Pasar al contenido principal

METAMATERIALES AEROACUSTICOS PARA SISTEMAS DE TRANSPORTE MAS SILENCIOSOS Y ENERGETICAMENTE EFICIENTES

PID2022-139414OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acoustic Pressure Amplification through In-Duct Sonic Black Holes

  • Maury, Cédric
  • Bravo, Teresa
  • Amielh, Muriel
  • Mazzoni, Daniel
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Acoustic detection of machinery defaults from in-duct measurements is of practical importance in many areas, such as the health assessment of turbines in ventilation systems or engine testing in the surface and air transport sectors. This approach is, however, impeded by the low signal-to-noise ratio (SNR) observed in such environments. In this study, it is proposed to exploit the slow sound effect of Sonic Black Hole (SBH) ducted silencers to enhance the sensing of incident pulse acoustic signals with low SNR. It is found from transfer matrix and finite element modelling that fully opened SBH silencers with perforated skin interfaces are able to substantially enhance an incident pulse amplitude while channeling an air flow. We demonstrate that the graded depths of the SBH cavities provide rainbow spectral decomposition and amplification of the incident pulse frequency components, provided that impedance matching, slow sound, and critically coupled conditions are met. In-duct experiments showed the ability of a 3D printed SBH silencer to simultaneously enhance acoustic sensing and fully trap the pulse spectral components in the SBH cavities in the presence of a low-speed flow. This study opens up new avenues for the development of dual-purpose silencers designed for acoustic monitoring and noise control in duct systems without obstructing the air flow., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université-A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow

  • Bravo, Teresa
  • Maury, Cédric
22 páginas, 14 figuras., Rainbow trapping filters (RTFs) have been so far investigated to achieve broadband unit sound absorption in closed-end duct terminations. However, opened RTFs have been scarcely explored to realize broadband low-frequency dissipation of sound waves while being traversed by a low speed flow. To bridge the gap, we propose a RTF composed of coiled cavities whose inner radius follows a flow-compliant converging profile, referred to as a converging coiled CCRTF silencer. An effective medium approach and the transfer matrix method (TMM) showed the ability of such devices to produce slow sound, impedance matching and minute sound reflection and trans- mission over a wide bandwidth, confirmed by finite element simulations and scattering matrix measurements without flow. A causal analysis revealed that a large density of wall resonators enhances the silencer performance while its bandwidth is driven by the coiling factor, convergent contraction ratio and cavities axial growth. Particle swarm optimization of these parameters led to a sub-wavelength CCRTF silencer with near-unit dissipation over 3.5 octaves from 200 Hz upwards. Extended TMM and aeroacoustic measurements showed resilience of the CCRTF per- formance under upstream or downstream propagation conditions for outlet Mach numbers below 0.16, thereby opening up applications like the design of silent convergent nozzles., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and the project PID2022-139414OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand, M. Amielh and D. Mazzoni for their technical and experimental support during the aero-acoustic testings at IRPHE CNRS Laboratory., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Acoustic Black Hole silencers for broadband dissipation in ducted geometries

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
12 páginas, 8 figuras., Presentación., The design of novel absorbers avoiding the use of porous or fibrous materials for ventilation and air-conditioning systems constitutes a challenging issue. Recently, the development of metamaterials has provided new noise control perspectives for this problem. Traditional Acoustic Black Holes (ABHs) have been derived with close-ended configurations to achieve broadband absorption. These solutions are suitable as anechoic termination but they cannot be used as silencer as they require a mean flow going through the axis of the acoustic treatment. In this study different configurations of opened ABHs will be considered. Nominal ABHs build on straight cavities of increasing depth along the axial direction. To extend the bandwidth of acoustic performance towards the low frequencies, two different types of ABH silencers will be studied. Cavities with coiled geometries will be considered as a first instance, while the entrance of these cavities will be covered by micro-perforated consequently. The transfer matrix formulation will be adapted to these configurations and used to provide the ABH acoustical performance in terms of reflection and transmission of the silencer to find out the best configuration. These results will be validated against a Finite Element method and experiments will be carried out for the nominal configuration., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in-vestment plan, as part of the Initiative d'Excellenced'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Broadband performance of micro-perforated acoustic black holes in ducts

