Pasar al contenido principal

LASERES DE ALTO RENDIMIENTO BASADOS EN PELICULAS DELGADAS DE MATERIALES ORGANICOS E HIBRIDOS.

MAT2015-66586-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Latest Advances on Solution-processed Thin Film Organic Lasers

  • Díaz-García, María A.
  • Muñoz-Mármol, Rafael
  • Bonal, Víctor
  • Morales-Vidal, Marta
  • Villalvilla, José M.
  • Calzado Estepa, Eva María
  • Vázquez Ferri, Carmen
  • Boj, Pedro G.
  • Quintana, José A.
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Vázquez Ferri, Carmen|||/items/1b10e39e-1942-422e-8fbf-e6eb4514513b
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Latest advances from our research group towards improving the performance of solution-processed distributed feedback lasers will be discussed. They include advances on the laser material and the resonator and their application as optical sensors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Violet-emitting distributed-feedback laser using a naphtho[2,1-b:6,5-b′]difuran derivative

  • Tsuji, Hayato
  • Shitomi, Akihiro
  • Hamaguchi, Naoto
  • Egawa, Yasunobu
  • Bonal, Víctor
  • Boj, Pedro G.
  • Villalvilla, José M.
  • Quintana, José A.
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
A naphtho[2,1-b:6,5-b′]difuran derivative was found to serve as an effective violet-emitting laser dye. It showed amplified spontaneous emission at 413 nm with the threshold of 1.1–2.9 mJ cm−2 using 0.1–0.5 wt% in polystyrene film. Lasing was also demonstrated using all-polymeric distributed-feedback lasers emitting at 411–417 nm with the threshold of 2.0–2.9 mJ cm−2.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Kinetically Protected Carbon-Bridged Oligo(p-phenylenevinylene) Derivatives for Blue Color Amplified Spontaneous Emission

  • Bonal, Víctor
  • Morales-Vidal, Marta
  • Boj, Pedro G.
  • Villalvilla, José M.
  • Quintana, José A.
  • Lin, Naiti
  • Watanabe, Shoya
  • Tsuji, Hayato
  • Nakamura, Eiichi
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Carbon-bridged oligo(p-phenylenevinylene)s (COPVn with repeating unit n = 1–6) have demonstrated great success as laser dyes for thin-film organic lasers. The excellent photostability observed in the longer homologues is, however, not present in the blue-emitting shorter compounds COPV1 and COPV2, attributed to the unprotected terminal positions that can degrade by photoreaction in the excited state. Here we report the synthesis of various COPV1 and COPV2 derivatives functionalized at the terminal positions with two types of sterically bulky protecting substituents: Tip (2,4,6-triisopropylphenyl) and tert-butyl (t-Bu) groups. Such molecular designs aim at preventing such photodegradation processes and thus to improve their stability. The efficacy of kinetic isotope effect for stabilization is also examined for COPV2, by the addition at terminal positions of deuterium atoms. Absorption, photoluminescence (PL), including PL quantum yield, and amplified spontaneous emission (ASE) studies have been conducted in polystyrene films doped with each of the derivatives. Significant and slight improvements of the ASE photostability are observed for the compounds with Tip groups and deuterium, respectively. Installation of substituents slightly affects the ASE wavelength within the blue spectral region, that is 385–413 nm and 462–474 nm, for COPV1 and COPV2, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Excited states engineering enables efficient near-infrared lasing in nanographenes

  • Paternò, Giuseppe M.
  • Chen, Qiang
  • Muñoz-Mármol, Rafael
  • Guizzardi, Michele
  • Bonal, Víctor
  • Kabe, Ryota
  • Barker, Alex
  • Boj, Pedro G.
  • Chatterjee, Shreyam
  • Ie, Yutaka
  • Villalvilla, José M.
  • Quintana, José A.
  • Scotognella, Francesco
  • Müllen, Klaus
  • Díaz-García, María A.
  • Narita, Akimitsu
  • Lanzani, Guglielmo
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
The spectral overlap between stimulated emission (SE) and absorption from dark states (i.e. charges and triplets) especially in the near-infrared (NIR), represents one of the most effective gain loss channel in organic semiconductors. Recently, bottom-up synthesis of atomically precise graphene nanostructures, or nanographenes (NGs), has opened a new route for the development of environmentally and chemically stable materials with optical gain properties. However, also in this case, the interplay between gain and absorption losses has hindered the attainment of efficient lasing action in the NIR. Here, we demonstrate that the introduction of two fluoranthene imide groups to the NG core leads to a more red-shifted emission than the precursor NG molecule (685 vs. 615 nm) and also with a larger Stokes (45 nm vs. 2 nm, 1026 cm-1 vs. 53 cm-1, respectively). Photophysical results indicate that, besides the minimisation of ground state absorption losses, such substitution permits to suppress the detrimental excited state absorption in the NIR, which likely arises from a dark state with charge-transfer character. This has enabled NIR lasing (720 nm) from all-solution processed distributed feedback devices with one order of magnitude lower thresholds than those of previously reported NIR-emitting NGs. This study represents an advance in the field of NGs and, in general, organic semiconductors photonics, towards the development of cheap and stable NIR lasers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Simultaneous Determination of Refractive Index and Thickness of Submicron Optical Polymer Films from Transmission Spectra

