Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Wind Tunnel Testing of Micro-Perforated Materials

  • Maury, Cédric
  • Bravo, Teresa
10 th Convention of the European Acoustics Association Turin, Italy • 11th – 15th September 2023 • Politecnico di Torino Forum Acusticum 2023 8 páginas, 11 figuras, 2 tablas, Micro-perforated liners can be of interest for the attenuation of the low-frequency noise in ducted geometries that can appear for instance due to the presence of a Turbulent Boundary Layer (TBL) excitation that contributes to the noise between 500 Hz and 2 kHz. Classical acoustic liners are locally-reacting devices constituted of perforates rigidlybacked by a honeycomb filled cavity. An alternative approach for reducing wall-friction in aero-acoustic applications is the use of facesheets with sub-millimetric diameter perforations. In this study, we perform a costefficient experimental characterization for comparing the performance of micro-perforated partitions with those of fibrous non-resonant absorbers for the attenuation of acoustic waves and flow-induced noise in a low-speed wind tunnel. Two types of excitations have been studied, a fullydeveloped TBL and a source-induced noise using flushmounted compression drivers. We have used a nosecone microphone system for the determination of velocity and intensity profiles above the micro-perforated and fibrous test sections. The results obtained showed that the sound pressure levels and intensity fluxes in the proximity of the wall-treatments present important modifications when considering micro-perforated panels at the cavity resonance., This work is part of the project TED2021-130103B- I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has been supported from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Acoustic Black Hole Effect in Ducted Geometries for Enhanced Dissipation at Low Frequencies

  • Bravo, Teresa
  • Maury, Cédric
10th Convention of the European Acoustics Association, Forum Acusticum 2023, Turin, Italy, 11th – 15th September 2023 8 páginas, 5 figuras., Improvement of acoustic absorption and transmission in the low frequency range when facing constraints on total volume and weight constitutes a constant challenge in the field of noise control. Emergence of acoustic metamaterials has allowed the development of compact sub-wavelength absorbers that can provide solutions in terms of the required wideband low-frequency sound dissipation. In a lined waveguide, the effective velocity of the incoming sound can be progressively reduced to zero leading to the Acoustic Black Hole (ABH) effect. In this work, this concept of sound trapping has been mostly explored for widely-opened ABH silencer for the reduction of the transmission properties without obstructing flow circulation. Attention has been paid to the attenuation of the acoustic backreflections that can be of interest for improving engine combustion efficiency for instance. Parametric studies are carried out to study the influence of the physical ABH factors on the acoustic performance. We have also performed a causality-constrained optimization to determine the minimum bandwidth-to-length ratio required for a fixed dissipation requirement. Results have been validated with experimental results., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)