Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From Micro-Perforates to Micro-Capillary Absorbers: Analysis of Their Broadband Absorption Performance through Modeling and Experiments

  • Maury, Cédric
  • Bravo, Teresa
A challenging issue is currently the design of non-fibrous ultra-thin acoustic absorbers that are able to provide broadband performance in demanding environments. The objective of this study is to compare using simulations and measurements the broadband absorption performance of highly porous micro-capillary plates (MCPs) to that of micro-perforated panels (MPPs) under normal incidence while considering unbacked or backed configurations. MCPs are unusual materials used for sound absorption with micron-sized channels and a high perforation ratio. Impedance-based modeling and Kundt tube experiments show that MCPs with suitable channel diameters have a pure constant resistance that outperforms the acoustic efficiency of MPP absorbers. Unbacked MCPs exhibit a controllable amount of high absorption that can exceed 0.8 over more than five octaves starting from 80 Hz, thereby achieving a highly sub-wavelength absorber. MCPs still provide broadband high absorption when backed by a rigid cavity. Their bandwidth-to-thickness ratio increases toward its causal limit when the cavity depth decreases. A parallel MCP resonant absorber partly backed by closed and open cavities is proposed. Such MCP-based absorbers could serve as short anechoic terminations for the characterization of acoustic materials at low frequencies., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université-A*MIDEX (AMX-19-IET-010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments

  • Bravo, Teresa
  • Maury, Cédric
24 páginas, 17 figuras, 1 tabla, Wideband reduction of both sound reflection and transmission using compact non-intrusive liners remains a challenging issue for duct noise control applications. This work focuses on the acoustical performance limitations of cylindrical silencers made up of annular ring resonators with axial gradient of their cavity depths. It is shown from theoretical, numerical and experimental studies that a sub-wavelength silencer with optimized acoustic black hole (ABH) properties can be designed through which incident sound waves are retarded and fully dissipated within the activated resonant cavities. Such ABH-type silencer requires a suitable interplay between the wall impedance axial variations and the visco-thermal losses within the cavities. Key parameters that influence this balance are the axial growth of cavity depths and the wall porosity. A causal-based criterion has been proposed that maximizes the total integrated dissipated power, thereby leading to the optimal value of the wall porosity and to the ultimate bandwidth-to-length ratio that can be achieved by an ABH-type silencer given a target dissipation value. A space-frequency region has been numerically and experimentally identified over which the ABH effect is prominent. The causal-based criterion has been extended to account for the low-frequency ultimate performance of ABH silencers with coiled cavities and for the effects of a low-speed grazing flow., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-19-IET-010), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vibrational Effects on the Acoustic Performance of Multi-Layered Micro-Perforated Metamaterials

  • Maury, Cédric
  • Bravo, Teresa
Broadband noise reduction over the low–mid frequency range in the building and transportation sectors requires compact lightweight sound absorbers of a typical subwavelength size. The use of multi-layered, closely spaced (micro-)perforated membranes or panels, if suitably optimized, contributes to these objectives. However, their elasticity or modal behaviors often impede the final acoustical performance of the partition. The objective of this study is to obtain insights into the vibrational effects induced by elastic limp membranes or panel volumetric modes on the optimized sound absorption properties of acoustic fishnets and functionally graded partitions (FGP). The cost-efficient global optimization of the partitions’ frequency-averaged dissipation is achieved using the simulated annealing optimization method, while vibrational effects are included through an impedance translation method. A critical coupling analysis reveals how the membranes or panel vibrations redistribute the locations of the Hole-Cavity resonances, as well as their cross-coupling with the panels’ first volumetric mode. It is found that elastic limp micro-perforated membranes broaden the pass-band of acoustic fishnets, while smoothing out the dissipation ripples over the FGP optimization bandwidth. Moreover, the resonance frequency of the first panels mode sets an upper limit to the broadband optimization of FGPs, up to which a high dissipation, high absorption, and low transmission can be achieved., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université—A*MIDEX (AMX-19-IET-010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Wind Tunnel Testing of Micro-Perforated Materials

