Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Deliverable D7.4 Report on parasite antigen elimination or inactivation methods in fishery products

  • Olivares, Fabiola
  • Tejada Yábar, Margarita
  • González Muñoz, Miguel
  • Navas, Alfonso
  • Careche, Mercedes
  • Pascual, Santiago
PARASITE: Parasite Risk Assessment with Integrated Tools in EU Fish Production Value Chains Collaborative Project Targeted to a Special Group (Such as SMEs) GA 312068 (01/02/2013-1/01/2016)., The objective of this task was to design strategies to reduce the allergens that in processed products produced from fish infected with Anisakis L3. Two different processes were selected: a) the surimi and production of kamaboko type gels, and b) conditions used in the canning processing. In surimi, the effects of factors such as removal of antigens by washing, the addition of cryoprotectants, salting, heating, and frozen storage were analysed. In the canning processing different heating regimes used in the canning industry were studied. The washing operation of fish muscle is one of the key steps in the production of surimi. The aim of this first part of the study was to assess in parasitized minced fish the effect of the washing steps on the allergen removal of Anisakis simplex and on protein yield during surimi processing. Experimentally infected hake (Merluccius merluccius) (50 Anisakis simplex s.s L3 larvae per 100 g of muscle) underwent three successive washing steps with water, phosphate buffer (20 mM), sodium bicarbonate (60 mM), or sodium hypochlorite (0.27 mM) (4 kg muscle, 1:4 w/v for each solution) that rendered an intermediate product named “raw surimi”. Total protein concentration and A. simplex antigens and allergens were evaluated in each waste fraction. The highest removal of Ani s 4 and A. simplex antigens was achieved by using phosphate buffer, together with a good protein yield in the raw surimi. Decrease of the concentration of allergens and antigens as a function of the washing steps rendered a linear trend (R2=0.95 and 0.98 for Ani s 4 and A. simplex antigens respectively). Results suggested that the conditions for an optimal removal of Anisakis allergens can be established and calculated as a function of the washing steps. Despite the fact that washing of muscle in surimi processing significantly reduced the allergen concentration, raw surimi still have residual antigens and allergens that are carried on in the subsequent steps. In order to know if additional factors related to surimi production could have an effect, the second objective of this work was to determine if the cryoprotectant blends added in the subsequent steps modified the antigens and allergen recognition. Surimi is usually commercialized frozen stored and therefore the effect of frozen storage was also assessed. Two cryoprotectant blends were added to each of the four raw surimi described in the previous paragraph: 4% sucrose+4% sorbitol and 4% sucrose+4% sorbitol+0.2% sodium pyrophosphate, thus making a total of eight combinations (four raw surimi x two cryoprotectant blends). Antigen and allergen recognition was analyzed in surimi that had been chilled (5°C), or frozen stored (-20°C) for 90 or 180 days. Ani s 4 and Anisakis simplex antigens were quantified by immunodetection (Dot blot). No significant differences (p<0.05) were found between different surimi blends and the major changes were observed along frozen storage since the detection of Ani s 4 was gradually reduced. To obtain the gels, surimi is ground with salt and the viscous sol formed turns to an elastic gel upon heating, producing changes in the structure of myofibrillar proteins which form a network where water and other components are entrapped and in these conditions the allergenicity could be potentially affected. Thus, we next investigated the effect of solubilization in salt and heat treatment used on the gel forming process on the antigen and allergen recognition. The effects of frozen storage in the surimi and in the gels were also evaluated. Each of the eight different surimis was ground with 2.5% of NaCl (3 min, 5°C), stuffed into stainless steel cylinders (30x30 mm), heated (90°C, 30 min), cooled in iced water and kept at room temperature (24-25°C) before measurement. Gels were made from a) chilled surimi, b) frozen surimi (-20°C) after 90 or c) 180 days. Also, gels from chilled surimi were frozen stored for 90 and 180 days. Ani s 4 and A. simplex antigens were quantified by dot blot and immunohistochemistry. Results showed that the heat treatment decreased the detection of Ani s 4 but still some allergenicity could be observed by immunohistochemistry. This decrease was higher with surimi gels made from frozen surimi than with gels made from chilled surimi and frozen stored under the same conditions of time and temperature. The purpose of canning is to kill or inactivate all microbial contaminants, irrespective of their source, by heating and packaging the product in hermetically sealed containers so that it will be protected from recontamination. The aim was to study the effect of different heat treatments used in the fish canning processing industry on the antigen recognition of Anisakis L3. Bigeye tuna (Thunnus obesus) and Yellowfin tuna (Thunnus albacares) were experimentally infected with live L3 Anisakis. After 48 h at 5±1ºC, brine was added to the muscle and then canned raw (live larvae) or heated (90ºC, 30 min) (dead larvae) and treated at 113°C, 60 min or 115°C, 90 min. Anisakis antigens and Ani s 4 were detected with anti-crude extract and anti-Ani s 4 antisera, respectively. Ani s 4 decreased in all lots, but the muscle retained part of the allergenicity irrespective of the canning method as observed by immunohistochemistry. Dot blot analysis showed a high loss of Ani s 4 recognition after canning and therefore heat treatment for sterilization under the conditions studied produces a decrease in Ani s 4. It can be concluded that washing of muscle can substantially reduce the allergenic capacity of heavily infected fish in a way that can be calculated as a function of the washing steps, so that the conditions for an optimal removal can be designed case by case. On the other hand, the heat treatment used in the manufacture of gels made with surimi reduced the Ani s 4 recognition, and in terms of decrease of allergenicity it was more efficient to use frozen surimi than to freeze the gels. In the whole process, between 97-98% of the Ani s 4 allergens initially detected in the minced fish were eliminated. As regards the heat treatment for sterilization under industrial conditions, a decrease in the antigenicity of Ani s 4 was also observed. The decrease in the allergenicity after the above conditions opens a possibility of using muscle heavily infected with Anisakis larvae. However, the residual amount of allergens could represent a health risk for those patients previously sensitized to thermally stable A. simplex allergens, and the clinical relevance needs to be established., This Project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement nº 312068., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Deliverable D7.3 Report on treatments for killing parasites in fishery products

