Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Estudio de la fermentación y de diversos pretratamientos termofísicos para la mejora de las propiedades antioxidantes de productos en polvo obtenidos a partir de residuos de zanahoria de iv gama, Fermentation and thermophysical pretreatments for improving the antioxidant properties of powdered products obtained from iv range carrot wastes, Estudi de la fermentació i diversos pretractaments termofísics per a millorar les propietats antioxidants de productes en pols obtinguts a partir de residus de carlota de iv gama

  • Guillén Alonso, Javier
[ES] La obtención de ingredientes vegetales en polvo a partir de residuos de la industria alimentaria ha suscitado un interés creciente en los últimos años. Los procesos de conversión de estos residuos en productos en polvo permiten la valorización integral de sus componentes, posibilitando su reintroducción en la cadena alimentaria como ingredientes funcionales. De este modo, se obtienen productos estables, versátiles y ricos en nutrientes, al tiempo que se da valor a un producto de desecho que supone un problema medioambiental y de gestión para la industria. Además de favorecer la circularidad de los sistemas alimentarios, este enfoque contribuye al desarrollo de dietas más nutritivas y sostenibles. El proceso de obtención de productos en polvo se basa en tres operaciones unitarias sencillas tales como la desestructuración o triturado, la deshidratación y la molienda final hasta obtener un polvo fino. Sin embargo, existen evidencias científicas de que la aplicación de determinados pretratamientos sobre el material vegetal podría mejorar las características de los productos en polvo obtenidos a partir de este tipo de residuos, debido a los cambios estructurales promovidos. De este modo, el objetivo general del presente trabajo consiste en incorporar diferentes pretratamientos termofísicos y biológicos al proceso de obtención de ingredientes en polvo a partir de residuos de zanahoria. Concretamente, se propuso estudiar el efecto de distintos pretratamientos biológicos como la fermentación (FERM) o pretratamientos termofísicos como la aplicación de microondas (MW), ultrasonidos (US) o autoclavado (AUTO), sobre las distintas propiedades fisicoquímicas y antioxidantes del residuo de zanahoria generado en una línea de producción de palitos de IV gama, para después poder obtener el polvo de residuo de zanahoria pretratado mediante secado por aire caliente. El trabajo consistió en una primera parte en estudiar el efecto de las variables del pretratamiento con US (tiempo y masa de residuo), MW (potencia y tiempo) y FERM (microorganismo y tiempo) sobre las propiedades fisicoquímicas y antioxidantes del residuo pretratado. El estudio de la fermentación incluyó la evaluación del residuo de zanahoria como sustrato para el crecimiento de distintos microorganismos del género Lactobacillus considerados probióticos mediante el recuento de viables y los cambios de pH a distintos tiempos de fermentación. Una vez seleccionadas los niveles de las variables, se procedió a la obtención del polvo mediante triturado del residuo, aplicación de los pretratamientos seleccionados, secado por aire caliente a 60 ºC durante 10 h y molienda final. Los polvos obtenidos se evaluaron en cuanto a sus propiedades fisicoquímicas y antioxidantes. Los resultados obtenidos pusieron de manifiesto que la combinación de los pretratamientos ensayados con los procedimientos de secado y molienda determinan las propiedades del polvo. El estudio inicial de los pretratamientos sobre el residuo de zanahoria triturado permitió la selección de las variables más adecuadas que fueron: en cuanto a la FERM, se seleccionó el microorganismo Lactobacillus salivarius spp. salivarius durante 24 h; con respecto a la aplicación de US, se seleccionaron 15 min de tratamiento a 40 kHz sobre 100 g de muestra; con respecto al uso de MW, se seleccionó una potencia de 3 W/g durante 4 min; por su parte, el autoclavado consistió en la aplicación de 120 ºC durante 5 min. Los resultados obtenidos mostraron cierta mejora en las propiedades antioxidantes y fisicoquímicas de los polvos pretratados mediante fermentación y ultrasonidos, mientras que se evidenció degradación de éstas en el caso de microondas y autoclave. En términos generales, se concluye que los polvos pretratados obtenidos a partir de residuo de zanahoria son una alternativa interesante para la reincorporación de estos desechos en la cadena alimentaria, así como para la mejora nutricional que suponen los pretratamientos y el secado por a, [EN] Obtaining powdered vegetable ingredients from food industry waste has garnered increasing interest in recent years. The processes of converting this waste into powdered products allow for the comprehensive valorization of is components, enabling heir reintroduction into the food chain as functional ingredients. This results in stable, versatile, and nutrient-rich products while adding value to