  • Maury, Cédric
  • Bravo, Teresa
10 th Convention of the European Acoustics Association Turin, Italy • 11th – 15th September 2023 • Politecnico di Torino Forum Acusticum 2023 8 páginas, 11 figuras, 2 tablas, Micro-perforated liners can be of interest for the attenuation of the low-frequency noise in ducted geometries that can appear for instance due to the presence of a Turbulent Boundary Layer (TBL) excitation that contributes to the noise between 500 Hz and 2 kHz. Classical acoustic liners are locally-reacting devices constituted of perforates rigidlybacked by a honeycomb filled cavity. An alternative approach for reducing wall-friction in aero-acoustic applications is the use of facesheets with sub-millimetric diameter perforations. In this study, we perform a costefficient experimental characterization for comparing the performance of micro-perforated partitions with those of fibrous non-resonant absorbers for the attenuation of acoustic waves and flow-induced noise in a low-speed wind tunnel. Two types of excitations have been studied, a fullydeveloped TBL and a source-induced noise using flushmounted compression drivers. We have used a nosecone microphone system for the determination of velocity and intensity profiles above the micro-perforated and fibrous test sections. The results obtained showed that the sound pressure levels and intensity fluxes in the proximity of the wall-treatments present important modifications when considering micro-perforated panels at the cavity resonance., This work is part of the project TED2021-130103B- I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has been supported from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-Duct Broadband Dissipation Using Micro-Capillary Plates

  • Bravo, Teresa
  • Maury, Cédric
54º Congreso de Acústica / Tecniacústica 2023 18-20 Octubre 2023, Cuenca 7 páginas, 7 figuras, 1 tabla, Attenuation of low frequency noise constitutes a long-stating problem in the field of noise control. The use of Micro-Perforated Panels has been proved to be efficient if the primary noise source spectrum is confined in a narrow frequency band. To get rid of the limitations due to the backing cavity depth, unbacked configurations have also been considered. They are able to supply good attenuation results if the size of the hole diameters is reduced and the perforation ratio is increased. These devices are denoted Micro-Capillary Plates. These ultra-perforated membranes consist of highly porous panels made up of leaded glass, of high porosity with millions of micro-channels per centimeter square, the holes or square channel dimensions varying between 5µm and 50µm. They are 1-2 millimeters thick and can be produced in various shapes using drawn tubes of fused, chemically etched fibers, working on both backed or unbacked configurations. These characteristics provide them with exceptional acoustical properties compared to other classical absorbers or MPPs. If rigidly backed by an air cavity of 24 mm, a MCP device provides a half-bandwidth absorption over 12 octaves whereas a MPP device works only over one-two octaves. Their performance will be examined in ducted propagation conditions., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellenced'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Acoustic Black Hole Effect in Ducted Geometries for Enhanced Dissipation at Low Frequencies

  • Bravo, Teresa
  • Maury, Cédric
10th Convention of the European Acoustics Association, Forum Acusticum 2023, Turin, Italy, 11th – 15th September 2023 8 páginas, 5 figuras., Improvement of acoustic absorption and transmission in the low frequency range when facing constraints on total volume and weight constitutes a constant challenge in the field of noise control. Emergence of acoustic metamaterials has allowed the development of compact sub-wavelength absorbers that can provide solutions in terms of the required wideband low-frequency sound dissipation. In a lined waveguide, the effective velocity of the incoming sound can be progressively reduced to zero leading to the Acoustic Black Hole (ABH) effect. In this work, this concept of sound trapping has been mostly explored for widely-opened ABH silencer for the reduction of the transmission properties without obstructing flow circulation. Attention has been paid to the attenuation of the acoustic backreflections that can be of interest for improving engine combustion efficiency for instance. Parametric studies are carried out to study the influence of the physical ABH factors on the acoustic performance. We have also performed a causality-constrained optimization to determine the minimum bandwidth-to-length ratio required for a fixed dissipation requirement. Results have been validated with experimental results., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Causal-based optimization of micro-perforated treatments

