Pasar al contenido principal

SINTESIS DE MOF SOBRE NUEVOS MATERIALES CELULARES METALICOS PARA LA ELIMINACION Y VALORIZACION DE CO2

MAT2017-86992-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mixed‐Valence Ce/Zr Metal‐Organic Frameworks: Controlling the Oxidation State of Cerium in One‐Pot Synthesis Approach

  • Ronda-Lloret, Maria
  • Pellicer-Carreño, Isaac
  • Grau-Atienza, Aida
  • Boada, Roberto
  • Diaz‐Moreno, Sofia
  • Narciso, Javier
  • Serrano Ruiz, Juan Carlos
  • Sepúlveda-Escribano, Antonio
  • Ramos‐Fernández, Enrique V.
  • Grau-Atienza, Aida|||/items/c4516fa7-6035-4389-9725-5908c8fa92ae
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
The preparation of MOFs including a metal with an easily exchangeable oxidation state, while maintaining the same crystal structure and stability, is of paramount importance for myriad applications. In this work, a new synthesis method is reported that can be used to prepare Ce/Zr‐MOFs (UiO‐66 structure) having only Ce(III), a mixed‐valence Ce(IV)/Ce(III), or only Ce(IV) cations, as desired. The materials are characterized using a large number of techniques, including X‐ray absorption and X‐ray photoelectron spectroscopies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the Synthesis Conditions of MIL-100(Fe) on Its Catalytic Properties and Stability under Reaction Conditions

  • Delgado-Marín, José Javier
  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
MIL-100(Fe) is a metal–organic framework (MOF) characterized by the presence of Lewis acid and Fe(II/III) redox sites. In this work, different synthesis methods for the preparation of MIL-100(Fe) are studied. Depending on the source of fluorine, different phases can be obtained: MIL-100(Fe) and an Fe trimesate with unknown structure which we call Fe(BTC). These materials were characterized using numerous techniques and applied in the reaction of CO2 cycloaddition with epichlorohydrin, a reaction catalyzed by Lewis acid sites. It was observed that samples with more Fe(BTC) phase were more active in the reaction. However, all samples, under reaction conditions, transformed into a less active phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interfacial Phenomena between Liquid Si-rich Si-Zr Alloys and Glassy Carbon

  • Giuranno, Donatella
  • Polkowski, Wojciech
  • Bruzda, Grzegorz
  • Kudyba, Artur
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
To succeed in the design and optimization of liquid-assisted processes such as reactive infiltration for the fabrication of tailored refractory SiC/ZrSi2 composites, the interfacial phenomena that occur when Si-rich Si-Zr alloys are in contact with glassy carbon (GC) were investigated for the first time by the sessile drop method at T = 1450 °C. Specifically, two different Si-rich Si-Zr alloys were selected, and the obtained results in terms of wettability, spreading kinetics, reactivity, and developed interface microstructures were compared with experimental observations that were previously obtained for the liquid Si-rich, Si-Zr, near-eutectic composition (i.e., Si-10 at.%Zr) that was processed under the same operating conditions. The increase of the Si content only weakly affected the overall phenomena that were observed at the interface. From the practical point of view, this means that even Si-Zr alloys with a higher Si content, with respect to the near eutectic alloy, may be potentially used as infiltrant materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New route for the synthesis of Co-MOF from metal substrates

  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Delgado-Marín, José Javier
  • Affolter, Christopher W.
  • Olsbye, Unni
  • Redekop, Evgeniy A.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
The synthesis of MOFs (Metal Organic Frameworks) from reduced metal sources could provide an elegant approach for the recovery of metal waste or to produce MOF coatings on metal or metal alloy surfaces, but this process has not been studied in depth so far. The difficulty of such MOF synthesis lies in the fact that the metal in the MOF structure is oxidized, necessitating in situ metal oxidation during synthesis when starting from reduced metal sources. This can be achieved by various methods including acid etching of the metal. In this method, the metal can be dissolved and oxidized at the same time (pH ∼ <7) and the ligand can be deprotonated (pH ∼> 6) to react with the oxidized metal. We hypothesize that Co MOF can be prepared by this method, since the redox reactions of cobalt are possible in the same pH range in which many MOF linkers can be deprotonated. Therefore, the synthesis of two different Co MOFs using acid etching has been studied. The MOFs prepared (ZIF-67 and MOF-71) have shown the same properties as reference materials prepared from oxidized metal sources and have been studied in water-ethanol separation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Valorization of CO2 through the Synthesis of Cyclic Carbonates Catalyzed by ZIFs