a waste producto that poses environmental and management challenges for the industry. In addition to promoting the circularity of food systems, this approach contributes to the development of more nutritious and sustainable diets. The process of obtaining powdered products is based on three simple unit operations: deconstruction or grinding, dehydration, and final milling to obtain a fine powder. However, there is scientific evidence that the application of certain pretreatments on plan material could improve the characteristics of the powdered products obtained from this type of waste, due to the structural changes promoted. Therefore, the general objective of this work is to incorporate different thermophysical and biological pretreatments into the process of obtaining powdered ingredients from carrot waste. Thus, this study aimed to investigate the effect of various biological pretreatment such as fermentation (FERM) or thermophysical pretreatments such as the application of microwaves (MW), ultrasound (US), or autoclaving (AUTO) on the different physicochemical and antioxidant properties of carrot waste generated in a production line of IV range carrot sticks, to later obtain pretreated carrot waste through hot air drying. The work consisted of an initial study of the effect of the pretreatment variables with US (time and mass of residue), MW (power and time), and FERM (microorganism) on the physicochemical and antioxidant properties of the pretreated residue. The fermentation study included the evaluation of carrot waste as a substrate for the growth of different microorganisms of the genus Lactobacillus considered probiotics, by counting viable cells and changes in pH at different fermentation times. Once the variable levels were selected, the powder was obtained by grinding the residue, applying the selected pretreatment, drying with hot air at 60 ºC for 10 hours, and final milling. The obtained powders were evaluated for their physicochemical and antioxidant properties. The results showed that the combination of the tested pretreatments with the drying and milling procedures determines the powder s properties. The initial study of the pretreatments on the shredded carrot waste allowed for the selection of the most suitable variables, which were: for FERM, the microorganism Lactobacillus salivarius spp. salivarius was selected for 24 hours; regarding the application of US, 15 minutes of treatment on 100 g of sample were selected; regarding the use of MW, a power of 3 W/g for 4 minutes was selected; autoclaving consisted of applying 120 ºC for 5 minutes. The results showed some improvement in the antioxidant and physicochemical properties of the powders pretreated by fermentation and ultrasound, while degradation of these properties was observed in the case of microwaves and autoclave. In general terms, it is concluded that the pretreated powders obtained from carrot waste are an interesting alternative for the reintegration of this waste into the food chain, as well as for the nutritional improvement provided by the pretreatments and hot air drying, granting them interesting applications in food preparation and potentially incorporating them into different food matrices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Análisis de las propiedades antioxidantes y antimicrobianas de productos en polvo obtenidos a partir de residuos de confección de hortalizas en cooperativa, Antioxidant and antimicrobial properties of powdered products obtained from vegetable wastes, Anàlisi de les propietats antioxidants i antimicrobianes de productes en pols obtinguts a partir de residus de confecció d&apos, hortalisses en cooperativa

  • Labrador Miguel, Patricia
[ES] El desperdicio alimentario es un problema a nivel mundial para el que se busca solución mediante la valorización de los residuos generados. En concreto, durante el procesado de frutas y hortalizas se pierden pieles, semillas, hojas externas, bagazos o partes dañadas en formas de residuos. Todos ellos cuentan con grandes cantidades de compuestos antioxidantes y bioactivos, con propiedades nutricionales a tener en cuenta para ser valorizados. La obtención de productos en polvo a partir de estos residuos es una alternativa interesante para evitar este desperdicio de nutrientes, ya que permite una valorización integral de los mismos. Los productos en polvo obtenidos a partir de frutas u hortalizas son concentrados, estables y versátiles, de modo que mantienen o incluso mejoran las propiedades el contenido en componentes antioxidantes y bioactivos del material de partida, pudiendo llegar a superarlo gracias al procesado. En este trabajo se obtuvieron productos en polvo a partir de diferentes hortalizas provenientes de las líneas de confección de bandejas y IV gama en cooperativa: apio, brócoli, col repollo, ajo puerro y zanahoria. Los productos se obtuvieron mediante y proceso de triturado, secado por aire caliente (SAC) o liofilización (LIO, y molienda con