Pasar al contenido principal

NUEVAS ANTENAS PARA COMUNICACIONES MOVILES POR SATELITE EN BANDA KA

TEC2016-79700-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Circularly-Polarized T-shaped Slot Array Antenna in Ka-band

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Sánchez-Escuderos, Daniel
[EN] A T-shaped slot-array antenna fed through a Groove Gap Waveguide (GGW) is presented in this paper. The array antenna operates at 30 GHz. The way the slots are excited, along with the T-shape on its lid allows a compact single-layer architecture. A uniform linear array of 12 elements is designed to demonstrate the viability of this concept for high-efficient singlelayer slot-array antennas. Preliminary results show a frequency bandwidth of 1 GHz with input reflection coefficient better than ¿12 dB. In addition, being a full-metal antenna, the expected efficiency is high. It is worth stressing the good polarization purity achieved, being below 1.5 dB within the band of interest., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mechanical phase shifter in gap-waveguide technology

  • Sánchez-Escuderos, Daniel
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This contribution presents a low-loss mechanical phase shifter in gap-waveguide technology. The phase shifter is aimed at ground terminals for Ka-band satellite on-the-move applications. The use of the gap-waveguide technology allows to divide the device into two main blocks distributed in two levels: a lower-rotatable block, in charge of the power distribution and the phase shifting; and an upper-fixed block with the output waveguides. In this paper, the lower and upper blocks are designed using Groove-gap waveguides (GGW), and Ridge-gap waveguides, respectively, connected to each other by coupling slots. Results show a good performance within the operating frequency band in terms of the phase shift between consecutive output ports (suitable for array feeding), and the return loss level at the input port., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700- C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dual Circularly-Polarized Slot-Array Antenna in Ka-Band fed by Groove Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Sánchez-Escuderos, Daniel
[EN] A dual circularly-polarized slot-array antenna fed by a Groove Gap Waveguide (GGW) and operating in the KaBand is presented in this paper. A simple mechanism is proposed to switch the polarization, from RHCP to LHCP, and viceversa. The lid of the antenna has two pieces: one fixed and one sliding. The fixed piece hosts T-shaped slots, and the sliding block is in charge of adjusting the offset of the perpendicular grooves with respect to the longitudinal slots. Preliminary results show an axial ratio below 1.5 dB for both, RHCP and LHCP, within a bandwidth of 1 GHz centered at 30 GHz., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Guía de onda ranurada con polarización circular conmutable en banda Ka y usando tecnología Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[ES] Se presenta una guia de onda ranurada con polarizacion dual circular y alimentada por una guia de onda Groove Gap (GGW) y que funciona en la banda Ka. Se propone un mecanismo simple para cambiar la polarizacion circular a ¿ derechas por circular a izquierdas, y viceversa. La tapa de la antena tiene dos piezas: una fija y otra deslizante. La pieza fija alberga ranuras en forma de T, y el bloque deslizante se encarga de ajustar el desplazamiento de las ranuras perpendiculares con respecto a las ranuras longitudinales. Los resultados preliminares muestran una relacion axial por debajo de 1.5 dB para ambos ¿ sentidos de polarizacion circular, dentro de un ancho de banda ¿ de 1 GHz centrado en 30 GHz., Este trabajo ha sido apoyado por el Ministerio de Ciencia, Innovación y Universidades en el marco del proyecto TEC2016-79700-C2-1-R.