Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 2 – Vineyard prototype: design, implementation, and validation

  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Fàbregas, X.
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The structural characteristics of the canopy are a key consideration for improving the efficiency of the spray application process for tree crops. However, obtaining accurate data in an easy, practical, and efficient way is an important problem to be solved. This paper describes the technical characteristics of a sprayer prototype developed for vineyards, following the principles and previous laboratory tests described in the complementary paper Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation. This prototype can modify the sprayed volume application rate according to the target geometry by using an algorithm based on the canopy volume inspired by the tree row volume (TRV) model. Variations in canopy width along the row crop are electronically measured using several ultrasonic sensors placed on the sprayer and used to modify the emitted flow rate from the nozzles in real time; the objective during this process is to maintain the sprayed volume per unit canopy volume (L m−3). Field trials carried out at different crop stages for Merlot and Cabernet Sauvignon vines (Vitis vinifera) indicated a good relationship between the applied volume and canopy characteristics. The potential pesticide savings were estimated to be 21.9% relative to the costs of a conventional application. This conclusion is in accordance with the results of similar research on automated spraying systems., Funding for this research was provided by the Spanish Ministry of Science and Innovation and the European Regional Development Funds and is part of research projects Optidosa (AGL2007-66093-C04-02/AGR) and Safespray (AGL2010-22304-C04-04).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods

  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Llop, Jordi
  • Escolà i Agustí, Alexandre
Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed., This work was funded by the Spanish Ministry of Science and Innovation (Project AGL2007- 66093-C04-02), and the ERDF (European Regional Development Fund).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Design of a decision support method to determine volume rate for vineyard spraying

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
Dose determination in crops such as grapevine, which develops a large canopy within a relatively short period of time, becomes a key factor on the final success of plant protection product (PPP) application. Efficacy of PPP applications depends on many factors. Based on multiple data obtained over several years in real working conditions using different types of sprayers in vineyards, and by adding a complete data base about crop characteristics (structure, crop stage, leaf area, LAI, etc.), the objective of this work has been to develop an easy and useful tool, DOSAVIÑA, able to determine the optimal volume rate in spray applications in vineyards. DOSAVIÑA, based on a spreadsheet (Microsoft Excel ), allows quantifying all the parameters involved in the application process (sprayer type, crop characteristics, working conditions, weather, etc.), and to determine the efficiency of the application. By selecting and choosing the different options for each parameter (crop, pesticide, working conditions, weather conditions, sprayer, and droplet characteristics) the program calculates the theoretical volume rate (L ha‐1) based on two different methods, the Optimal Coverage Method and the Tree‐Row‐Volume method. Results obtained with DOSAVIÑA allow reducing the recommended volume rate in comparison with traditional application rate selection managed for farmers. In order to make a complete and useful tool, the program includes the possibility to calculate the final working parameters (pressure, nozzle type, and size) according to the recommendations on volume rate (L ha‐1) obtained., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research projects AGL2002‐04260‐C04‐03 and AGL2007‐66093‐ C04‐02/AGR
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate dosing in precision viticulture: Use of electronic devices to improve application efficiency

  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Llop, Jordi
  • Escolà i Agustí, Alexandre
Two different spray application methods were compared in three vine varieties at different crop stages. A conventional spray application with a constant volume rate per unit ground area (1 ha(-1)) was compared with a variable rate application method designed to compensate electronically for measured variations in canopy dimensions. An air-blast sprayer with individual multi-nozzle spouts was fitted with three Ultrasonic sensors and three electro valves on one side, in order to modify the emitted flow rate of the nozzles according to the variability of canopy dimensions in real time. The Purpose of this prototype was to precisely apply the required amount of spray liquid and avoid over dosing. On average, a 58% saving in application volume was achieved with the variable rate method, obtaining similar or even better leaf deposits., This work was funded by the Spanish Ministry of Education and Science, and was part of research project AGL2007-66093-C04-02/AGR. We are grateful to Professor Jordi Valero from Universitat Politècnica de Catalunya for his help in the statistical analysis and Xavier Vidal director of the School of Viticulture “Mercè Rosell” at Espiells (Barcelona) for his help during the field experiments.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate dosing in precision viticulture: Use of electronic devices to improve application efficiency