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
  • Ali, Fawad
XIII Congresso Ibérico de Acústica, 55.º Congreso Español de Acústica. TECNIACÚSTICA 2024 Del 11 al 13 de septiembre de 2024, Faro, Portugal. 12 páginas, 7 figuras., [ES] El diseño de silenciadores compactos instalados en conductos para la atenuación de banda ancha en el margen de las bajas frecuencias es importante en sistemas de aire acondicionado, revestimientos de ventiladores o silenciadores de vehículos. Los agujeros negros acústicos (ABH) abiertos son una solución adecuada que atrapan y disipan ondas sonoras incidentes en un amplio margen de frecuencias al actuar simultáneamente sobre la transmisión y la reflexión sin impedir el flujo de aire. Inspirados en el concepto de agujeros negros de vibraciones, los ABH en conductos están formados por una distribución en serie de cavidades con espesores graduados que proporcionan un sonido retardado y una adaptación de impedancia. En este trabajo, se propone examinar la influencia de las interfaces microperforadas entre el conducto y las entradas a la cavidad para el rendimiento acústico del ABH. A partir de la formulación de la matriz de transferencia se demuestra que los microperforados amplían significativamente el rango de valores de disipación elevados en las bajas frecuencias. Los resultados obtenidos se han validado numéricamente con elementos finitos y experimentalmente en un banco de pruebas aeroacústicas con baja velocidad de flujo., [EN]The design of compact duct silencers with broadband low-frequency attenuation performance is of importance for large diameters air conditioning systems, short turbofan liners or the exhaust mufflers of vehicles. Fully-opened acoustic black holes (ABH) in ducts are a suitable solution to trap and dissipate incident sound waves over a broad bandwidth. They can simultaneously stop the sound transmission and the back-reflections without blocking the air flow. Inspired by the concept of vibrational black holes, ducted ABHs are a serial distribution of graded cavity depths providing slow sound and impedance matching. In this work, it is proposed to examine the influence of micro-perforated interfaces between the duct and the cavity mouths on the ABH acoustical performance. It is shown from transfer matrix formulation that micro-perforates significantly extend the range of high dissipation values towards low-frequencies. The performance results are validated against finite element method and experiments carried out in a low-speed aeroacoustic test rig., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand for their technical and experimental support during the wind-tunnel testing at IRPHE Laboratory, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ANALYTICAL PREDICTION AND IN-SITU EXPERIMENTAL CHARACTERIZATION OF ANISOTROPIC FIBROUS MATERIALS

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzo, Daniel
  • Amielh, Muriel
XIII Congresso Ibérico de Acústica, 55.º Congreso Español de Acústica. TECNIACÚSTICA 2024 Del 11 al 13 de septiembre de 2024, Faro, Portugal. 12 páginas, 4 figuras, [ES] El diseño de materiales acústicos alternativos para problemas de control de ruido ambiental requiere una caracterización experimental que debe realizarse considerando las condiciones in situ para una estimación precisa de sus propiedades absorbentes. En este trabajo estamos interesados en el estudio de materiales fibrosos anisotrópicos como una alternativa a los materiales clásicos que no pueden lograr las reducciones de ruido específicas recomendadas por las organizaciones mundiales de la salud. Sus propiedades, direccionalmente dependientes, proporcionan más grados de libertad para la optimización y adecuación a diferentes problemas. Se predicen utilizando una formulación analítica que tiene en cuenta tanto la anisotropía como la dependencia de la frecuencia del módulo complejo de densidad y compresibilidad y requiere la solución de una ecuación trascendental. La verificación de los resultados se ha realizado de forma experimental con una sonda de presión-velocidad in situ que proporciona los coeficientes de absorción y reflexión en función del diámetro de las fibras. También se han obtenido resultados cubriendo el material fibroso con un panel microperforado, [EN] The design of alternative acoustic materials for environmental noise control problems requires an experimental characterization that has to be done considering in-situ conditions for accurate estimation of their absorbing properties. In this work we are interested in the study of anisotropic fibrous materials as an alternative to classical materials that cannot achieve the targeted noise reductions recommended by world health organizations. Their properties, directionally dependent, provide more degrees of freedom for optimization and adequacy to different problems. They are predicted using an analytical formulation that accounts for both anisotropy and frequency dependence of the complex density and compressibility module. It requires the solution of a transcendental equation. Verification of the results has been carried out experimentally with an in-situ pressure-velocity probe that provides the absorption and reflection coefficients as a function of the fibers diameter. Results have also been obtained when shielding the fibrous material by a micro-perforated panel., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand for their technical and experimental support during the wind-tunnel testing at IRPHE Laboratory
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The influence of vibrations on the optimal performance of micro-perforated acoustic metamaterials

