Pasar al contenido principal

ESTRATEGIAS INTEGRALES PARA UNA UTILIZACION DE FITOSANITARIOS SEGURA Y EFICAZ. PULVERIZACION INTELIGENTE EN VIÑA

AGL2010-22304-C04-04

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 2 – Vineyard prototype: design, implementation, and validation

  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Fàbregas, X.
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The structural characteristics of the canopy are a key consideration for improving the efficiency of the spray application process for tree crops. However, obtaining accurate data in an easy, practical, and efficient way is an important problem to be solved. This paper describes the technical characteristics of a sprayer prototype developed for vineyards, following the principles and previous laboratory tests described in the complementary paper Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation. This prototype can modify the sprayed volume application rate according to the target geometry by using an algorithm based on the canopy volume inspired by the tree row volume (TRV) model. Variations in canopy width along the row crop are electronically measured using several ultrasonic sensors placed on the sprayer and used to modify the emitted flow rate from the nozzles in real time; the objective during this process is to maintain the sprayed volume per unit canopy volume (L m−3). Field trials carried out at different crop stages for Merlot and Cabernet Sauvignon vines (Vitis vinifera) indicated a good relationship between the applied volume and canopy characteristics. The potential pesticide savings were estimated to be 21.9% relative to the costs of a conventional application. This conclusion is in accordance with the results of similar research on automated spraying systems., Funding for this research was provided by the Spanish Ministry of Science and Innovation and the European Regional Development Funds and is part of research projects Optidosa (AGL2007-66093-C04-02/AGR) and Safespray (AGL2010-22304-C04-04).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate sprayer. Part 2 – Vineyard prototype: design, implementation, and validation

  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Fàbregas, X.
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The structural characteristics of the canopy are a key consideration for improving the efficiency of the spray application process for tree crops. However, obtaining accurate data in an easy, practical, and efficient way is an important problem to be solved. This paper describes the technical characteristics of a sprayer prototype developed for vineyards, following the principles and previous laboratory tests described in the complementary paper Variable rate sprayer. Part 1 – Orchard prototype: design, implementation and validation. This prototype can modify the sprayed volume application rate according to the target geometry by using an algorithm based on the canopy volume inspired by the tree row volume (TRV) model. Variations in canopy width along the row crop are electronically measured using several ultrasonic sensors placed on the sprayer and used to modify the emitted flow rate from the nozzles in real time; the objective during this process is to maintain the sprayed volume per unit canopy volume (L m−3). Field trials carried out at different crop stages for Merlot and Cabernet Sauvignon vines (Vitis vinifera) indicated a good relationship between the applied volume and canopy characteristics. The potential pesticide savings were estimated to be 21.9% relative to the costs of a conventional application. This conclusion is in accordance with the results of similar research on automated spraying systems., Funding for this research was provided by the Spanish Ministry of Science and Innovation and the European Regional Development Funds and is part of research projects Optidosa (AGL2007-66093-C04-02/AGR) and Safespray (AGL2010-22304-C04-04).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview

  • Rosell Polo, Joan Ramon
  • Arnó Satorra, Jaume
  • Escolà i Agustí, Alexandre
  • Gil Moya, Emilio
  • Llorens Calveras, Jordi
  • Llop, Jordi
  • Gallart, Montserrat
Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy, This work was funded by the Spanish Ministry of Science and Innovation (SAFESPRAY project AGL2010-22304-C04-03 and AGL2010-22304-C04-04, and OPTIDOSA project AGL2007-66093-C04-02 and AGL2007-66093-C04-03), and the ERDF (European Regional Development Fund).