  • Bonal, Víctor
  • Quintana, José A.
  • Villalvilla, José M.
  • Muñoz-Mármol, Rafael
  • Mira-Martínez, Jose C.
  • Boj, Pedro G.
  • Cruz, María E.
  • Castro, Yolanda
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
High-transparency polymers, called optical polymers (OPs), are used in many thin-film devices, for which the knowledge of film thickness (h) and refractive index (n) is generally required. Spectrophotometry is a cost-effective, simple and fast non-destructive method often used to determine these parameters simultaneously, but its application is limited to films where h > 500 nm. Here, a simple spectrophotometric method is reported to obtain simultaneously the n and h of a sub-micron OP film (down to values of a few tenths of a nm) from its transmission spectrum. The method is valid for any OP where the n dispersion curve follows a two-coefficient Cauchy function and complies with a certain equation involving n at two different wavelengths. Remarkably, such an equation is determined through the analysis of n data for a wide set of commercial OPs, and its general validity is demonstrated. Films of various OPs (pristine or doped with fluorescent compounds), typically used in applications such as thin-film organic lasers, are prepared, and n and h are simultaneously determined with the proposed procedure. The success of the method is confirmed with variable-angle spectroscopic ellipsometry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Blue and Deep‐Blue‐Emitting Organic Lasers with Top‐Layer Distributed Feedback Resonators

  • Bonal, Víctor
  • Villalvilla, José M.
  • Quintana, José A.
  • Boj, Pedro G.
  • Lin, Naiti
  • Watanabe, Shoya
  • Kazlauskas, Karolis
  • Adomeniene, Ona
  • Juršėnas, Saulius
  • Tsuji, Hayato
  • Nakamura, Eiichi
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
All‐solution processed surface‐emitting organic distributed feedback lasers are attractive devices for low‐cost applications. Here, lasers emitting in the spectral region between 375 and 475 nm, in which both active material and resonator (1D relief gratings) are based on solution‐processable polymer films, are reported. Ten different organic compounds dispersed in polystyrene are used as active layers of the prepared devices. They include various carbon‐bridged oligo(p‐phenylenevinylene) (COPVn, with n = 1,2) derivatives and two terfluorene compounds. The synthesis and complete optical and amplified spontaneous emission properties of one of the COPV1 compounds, COPV1(Me)‐t‐Bu, designed for deep‐blue emission, are also included. The feasibility of the resonator fabrication, performed by holographic lithography with a dichromated gelatine photoresist over the active film, is successfully demonstrated for all devices. Remarkably, no resolution limitations are found even for the lowest grating period (235 nm) required for the fabrication of the laser based on COPV1(Me)‐t‐Bu. It is also demonstrated that the rectangular grating profile with duty cycle 0.75:0.25 (hill:valley) is very convenient to optimize the resonator efficacy.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sub-400 nm film thickness determination from transmission spectra in organic distributed feedback lasers fabrication

  • Bonal, Víctor
  • Quintana, José A.
  • Muñoz-Mármol, Rafael
  • Villalvilla, José M.
  • Boj, Pedro G.
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
The design and fabrication of thin-film based organic optoelectronic devices require knowledge of the film optical properties. A low-cost and non-destructive method often used for optical characterization of films is the well-established spectrophotometric envelope method. However, this method is typically limited to thickness above 400 nm, a value often higher than that of the films involved in these devices. This paper studies a procedure to obtain the thickness of sub-400 nm active films from their spectrophotometric trace when the refractive index is previously known. The proposed procedure is based on comparing the experimental transmission spectrum in the transparent spectral window with that obtained by simulation. The capabilities of the proposed method are demonstrated here by its application in the fabrication of organic distributed feedback lasers, for which a fine control of film thickness is important to obtain an optimized and reproducible response. Results are verified with other techniques, such as ellipsometry and profilometry. Thus, with the proposed method, film thickness can be easily determined down to 40 nm maintaining an accuracy of about 5 nm even for films with low refractive index (1.5–1.7). Different methods to determine refractive index of these films are also discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Substituents at Imide Positions on the Laser Performance of 1,7-Bay-Substituted Perylenediimide Dyes