  • Maury, Cédric
  • Bravo, Teresa
30thInternational Congress on Sound and Vibration. ICSV'30 Del 8 al 11 de julio de 2024, Amsterdam, Países Bajos. 8 páginas, 7 figuras., A key challenge in the building and transportation area is to enhance the acoustic absorption and insulation of porous wall-treatments over the low-mid frequency range while keeping sub-wavelength lightweight partitions. An approach is to design multi-layered thin micro-perforates with optimized constitutive parameters. However, the desired acoustic performance of the partition may often be hindered by the elasticity or the modal behavior of the thin panels. This study examines the effect of the vibrations on the sound absorption, dissipation and transmission properties of two-types of acoustic metamaterials: an acoustic fishnet made up of identical micro-perforated panels (MPP) separated by millimetric air gaps and a functionally-graded partition (FGP) composed of different MPPs with decreasing values of the holes radius across the partition. The acoustic fishnet exhibits a band gap pattern while the FGP works on impedance matching andvisco-thermal dissipation through the holes as the incident wave enters the partition. Global optimization of the total power dissipated through these materials has been achieved from simulated annealing algorithm. The vibrational effects have been accounted for in an impedance translation formulation. It is found that elasticity effects broaden the first stop-band of the acoustic fishnet while lowering the dissipation peak values. They also bring added resistance to the FGP Hole-Cavity resonances that tend to merge over an extended bandwidth. The panel volumetric modes increase the absorption peaks of the acoustic fishnet if they fall just above the stop-band cut-off frequency. They also set an upper limit to the broadband properties of FGPs up to which a high dissipation, high absorption, and low transmission can be achieved. Critical coupling analysis shows how the Hole-Cavity resonances are redistributed due to coupling with the panel vibrations. It provides the amount of damping required for these resonances to achieve unit dissipation value., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in- vestment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22- RE-AB-157)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Elasticity and modal effects on the optimal performance of micro-perforated multi-layered absorbers

  • Maury, Cédric
  • Bravo, Teresa
53rd International Congress and Exposition on Noise Control Engineering. Inter-Noise 24. Del 25 al 29 de agosto de 2024, Nantes, Francia. 11 páginas, 8 figuras., Multi-layered wall-treatments with thin lightweight micro-perforated panels offer a potential solution to achieve broadband noise absorption while complying with mass saving and compactness. This study examines how vibrational effects, often neglected, may impede the wideband acoustical performance of such partitions, made up of a distribution of either periodic or graded micro-perforated membranes or panels. The impedance translation method and a scattering matrix analysis have been implemented. It is found that the elasticity behavior of thin micro-perforated membranes has a beneficial effect on the acoustical efficiency of the partitions. The contributions of the individual acoustical resonances tend to merge if the elasticity effects are accounted for. If the partition is optimized, near-constant high absorption and low transmission values are obtained over a wide frequency range. A more robust design involves partitions made up of micro-perforated panels. It was observed that the first volumetric volumetric mode of the panels degrades the absorption properties of the partition. It cross-coupless with the acoustical resonances and redistributes their spectral locations. This structural resonance setss an upper frequency bound, below which the partition can achieves a high broadband performance. It should be accounted for when setting the frequency limits of the total dissipation to be optimized., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ATTENUATION OF LOW FREQUENCIES FOR DUCTED SYS-TEMS BASED ON THE ACOUSTIC BLACK HOLE TECHNIQUE

