Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and validation of a 2D CFD model of the airflow produced by an airblast sprayer during pesticide treatments of citrus

  • Salcedo Cidoncha, Ramón
  • Granell Ruiz, Rafael
  • Vallet, A.
  • Garcerá, C.
  • Chueca, Patricia
  • Moltó, E.
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
[EN] During plant protection treatments using airblast sprayers, part of the chemical is lost in the atmosphere (spray drift), ground, surface water, etc., causing risks to the environment. Although there is a growing interest in quantifying these losses, field measurements are extraordinarily complex and expensive. Computational Fluid Dynamics (CFD) generates mathematical models of this phenomenon that may help to understand and quantify it. The air flow produced by the fan is affected by the tree canopies, which modify the trajectories of spray droplets. Current state of the art in CFD considers canopies as porous bodies and uses the k-epsilon turbulence model. In a first step, this work proposes and validates a two dimensional CFD model to be applied in citrus tree applications from experimental data. This new CFD model considers canopies as solid bodies. Four different geometries for the first tree are compared using three different turbulence models: k-epsilon, SST k-omega and Reynolds Stress Model. Air velocities measured in front of a canopy in a previous field test are introduced as boundary conditions. We used the experimental data to adjust the model and select the geometry and the turbulence model. In order to test the validity of the model, air velocities obtained with the model are compared with the experimental data obtained in other experiment. The final CFD model was able to reproduce the airflow behaviour around the tree canopy, with the same turbulent structures. The solid body with the new turbulence model (SST k-omega) was considered as a good approximation to the real life. (C) 2015 Elsevier B.V. All rights reserved., This work was partially financed by the Spanish Ministry of Economy (Projects AGL2007-66093-C04-01 and AGL2010-22304-C04-01) and the European Regional Development Fund (ERDF). Ramon Salcedo is recipient of a postgraduate FPI-INIA scholarship. Authors would like to thank to Grupo Martinavarro S.L. for allowing the use of their fields and Pulverizadores Fede S.A. for the use of its sprayer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling the spray deposition and efficacy of two mineral oil-based products for the control of California red scale, Aonidiella aurantii (Maskell)

  • Garcerá Figueroa, María de la Cruz
  • Moltó García, Enrique
  • Chueca, Patricia
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
The pattern and quantity of pesticide deposition may affect the efficacy of pesticide treatments. In this study we evaluated under laboratory conditions the efficacy of two petroleum-derived spray oils (PDSO) (Laincoil ®, an nC21 oil with a content of 83% w/v, Oil A, and Sunspray Ultrafine ®, an nC21 with a content of 85% w/v, Oil B, both with an unsulfonated residue of 92%) applied at 1.5% concentration at five volumes (0.5, 1, 2, 3 and 4 ml) against different stages of Aonidiella aurantii Maskell (Homoptera: Diaspididae). In parallel, we characterized the deposition pattern of treatments resulting from these five volumes and two PDSOs. The objective was to model deposition characteristics and efficacy as a function of the deposited volume in order to determine the optimum volume per unit surface that should be applied to control this pest. Different models that depend on the developmental stage and relate to the efficacy of the treatment as a function of the deposited volume have been obtained for both PDSOs, thus providing a scientific basis for product efficacy comparison. Furthermore, our results are also relevant to find an adequate trade-off between sprayed pesticide volume and expected efficacy. © 2011 Elsevier Ltd., This research was partially funded by the Ministerio de Ciencia e Innovacion de Espana (project AGL2007-66093-C04) and Fondo Europeo de Desarrollo Regional (FEDER). C. Garcera was recipient of a grant from IVIA.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LIDAR as an alternative to passive collectors to measure pesticide spray drift

  • Gregorio López, Eduard
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rocadenbosch Burillo, Francesc
  • Solanelles Batlle, Francesc
  • Garcerá, Cruz
  • Chueca, Patricia
  • Arnó Satorra, Jaume
  • Moral Martínez, Ignacio del
  • Masip Vilalta, Joan
  • Camp, Ferran
  • Viana, R.G.
  • Escolà i Agustí, Alexandre
  • Gràcia, Felip
  • Planas de Martí, Santiago
  • Moltó García, Enrique
Pesticide spray drift entails a series of risks and costs in terms of human, animal and environmental well-being. A proper understanding of this phenomenon is essential to minimise these risks. However, most conventional methods used in drift measurement are based on point collectors which are unable to obtain information concerning the temporal or spatial evolution of the pesticide cloud. Such methods are also costly, labour-intensive, and require a considerable amount of time. The aim of this paper is to propose a method to measure the spray drift based on lidar (LIght Detection And Ranging) and to prove that it can be an alternative to passive collectors. An analytical model is proposed to relate the measurements obtained through passive collectors and those obtained with lidar systems considering several spray application and meteorological parameters. The model was tested through an experimental campaign involving multiple ground spray tests. A lidar system and two types of passive collectors (nylon strings and water-sensitive paper) were used simultaneously to measure the drift. The results showed for each test a high coefficient of determination (R2 ≈ 0.90) between the lidar signal and the tracer mass captured by the nylon strings. This coefficient decreased (R2 = 0.77) when all tests were considered together. Lidar measurements were also used to study the evolution of the pesticide cloud with high range (1.5 m) and temporal resolution (1 s) and to estimate its velocity. Furthermore, a very satisfactory adjustment (R2 = 0.89) was observed between the tracer mass collected by the nylon lines and the coverage on water-sensitive paper sheets. These results are in accordance with the proposed analytical model and allow the conclusion that the application and meteorological parameters can be considered spatially invariant for a given test but are not invariant for different tests., This research was partially funded by the Spanish Ministry of Science and Innovation (projects AGL2007-66093-C04 and AGL2010-22304-C04) and EU FEDER.