  • Delgado-Marín, José Javier
  • Martín-García, Iris
  • Villalgordo-Hernández, David
  • Alonso, Francisco
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Alonso, Francisco|||/items/4fd923c6-c670-41a9-aaf2-df585aa61da7
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
One way to exploit CO2 is to use it as a feedstock for the production of cyclic carbonates via its reaction with organic epoxides. As far as we know, there is still no heterogeneous catalyst that accelerates the reaction in a selective, efficient and industrially usable way. Cobalt and zinc-based zeolitic imidazole frameworks (ZIFs) have been explored as heterogeneous catalysts for this reaction. In particular, we have prepared ZIF-8 and ZIF-67 catalysts, which have been modified by partial replacement of 2-methylimidazole by 1,2,4-triazole, in order to introduce uncoordinated nitrogen groups with the metal. The catalysts have shown very good catalytic performance, within the best of the heterogeneous catalysts tested in the cycloaddition of CO2 with epichlorohydrin. The catalytic activity is due ultimately to defects on the outer surface of the crystal, and varies in the order of ZIF-67-m > ZIF-67 > ZiF-8-m = ZIF-8. Notably, reactions take place under mild reaction conditions and without the use of co-catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and Characterization of the Metal–Organic Framework CIM-80 for Organic Compounds Adsorption

  • Figueroa-Quintero, Leidy
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Metal–organic frameworks (MOF) are a new type of porous materials that have great potential for adsorption of voltaic organic compounds (VOCs). These types of materials composed of metal ions and organic ligands are easy to synthesize, have high surface areas, their surface chemistry can be adjusted to the desired application, and they can also have good chemical and thermal stability. Therefore, this work focuses on the synthesis of a highly hydrophobic MOF material called CIM-80, a porous material that is made up of the Al3+ cation and the mesaconate linker. This MOF has a B.E.T. of approximately 800 m2/g and has potential applications for the adsorption of hydrophobic organic compounds. However, its synthesis is expensive and very dirty. Therefore, we have studied the synthesis conditions necessary to achieve high synthesis yields (85%) and materials with high crystallinity and accessible porosity. To achieve these results, we have used urea as a mild deprotonation reagent and modulator as an alternative to NaOH, which is traditionally used for the synthesis of this MOF. Once the synthesis of this material was controlled, its adsorption/desorption behavior of water and organic compounds such as toluene, cyclohexane and m-xylene was studied by means of vapor adsorption isotherms. The results show the hydrophobic character of the material and the greater affinity the material has toward aliphatic compounds than toward aromatic ones, with toluene being the most adsorbed compound, followed by cyclohexane and m-xylene.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Solid state reactions between SiC and Ir

  • Camarano, Antonio
  • Narciso, Javier
  • Giuranno, Donatella
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and over the temperature range of 1200–1450 °C. As reaction products, various Ir-silicides and free unreacted-C were detected. Reactivity is strongly affected by the temperature and SiC-crystallinity involving a series of interactions, from “no reaction” to “massive exothermic reactions”. In particular, interfacial phenomena are more pronounced by the presence of defects and grain boundaries. Solid state reactions result in formation of fine C-precipitates rearranged in a quasi-periodic microstructure. On the contrary, clustering of highly ordered C-precipitates (C-graphitized) occurs after “massive reactions” take place. A relationship between the degree of graphitization (from 1 to multi-layers of graphene), temperature and SiC crystallinity was found by Raman spectroscopy. 2D-layering phenomenon is enhanced in polycrystalline SiC at high temperature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis of high‐surface area mesoporous SiC with hierarchical porosity for use as catalyst support