  • Bravo, Teresa
  • Maury, Cédric
  • Mazzoni, Daniel
  • Amielh, Muriel
30th International Congress on Sound and Vibration, 8 - 11 july, 2024, Amsterdam. 8 páginas, 5 figuras., The Acoustic Black Hole (ABH) is a new technique that was proposed for passive vibration control but has been recently extended for broadband noise control in ducted geometries. For instance, in areas such as building and transportation industries, the control of low-frequency noise propagating in exhaust or air-conditioning waveguides constitutes an important issue and a very challenging problem. Although many studies have presented closed ABH geometries, the used of open-ended ABHs is compulsory in duct systems where a mean axial flow is present. In this case, the concept of sound trapping involves minimization of both sound reflection and transmission inside the retarding structures. This work is focused on the optimal determination of the ABH physical constituting parameters that mostly influence the metamuffler performance. The requirements on minimal volume impose a constraint for the total dissipation that has to be considered regarding low-frequency broadband operation and manufacturing constraints. An analytical formulation will be presented in terms of the Transfer Matrix Method to model a widely-opened silencer composed of a finite number of sidebranch cavities with an axial variation of their depth according to an exponential law. These cavities are separated by rigid rings of constant thickness. Assuming plane wave propagation along the main duct and within the annular cavities, visco-thermal effects are considered to calculate the power dissipated by the ABH. Influence of several parameters is studied considering the optimal axial rate of cavity depth variation, the wall porosity and the ratio between the total silencer length and the duct radius. The simulated optimal results are verified against a set of measurements performed in a standing wave tube where the ABH is inserted. A good agreement is found between both values that validates the proposed metamuffler with near-unit dissipation over its efficiency broad bandwidth., This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR, and project PID2022-139414OB-I00 funded by MCIN/ AEI /10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 in- vestment plan, as part of the Initiative d'Excellenced'Aix-Marseille Université - A*MIDEX (AMX-22- RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Model-Based and Data-Driven Global Optimization of Rainbow-Trapping Mufflers

  • Maury, Cédric
  • Bravo, Teresa
  • Mazzoni, Daniel
  • Amielh, Muriel
  • Reinoso, Antonio J.
This article belongs to the Section Environmental Technology., Compared to rigidly-backed absorbers, the selection of appropriate optimization techniques for the optimal design of broadband acoustic mufflers remains under-investigated. This study determines the most effective optimization strategy for maximizing the total dissipation of rainbow-trapping silencers (RTSs), composed of graded side-branch cavities that enable broadband dissipation of sound through visco-thermal effects. Model-based and data-driven optimization strategies are compared, particularly in high-dimensional design spaces with flat cost function landscapes where gradient-based approaches are inadequate. It is found that model-based particle swarm optimization (PSO) outperforms simulated annealing, genetic algorithm, and surrogate method in maximizing RTS total dissipation, especially in high-dimensional designs. PSO uniquely handles flat or valleyed cost landscapes through efficient exploration–exploitation trade-offs. Data-driven approaches using Bayesian regularization neural networks (BRNNs) drastically reduce computational cost in high-dimensional spaces, though they require large datasets to avoid over-smoothing. In low dimensions, direct optimization on BRNN outputs suffices, making global search unnecessary. Both model-based and BRNN methods show robustness to input errors, but data-driven approaches handle output noise better. These findings, validated using transfer matrix models, offer strategic guidance for selecting optimization methods, especially when using computationally expensive visco-thermal finite element simulations., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Université—A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524"

