Pasar al contenido principal

APLICACION DE LAS ALEACIONES BASE-FE NANOESTRCTURADAS COMO SOLUCION SOSTENIBLE PARA LOS SISTEMAS DE GENERACION DE ENERGIA DE ALTA EFICIENCIA

MAT2016-80875-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Effect of Ausforming on Creep Strength of G91 Heat-Resistant Steel

  • Vivas Méndez, Javier
  • Rementería, Rosalía
  • Serrano, M.
  • Altstadt, Eberhard
  • San-Martín, David
  • Capdevila, Carlos
Título Libro: Processing and Manufacturing of Advanced Materials, The major challenge in a heat-resistant steel is to generate thermally stable microstructures that allow increasing the operating temperature, which will improve the thermal efficiency of the power plant without diminishing strength or time to rupture. The strengthening mechanism in tempered martensitic 9Cr steels comes mainly from the combination of solid solution effect and of precipitation hardening by fine MX carbo-nitrides, which enhance the sub-boundary hardening. This work is focused on the effect of ausforming processing on MX nanoprecipitation, on both their distribution and number density, during the subsequent tempering heat treatment. The creep strength at 700 oC was evaluated by small punch creep tests. The creep results after ausforming were compared to those obtained after conventional heat treatment concluding, in general, that ausforming boosts the creep strength of the steel at 700 oC. Therefore, conventional ausforming thermomechanical treatment is a promising processing route to raise the operating temperature of 9Cr heat-resistant steels., Authors acknowledge financial support to Spanish Ministerio de Economia y Competitividad (MAT2016-80875-C3-1-R) and Comunidad de Madrid (DIMMAT-CM_S2013/MIT-2775). This work is carried out under the auspices of the Joint Programme on Nuclear Materials of the European Energy Research Alliance Pilot Project CREMAR. J. Vivas acknowledges financial support in the form of a FPI Grant BES-2014-069863.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrical Steels

  • Capdevila, Carlos
Chapter 12 Electrical Steels, A developed electrical system enables power to be generated at key locations and distributed widely. To realize such a system requires means of generation, distribution and utilization. Electrical steels play a key role in an electrical system, alongside copper conductors, they make the whole system feasible. This chapter reviews the production and recent developments, with special attention to coating technologies, of the two main groups of electrical steels, i.e. the grain-oriented electrical steels and the non-grain-oriented grain electrical steels., The author acknowledges financial support to Spanish Ministerio de Economia y Competitividad (MINECO) through in the form of a Coordinate Project (MAT2016-80875-C3-1-R). Authors also acknowledge financial support to Comunidad de Madrid through DIMMAT-CM_S2013/MIT-2775 project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanostructured Steels

  • Capdevila, Carlos
  • García Caballero, Francisca
  • Rementería, Rosalía
Chapter 8 Nanostructured Steels, Nanostructured metals with grain sizes smaller than 100 nm usually exhibit strengths which can be more than twice higher than their coarse-grained counterparts. The “smaller is stronger” effect is generally understood in terms of the Hall-Petch effect of grain size strengthening, or the capability of grain boundaries to obstruct the motion of dislocations as carriers of plastic deformation. Nanostructured steels take benefit of reductions in the grain size to show improved tensile strength, hardness and in-service properties. The steel nanostructures are usually multi-phase and hierarchical, maintaining or even improving the stress-ductility trade-off. The increasing demands for stronger, tougher, wear resistant and heat-tolerant materials have led to the development of new families of steels where the length scale that controls such properties is in the nanometer range. This chapter provides an overview of the current status of the most technologically relevant bulk nanostructured steels, describing the approaches to metallurgical design, processing routes, mechanical properties, in-use behavior and industrial applications., The authors acknowledge financial support from the Spanish Ministerio de Economia y Competitividad (MINECO) in the form of a coordinate project (MAT2016-80875-C3-1-R) and the Research Fund for Coal and Steel of the European Commission under the contract SuperHigh (RFSR-CT-2014-00019).