  • Muñoz-Mármol, Rafael
  • Boj, Pedro G.
  • Villalvilla, José M.
  • Quintana, José A.
  • Zink-Lorre, Nathalie
  • Sastre Santos, Ángela
  • Aragó March, Juan
  • Ortí Guillén, Enrique
  • Baronas, Paulius
  • Litvinas, Džiugas
  • Juršėnas, Saulius
  • Fernández Lázaro, Fernando
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Perylenediimide (PDI) compounds with no substituents in their core are widely used as the active units of thin-film organic lasers. Recently, bay-substituted PDIs (b-PDIs) bearing two sterically hindering diphenylphenoxy groups at the 1,7-bay positions have received great attention because they show red-shifted emission with respect to bay-unsubstituted PDIs, while maintaining high photoluminescence (PL) quantum yields and low amplified spontaneous emission (ASE) thresholds even at high doping rates. However, their ASE photostability is relatively low compared to that of state-of-the-art PDIs. Thus, the design of b-PDIs with improved ASE photostability remains a challenge. Here, the synthesis of two b-PDIs with phenyl-type substituents at the imide positions is reported. Complete characterization of their optical properties, including absorption, PL, ASE, and transient spectroscopy, supported also by quantum chemical calculations, is performed with the dyes diluted in either a liquid solvent or a polystyrene film. Film experiments were accomplished at very low doping rates, to resemble the isolated molecule behavior, and also in a range of increasing doping rates, to investigate concentration quenching effects. The reported b-PDIs show improved ASE photostability (3-fold) with respect to b-PDIs with aliphatic-type substituents at the imide positions, whilst they show more propensity toward aggregation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unveiling photophysical and photonic phenomena by means of optical gain measurements in waveguides and solutions

  • Cerdán, Luis
  • Anni, Marco
  • De Giorgi, Maria Luisa
  • Boj, Pedro G.
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
The increasing number of solution-processed laser compounds that can be implemented as low-cost, flexible, and/or integrated devices, makes necessary the development of reliable methods to delineate all their amplifying signatures and thus to open the door to appropriate cross-sample comparisons. Seeking to solve this problem, a new formalism to retrieve the losses and the optical gains from Amplified Spontaneous Emission (ASE) spectra as a function of the excitation density has been recently reported. In this manuscript, we explore the potential of this methodology to unveil relevant information on the photonic properties of the waveguiding devices and on the photophysics of the active materials. We demonstrate that the Variable Pump Intensity method opens the door to understand the relationship between the ASE thresholds and the optical gains and losses, it enables the extraction of the scattering/modal losses of the passive devices, and it can unveil the presence of leaky-modes and excited state absorption. In contrast, it does not perform too well in samples with multiple active species in its current implementation. We have substantiated all these findings using organic semiconductor thin films, several dye-doped polymer thin films and solutions of boron hydride.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Near-Infrared Lasing in Four-Zigzag Edged Nanographenes by 1D versus 2D Electronic π-Conjugation

  • Muñoz-Mármol, Rafael
  • Gordillo Gámez, Fernando
  • Bonal, Víctor
  • Villalvilla, José M.
  • Boj, Pedro G.
  • Quintana, José A.
  • Ross, Aaron M.
  • Paternò, Giuseppe M.
  • Scotognella, Francesco
  • Lanzani, Guglielmo
  • Derradji, Amel
  • Sancho-Garcia, Juan-Carlos
  • Gu, Yanwei
  • Wu, Jishan
  • Casado, Juan
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Sancho-Garcia, Juan-Carlos|||/items/c44aeec1-46c2-4d49-af1e-c8f274485704
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
The search of compounds emitting in the near-infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four-zigzag edged NGs of the [m,n]peri-acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP-Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP-Ar shows dual-ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top-layer resonators. This study paves the way towards the development of stable low-cost all-plastic NIR lasers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Perylene‐Fused, Aggregation‐Free Polycyclic Aromatic Hydrocarbons for Solution‐Processed Distributed Feedback Lasers