  • Careche, Mercedes
  • Sánchez Alonso, Isabel
  • González Muñoz, Miguel
  • Navas, Alfonso
  • Tejada Yábar, Margarita
  • Pascual, Santiago
PARASITE: Parasite Risk Assessment with Integrated Tools in EU Fish Production Value Chains Collaborative Project Targeted to a Special Group (Such as SMEs) GA 312068 (01/02/2013-1/01/2016)., One of the critical points in the prevention of the risk of Anisakis infection is the application of technological treatments to ensure the mortality of any larva present in the fish. Freezing fish muscle and their subsequent frozen storage is at present the most adequate technology treatment to control the risk of infection of consuming raw or undercooked infected fish. Anisakis L3 is also moderately tolerant to heat stress. In order to mitigate the risk of the intake of live larvae in seafood products it is important to define with precision at which point the parasites are no longer infective after a thermal treatment in order meet both sensory quality and safety of the products. Non-thermal processes (such as high hydrostatic pressure, ultrasound, irradiation, high intensity pulsed electric fields, oscillating magnetic fields and light pulses) can be used for the inactivation of food spoilage microorganisms without affecting the quality of the food but there is insufficient information to show that alternative non-thermal treatments are effective at killing Anisakis larvae under conditions that preserve the products’ organoleptic qualities. The general objective addressed in this deliverable was to design optimal treatments for the inactivation of anisakids in fishery products. For that, different factors affecting the thermal treatments (freezing and heating) to inactivate Anisakis simplex L3 in terms of viability, in vitro infectivity and allergenicity were addressed in isolated larvae and infected fish muscle. The study of the effectiveness of non-thermal treatments was addressed in terms of viability and agar penetration capacities. Some treatments (e.g. freezing) were selected as the most applicable and the quality of fish muscle under different conditions known to inactivate Anisakis was studied by sensory analysis and physical chemical methods (e.g. water holding capacity), spectroscopy (Low Field NMR relaxometry) and microscopy (optical, TEM). This information was used to find tools to verify that fishery products have been subjected to a given treatment, which could aid in the verification that EC regulation is being implemented. A relation was observed between freezing rates, final freezing temperatures and viability of the larvae both in isolated larvae and infected fish muscle. At 40-50% survival rates, very low fractions (3-10%) of the frozen and thawed larvae which were mobile could penetrate an agar gel and 100% died within 18 h under acid conditions simulating those of the gastric fluid. The oxygen consumption of the surviving larvae was not very different from the intact ones. The frozen and thawed larvae released antigens and allergens to the medium and it is suggested that to some extent this could be attributed to loss of the larvae integrity. There can be differences in local temperatures within a freezing process, so that some larvae may be accidentally viable, for example, in home freezers. This fact, and the lower infectivity of moribund larvae, do seem to counteract. However, the release of allergens suggest that the pathogenic potential of these moribund larvae cannot be discarded. A. pegreffii may be more labile to technological treatments and therefore present less infective potential. However, both A. pegreffii and A. simplex s.s. seem to have similar antigen and allergens suggesting a similar allergenic potential. Since high freezing rates are preferred to maintain best eating quality of fish, the results from isolated larvae and minced fish experimentally infected with Anisakis could be used to design technological conditions to meet both safety in terms of larvae mortality and fish quality. On the other hand, when the focus is on providing recommendations for the general public, it is very important to take into account the differences in temperatures within a freezer and be more conservative with the times and temperatures to be used in households. Also modeling total freezing times, which has been performed as an example, would aid to extend the present results to a broader scenarios (e.g. fat vs lean fish or fillets vs whole, different loads). This will be useful for more precise recommendations to consumers and industry so that we move in a range of freezing times sufficient to kill Anisakis and good quality products. A significant percentage of the variability in survival of Anisakis after heating treatments can arise from local differences in temperatures attained by the pieces of fish within a given culinary treatment. Oven cooking has proven to be safe at oven temperatures of 200 ºC for 20 minutes, although larvae subject to heating for only 10 min in fish are considered to have no infective potential. The low oxygen consumption rate of larvae surviving heating at 50 ºC, as compared to the controls suggests an impaired metabolism. As for freezing, more precise time and temperature recommendations should be given to the consumers to account for the high variability of heating regimes, presentations, etc and the fact that consumers tend to cook the fish for lower temperatures or shorter times. The assayed ultrasound and active packaging technologies have no effect on the inactivation of Anisakis larvae. High Pressure Processing had an inactivating effect on Anisakis, but their impact in organoleptic characteristics of fish flesh must be also taken into account. After treatments, the viable/active Anisakis larvae maintained agar penetration capacities, except for those surviving HPP. Control measures based on thermal processing (cooking and freezing) are thus at present, the most effective and a best-value for money approach. The freezing rate and storage time affected the sensory quality of the fish samples so that it is suggested that freezing rates of 70 min or less at a maximum temperature of -20 °C and thawing after 24 h could meet both safety in terms of Anisakis mortality and eating quality. These results do not exclude the fact that we could find faster freezing rates that would render equal or better results at shorter storage times in the freezer. Significant changes in muscle characteristics between unfrozen vs frozen and thawed fish, and also among samples subjected to different freezing rates have been observed. Among them, LF NMR relaxometry can be used as a tool to successfully verify if a sample has been frozen and, to some extent, if it has been subjected to fast or slow freezing rates and they open a possibility for authentication, which could aid in the verification of implementation of the EC regulation., This Project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement nº 312068., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