el fin de obtener un polvo fino. Los ingredientes en polvo obtenidos se analizaron en cuanto a sus propiedades fisicoquímicas (actividad del agua, humedad, contenido en sólidos solubles y tamaño de partícula) y antioxidantes (contenido en fenoles y flavonoides totales y actividad antioxidante por los métodos de los radicales libres ABTS y DPPH); adicionalmente se realizó la identificación de compuestos fenólicos específicos mediante cromatografía líquida de alta resolución (HPLC) y se estudió su potencial antimicrobiano mediante ensayos de inhibición en placa y determinación de la concentración mínima inhibitoria (CMI) frente a distintos microorganismos (Listeria innocua, S. aureus, Salmonella y E. coli). Los resultados del presente trabajo demostraron que fue posible obtener productos en polvo con una actividad del agua que asegura su estabilidad, y demostraron que el método de deshidratación empleado influye en las características fisicoquímicas y antioxidantes, siendo los polvos LIO más finos que los SAC por ser más fácil de moler gracias a la estructura porosa formada al sublimar el el hielo, y presentando los SAC un mayor contenido en fenoles y flavonoides totales, así como una actividad antioxidante superior, por norma general. Además, se confirmó que estos productos en polvo tienen cierta capacidad antimicrobiana en los ensayos de inhibición en placa, a pesar de que los resultados obtenidos en el ensayo de concentración mínima inhibitoria no fue el esperado. Una vez finalizado este trabajo, se puede concluir que la valorización integral de residuos de frutas y hortaliza mediante la producción de productos en polvo es una alternativa de gran interés. Esto se debe a la gran versatilidad que ofrecen los productos en polvo, así como las mejoras en propiedades antioxidantes y nutricionales que estos pueden aportar a las formulaciones a las que se añadan. Además, si se confirma el potencial antimicrobiano que tienen podrían llegar a utilizarse como conservantes naturales., [EN] Food waste is a worldwide problem for which a solution is being sought through the valorization of the waste generated. Specifically, during the processing of fruits and vegetables, skins, seeds, outer leaves, bagasse or damaged parts are lost in the form of waste. All of them contain large amounts of antioxidant and bioactive compounds, with nutritional properties to be considered for valorization. Obtaining powdered products from these residues is an interesting alternative to avoid this waste of nutrients, since it allows an integral valorization of them. Powdered products obtained from fruits or vegetables are concentrated, stable and versatile, so that they maintain or even improve the properties of the antioxidant and bioactive components content of the starting material and can even surpass it thanks to processing. In this work, powdered products were obtained from different vegetables from the tray packing and pre-prepared convenience food lines in the cooperative: celery, broccoli, cabbage, leek and carrot. The products were obtained by grinding, hot air drying (SAC) or freeze drying (LIO) and milling in order to obtain a fine powder. The powdered ingredients obtained were analyzed for their physicochemical properties (water activity, moisture, soluble solids content and particle size) and antioxidant properties (total phenol and flavonoid content and antioxidant activity by ABTS and DPPH free radical methods); in addition, specific phenolic compounds were identified by highperformance liquid chromatography (HPLC) and their antimicrobial potential was studied by plate inhibition assays and determination of the minimum inhibitory concentration (MIC) against different microorganisms (Listeria innocua, S. aureus, Salmonella and E. coli). The results of the present work showed that it was possible to obtain powdered products with a water activity that ensures their stability, and demonstrated that the dehydration method used influences the physicochemical and antioxidant characteristics, with LIO powders being finer than SAC powders because they are easier to grind thanks to the porous structure formed by the sublimation of ice, and SAC powders having a higher content of total phenols and flavonoids, as well as a higher antioxidant activity, as a general rule. In addition, it was confirmed that these powdered products have some antimicrobial capacity in the plate inhibition assays, although the results obtained in the minimum inhibitory concentration assay were not as expected. Once this work has been completed, it can be concluded that the integral valorization of fruit and vegetable wastes through the production of powdered products is an alternative of great interest. This is due to the great versatility offered by powdered products, as well as the improvements in antioxidant and nutritional properties that they can provide to the formulations to which they are added. In addition, if their antimicrobial potential is confirmed, they could be used as natural preservatives