  • Zou, Ya
  • Bonal, Víctor
  • Moles Quintero, Sergio
  • Boj, Pedro G.
  • Villalvilla, José M.
  • Quintana, José A.
  • Li, Guangwu
  • Wu, Shaofei
  • Jiang, Qing
  • Ni, Yong
  • Casado, Juan
  • Díaz-García, María A.
  • Wu, Jishan
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Perylene‐fused, aggregation‐free polycyclic aromatic hydrocarbons with partial zigzag periphery (ZY‐01, ZY‐02, and ZY‐03) were synthesized. X‐ray crystallographic analysis reveals that there is no intermolecular π–π stacking in any of the three molecules, and as a result, they show moderate‐to‐high photoluminescence quantum yield in both solution and in the solid state. They also display the characteristic absorption and emission spectra of perylene dyes. ZY‐01 and ZY‐02 with a nearly planar π‐conjugated skeleton exhibit amplified spontaneous emission (ASE) when dispersed in polystyrene thin films. Solution‐processed distributed feedback lasers have been fabricated using ZY‐01 and ZY‐02 as active gain materials, both showing narrow emission linewidth (<0.4 nm) at wavelengths around 515 and 570 nm, respectively. In contrast, ZY‐03 did not show ASE and lasing, presumably due to its highly twisted backbone, which facilitates nonradiative internal conversion and intersystem crossing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photophysical and Laser Studies on Perylenediimides and Nanographenes

  • Muñoz-Mármol, Rafael
Los compuestos orgánicos conjugados han sido investigados ampliamente debido a su versatilidad para integrarse con otros materiales a través de métodos de bajo coste y a su idoneidad para una amplia gama de aplicaciones optoelectrónicas; por ejemplo, transistores de efecto de campo, células solares, LEDs y láseres, entre otros. Actualmente existe un interés particular en los materiales orgánicos para láser promovido por el desarrollo de aplicaciones biomédicas y de telecomunicaciones. De hecho, el desarrollo de técnicas bottom-up en la síntesis orgánica y de métodos computacionales químico-cuánticos permiten el diseño inteligente de compuestos orgánicos con propiedades a medida que pueden ser beneficiosas para tales aplicaciones. En este sentido, comprender la relación entre las características estructurales de los compuestos orgánicos y sus propiedades optoelectrónicas es una etapa obligatoria en el proceso de diseño. En el desarrollo de esta tesis se evalúan las propiedades fotofísicas de dos familias de compuestos orgánicos –perilenodiimidas y nanografenos– dispersos en matrices inertes con el objetivo de mejorar su funcionamiento como materiales activos para láseres. En particular, se han llevado a cabo tres actuaciones: 1) la investigación sistemática de dos polímeros termoplásticos comerciales, poliestireno y polimetilmetacrilato, como matrices inertes para dispersar compuestos de perilenodiimida con un enfoque en optimizar las propiedades de la guía de ondas y reducir los requisitos de energéticos de los dispositivos; 2) conocer los mecanismos de fotodegradación y quenching de la fotoluminiscencia en derivados de perilenodiimida dispersos en películas de poliestireno con el objetivo de obtener dispositivos más duraderos y eficientes; y 3) estudiar las propiedades fotofísicas de compuestos novedosos de la familia de los nanografenos dispersos en matrices inertes con el fin de comprender la relación entre su estructura –borde, heteroátomos, sustituyentes– y su ganancia óptica.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlling the emission properties of solution-processed organic distributed feedback lasers through resonator design

  • Bonal, Víctor
  • Quintana, José A.
  • Villalvilla, José M.
  • Boj, Pedro G.
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Surface-emitting distributed feedback (DFB) lasers with both, resonator and active material based on solution-processable polymers, are attractive light sources for a variety of low-cost applications. Besides, the lasers should have competitive characteristics compared to devices based on high-quality inorganic resonators. Here, we report high performing all-solution-processed organic DFB lasers, consisting of water-processed photoresist layers with surface relief gratings located over the active films, whose emission properties can be finely tuned through resonator design. Their laser threshold and efficiency are simultaneously optimized by proper selection of residual resist thickness and grating depth, d. Lowest thresholds and largest efficiencies are obtained when there is no residual layer, while a trade-off between threshold and efficiency is found in relation to d, because both parameters decrease with decreasing d. This behaviour is successfully explained in terms of an overlap factor r, defined to quantify the interaction strength between the grating and the light emitted by the active film and traveling along it, via the evanescent field. It is found that optimal grating depths are in the range 100–130 nm (r ~ 0.5−0.4). Overall, this study provides comprehensive design rules towards an accurate control of the emission properties of the reported lasers.