Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Circuit reliability prediction: Challenges and solutions for the device time-dependent variability characterization roadblock

  • Nafria, M.
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Martín-Martínez, Javier
  • Roca, Elisenda
  • Castro-López, Rafael
  • Rodríguez, Rosana
  • Martín-Lloret, P.
  • Toro-Frias, A.
  • Mateo, D.
  • Barajas, Enrique
  • Aragones, X.
  • Fernández, Francisco V.
Copyright IEEE, The characterization of the MOSFET Time-Dependent Variability (TDV) can be a showstopper for reliability-Aware circuit design in advanced CMOS nodes. In this work, a complete MOSFET characterization flow is presented, in the context of a physics-based TDV compact model, that addresses the main TDV characterization challenges for accurate circuit reliability prediction at design time. The pillars of this approach are described and illustrated through examples., This work was supported by the VIGILANT Project (PID2019-103869RB / AEI / 10.13039/501100011033) and the TEC2016-75151-C3-R Project (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

An IC Array for the Statistical Characterization of Time-Dependent Variability of Basic Circuit Blocks

  • Martin-Lloret, P.
  • Núñez, Juan
  • Roca, Elisenda
  • Castro-López, Rafael
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents an integrated circuit (IC) array whose purpose is to observe, quantify and characterize the impact of time-dependent variability effects, like aging, in several widely used digital and analog circuit blocks. With the increasing interest that this kind of mechanism has attracted in the last years, for its potential impact in the reliability of ultra-scaled integrated circuits, it is only relevant that appropriate measures are taken to find out how it can be included (and thus mitigated) in the design process of such integrated circuits. And, while substantial literature exists that covers the device level, time-dependent variability at circuit level has not been as equally studied. This work complements our previous efforts in providing a holistic approach to Reliability-Aware Design: from statistical characterization and modeling at device-level, to simulation, and into optimization-based design with reliability considerations, the array presented here provides one more step towards a thorough and accurate understanding of how time-dependent variability works at the circuit level., This work was supported in part by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

TiDeVa: A Toolbox for the Automated and Robust Analysis of Time-Dependent Variability at Transistor Level

  • Saraza-Canflanca, P.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Time-Dependent Variability has attracted increasing interest in the last years. In particular, time-dependent phenomena such as Bias Temperature Instability, Hot Carrier Injection and Random Telegraph Noise can have a large impact on circuit reliability, and must be therefore characterized and modeled. For technologies in the nanometer range, these phenomena reveal a stochastic behavior and must be characterized in a massive manner, with enormous amounts of data being generated in each measurement. In this work, a novel tool with a user-friendly interface, which allows the robust and fully-automated parameter extraction for RTN, BTI and HCI experiments, is presented., This work has been supported in part by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF) and by the P12-TIC-1481 Project (funded by Junta de Andalucía)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental Characterization of Time-Dependent Variability in Ring Oscillators

  • Núñez, Juan
  • Roca, Elisenda
  • Castro-López, Rafael
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Reliability in CMOS-based integrated circuits has always been a critical concern. In today's ultra-scaled technologies, a time-varying kind of variability has raised that, on top of the well-known time-zero variability, threatens to shorten the lifetime of integrated circuits, both analog and digital. Effects like Bias Temperature Instability and Hot Carriers Injection need to be studied, characterized and modeled to include, and, thus, mitigate, their impact in the design of CMOS integrated circuits. This paper presents an array-based integrated circuit whose purpose is precisely that: to observe, quantify and characterize the impact of time-dependent variability effects in a specific kind of circuits: Ring Oscillators., This work has been funded by Ministerio de Economía y Competitividad del Gobierno de España with support from ERDF (Projects TEC2016-75151-C3-R, TEC2017-87052-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A New Time Efficient Methodology for the Massive Characterization of RTN in CMOS Devices