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Characterization of sugar transporters of biotechnological interest of S. cerevisiae strains, Characterization of sugar transporters of biotechnological interest of S. cerevisiae strains, Caracterització de transportadors de sucres de ceps de l&apos, espècie S. cerevisiae d&apos, interés biotecnològic

  • Ibáñez Rodríguez, Nerea
[ES] La elaboración del vino se produce por la fermentación de las levaduras, que convierten el azúcar del mosto de las uvas en alcohol. Las levaduras más usadas para esto son las del género Saccharomyces. El transporte de azúcares está regulado por las HXT, que son una gran familia multigénica. Hay transportadores con baja afinidad, como el HXT1 y el HXT3. Cuando se expresan solamente estos transportadores, la fermentación completa de azúcares tiene lugar, por lo tanto, son muy importantes en la fermentación del vino. Entre los transportadores de alta afinidad se encuentran el HXT2, HXT6 y el HXT7 y se requieren para la fermentación normal. Los transportadores HXT6 y HXT7 se requieren al final de la fermentación alcohólica. Para que la fermentación alcohólica tenga éxito, se necesitan al menos cuatro o cinco transportadores de hexosa, cada uno con una función diferente en diversas etapas de la fermentación. Debido a la gran similitud de la secuencia de HXT6 y HXT7, pueden ocurrir recombinaciones entre cepas de Saccharomyces, cada una con recombinaciones distintas, por lo que se utilizarán los haplotipos. Para poder estudiar la función de HXT6 y HXT7 en levaduras, a la cepa V5 MTF 255, que está modificada genéticamente sin HXTs, se le introducirán HXTs de otras cepas. En el proyecto se comprobará que la cepa V5 MTF 255 tiene la región correcta del genoma, y se hará una transformación para introducir el gen de HXT6 de cepas de interés en la cepa V5 MTF 255, que se clonará. Para esto se diseñarán los cebadores. Posteriormente se utilizarán oligos de verificación para amplificar la región del genoma de VS MTF 255 donde se ha introducido el gen, con el fin de después secuenciarla, y, de esta forma, comprobar que el fragmento de DNA se ha introducido en el lugar correcto del genoma. De esta manera, se conseguirá la cepa deseada que contiene cada HXT. Con esta cepa podremos comprobar si las levaduras con HXTs recombinadas obtienen y procesan la glucosa y la fructosa de la misma manera que las levaduras con HXTs que no se han recombinado, o esta varía. Esto será útil para mejorar la fermentación realizada por las levaduras con el fin de obtener vino., [EN] Wine elaboration is produced by yeast fermentation, that transforms the sugar of the grape must into alcohol. The yeasts most used for this are the ones of the Saccharomyces genus. Sugar transport is regulated by the HXT, that are a big multigenic family. There are transporters with low affinity, such as the HXT1 and the HXT3. When only these transporters are expressed, the complete sugar fermentation takes place, therefore, they are very important in wine fermentation. Among the transporters of high affinity, the HXT2, HXT6 and HXT7 can be found, and they are required for normal fermentation. HXT6 and HXT7 transporters are required at the end of the alcoholic fermentation. For this fermentation being successful, al least four or five hexose transporters are needed, each with a different function in the diverse stages of the fermentation. Due to the high similarity of HXT6 and HXT7 sequences, recombinations between Saccharomyces strains could have happened. Each strain would have different recombinations, so haplotypes will be used. To study the function of HXT6 and HXT7 in yeasts, into the strain V5 MTF 255, that is genetically modified without HXTs, HXTs of other strains will be introduced. In the project it will be proved that the strain V5 MTF 255 has the correct region of the genome, and a transformation will be done to introduce the HXT6 gene of strains of interest in V5 MTF 255 strain, that will be cloned. For this, primers will be designed. After this, verification primers will be used to amplify the genome region of V5 MTF 255 where the gene has been introduced to then sequence it and, in this way, prove that the DNA fragment has been introduced in the correct region of the genome. In this way, the desired strain with each HXT will be obtained. With this strain we will be able to prove if the yeasts with recombined HXTs obtain and process the glucose and fructose in the same way as the yeasts with not-recombined HXTs, or it varies. This will be useful to improve the fermentation performed by yeasts to obtain wine., This project has received funding from the Spanish government and EU ERDF-FEDER projects PID2021-126380OB-C31 and PID2021- 126380OB-C33 to AQ and EB, respectively. IATA-CSIC received funding from the Spanish government, ref. MCIN/AEI/10.13039/501100011033, as a ‘Severo Ochoa’ Center of Excellence (CEX2021-001189-S), with AQ as PI.