  • Ortega Trigueros, Adrián
  • Narciso, Javier
  • Caccia, Mario
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Porous SiC with a hierarchical mesoporous structure is a promising material for high‐performance catalytic systems because of its high thermal conductivity, high chemical inertness at high temperature, and oxidation resistance. Attempts to produce high‐surface area hierarchical SiC have typically been made by using porous carbon as a template and reacting it with either Si or SiO2 at high temperature under inert atmosphere. Because the reaction mechanism with Si involves a carbon dissolution step, and the reaction with SiO2 is highly dependent on C‐SiO2 dispersion, the porous structure of the carbon template is not maintained, and the reaction yields nonporous SiC. In this work, mesoporous SiC has been synthesized using a novel hard‐template methodology. SiC was prepared from hierarchical (mesoporous) silica which served as a solid template. Carbon deposition was done by Carbon Vapor Deposition (CVD) using CH4 as carbon precursor, where different temperatures and reaction times were tested to optimize the carbon coating. The synthesized SiC retained 61 (118 m2/g) and 47% (0.3 cm3/g) of the BET surface area and the mesopore volume of the original SiO2, which is 10 times higher than the retention reported for other template methods used to produce high surface area SiC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the effects of hot spot formation during MW-assisted synthesis of Cf/SiC composites by reactive melt infiltration: Experimental simulations through high temperature treatments

  • Caccia, Mario
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Synthesis of SiC-based composites using microwave(MW)-assisted reactive infiltration is a promising way to obtain these materials at lower costs due to a reduction in processing time and energy consumption. Hot spots are likely to form during this process due to the different dielectric properties of the various phases and the exothermic nature of the reaction between Si and C. To study these effects Cf/SiC composites were subjected to high-temperature treatments (1800, 2000, 2200 °C) to simulate hot spots within the material. Microstructural changes were evaluated after the thermal treatments and thermo-mechanical properties were measured and correlated to the microstructural changes. Our results indicate that evaporation of silicon is the primary damaging mechanism, causing a decrease in the bending strength of the composite due to formation of porosity and a volume increase. These effects are countered by the densification of carbon phases that improve the intrinsic thermal properties of the material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New advanced SiC-based composite materials for use in highly oxidizing environments: Synthesis of SiC/IrSi3

  • Camarano, Antonio
  • Giuranno, Donatella
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Currently, MMCs with SiC as reinforcement emerge as ideal candidates for long-term stable devices withstanding high temperatures and harsh operating environments which are typical for many industrial sectors, such as energy, aerospace, electronics, catalysis, etc. However, the costly manufacture of such composites is the major restraint to make them marketable. In this paper, highly-dense, nearly-shaped SiC/IrSi3 composites effortless produced at T = 1250 °C under a vacuum by reactive melt infiltration of liquid Si-62 wt%Ir eutectic alloy into bimodal SiCp-C porous preforms, are presented. The replacement of unreacted detrimental Si by a tougher and less oxidizing intermetallic phase (IrSi3) was successfully obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tuning Activity and Selectivity in Catalyzed Reactions of Environmental and Industrial Importance with a High-Surface Area, Mesoporous Mo2C Catalyst

  • Ortega Trigueros, Adrián
  • Caccia, Mario
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Transition metal carbides such as Mo2C are promising catalysts for reactions of environmental and economic importance because they exhibit a similar electronic structure to nobel metals which makes them active in the absence of a metal phase. However, their potential is limited by their inherent non-porous (low surface area) nature. In this work, a high-surface area, mesoporous Mo2C was synthesized via a template liquid/solid reaction. Different reactant ratios and purification routes were explored to obtain only Mo2C with the desired textural properties (≈200 m2/g). The resulting mesoporous catalyst was tested in two different reactions [reverse water gas shift (RWGS) and hydrogenation of nitroarenes] and compared against a non-porous commercial Mo2C. The synthesized catalyst showed a 100% selectivity toward CO in the RWGS reaction at temperatures as low as 300 °C and achieved a 100% conversion in the hydrogenation of nitroarenes after 3 h of reaction, significantly outperforming the non-porous commercial catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis of carbon monoliths with a tailored hierarchical pore structure for selective CO2 capture