High hydrostatic pressure reduces the in vitro infectivity of Anisakis L3 in infected hake (Merluccius merluccius) muscle

  • Sánchez Alonso, Isabel
  • Arcos, Susana C.
  • Navas, Alfonso
  • Careche, Mercedes
Trabajo presentado al 52nd Annual WEFTA Meeting: 14-18 Oct 2024, Çeşme-İzmir, Türkiye., This work has been financed by the Project FP7-312068 EU PARASITE and “Development of tools to optimize the quality and safety of fishery products. Application to the risk of exposure to Anisakis” (ANITOOLS), Reference: CSIC 202370E041., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strategies to deal with Anisakis: A Look from a Fish Technologist

  • Careche, Mercedes
Opening Key Note 50th West European Fish Technologists’ Association (WEFTA) Conference - Rotterdam, the Netherlands, 17-21 October 2022., Anisakis spp. are nematode parasites that pose a quality and safety problem when they are present in seafood products. Besides being an aesthetic issue, humans may become accidental hosts by eating raw or undercooked fish containing viable Anisakis spp. third-stage larvae, causing infection (i.e. anisakiasis), and allergic responses, the main being gastro-allergic anisakiasis. These allergic reactions can also be elicited by fishery products contaminated with allergens, with no need for live parasites. One of the strategies to reduce the risk posed by Anisakis includes avoiding their presence in the marketed fish, for example, by selecting the zone of capture, improving the screening programs or implementing new methodology for detection of larvae or parasite material. But parasites are unfortunately present in our fish and assuring their inactivation is critical for controlling anisakiasis which in turn is crucial to hinder sensitization to Anisakis, considered to require viable larvae to trigger allergic reactions. Technology and culinary treatments are key for this, with freezing and cooking being the most relevant. The mortality of Anisakis, fate of their allergens and the quality of the fish products will be affected by the intensity of treatments. Conversely, the Anisakis species, physiology or metabolic status, may have an impact on the effectiveness of a given treatment. Due to the variety of technological situations and fish products, such as fish with different composition or geometries, we need to work towards models of Anisakis mortality that can be coupled with heat transfer simulation tools, so that we are able to expand the results obtained in a given condition to wider scenarios for a more precise risk management. These issues will be addressed in the present talk., ANIDET (AGL2009-12485-C03-01/02/03) - EU PARASITE (GA 312068) - ANIRISK (AGL2015-68248-C1-C2-MINECO-FEDER) - HEATSAKIS (PID2020-119201RB-I00/AEI/10.13039/501100011033)., Peer reviewed