  • Bravo, Teresa
  • Maury, Cédric
The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a aero-acoustic test bench. The metasilencer has been located between two rigid duct sections, 1m long, with outlet cross-sectional area 0.075 m x 0.075 m. The two-source and eight-microphone method has been used to determine the scattering matrix of the silencer in the general case of grazing flow. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524, This dataset corresponds to the figures included in the article: "Bravo, T., Maury, C. Converging rainbow trapping silencers for broadband sound dissipation in a low-speed ducted flow. Journal of Sound and Vibration 589, 118524 (2024). https://doi.org/10.1016/j.jsv.2024.118524", This work is part of the project TED2021-130103B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR, and the project PID2022-139414OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and by"ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157)., FIG1.tiff, FIG2.csv, FIG3.csv, FIG4.csv, FIG5.csv, FIG6.csv, FIG7.csv, FIG8.csv, FIG9.csv, FIG10.csv, FIG11.tiff, FIG12.csv, FIG13.tiff, FIG14a.csv,FIG14b.csv,FIG14c.csv,FIGB1.csv, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Maury, C., Bravo, T., Ali, F. Micro-perforated rainbow-trapping silencers with broadband sound dissipation and reduced drag under low-speed grazing flow. Journal of Sound and Vibration 616, 119228 (2025). https://doi.org/10.1016/j.jsv.2025.119228"

  • Bravo, Teresa
  • Maury, Cédric
The analytical simulated results have been done using Matlab simulations. The numerical simulations have been performed using Finite Element Method in Comsol Multiphysics. The schemas and photos have been based on the printed prototype muffler and the experimental set-up. The experimental data have been adquired in a aero-acoustic test bench. The metasilencer has been located between two rigid duct sections, 1m long, with outlet cross-sectional area 0.075 m x 0.075 m. The two-source and eight-microphone method has been used to determine the scattering matrix of the silencer in the general case of grazing flow. A complete description is provided in the corresponding publication., Each data file corresponds to the figure with the same name by order of appearance in the publication: Maury, C., Bravo, T., Ali, F. Micro-perforated rainbow-trapping silencers with broadband sound dissipation and reduced drag under low-speed grazing flow. Journal of Sound and Vibration 616, 119228 (2025). https://doi.org/10.1016/j.jsv.2025.119228, This dataset corresponds to the figures included in the article: "Maury, C., Bravo, T., Ali, F. Micro-perforated rainbow-trapping silencers with broadband sound dissipation and reduced drag under low-speed grazing flow. Journal of Sound and Vibration 616, 119228 (2025). https://doi.org/10.1016/j.jsv.2025.119228", This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157)., FIG1.tiff, FIG2.xlsx, FIG3.xlsx, FIG4.xlsx, FIG5.xlsx, FIG6.xlsx, FIG7.xlsx, FIG8.xlsx, FIG9.xlsx, FIG10.tiff, FIG11.xlsx, FIG12.xlsx, FIG13.xlsx,, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro-perforated rainbow-trapping silencers with broadband sound dissipation and reduced drag under low-speed grazing flow

  • Cédric, Maury
  • Bravo, Teresa
  • Fawad, Ali
23 páginas, 13 figuras, 1 tabla, The aeroacoustic optimization of rainbow trapping silencers (RTS) shielded from a low-speed turbulent flow by a micro-perforated panel (MPP) has been hardly explored in order to achieve simultaneous high broadband dissipation and low friction factor. Direct global optimization from aeroacoustic numerical models is still cumbersome. A cost-efficient hybrid optimization process is proposed based on maximization of the total dissipated power calculated from a Transfer Matrix Model (TMM) under downstream propagation conditions subject to an aerodynamic constraint on the MPP holes pitch and diameter based on RANS-Realizable k – ε parametric study. The TMM is validated against Large Eddy Simulations at global scale on the scattering properties of the MPP- RTS, but also at MPP hole scale, pointing out the key role played by in-hole vortical patterns in the dissipation mechanism and the flow-induced reduction of air mass at the wetted inlet of MPP holes. The hybrid optimization approach shows that a common set of MPP-RTS parameters are able to provide both high dissipation, slow sound and low drag performance in Darcy regime. Aeroacoustic measurements in a low-speed wind tunnel on a hybrid-optimized MPP-RTS proto- type corroborate the maximum total dissipation objective and friction factor constraint. Down- stream and upstream propagation conditions are found to respectively reduce and enlarge towards low and high frequencies the efficiency range of MPP-RTS whereby high dissipation and attenuation effects are prominent and occur well below that of unshielded RTS., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d’Excellence d’Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157). The authors are grateful to E. Bertrand, M. Amielh and D. Mazzoni for their technical and experimental support during the wind-tunnel testing at IRPHE Laboratory., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effects of Volumetric Modes on the Optimization of Micro-Perforated Multi-Layer Absorber Panels

