Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Effect of chloride im the electrochemiscal treatment of the trichromy procion HEXL [Dataset]

  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Fernández Sáez, Javier
  • Cases, Francisco|||0000-0001-8105-4489
[EN] The resulting solutions from the cotton fabrics dyeing using the trichromy Procion HEXL, with NaCl as electrolyte, were electrochemically treated. These dyes have two azo groups as chromophores and two monochlorotriazinic groups as reactive groups in their structure. The combined oxidation/reduction at 125 mA cm-2 in a filter-press cell without compartment separation was carried out using an anode of Ti/SnO2eSbePt and a cathode of stainless steel. This procedure has been effective in previous experiments using sulphate as electrolyte. A significant decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) was obtained. Moreover, the process took place efficiently. The average oxidation state (AOS) and the carbon oxidation state (COS) data confirmed the presence of stable oxidized intermediates in the electrolysed solution. The chromatography and the UVeVisible spectrophotometry assays indicated that full decolourisation is obtained at a loaded charge of around 0.81 Ah L-1 which is associated with an electrical energy per order (EEO) of 1.20 kWh m-3., The authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P and Red E3Tech CTQ2017-90659-REDT). The authors wish to acknowledge Tim Vickers for help with the English revision and Texcoy S.L. company (Spain) where the dyeing processes were done.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrochemical Atrazine Removal. On the behaviour of Atrazine removal from water using fabrics as anodes and cathodes

  • Cases, Francisco|||0000-0001-8105-4489
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Khenifi, Aicha
  • Hamous, Hanene
[EN] This study examines the degradation of atrazine (ATZ) with Pt-modified textile electrodes using an electrochemical method that is comparatively studied in two electrochemical cell configurations: cells with separated anodic and cathodic compartments (divided configuration); and without any separation (undivided configuration). The influence of the presence of chloride ions was studied. The best results were obtained when an undivided cell was used. The morphology and composition of the dispersed Pt coatings were analyzed using field emission scanning electron microscopy (FESEM) and Energy Dispersive X-Ray Analysis. The FESEM analyses confirmed that the textile surface was effectively modified by the electrocatalytic material. High performance liquid chromatography, gas chromatography mass spectrometry, and spectroscopic methods were used to follow the evolution of major oxidation products. Total organic carbon, chemical oxygen demand, and total nitrogen were used to evaluate the degradation efficiency of treated aqueous solutions. The experimental results obtained indicate that the efficiency of the electrochemical treatment was high with a low energy consumption when using electrodes based on textile materials, such as anodes or as cathodes (in particular, in electrolysis without compartment separation). All these can be produced at very competitive prices., Chemviron Carbon who kindly donated the FlexzorbTM FM10 activated carbon fabrics and Funding for open access charge, CRUE-Universitat Politècnica de València, are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Carbon textiles electrodes modified with RGO and Pt nanoparticles used for electrochemical treatment of azo dye [Dataset]

  • Cases, Francisco|||0000-0001-8105-4489
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Khenifi, Aicha
  • Hamous, Hanene
[EN] The efficiency of Orange G (OG) azo dye degradation using an electrochemical method under potentiostatic conditions has been comparatively studied in two electrolytic cells (divided and undivided cells) in the presence or absence of chloride ions with Pt-modified textile electrodes. The morphology of the carbon-based electrodes with nanoparticles of platinum electrochemically dispersed on their surface was analyzed using field emission scanning electron microscopy (FESEM) and EDX analysis. The FESEM analyses confirmed that the textile surface was coated by Pt nanoparticles. According to the experimental results obtained, when the same solutions are comparatively treated with the two cells, the undivided cell always gives a quicker decolorization than the divided cell – and the decrease in total organic carbon (TOC), chemical oxygen demand (COD), and total nitrogen (TN) confirms this result. The degree of OG removal was monitored by spectroscopic methods and high-performance liquid chromatography (HPLC). The results indicate that that full best dye removal is obtained at a loaded charge of around 0.17 Ah L−1 which is associated with an electrical energy per order (EEO) of 0.189 kW h m−3 order−1. Based on the results obtained, the electrochemical process with TCRGO-Pt electrodes could be useful as a pretreatment technique or treatment for decolorizing wastewaters containing dyes., The authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P) and Chemviron Carbon who kindly donated the FlexzorbTM FM10 activated carbon fabrics. The invitation by the E3TECH Spanish Network of Excellence (CTQ2017- 90659-REDT (MEIC/AEI)) is kindly acknowledged.