  • Maury, Cédric
  • Bravo, Teresa
INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise23, Chiba, Japan 20-23 august 2023 12 páginas, 10 figuras., Enhancing the low-frequency performance of compact acoustical micro-perforated treatments is a challenging task that requires global optimization studies performed on numerical or theoretical models. However, for a given geometry, there always exists a lower frequency bound below which the treatment will exhibit poor dissipation performance. In this study, it is shown how this lower frequency bound is related to the total integrated dissipated power through a causal-based criterion. Examples are shown for the cases of a rigidly-backed micro-perforate under plane wave incidence and for a locally-reacting micro-perforated resonant silencer mounted in a duct. Such criterion provides the ultimate bandwidth-to-length ratio that can be achieved by the acoustical treatments for a given target dissipation value. One can also deduce the optimal values of individual parameters such as the hole diameters or the wall porosity that leads to a suitable balance between leakage and dissipation effects. The causal-based optimized treatments are validated against simulated or measured impedance tube data., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow

  • Bravo, Teresa
  • Maury, Cédric
22 páginas, 14 figuras., Rainbow trapping filters (RTFs) have been so far investigated to achieve broadband unit sound absorption in closed-end duct terminations. However, opened RTFs have been scarcely explored to realize broadband low-frequency dissipation of sound waves while being traversed by a low speed flow. To bridge the gap, we propose a RTF composed of coiled cavities whose inner radius follows a flow-compliant converging profile, referred to as a converging coiled CCRTF silencer. An effective medium approach and the transfer matrix method (TMM) showed the ability of such devices to produce slow sound, impedance matching and minute sound reflection and trans- mission over a wide bandwidth, confirmed by finite element simulations and scattering matrix measurements without flow. A causal analysis revealed that a large density of wall resonators enhances the silencer performance while its bandwidth is driven by the coiling factor, convergent contraction ratio and cavities axial growth. Particle swarm optimization of these parameters led to a sub-wavelength CCRTF silencer with near-unit dissipation over 3.5 octaves from 200 Hz upwards. Extended TMM and aeroacoustic measurements showed resilience of the CCRTF per- formance under upstream or downstream propagation conditions for outlet Mach numbers below 0.16, thereby opening up applications like the design of silent convergent nozzles., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and the project PID2022-139414OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand, M. Amielh and D. Mazzoni for their technical and experimental support during the aero-acoustic testings at IRPHE CNRS Laboratory., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Acoustic Black Hole silencers for broadband dissipation in ducted geometries

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
12 páginas, 8 figuras., Presentación., The design of novel absorbers avoiding the use of porous or fibrous materials for ventilation and air-conditioning systems constitutes a challenging issue. Recently, the development of metamaterials has provided new noise control perspectives for this problem. Traditional Acoustic Black Holes (ABHs) have been derived with close-ended configurations to achieve broadband absorption. These solutions are suitable as anechoic termination but they cannot be used as silencer as they require a mean flow going through the axis of the acoustic treatment. In this study different configurations of opened ABHs will be considered. Nominal ABHs build on straight cavities of increasing depth along the axial direction. To extend the bandwidth of acoustic performance towards the low frequencies, two different types of ABH silencers will be studied. Cavities with coiled geometries will be considered as a first instance, while the entrance of these cavities will be covered by micro-perforated consequently. The transfer matrix formulation will be adapted to these configurations and used to provide the ABH acoustical performance in terms of reflection and transmission of the silencer to find out the best configuration. These results will be validated against a Finite Element method and experiments will be carried out for the nominal configuration., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in-vestment plan, as part of the Initiative d'Excellenced'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Broadband performance of micro-perforated acoustic black holes in ducts