  • Maury, Cédric
  • Bravo, Teresa
  • Mazzoni, Daniel
  • Amielh, Muriel
17e Congrès Français d'Acoustique-CFA 2025, 27-30 avril 2025, Paris, France. 7 páginas, 6 figuras., Acoustic wall-treatments composed of thin, lightweight micro-perforated multilayer panels (MPMPs) offer a potential solution for broadband absorption of ambient noise, with applications in building acoustics and transport systems requiring constraints on mass and thickness. A MPMP with a negative porosity gradient, induced by a decrease in perforation diameters, can ensure, after optimization, absorption greater than 0.9 over three octaves beyond 140 Hz, while maintaining sub-wavelength thickness. However, such a configuration presents practical limitations linked to the vibrating response of thin panels, which can degrade the broadband performance, and also to the difficulty of producing cylindrical micro-perforations with diameters less than 200 microns on millimetric thicknesses. This study examines the effect of the first volumetric modes of thin micro- perforated plates on the absorption, reflection and transmission loss of functionally-graded MPMPs. The optimization effort focuses on the distance between perforations, rather than their diameter, as well as on the depth of the cavities and thickness of the panels in order to maximize the total absorption of MPMPs from 100 Hz to 1 kHz. The impedance translation method and a spectral analysis of the MPMPs' scattering matrix have been implemented. Their effective properties are also examined. The optimization process succeeds in compensating for the absorption losses induced by the volumetric modes of the panels, except for those due to the first mode, which is strongly coupled to the acoustic resonances. An optimal decrease in perforation diameter remains the most effective strategy for merging resonances at low and medium frequencies, while an adequate increase of the holes pitch is more suitable for medium frequencies. These mechanical and geometrical parameters must be taken into account when optimizing MPMPs, depending on the frequency range targeted., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix- Marseille Université - A*MIDEX (AMX-22-RE-AB-157), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Low-drag rainbow-trapping filters for broadband sound dissipation in a low-speed ducted flow

  • Maury, Cédric
  • Bravo, Teresa
  • Ali, Fawad
  • Mazzoni, Daniel
  • Amielh, Muriel
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering. June 23rd to 26th 2025, Málaga (Spain). 8 páginas, 7 figuras., Rainbow-trapping filters (RTFs) have mostly been designed with closed-end terminations to achieve near-unit broadband absorption under acoustic excitation, with applications as shallow wall-treatments in building acoustics or short anechoic terminations. The current study considers opened rib-designed RTFs being traversed by a low-speed grazing flow. The double objective is to design an enhanced silencer able to achieve broadband sound dissipation, e.g. with minute reflection and transmission of the incident wave, while ensuring a low friction factor. A key element is the lining of the interface between the RTF cavity mouths and the flow duct. Micro-perforated panels (MPP) have been chosen that provide holes diameter – holes pitch parameters optimized to determine maximal total dissipation or minimal friction factor. MPPs also contribute to enhance slow sound effects towards lower frequencies than unlined RTFs. Finite Elements (resp. Reynolds Averaged Navier Stokes k-ε) models have been developed to produce acoustic (resp. aerodynamic) design charts with respect to the MPP parameters. A set of MPP parameters has been found that maximizes the aeroacoustic performance of the MPP-RTF silencer. It has been validated against low-speed wind-tunnel experiments that showed an adverse effect of downstream propagation conditions on the wideband dissipative performance of the MPP-RTF., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix- Marseille Université - A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multi-functional rainbow trapping filters for particle acoustic agglomeration