  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Llop, Jordi
  • Escolà i Agustí, Alexandre
Two different spray application methods were compared in three vine varieties at different crop stages. A conventional spray application with a constant volume rate per unit ground area (1 ha(-1)) was compared with a variable rate application method designed to compensate electronically for measured variations in canopy dimensions. An air-blast sprayer with individual multi-nozzle spouts was fitted with three Ultrasonic sensors and three electro valves on one side, in order to modify the emitted flow rate of the nozzles according to the variability of canopy dimensions in real time. The Purpose of this prototype was to precisely apply the required amount of spray liquid and avoid over dosing. On average, a 58% saving in application volume was achieved with the variable rate method, obtaining similar or even better leaf deposits., This work was funded by the Spanish Ministry of Education and Science, and was part of research project AGL2007-66093-C04-02/AGR. We are grateful to Professor Jordi Valero from Universitat Politècnica de Catalunya for his help in the statistical analysis and Xavier Vidal director of the School of Viticulture “Mercè Rosell” at Espiells (Barcelona) for his help during the field experiments.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 2 – Vineyard prototype: design, implementation, and validation

  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Fàbregas, X.
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The structural characteristics of the canopy are a key consideration for improving the efficiency of the spray application process for tree crops. However, obtaining accurate data in an easy, practical, and efficient way is an important problem to be solved. This paper describes the technical characteristics of a sprayer prototype developed for vineyards, following the principles and previous laboratory tests described in the complementary paper Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation. This prototype can modify the sprayed volume application rate according to the target geometry by using an algorithm based on the canopy volume inspired by the tree row volume (TRV) model. Variations in canopy width along the row crop are electronically measured using several ultrasonic sensors placed on the sprayer and used to modify the emitted flow rate from the nozzles in real time; the objective during this process is to maintain the sprayed volume per unit canopy volume (L m−3). Field trials carried out at different crop stages for Merlot and Cabernet Sauvignon vines (Vitis vinifera) indicated a good relationship between the applied volume and canopy characteristics. The potential pesticide savings were estimated to be 21.9% relative to the costs of a conventional application. This conclusion is in accordance with the results of similar research on automated spraying systems., Funding for this research was provided by the Spanish Ministry of Science and Innovation and the European Regional Development Funds and is part of research projects Optidosa (AGL2007-66093-C04-02/AGR) and Safespray (AGL2010-22304-C04-04).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design of a decision support method to determine volume rate for vineyard spraying

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
Dose determination in crops such as grapevine, which develops a large canopy within a relatively short period of time, becomes a key factor on the final success of plant protection product (PPP) application. Efficacy of PPP applications depends on many factors. Based on multiple data obtained over several years in real working conditions using different types of sprayers in vineyards, and by adding a complete data base about crop characteristics (structure, crop stage, leaf area, LAI, etc.), the objective of this work has been to develop an easy and useful tool, DOSAVIÑA, able to determine the optimal volume rate in spray applications in vineyards. DOSAVIÑA, based on a spreadsheet (Microsoft Excel ), allows quantifying all the parameters involved in the application process (sprayer type, crop characteristics, working conditions, weather, etc.), and to determine the efficiency of the application. By selecting and choosing the different options for each parameter (crop, pesticide, working conditions, weather conditions, sprayer, and droplet characteristics) the program calculates the theoretical volume rate (L ha‐1) based on two different methods, the Optimal Coverage Method and the Tree‐Row‐Volume method. Results obtained with DOSAVIÑA allow reducing the recommended volume rate in comparison with traditional application rate selection managed for farmers. In order to make a complete and useful tool, the program includes the possibility to calculate the final working parameters (pressure, nozzle type, and size) according to the recommendations on volume rate (L ha‐1) obtained., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research projects AGL2002‐04260‐C04‐03 and AGL2007‐66093‐ C04‐02/AGR
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods

  • Llorens Calveras, Jordi
  • Gil Moya, Emilio
  • Llop, Jordi
  • Escolà i Agustí, Alexandre
Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed., This work was funded by the Spanish Ministry of Science and Innovation (Project AGL2007- 66093-C04-02), and the ERDF (European Regional Development Fund).