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
  • Ali, Fawad
XIII Congresso Ibérico de Acústica, 55.º Congreso Español de Acústica. TECNIACÚSTICA 2024 Del 11 al 13 de septiembre de 2024, Faro, Portugal. 12 páginas, 7 figuras., [ES] El diseño de silenciadores compactos instalados en conductos para la atenuación de banda ancha en el margen de las bajas frecuencias es importante en sistemas de aire acondicionado, revestimientos de ventiladores o silenciadores de vehículos. Los agujeros negros acústicos (ABH) abiertos son una solución adecuada que atrapan y disipan ondas sonoras incidentes en un amplio margen de frecuencias al actuar simultáneamente sobre la transmisión y la reflexión sin impedir el flujo de aire. Inspirados en el concepto de agujeros negros de vibraciones, los ABH en conductos están formados por una distribución en serie de cavidades con espesores graduados que proporcionan un sonido retardado y una adaptación de impedancia. En este trabajo, se propone examinar la influencia de las interfaces microperforadas entre el conducto y las entradas a la cavidad para el rendimiento acústico del ABH. A partir de la formulación de la matriz de transferencia se demuestra que los microperforados amplían significativamente el rango de valores de disipación elevados en las bajas frecuencias. Los resultados obtenidos se han validado numéricamente con elementos finitos y experimentalmente en un banco de pruebas aeroacústicas con baja velocidad de flujo., [EN]The design of compact duct silencers with broadband low-frequency attenuation performance is of importance for large diameters air conditioning systems, short turbofan liners or the exhaust mufflers of vehicles. Fully-opened acoustic black holes (ABH) in ducts are a suitable solution to trap and dissipate incident sound waves over a broad bandwidth. They can simultaneously stop the sound transmission and the back-reflections without blocking the air flow. Inspired by the concept of vibrational black holes, ducted ABHs are a serial distribution of graded cavity depths providing slow sound and impedance matching. In this work, it is proposed to examine the influence of micro-perforated interfaces between the duct and the cavity mouths on the ABH acoustical performance. It is shown from transfer matrix formulation that micro-perforates significantly extend the range of high dissipation values towards low-frequencies. The performance results are validated against finite element method and experiments carried out in a low-speed aeroacoustic test rig., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand for their technical and experimental support during the wind-tunnel testing at IRPHE Laboratory, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ANALYTICAL PREDICTION AND IN-SITU EXPERIMENTAL CHARACTERIZATION OF ANISOTROPIC FIBROUS MATERIALS

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzo, Daniel
  • Amielh, Muriel
XIII Congresso Ibérico de Acústica, 55.º Congreso Español de Acústica. TECNIACÚSTICA 2024 Del 11 al 13 de septiembre de 2024, Faro, Portugal. 12 páginas, 4 figuras, [ES] El diseño de materiales acústicos alternativos para problemas de control de ruido ambiental requiere una caracterización experimental que debe realizarse considerando las condiciones in situ para una estimación precisa de sus propiedades absorbentes. En este trabajo estamos interesados en el estudio de materiales fibrosos anisotrópicos como una alternativa a los materiales clásicos que no pueden lograr las reducciones de ruido específicas recomendadas por las organizaciones mundiales de la salud. Sus propiedades, direccionalmente dependientes, proporcionan más grados de libertad para la optimización y adecuación a diferentes problemas. Se predicen utilizando una formulación analítica que tiene en cuenta tanto la anisotropía como la dependencia de la frecuencia del módulo complejo de densidad y compresibilidad y requiere la solución de una ecuación trascendental. La verificación de los resultados se ha realizado de forma experimental con una sonda de presión-velocidad in situ que proporciona los coeficientes de absorción y reflexión en función del diámetro de las fibras. También se han obtenido resultados cubriendo el material fibroso con un panel microperforado, [EN] The design of alternative acoustic materials for environmental noise control problems requires an experimental characterization that has to be done considering in-situ conditions for accurate estimation of their absorbing properties. In this work we are interested in the study of anisotropic fibrous materials as an alternative to classical materials that cannot achieve the targeted noise reductions recommended by world health organizations. Their properties, directionally dependent, provide more degrees of freedom for optimization and adequacy to different problems. They are predicted using an analytical formulation that accounts for both anisotropy and frequency dependence of the complex density and compressibility module. It requires the solution of a transcendental equation. Verification of the results has been carried out experimentally with an in-situ pressure-velocity probe that provides the absorption and reflection coefficients as a function of the fibers diameter. Results have also been obtained when shielding the fibrous material by a micro-perforated panel., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand for their technical and experimental support during the wind-tunnel testing at IRPHE Laboratory
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The influence of vibrations on the optimal performance of micro-perforated acoustic metamaterials

  • Maury, Cédric
  • Bravo, Teresa
30thInternational Congress on Sound and Vibration. ICSV'30 Del 8 al 11 de julio de 2024, Amsterdam, Países Bajos. 8 páginas, 7 figuras., A key challenge in the building and transportation area is to enhance the acoustic absorption and insulation of porous wall-treatments over the low-mid frequency range while keeping sub-wavelength lightweight partitions. An approach is to design multi-layered thin micro-perforates with optimized constitutive parameters. However, the desired acoustic performance of the partition may often be hindered by the elasticity or the modal behavior of the thin panels. This study examines the effect of the vibrations on the sound absorption, dissipation and transmission properties of two-types of acoustic metamaterials: an acoustic fishnet made up of identical micro-perforated panels (MPP) separated by millimetric air gaps and a functionally-graded partition (FGP) composed of different MPPs with decreasing values of the holes radius across the partition. The acoustic fishnet exhibits a band gap pattern while the FGP works on impedance matching andvisco-thermal dissipation through the holes as the incident wave enters the partition. Global optimization of the total power dissipated through these materials has been achieved from simulated annealing algorithm. The vibrational effects have been accounted for in an impedance translation formulation. It is found that elasticity effects broaden the first stop-band of the acoustic fishnet while lowering the dissipation peak values. They also bring added resistance to the FGP Hole-Cavity resonances that tend to merge over an extended bandwidth. The panel volumetric modes increase the absorption peaks of the acoustic fishnet if they fall just above the stop-band cut-off frequency. They also set an upper limit to the broadband properties of FGPs up to which a high dissipation, high absorption, and low transmission can be achieved. Critical coupling analysis shows how the Hole-Cavity resonances are redistributed due to coupling with the panel vibrations. It provides the amount of damping required for these resonances to achieve unit dissipation value., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in- vestment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22- RE-AB-157)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Elasticity and modal effects on the optimal performance of micro-perforated multi-layered absorbers

  • Maury, Cédric
  • Bravo, Teresa
53rd International Congress and Exposition on Noise Control Engineering. Inter-Noise 24. Del 25 al 29 de agosto de 2024, Nantes, Francia. 11 páginas, 8 figuras., Multi-layered wall-treatments with thin lightweight micro-perforated panels offer a potential solution to achieve broadband noise absorption while complying with mass saving and compactness. This study examines how vibrational effects, often neglected, may impede the wideband acoustical performance of such partitions, made up of a distribution of either periodic or graded micro-perforated membranes or panels. The impedance translation method and a scattering matrix analysis have been implemented. It is found that the elasticity behavior of thin micro-perforated membranes has a beneficial effect on the acoustical efficiency of the partitions. The contributions of the individual acoustical resonances tend to merge if the elasticity effects are accounted for. If the partition is optimized, near-constant high absorption and low transmission values are obtained over a wide frequency range. A more robust design involves partitions made up of micro-perforated panels. It was observed that the first volumetric volumetric mode of the panels degrades the absorption properties of the partition. It cross-coupless with the acoustical resonances and redistributes their spectral locations. This structural resonance setss an upper frequency bound, below which the partition can achieves a high broadband performance. It should be accounted for when setting the frequency limits of the total dissipation to be optimized., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ATTENUATION OF LOW FREQUENCIES FOR DUCTED SYS-TEMS BASED ON THE ACOUSTIC BLACK HOLE TECHNIQUE