  • Bravo, Teresa
  • Maury, Cédric
  • Amielh, Muriel
Forum Acusticum / Euronoise 2025, the 11th EAA Annual European Conference on Acoustics and Noise Control Engineering. June 23rd to 26th 2025, Málaga (Spain). 8 páginas., Moving towards global zero-emissions in transport and energy supply industries would enable to achieve a quieter, cleaner and healthier urban environment, more resilient to climate-change. The World Health Organisationhas classified traffic noise as the second most important cause of ill health in Western Europe, behind only air pollution caused by very fine particulate matter. A leverage effect would be to enhance the agglomeration of the released ultrafine and fine particles into larger particles easily filtered out by classic clean air solutions. However, a major, still unsolved, challenge is to do it without requiring intense sound fields or high-drag flow mixing devices prone to increase flow-particle or particle-particle relative motion. Acoustic rainbow trapping filters (RTFs) have been shown to provide solutions for wideband low-frequency sound dissipation. In this work, we aim at exploiting the effective slow sound – small wavelength properties of acoustic metamaterials traversed by a low-speed flow to provoke mixing and nucleation of the convected ultrafine particles. We will explore conditions on the physical parameters of the RTFs and the seeded particles to produce simultaneous sound dissipation and particle agglomeration. The results open up multi-functional objectives to achieve simultaneous aerosol agglomeration, sound attenuation and low drag performance., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe". It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Université - A*MIDEX (AMX-22-RE-AB-157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slow-sound compression and aero-acoustic performance of rainbow-trapping silencers under low-speed grazing flow

  • Bravo, Teresa
  • Maury, Cédric
26 páginas, 15 figuras, 2 tablas, Slow-sound mechanisms are often invoked to explain broadband dissipation in rainbow-trapping silencers (RTSs), yet their robustness under grazing flow and their quantitative scaling remain largely unexplored. This study establishes a theoretical framework, assessed against numerical approaches and measurements, to elucidate slow-sound propagation and aero-acoustic perfor- mance in RTSs under low-speed grazing flow. Without flow, three wave regimes are identified – stiffness-controlled slow sound, inertial wave trapping, and fast-sound transition – governed by the effective compressibility of the resonant cavities. Closed-form asymptotic expressions derived at the quarter-wave resonance and compliance-cancellation frequencies reveal how cavity depth and visco-thermal losses enhance slow-sound or fast-sound effects across regimes. When grazing flow is introduced, near the quarter-wave resonance, interaction between convection and compressibility regularized by viscous losses reduces the expected convective shift in phase- speed, whereas near the compliance cancellation frequency, a stretching effect amplifies it. The Mach-number scaling of the slow-sound compression effect is validated on an optimized RTS prototype against the transfer matrix method, finite difference time domain model, flow-coupled finite-element method and wind-tunnel measurements up to Mach 0.09 under upstream (UPC) and downstream (DPC) propagation conditions. UPC broaden the high-dissipation plateau toward lower frequencies and DPC shift it upward. A key outcome is that the flow-induced losses further compress the UPC–DPC difference in slowed phase speeds beyond convective effects. Overall, the RTS slow-sound and dissipation performance stay robust to low-speed flow conditions. Beyond performance characterization, this work provides predictive scaling laws for the slow-sound- based optimization of compact RTSs operating under flow., This work is part of the project PID2022-139414OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. It has also received support from the French government under the France 2030 investment plan, as part of the Initiative d'Excellence d'Aix-Marseille Universit´e - A*MIDEX (AMX-22-RE-AB-157), Peer reviewed