  • Pedreira, G.
  • Martín-Martínez, Javier
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Rodríguez, Rosana
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
  • Nafria, M.
Talk delivered at the IEEE International Reliability Physics Symposium (IRPS) in Monterrey, California (USA), March 31– April 4, 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work a new method to characterize Random Telegraph Noise (RTN) in a large number of devices is presented. The method is applied to the RTN characterization of nearly 800 pMOS transistors and compared with conventional approaches. The results presented here show that the new method, which requires the measurement of each device only in two instants, can hugely reduce the measurement time needed for the statistical characterization of RTN., This work was supported by Spanish AEI and ERDF under Project TEC2016-75151-C3-R. The work of G. Pedreira, J. Diaz-Fortuny and P. Saraza-Canflanca was supported by AEI under grants BES-2017-081462, BES-2014-067855 and BES- 2017-080160 respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Generation of Lifetime-Aware Pareto-Optimal Fronts Using a Stochastic Reliability Simulator

  • Toro-Frias, A.
  • Saraza-Canflanca, P.
  • Passos, Fábio
  • Martin-Lloret, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE) in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Process variability and time-dependent variability have become major concerns in deeply-scaled technologies. Two of the most important time-dependent variability phenomena are Bias Temperature Instability (BTI) and Hot-Carrier Injection (HCI), which can critically shorten the lifetime of circuits. Both BTI and HCI reveal a discrete and stochastic behavior in the nanometer scale, and, while process variability has been extensively treated, there is a lack of design methodologies that address the joint impact of these two phenomena on circuits. In this work, an automated and time-efficient design methodology that takes into account both process and time-dependent variability is presented. This methodology is based on the utilization of lifetime-aware Pareto-Optimal Fronts (POFs). The POFs are generated with a multi-objective optimization algorithm linked to a stochastic simulator. Both the optimization algorithm and the simulator have been specifically tailored to reduce the computational cost of the accurate evaluation of the impact on a circuit of both sources of variability., This work has been supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New method for the automated massive characterization of Bias Temperature Instability in CMOS transistors

  • Saraza-Canflanca, P.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Bias Temperature Instability has become a critical issue for circuit reliability. This phenomenon has been found to have a stochastic and discrete nature in nanometer-scale CMOS technologies. To account for this random nature, massive experimental characterization is necessary so that the extracted model parameters are accurate enough. However, there is a lack of automated analysis tools for the extraction of the BTI parameters from the extensive amount of generated data in those massive characterization tests. In this paper, a novel algorithm that allows the precise and fully automated parameter extraction from experimental BTI recovery current traces is presented. This algorithm is based on the Maximum Likelihood Estimation principles, and is able to extract, in a robust and exact manner, the threshold voltage shifts and emission times associated to oxide trap emissions during BTI recovery, required to properly model the phenomenon., This work has been supported by the TEC2016-75151-C3-R Projects (funded by the Spanish MINECO and ERDF). Javier Díaz Fortuny acknowledges MINECO for supporting his research activity through the FPI grant BES-2014-067855. Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving the reliability of SRAM-based PUFs in the presence of aging

  • Saraza-Canflanca, P.
  • Carrasco-Lopez, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Talk delivered at the 2020 conference 15th Design & Technology of Integrated Systems in Nanoscale Era (DTIS), Marrakesh (Morocco), April 1-3, 2020. © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The utilization of power-up values in SRAM cells for the generation of PUF responses has been widely studied. It is important that the cells used for this purpose are stable, i.e., the cells must have a strong tendency towards one of the two possible values ('0' or '1'). Some methods have been presented that aim at increasing the reliability of this type of PUFs by selecting the strongest cells among a set of them. However, they feature some drawbacks, either in terms of their practical feasibility or of their actual effectiveness selecting the strongest cells in different scenarios. In this work, the experimental results obtained for a new method to classify the cells according to their strength are presented and discussed. The technique overcomes some of the drawbacks that the previous methods present. In particular, it is experimentally demonstrated that the technique presented in this work outstands in selecting SRAM cells that are very robust against circuit degradation, which translates into the construction of reliable SRAM-based PUFs., This work was supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed