Pasar al contenido principal

MATERIALES FOTONICOS "DISEÑADOS A MEDIDA" COMO MARCADORES AVANZADOS PARA BIOIMAGEN

MAT2017-83856-C3-1-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A General Modular Approach for the Solubility Tagging of BODIPY Dyes

  • Blázquez Moraleja, Alberto
  • Álvarez Fernández, Delia
  • Prieto Montero, Ruth
  • García Moreno, Inmaculada
  • Martínez Martínez, Virginia
  • Bañuelos Prieto, Jorge
  • Sáenz de Santa María, Inés
  • Chiara, María Dolores
  • Chiara, José Luis
We describe a general and practical strategy for the direct one-step incorporation of a tunable solubility module at the boron atom of F-BODIPY dyes. The tethering reaction uses easy-to-handle reagents, has broad functional group compatibility and proceeds under mild conditions without requiring any pre-functionalization of the starting F-BODIPY to yield the solubility-tagged O-BODIPY derivative in 51-86% yield. The module can be introduced at the end of the synthetic route without perturbing the fluorophore scaffold, thus minimizing difficulties in product isolation. Its orthogonal geometrical arrangement with respect to the plane of the 2 BODIPY chromophore hampers intermolecular aggregation processes that quench fluorescence, while the covalent attachment to the boron atom has a minimal effect on the absorption properties. Fully water-soluble and hydrolytically stable BODIPYs were prepared by incorporating either neutral (tetra- and octaethylene glycol chains) or zwitterionic (sulfobetaine) hydrophilic tags in the module. The new dyes are valuable live cell imaging probes that ameliorate the undesired partitioning into lipophilic compartments that is often observed for standard BODIPYs. This strategy can be readily adapted to the general and highly practical post-synthetic introduction of new functionalities into F-BODIPY dyes, including phase-tagging, by appropriately choosing the nature of the chemical tags attached to the module., Spanish Ministerio de Economía y Competitividad (MINECO, projects MAT2017-83856-C3-1-P, MAT2017-83856-C3-3-P, and MAT2015-68837-REDT) and Gobierno Vasco (IT912-16)
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unveiling photophysical and photonic phenomena by means of optical gain measurements in waveguides and solutions

  • Cerdán, Luis
  • Anni, Marco
  • De Giorgi, Maria Luisa
  • Boj, Pedro G.
  • Díaz-García, María A.
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
The increasing number of solution-processed laser compounds that can be implemented as low-cost, flexible, and/or integrated devices, makes necessary the development of reliable methods to delineate all their amplifying signatures and thus to open the door to appropriate cross-sample comparisons. Seeking to solve this problem, a new formalism to retrieve the losses and the optical gains from Amplified Spontaneous Emission (ASE) spectra as a function of the excitation density has been recently reported. In this manuscript, we explore the potential of this methodology to unveil relevant information on the photonic properties of the waveguiding devices and on the photophysics of the active materials. We demonstrate that the Variable Pump Intensity method opens the door to understand the relationship between the ASE thresholds and the optical gains and losses, it enables the extraction of the scattering/modal losses of the passive devices, and it can unveil the presence of leaky-modes and excited state absorption. In contrast, it does not perform too well in samples with multiple active species in its current implementation. We have substantiated all these findings using organic semiconductor thin films, several dye-doped polymer thin films and solutions of boron hydride.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A general modular approach for the solubility tagging of BODIPY dyes

  • Blázquez-Moraleja, Alberto
  • Álvarez-Fernández, Delia
  • Prieto Montero, Ruth
  • García-Moreno, I.
  • Martínez-Martínez, Virginia
  • Bañuelos Prieto, Jorge
  • Sáenz-de-Santa-María, Inés
  • Chiara, María-Dolores
  • Chiara, José Luis
We describe a general and practical strategy for the direct one-step incorporation of a tunable solubility module at the boron atom of F-BODIPY dyes. The tethering reaction uses easy-to-handle reagents, has broad functional group compatibility and proceeds under mild conditions without requiring any pre-functionalization of the starting F-BODIPY to yield the solubility-tagged O-BODIPY derivative in 51–86% yield. The module can be introduced at the end of the synthetic route without perturbing the fluorophore scaffold, thus minimizing difficulties in product isolation. Its orthogonal geometrical arrangement with respect to the plane of the BODIPY chromophore hampers intermolecular aggregation processes that quench fluorescence, while the covalent attachment to the boron atom has a minimal effect on the absorption properties. Fully water-soluble and hydrolytically stable BODIPYs were prepared by incorporating either neutral (tetra- and octaethylene glycol chains) or zwitterionic (sulfobetaine) hydrophilic tags in the module. The new dyes are valuable live cell imaging probes that ameliorate the undesired partitioning into lipophilic compartments that is often observed for standard BODIPYs. This strategy can be readily adapted to the general and highly practical post-synthetic introduction of new functionalities into F-BODIPY dyes, including phase-tagging, by appropriately choosing the nature of the chemical tags attached to the module., We gratefully acknowledge the Spanish Ministerio de Economía y Competitividad (MINECO, projects MAT2017-83856-C3-1-P, MAT2017-83856-C3-3-P, and MAT2015-68837-REDT), the Instituto de Salud Carlos III-Fondo de Investigación Sanitaria (CIBERONC) and Gobierno Vasco (IT912-16) for financial support. A. B.-M. and R. P. M. thank MINECO and UPV-EHU for a FPI predoctoral contract and predoctoral fellowship, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shedding Light on the Mitochondrial Matrix Through a Functional Membrane Transporter

  • Blázquez-Moraleja, Alberto
  • Sáenz-de-Santa María, Inés
  • Chiara, María-Dolores
  • Álvarez- Fernández, Delia
  • García-Moreno, I.
  • Prieto Montero, Ruth
  • Martínez-Martínez, Virginia
  • López-Arbeloa, Íñigo
  • Chiara, José Luis
Electronic Supplementary Information (ESI) available: Supplementary figures and tables and copies of the 1H and 13C NMR (1D and 2D) spectra of the new compounds., The first fluorescent probes that are actively channeled into the mitochondrial matrix by a specific mitochondrial membrane transporter in living cells have been developed. The new functional probes (BCT) have a minimalist structural design based on the highly efficient and photostable BODIPY chromophore and carnitine as a biotargeting element. Both units are orthogonally bonded through the common boron atom, thus avoiding the use of complex polyatomic connectors. In contrast to known mitochondria-specific dyes, BCTs selectively label these organelles regardless of their transmembrane potential and in an enantioselective way. The obtained experimental evidence supports carnitine-acylcarnitine translocase (CACT) as the key transporter protein for BCTs, which behave therefore as acylcarnitine biomimetics. This simple structural design can be readily extended to other structurally diverse starting FBODIPYs to obtain BCTs with varied emission wavelengths along the visible and NIR spectral regions and with multifunctional capabilities. BCTs are the first fluorescent derivatives of carnitine to be used in cell microscopy and stand as promising research tools to explore the role of the carnitine shuttle system in cancer and metabolic diseases. Extension of this approach to other small-molecule mitochondrial transporters is envisaged., We gratefully acknowledge the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI), and European Regional Development Fund (ERDF) (projects MAT2017-83856-C3-1-P, MAT2017-83856-C3-3-P, and MAT2015-68837-REDT), Gobierno Vasco (IT912-16), and the Instituto de Salud Carlos III-Fondo de Investigación Sanitaria (CIBERONC and PI17/01901) for financial support. A. B.-M. and R. P. M. thank MCIU, AEI and ERDF, and UPV-EHU for a FPI predoctoral contract and predoctoral fellowship, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Photonic Behavior of Symmetrical bis-BODIPY Architectures: The Key Role of the Spacer Moiety

  • Oliden-Sánchez, Ainhoa
  • Sola-Llano, R.
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Uriel, Clara
  • López Pérez, J. Cristóbal
  • Gómez, Ana M.
Herein we describe the synthesis, computationally assisted spectroscopy, and lasing properties of a new library of symmetric bridged bis-BODIPYs that differ in the nature of the spacer. Access to a series of BODIPY dimers is straightforward through synthetic modifications of the pending ortho-hydroxymethyl group of readily available C-8 (meso) ortho-hydroxymethyl phenyl BODIPYs. In this way, we have carried out the first systematic study of the photonic behavior of symmetric bridged bis-BODIPYs, which is effectively modulated by the length and/or stereoelectronic properties of the spacer unit. The designed bis-BODIPYs display bright fluorescence and laser emission in non-polar media. The fluorescence response is governed by the induction of a non-emissive intramolecular charge transfer (ICT) process, which is significantly enhanced in polar media. The effectiveness of the fluorescence quenching and also the prevailing charge transfer mechanism (from the spacer itself or between the BODIPY units) rely directly on the electron-releasing ability of the spacer. Moreover, the linker moiety can also promote intramolecular excitonic interactions, leading to excimer-like emission characterized by new spectral bands and the lengthening of lifetimes. The substantial influence of the bridging moiety on the emission behavior of these BODIPY dyads and their solvent-sensitivity highlight the intricate molecular dynamics upon excitation in multichromophoric systems. In this regard, the present work represents a breakthrough in the complex relationship between the molecular structure of the chromophores and their photophysical signatures, thus providing key guidelines for rationalizing the design of tailored bis-BODIPYs with potential advanced applications., We gratefully acknowledge the Spanish Ministerio de Economia y Competitividad (MINECO) (MAT2017-83856-C3-1-P and 3-P; CTQ2015-66702-R), Ministerio de Economía y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (FEDER) (CTQ2015-66702-R, MINECO/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI), Fondo Europeo de Desarrollo Regional (FEDER) (RTI2018-094862-B-I00, MCIU/AEI/FEDER, UE), and Gobierno Vasco (project IT912- 16) for financial support. AO-S and RS-L thank UPV/EHU and Gobierno Vasco for a predoctoral fellowship and a postdoctoral contract, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Efficient and Photostable Red-Emitting Photonic Materials Based on Symmetric All-BODIPY-Triads, -Pentads, and -Hexads

  • Avellanal-Zaballa, E.
  • Ventura, J.
  • Gartzia-Rivero, L.
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Uriel, Clara
  • Gómez, Ana M.
  • López Pérez, J. Cristóbal
The development of efficient and stable red and near-IR emitting materials under hard radiation doses and/or prolonged times is a sought-after task due to their widespread applications in optoelectronics and biophotonics. To this aim, novel symmetric all-BODIPY-triads, -pentads, and -hexads have been designed and synthesized as light-harvesting arrays. These photonic materials are spectrally active in the 655–730 nm region and display high molar absorption across UV–visible region. Furthermore, they provide, to the best of our knowledge, the highest lasing efficiency (up to 68 %) and the highest photostability (tolerance >1300 GJ mol) in the near-IR spectral region ever recorded under drastic pumping conditions. Additionally, the modular synthetic strategy to access the cassettes allows the systematic study of their photonic behavior related to structural factors. Collectively, the outstanding behavior of these multichromophoric photonic materials provides the keystone for engineering multifunctional systems to expedite the next generation of effective red optical materials., We gratefully acknowledge the Spanish Ministerio de Economia yCompetitividad for financial support (projectsCTQ201566702-R, MAT2017-83856-C3-1-P and 3-P). We also thank the Ministerio de Ciencia InnovacijnyU niversidades (project RTI2018-094862-B-I00) and the Gobierno Vasco for financial support (project IT912-16)and for apredoctoral fellowship to E.A.Z. The authors thank SGIker of UPV/EHU for technical support with the computational calculations, which were carried out in the “arina” informatic clust
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

BOPHYs versus BODIPYs: A comparison of their performance as effective multi-function organic dyes

  • Sola-Llano, R.
  • Jiménez, J.
  • Avellanal-Zaballa, E.
  • Johnson, M.
  • Cabreros, T.A.
  • Moreno, F.
  • Maroto, B.L.
  • Müller, G.
  • Bañuelos, Jorge
  • Cerdán, L.
  • García-Moreno, I.
  • Moya, Santiago de la
11 pags., 8 figs., 2tabs., 1 app., The computationally-aided photophysical and lasing properties of a selected battery of BOPHYs are described and compared to those of related BODIPY counterparts. The present joined theoretical-experimental study helps to put into context the weaknesses and strengths of both dye families under different irradiation conditions. The chemical versatility of the BOPHY scaffold has been also comparatively explored to modulate key photonic properties towards the development of red-emitting dyes, chiroptical dyes and singlet oxygen photosensitizers. Thus, BOPHY BINOLation by fluorine substitution with enantiopure BINOLs endows the BOPHY chromophore with chiroptical activity, as supporting by the simulated circular dichroism, decreasing deeply its fluorescent response due to the promotion of fluorescence-quenching intramolecular charge transfer (ICT). Interestingly, the sole alkylation of the BOPHY core strongly modulates the promotion of ICT, allowing the generation of highly bright BINOL-based BOPHY dyes. Moreover, 3,3′-dibromoBINOLating BOPHYs can easily achieve singlet-oxygen photogeneration, owing to spin-orbit coupling mediated by heavy-atom effect feasible in view of the theoretically predicted disposition of the bromines surrounding the chromophore. From this background, we have established the master guidelines to design bright fluorophores and laser dyes, photosensitizers for singlet oxygen production and chiroptical dyes based on BOPHYs. The possibility to finely mix and balance such properties in a given molecular scaffold outstands BOPHYs as promising dyes competing with the well-settled BODIPY dyes., Financial support from MINECO (MAT2017-83856-C3-1-P, -2-P and-3-P) and Gobierno Vasco (IT912-16) is gratefully acknowledged. G.M.thanks the NIH, Minority Biomedical Research Support (1 SC3GM089589-08), and the Henry Dreyfus Teacher-Scholar Award forfi-nancial support. E.A.Z. and R.S.L. thank Gobierno Vasco for a pre-doctoral fellowship and a postdoctoral contract, respectively. J.J.thanks Comunidad de Madrid/UCM for a research contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficiency of methylene blue-mediated photodynamic therapy vs intense pulsed light in the treatment of onychomycosis in the toenails

  • Alberdi, E.
  • Gómez-Hernández, María Clara
9 pags., 3 figs., 5 tabs., Background: Photodynamic therapy (PDT) or intense pulsed light (IPL) are efficient therapeutic methods in the treatment of superficial skin infections, and thus, they could be good options for onychomycosis treatment, the most common nail disorder. Methods: Forty patients, affected with different diagnosed types of onychomycosis in nails of the first toe, were randomly divided into two groups of 20 patients to be treated by PDT or IPL. Nail plates were softened with urea 40% by occlusive dressing for 12 hours during 3-7 days before treatments. Then, eight sessions separated by an interval of 2 weeks of a PDT protocol mediated by methylene blue (MB) and red laser diode (Periowave, λ = 670 nm, 200 mW) or an IPL protocol based on 10 pulses/cm (Dye-VL-F module, Alma Lasers, λ = 500-600 nm, 10 J) were applied. Results: Both treatments reduced significantly the Onychomycosis Severity Index (OSI) (P < 0.05). In terms of complete cure: 70% (PDT) and 80% (IPL) of the patients reached it after 12 weeks post-treatment. No patient reported any adverse effects or complications, although in the IPL Group, some referred pain sensation during light irradiation and hematomas apparition. Conclusions: Photodynamic therapy and IPL were effective for onychomycosis cure of any etiology., Ministerio de Economía, Industria y Competitividad MINECO, Grant/Award Number: MAT 2017-83856-C3-1-P and MAT2015-68837-REDT; Fundación Eugenio Rodríguez Pascua
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

O-BODIPY Dyes: Synthesis, Properties and Applications in Cell Microscopy

  • Blázquez-Moraleja, Alberto
  • Saenz de Santa María, I.
  • Chiara, María-Dolores
  • Álvarez-Fernández, D.
  • García-Moreno, I.
  • Prieto Montero, Ruth
  • Martínez-Martínez, Virginia
  • Bañuelos, Jorge
  • López-Arbeloa, Íñigo
  • Chiara, José Luis
Bangkok, Thailand, 18 - 21 June 2019. -- https://www.rsc.org/events/detail/36767/20th-tetrahedron-symposium, We have developed a general post-synthetic strategy for the direct one-step incorporation of hydroxy acids and diacids at the boron atom of F-BODIPY dyes. The tethering reaction uses easy-to-handle reagents, has broad functional group compatibility and proceeds under mild conditions without requiring any pre-functionalization of the starting F-BODIPY to afford the corresponding O-BODIPY derivative in good yield. The orthogonal geometrical arrangement of the hydroxyl acid or diacid moiety with respect to the mean plane of the BODIPY chromophore hampers intermolecular aggregation processes that quench fluorescence, while the covalent attachment to the boron atom has a minimal effect on the absorption properties of the chromophore. We will describe the application of this strategy to the one-step tagging of BODIPYs for the custom modification of their solubility properties and to the preparation of fluorescent probes for mitochondria targeting via a functional membrane transporter. In the first application, fully water-soluble and hydrolytically stable BODIPYs were prepared in a single step by incorporating a hydroxy acid solubility module having either neutral (tetra- and octa-ethylene glycol chains) or switterionic (sulfobetaine) hydrophilic tags. The resulting BODIPYs are valuable live cell imaging probes. In the second application, we have designed the first fluorescent probes that are actively channelled into the mitochondrial matrix by the carnitine system in living cells. Our functional probes have a minimalist structural design based on the BODIPY chromophore and carnitine as a biotargeting element. The new fluorescent probes selectively label mitochondria regardless of their membrane potential and in an enantioselective way., We gratefully acknowledge financial support by the Spanish Ministry of Science, Innovation and Universities (projects MAT2017-83856-C3-1/3-P, MAT2014-51937-C3-1/3 and MAT2015-68837-REDT), and for a FPI contract to ABM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BODIPYs revealing lipid droplets as valuable targets for photodynamic theragnosis

  • Tabero, Andrea
  • García-Garrido, F.
  • Prieto-Castañeda, A.
  • Palao, E.
  • Agarrabeitia, A.R.
  • García-Moreno, I.
  • Villanueva, A.
  • De La Moya, S.
  • Ortiz, M.J.
4 pags., 3 figs., 1 tab., Endowing BODIPY PDT agents with the ability to probe lipid droplets is demonstrated to boost their phototoxicity, allowing the efficient use of highly fluorescent dyes (poor ROS sensitizers) as phototoxic agents. Conversely, this fact opens the way to the development of highly bright ROS photosensitizers for performing photodynamic theragnosis (fluorescence bioimaging and photodynamic therapy) from a single simple agent. On the other hand, the noticeable capability of some of the reported dyes to probe lipid droplets in different cell lines under different conditions reveals their use as privileged probes for advancing the study of interesting lipid droplets by fluorescence microscopy., Financial support from MINECO (CTQ2016-78454-C2-2-R, MAT2017-83856-C3-1-P and MAT2017-83856-C3-2-P) and Comunidad de Madrid (S2013/MIT-2850) is acknowledged. A. T. thanks UAM for a pre-doctoral contract. F. G.-G. and A. P.-C. thank Comunidad de Madrid/UCM for their respective research contracts.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Palette of Efficient and Stable Far-Red and NIR Dye Lasers

  • Avellanal-Zaballa, E.
  • Gartzia-Rivero, L.
  • Bañuelos Prieto, Jorge
  • García-Moreno, I.
  • Agarrabeitia, A.R.
  • Peña-Cabrera, E.
  • Ortiz, María J.
© 2020 by the authors., The disposal of long-wavelength-emitting sources is of paramount relevance in technology and biophotonics due to the low interference with the surroundings that these kinds of far-red and near-infrared radiations hold. As a result of the continued efforts carried out during the last few years by our research group to design new boron-dipyrromethene (BODIPY) dyes with improved photonic performance, two approaches were tested to develop a new generation of organic dyes able to display efficient and long-lasting laser emission in both target spectral regions. On the one hand, the annulation of aromatic benzofuran at the dipyrrin backbone leads to conformationally restricted dyes yielding photostable and bright laser emission beyond 600 nm at the far-red spectral region. On the other hand, a more pronounced shift to longer wavelengths reaching 725 nm at the near-infrared region is feasible, while keeping a reasonably high laser efficiency and tolerance to prolonged and intense pumping, based on aza-BODIPYs bearing peripheral aryl rings. These two complementary strategies yield a library of laser-emitting compounds comprising the 600–725 nm spectral region. Moreover, their laser performance is better than the commercially available dye lasers active in this spectral window., This research was funded by the Spanish Ministerio de Economia y Competitividad (MINECO), grant number MAT2017-83856-C3-1-P, 2-P and 3-P, and Gobierno Vasco, grant number IT912-16., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multichromophoric COO-BODIPYs: An advantageous design for the development of energy transfer and electron transfer systems

  • Ray, C.
  • Schad, C.
  • Avellanal-Zaballa, E.
  • Moreno, F.
  • Maroto, B.L.
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Moya, Santiago de la
4 pags., 4 figs., COO-BODIPYs are highlighted as cutting edge scaffolds for easy access to a new generation of multichromophoric architectures with enhanced (photo)chemical stability, showing either boosted capability for excitation energy transfer, glow fluorescence and laser emission, or photoinduced electron transfer. The new finding paves the way for the rapid development of smarter organic dyes for advancing photonics and optoelectronics. This journal is, Financial support from the Spanish MICIU (MAT2017- 83856-C3-1-P, -2-P and -3-P) and Gobierno Vasco (IT912-16) is gratefully acknowledged. C. R. and C. S. thank Comunidad de Madrid/UCM for the research contract. E. A. Z. thanks Gobierno Vasco for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Red/NIR Thermally Activated Delayed Fluorescence from Aza-BODIPYs

  • Avellanal-Zaballa, E.
  • Prieto-Castañeda, A.
  • García-Garrido, F.
  • Agarrabeitia, A.R.
  • Rebollar, Esther
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Ortiz, M.J.
9 pags., 5 figs., 2 tabs., The search for long-lived red and NIR fluorescent dyes is challenging and hitherto scarcely reported. Herein, the viability of aza-BODIPY skeleton as a promising system for achieving thermal activated delayed fluorescent (TADF) probes emitting in this target region is demonstrated for the first time. The synthetic versatility of this scaffold allows the design of energy and charge transfer cassettes modulating the stereoelectronic properties of the energy donors, the spacer moieties and the linkage positions. Delayed emission from these architectures is recorded in the red spectral region (695–735 nm) with lifetimes longer than 100 μs in aerated solutions at room temperature. The computational-aided photophysical study under mild and hard irradiation regimes disclose the interplay between molecular structure and photonic performance to develop long-lived fluorescence red emitters through thermally activated reverse intersystem crossing. The efficient and long-lasting NIR emission of the newly synthesized aza-BODIPY systems provides a basis to develop advanced optical materials with exciting and appealing photonic response., We gratefully acknowledge the Spanish Ministerio de Economia y Competitividad for financial support (projects MAT2017-83856-C3-1-P,2-P and3-P). We also thank the Gobierno Vasco for financial support (project IT912-16) and for apredoctoralfellowship to E.A.-Z. The authors thank SGIker of UPV/EHUfortechnical support with the computational calculations, whichwere carriedout in the “ARIN A” informatic cluster.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BODIPYs as Chemically Stable Fluorescent Tags for Synthetic Glycosylation Strategies towards Fluorescently Labeled Saccharides

  • Uriel, Clara
  • Permingeat, Caterina
  • Ventura Toledano, Juan A.
  • Avellanal-Zaballa, E.
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Gómez, Ana M.
  • López Pérez, J. Cristóbal
A series of fluorescent boron-dipyrromethene (BODIPY, 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) dyes have been designed to participate, as aglycons, in synthetic oligosaccharide protocols. As such, they served a dual purpose: first, by being incorporated at the beginning of the process (at the reducing-end of the growing saccharide moiety), they can function as fluorescent glycosyl tags, facilitating the detection and purification of the desired glycosidic intermediates, and secondly, the presence of these chromophores on the ensuing compounds grants access to fluorescently labeled saccharides. In this context, a sought-after feature of the fluorescent dyes has been their chemical robustness. Accordingly, some BODIPY derivatives described in this work can withstand the reaction conditions commonly employed in the chemical synthesis of saccharides; namely, glycosylation and protecting-group manipulations. Regarding their photophysical properties, the BODIPY-labeled saccharides obtained in this work display remarkable fluorescence efficiency in water, reaching quantum yield values up to 82 %, as well as notable lasing efficiencies and photostabilities., We gratefully acknowledge the Spanish Ministerio de Econo-mia y Competitividad for financial support (projects CTQ2015-66702-R, MAT2017-83856-C3-1-P and 3-P). We also thank theMinisterio de Ciencia Innovación y Universidades (projectRTI2018-094862-B-I00) and the Gobierno Vasco for financialsupport (project IT912-16) and for apredoctoral fellowship toE. A.-Z. Additionally,C.P., on leave from the UniversidadNacio-nal de Rosario (UNR), is grateful to the EVAmobility program(UNR) for partial financialsupport. Theauthors thank SGIker of UPV/EHUfor technical support with the computational calcula-tions, which were carriedout in the “arina” informatic cluster.We are very grateful to Ms. Marina Rodrguez (IQOG-CSIC) forskillful technical support
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Taming the Photonic Behavior of Laser Dyes Through Specific and Dynamic Self-Assembly onto Cellulose Nanocrystals