  • Zabiegaj, Dominika
  • Caccia, Mario
  • Casco, Mirian Elizabeth
  • Ravera, Francesca
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Carbon monolithic adsorbents exhibiting a hierarchical pore structure are produced via a synthesis route based on the stabilization of liquid foams followed by a carbonization step. The macro-microporous structure is achieved by the incorporation of microporous, biomass-derived activated carbon particles in the liquid foam enclosed by a cationic surfactant as stabilizer. This method yields crack-free monoliths (solid foams) with a compressive strength of the order of 20 kPa. The microstructure and the textural properties of the final solid foams have been investigated by means of Scanning Electron Microscopy (SEM) and gas adsorption. The behavior as selective CO2 adsorbents at 25 °C has been evaluated using breakthrough experiments under simulated post-combustion conditions (16% V/V CO2/N2), resulting in a selectivity factor of 13 over N2. The hierarchical pore structure of the monoliths allows a rapid transport of the gas mixture through the macropores with no appreciable pressure drop, retaining more than 90 % of the adsorption capacity (∼ 0.868 mmol/g) after several adsorption/desorption cycles. Moreover, the monolith has shown a CO2 uptake capacity of 2.62 mmol/g under static condition at 1 bar and 25 °C. This study provides guidelines for the design of carbon-based foams decorated with carbon particles, which have morphological and textural properties that can be carefully selected for any gas-selective capture application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reactive melt infiltration as synthesis route for enhanced SiC/CoSi2 composite materials for advanced armor systems

  • Caccia, Mario
  • Xiang, Chongchen
  • Narciso, Javier
  • Gupta, Nikhil
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Advanced ceramics such as silicon carbide (SiC) have shown an excellent performance under impact loading, and given their low density, they have attracted attention to be used in personal armor as well as in vehicles. Sintered SiC presents, nevertheless, an elevated cost which is a direct consequence of the severe temperature and pressure conditions required to sinter it. Reactive melt infiltration is a more cost-effective way to obtain SiC-based materials. It is a pressureless technique that requires much lower temperatures (1450–1600 °C) and provides extra near-net shape capabilities, thus reducing the processing cost of the final material. The main disadvantage of this technique is that the final material presents a variable content of unreacted Si in its microstructure (5–25 vol%). Due to its lower mechanical properties Si usually hinders the overall performance of the material. The replacement of the unreacted Si phase in SiC-based composites produced by reactive melt infiltration remains one of the biggest challenges that limits the applications of such materials. In this work, an alternative route is proposed, using Si-rich Si-Co alloys as infiltrants to replace the weaker Si phase with a tougher CoSi2 phase. The thermo-mechanical properties of the produced composites have been measured and correlated to its microstructure. The presence of CoSi2 showed up to 200% improvement in the impact performance of the composites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Key Parameters in the Manufacture of SiC-Based Composite Materials by Reactive Melt Infiltration

  • Caccia, Mario
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
The manufacture of SiC-based composites is quite widespread, and currently different methods are employed to produce them. The most efficient method, taking into account the cost/performance ratio, is reactive melt infiltration. It consists in infiltrating liquid silicon into a porous preform that must contain carbon, so that SiC is produced during infiltration. In the present work, the synthesis of two SiC-based composite materials with very different applications and microstructures has been studied and optimized. In both cases, materials have been obtained with suitable properties for the selected applications. One of the materials studied is silicon carbide particles/silicon (SiCp/Si) for protection systems such as armor jackets, and the other one is carbon fiber/silicon carbide (Cf/SiC) for use in braking systems. For the optimization, the dwell time and the atmosphere (Ar or primary vacuum) were used as variables. It has been found that in both preforms, the optimum conditions are 1 h dwell time and a vacuum atmosphere at 1450 °C. The effect of these parameters on microstructure and infiltration kinetics are discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New Generation of MOF-Monoliths Based on Metal Foams

