Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Deep learning data PMC

  • Asociación de la Industria Navarra (AIN)
  • Universidad Pública de Navarra (UPNA)
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Dataset that includes the geometric characteristics (7) and the emissivity curve (110 points between 0-25um) of four vertically embedded alumnium fibers in CSH substrate., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MIRACLE_WP1_FF Modelling_CH

  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Cementitious matrices are composed of Portlandite (CH) and a porous element, called C-S-H gel that resembles Tobermorite minerals. The dielectric response of CH has been calculated through Force Field simulations by using a software package called GULP (https://gulp.curtin.edu.au/). This datasets annexes the output of our FF simulation for CH, where the complex dielectric function of this minerals can be found. This dataset was used for the publication https://doi.org/10.1021/acsaom.3c00082., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MIRACLE_WP1_FF Modelling_Tob11

  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Cementitious matrices are composed of Portlandite (CH) and a porous element, called C-S-H gel that resembles Tobermorite minerals. The dielectric response of Tobermorite has been calculated through Force Field simulations by using a software package called GULP (https://gulp.curtin.edu.au/). This datasets annexes the output of our FF simulation for Tobermorite , where the complex dielectric function of this minerals can be found. This dataset was used for the publication https://doi.org/10.1021/acsaom.3c00082., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Temperature of single-junction solar cells with Ordinary Portland Cement radiative cooler

  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [The OPC emissivity has been calculated with Transfer-Matrix-Method applied to a slab having roughness RMS and complex permittivity obtained by applying the effective medium theory of Slovick (Slovick, B. A. Negative Refractive Index Induced by Percolation in Disordered Metamaterials. Physical Review B 95, 094202 (2017)) to the OPC microstructure calculated with µic (https://micepfl.sourceforge.net/) and using the complex permittivity obtained by CSIC with GULP (https://gulp.curtin.edu.au/) for the homogeneous phases. This is described in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022).], [The solar cell operating temperature when coupled to the OPC based radiative cooler has been obtained by means of the detailed-balance model commonly employed in the literature. This is discussed in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022).], This dataset contains information of the behavior of temperature of single-junction solar cells with Ordinary Portland Cement radiative cooler., - The OPC emissivity has been calculated with Transfer-Matrix-Method applied to a slab having roughness RMS and complex permittivity obtained by applying the effective medium theory of Slovick (Slovick, B. A. Negative Refractive Index Induced by Percolation in Disordered Metamaterials. Physical Review B 95, 094202 (2017)) to the OPC microstructure calculated with µic (https://micepfl.sourceforge.net/) and using the complex permittivity obtained by CSIC with GULP (https://gulp.curtin.edu.au/) for the homogeneous phases. This is described in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022). - The solar cell operating temperature when coupled to the OPC based radiative cooler has been obtained by means of the detailed-balance model commonly employed in the literature. This is discussed in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022)., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity Portlandite

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., We measured the reflectivity of Portlandite fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity Tobermorite

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [MIR: The reflectivity of the sample was determined by means of a gold-coated 12° integrating sphere in downward configuration equipped with an MCT detector from PIKE and mounted on an FTIR JASCO 6300 spectrometer. For these measurements, sample consisted of or fine-grained powders, which were inserted into the sphere according to manufacturer specifications. UV-VIS-NIR: Reflectivity was measured by using a portable spectrophotometer (410-SOLAR). Sample was in fine ground] [Data were processed by using Spectra Manager (JASCO) and SolarDATA (Surface Optics Corp) and then extracted to .cvs and .txt file. Finally, the data were merged using Kaleidagraph software and saved as .txt], We measured the reflectivity of Portlandite fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity White Cement

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [MIR: The reflectivity of the sample was determined by means of a gold-coated 12° integrating sphere in downward configuration equipped with an MCT detector from PIKE and mounted on an FTIR JASCO 6300 spectrometer. For these measurements, sample consisted of or fine-grained powders, which were inserted into the sphere according to manufacturer specifications. UV-VIS-NIR: Reflectivity was measured by using a portable spectrophotometer (410-SOLAR). Sample was in fine ground] [Data were processed by using Spectra Manager (JASCO) and SolarDATA (Surface Optics Corp) and then extracted to .cvs and .txt file. Finally, the data were merged using Kaleidagraph software and saved as .txt], We measured the reflectivity of White Cement paste fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, No