  • Avellanal-Zaballa, E.
  • Bañuelos, Jorge
  • Manzano, Hegoi
  • Chiara, José Luis
  • Cerdán, L.
  • García-Moreno, I.
Cellulose nanocrystals (CNCs) display a set of unique properties such as surface charge, nanometric size, and giant dipole moment that have not been considered so far to tame the luminescent properties of organic dyes upon soft and hard photoexcitation. Herein, the first comprehensive analysis on the photonic behavior of laser dyes adsorbed onto CNCs through physically dynamic driving forces is reported. By systematically varying the solvent, the dye molecular structure, and dye/CNC ratios, it is shown that the dye absorption and emission signatures are drastically modified when CNCs are incorporated into the solutions. The photonic characterization, together with molecular dynamic simulations, allows to unravel the labeling interaction processes and unambiguously assigns both the physicochemical properties of the surrounding media and the giant permanent dipole moment of CNCs as the most important factors taming the photophysical and lasing properties of dyes adsorbed on it. Accordingly, a CNC¿induced Stark effect accounts for the absorption and emission spectral changes recorded upon CNC incorporation. Herein, the widely expanding applications of CNCs toward the design of advanced photoactive nanomaterials based on these renewable building blocks are opened up., The authors gratefully acknowledge the Spanish Ministerio de Economia y Competitividad for financial support (projects MAT2017-83856-C3-1-P and3-P). The authors also thank the Gobierno Vasco for financial support (proj-ect IT912-16) and for a predoctoral fellowship to E. A.-Z. The authors thankSGIker of UPV/EHU for technical support with computational calcula-tions, which were carried out in the “ARINA” informatic cluster
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BCl3-Activated Synthesis of COO-BODIPY Laser Dyes: General Scope and High Yields under Mild Conditions

  • Ray, C.
  • Schad, C.
  • Moreno, F.
  • Maroto, B.L.
  • Bañuelos, Jorge
  • Arbeloa, Teresa
  • García-Moreno, I.
  • Villafuerte, C.
  • Müller, G.
  • Moya, Santiago de la
8 pags., 3 figs., 1 sc., A general and straightforward method for the synthesis of COO-BODIPYs from F-BODIPYs and carboxylic acids is established. The method is based on the use of boron trichloride to activate the involved substitution of fluorine, which leads to high yields through rapid reactions under soft conditions. This mild method opens the way to unprecedented laser dyes with outstanding efficiencies and photostabilities, which are difficult to obtain by the current methods., Financial support from Ministerio de Ciencia, Innovacion y ́ Universidades de España (MAT2017-83856-C3-1-P MAT2017-83856-C3-2-P and MAT2017-83856-C3-3-P) and Gobierno Vasco (IT912-16) is gratefully acknowledged. G.M. thanks the NIH, Minority Biomedical Research Support (1 SC3 GM089589-08) and the Henry Dreyfus Teacher-Scholar Award for financial support. C.S. thanks Comunidad de Madrid/UCM for a research contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Concise Route to Water-Soluble 2,6-Disubstituted BODIPY-Carbohydrate Fluorophores by Direct Ferrier-Type C-Glycosylation

  • Gómez, Ana M.
  • Uriel, Clara
  • Oliden-Sánchez, Ainhoa
  • Bañuelos, Jorge
  • García-Moreno, I.
  • López Pérez, J. Cristóbal
8 pags., 5 figs., 1 tab., Novel, linker-free, BODIPY-carbohydrate derivatives containing sugar residues at positions C2 and C6 are efficiently obtained by, hitherto unreported, Ferrier-type C-glycosylation of 8- aryl-1,3,5,7-tetramethyl BODIPYs with commercially available tri-Oacetyl-D-glucal followed by saponification. This transformation, which involves the electrophilic aromatic substitution (SEAr) of the dipyrrin framework with an allylic oxocarbenium ion, provides easy access to BODIPY-carbohydrate hybrids with excellent photophysical properties and a weaker tendency to aggregate in concentrated water solutions, The authors gratefully acknowledge the Spanish Ministerio de Ciencia e Innovación for financial support (Projects RTI2018- 094862-B-100, MAT2017-83856-C3-1-P and -3-P, and PiD2020-114755GB-C31 and -C33) and the Gobierno Vasco (Project IT912-16) for financial support., Peer reviewed