  • Delgado-Marín, José Javier
  • Izan, Dennis P.
  • Molina Sabio, Miguel
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Herein, it has been developed a method to prepare metallic foams starting from Zamak5 (ZnAlCu alloy) with different pore sizes. The Zamak5 metallic foam is designed to serve as a support and metallic precursor of ZIF-8. In this way, composite materials MOF-metal can be prepared, these composites have a large number of application in energy exchange processe such as: adsorption or chemical reactions. Additionally, this method of sythesizing MOFs is environmentally friendly thanks to absence of solvents. Hanerssing the low melting point of the linker, the linker is infiltrated into the foam where the foam and the linker react to form the ZIF-8. In this way we have managed to transform part of the foam into ZIF-8 crystals that remain adhered to the foam. The foams have been characterized and modeled studying the mechanical and electrical properties, finding that both can be predected by various models. Among these, Ashby and Mortensen models for mechanical properties and Ashby and Percolation model for electrical properties stand.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

SiC-IrSi3 for High Oxidation Resistance

  • Camarano, Antonio
  • Giuranno, Donatella
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
SiC is a material with excellent mechanical and thermal properties but with a high production cost. Obtaining SiC by reactive infiltration is an attractive method with a much lower cost than the traditional sintering process. However, the reactive infiltration process presents a serious problem, which is the high residual silicon content, which decreases its applicability. The replacement of silicon with silicides is a widely used alternative. The present investigation shows the good mechanical properties of the SiC-IrSi3 composite material obtained by reactive infiltration of SiC-C preforms with Ir–Si alloys. The thermomechanical analysis shows a high compatibility of silicide with SiC. The presence of the silicide shows a substantial improvement against the oxidation of the SiC-Si composites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manufacture of Carbon Materials with High Nitrogen Content

  • Villalgordo-Hernández, David
  • Grau-Atienza, Aida
  • García-Marín, Antonio A.
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Grau-Atienza, Aida|||/items/c4516fa7-6035-4389-9725-5908c8fa92ae
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
Nowadays one of the biggest challenges for carbon materials is their use in CO2 capture and their use as electrocatalysts in the oxygen reduction reaction (ORR). In both cases, it is necessary to dope the carbon with nitrogen species. Conventional methods to prepare nitrogen doped carbons such as melamine carbonization or NH3 treatment generate nitrogen doped carbons with insufficient nitrogen content. In the present research, a series of activated carbons derived from MOFs (ZIF-8, ZIF-67) are presented. Activated carbons have been prepared in a single step, by pyrolysis of the MOF in an inert atmosphere, between 600 and 1000 °C. The carbons have a nitrogen content up to 20 at.% and a surface area up to 1000 m2/g. The presence of this nitrogen as pyridine or pyrrolic groups, and as quaternary nitrogen are responsible for the great adsorption capacity of CO2, especially the first two. The presence of Zn and Co generates very different carbonaceous structures. Zn generates a greater porosity development, which makes the doped carbons ideal for CO2 capture. Co generates more graphitized doped carbons, which make them suitable for their use in electrochemistry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing catalytic epoxide ring-opening selectivity using surface-modified Ti3C2Tx MXenes

  • Slot, Thierry K.
  • Natu, Varun
  • Ramos-Fernández, Enrique V.
  • Sepúlveda-Escribano, Antonio
  • Barsoum, Michel
  • Rothenberg, Gadi
  • Shiju, N. Raveendran
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
MXenes are a new family of two-dimensional carbides and/or nitrides. Their 2D surfaces are typically terminated by O, OH and/or F atoms. Here we show that Ti3C2Tx—the most studied compound of the MXene family—is a good acid catalyst, thanks to the surface acid functionalities. We demonstrate this by applying Ti3C2Tx in the epoxide ring-opening reaction of styrene oxide (SO) and its isomerization in the liquid phase. Modifying the MXene surface changes the catalytic activity and selectivity. By oxidizing the surface, we succeeded in controlling the type and number of acid sites and thereby improving the yield of the mono-alkylated product to >80%. Characterisation studies show that a thin oxide layer, which forms directly on the Ti3C2Tx surface, is essential for catalysing the SO ring-opening. We hypothesize that two kinds of acid sites are responsible for this catalysis: In the MXene, strong acid sites (both Lewis and Brønsted) catalyse both the ring-opening and the isomerization reactions, while in the Mxene–TiO2 composite weaker acid sites catalyse only the ring-opening reaction, increasing the selectivity to the mono-alkylated product.