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
30th International Congress on Sound and Vibration, 8 - 11 july, 2024, Amsterdam. 8 páginas, 5 figuras., The Acoustic Black Hole (ABH) is a new technique that was proposed for passive vibration control but has been recently extended for broadband noise control in ducted geometries. For instance, in areas such as building and transportation industries, the control of low-frequency noise propagating in exhaust or air-conditioning waveguides constitutes an important issue and a very challenging problem. Although many studies have presented closed ABH geometries, the used of open-ended ABHs is compulsory in duct systems where a mean axial flow is present. In this case, the concept of sound trapping involves minimization of both sound reflection and transmission inside the retarding structures. This work is focused on the optimal determination of the ABH physical constituting parameters that mostly influence the metamuffler performance. The requirements on minimal volume impose a constraint for the total dissipation that has to be considered regarding low-frequency broadband operation and manufacturing constraints. An analytical formulation will be presented in terms of the Transfer Matrix Method to model a widely-opened silencer composed of a finite number of sidebranch cavities with an axial variation of their depth according to an exponential law. These cavities are separated by rigid rings of constant thickness. Assuming plane wave propagation along the main duct and within the annular cavities, visco-thermal effects are considered to calculate the power dissipated by the ABH. Influence of several parameters is studied considering the optimal axial rate of cavity depth variation, the wall porosity and the ratio between the total silencer length and the duct radius. The simulated optimal results are verified against a set of measurements performed in a standing wave tube where the ABH is inserted. A good agreement is found between both values that validates the proposed metamuffler with near-unit dissipation over its efficiency broad bandwidth., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in- vestment plan, as part of the Initiative d'Excellenced'Aix-Marseille Université - A*MIDEX (AMX-22- RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825"

  • Bravo, Teresa
  • Maury, Cédric
[Description of methods used for collection/generation of data] The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a standing wave tube test rig onto which was mounted the silencer. The measurement method uses four microphones and two-sources to estimate, in plane wave regime, the scattering matrix of the test partition from which the reflected, transmitted and dissipated powers are calculated. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825, This dataset corresponds to the figures included in the article: Bravo, T., Maury, C. Broadband sound attenuation and absorption by duct silencers based on the acoustic black hole effect: Simulations and experiments. Journal of Sound and Vibration 561, 117825 (2023). http://doi.org/10.1016/j.jsv.2023.117825, This work has been funded by the project TED2021-130103B-I00, MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-19-IET-010), FIG1.tiff, FIG2.csv, FIG3.csv, FIG4.csv, FIG5.csv, FIG6.csv, FIG7.csv, FIG8.csv, FIG9.tiff, FIG10.csv, FIG11.tiff, FIG12.csv, FIG13.csv, FIG14.csv, FIG15.csv, FIG16.csv, FIG17.csv,README_DATA_JSV2023.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524"

  • Bravo, Teresa
  • Maury, Cédric
The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a aero-acoustic test bench. The metasilencer has been located between two rigid duct sections, 1m long, with outlet cross-sectional area 0.075 m x 0.075 m. The two-source and eight-microphone method has been used to determine the scattering matrix of the silencer in the general case of grazing flow. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524, This dataset corresponds to the figures included in the article: "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524", This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and the project PID2022-139414OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and by"ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157)., FIG1.tiff, FIG2.csv, FIG3.csv, FIG4.csv, FIG5.csv, FIG6.csv, FIG7.csv, FIG8.csv, FIG9.csv, FIG10.csv, FIG11.tiff, FIG12.csv, FIG13.tiff, FIG14a.csv,FIG14b.csv,FIG14c.csv,FIGB1.csv, Peer reviewed