cannot discriminate between different types of aerosols, which can lead to misinterpretation of the results. To overcome this limitation, this study applies the polarization lidar technique to monitor agricultural aerosols. A 355¿nm polarization lidar system was used to measure the emissions generated during pesticide spraying operations. The results showed that depolarization ratios due to field dust (0.220–0.268) and to road dust (0.385) are clearly higher than those caused by pesticide spray drift (0.028–0.043) or by diesel exhaust (0.099), which can be used to differentiate each type of aerosol. These results support the development of new polarization lidar systems specifically designed to study the impact of agricultural activities on air quality., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Relationship between tree row LIDAR-volume and leaf area density for fruit orchards and vineyards obtained with a LIDAR 3D Dynamic Measurement System

  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Planas de Martí, Santiago
In this work, a LIDAR 3D Dynamic Measurement System, based on a Two-Dimensional Terrestrial Laser-LIDAR Scanner (2D TLS), was used for the geometric characterisation of tree-row crops (apple trees, pear trees and vineyards). The trees were scanned with the LIDAR system from opposite sides to obtain two three-dimensional point clouds. The point clouds were registered and the volume occupied by the resulting point cloud, tree row LIDAR-volume (TRLV), was graphically and numerically obtained. The study undertaken in this paper is based on the hypothesis that there may exist a non-linear relationship between the TRLV and the leaf area density (LAD). The main objective is to examine the relationship between TRLV and LAD in vineyards, apple and pear orchards. The study of 35 blocks of vegetation reveals a good logarithmic fit, y = −0.36 ln(x) + 3.69 with R2 = 0.87, between the TRLV (x) in dm3 and the LAD (y) in dm−1. It would appear that the TRLV of the crops under study (planted in a hedgerow-type configuration) is in itself an explanation of the LAD. The competition for light between the leaves and the space that these leaves occupy appear to follow a similar model in the three crops. According to the results of this study, the LAD can be estimated from the TRLV. If the LAD is multiplied by the TRLV, the leaf area of the vegetation under study can be obtained. It is therefore concluded that by using the information provided by the LIDAR 3D Dynamic Measurement System, a good estimation can be obtained of the leaf area in hedgerow fruit tree crops and hedgerow vineyards., This work has been funded by the Spanish Ministry of Science and Innovation and by the European Union through the FEDER funds and is part of research projects Pulvexact (AGL2002-04260-C04-02), Optidosa (AGL2007-66093-C04-03) and Safespray (AGL2010-22304-C04-03).