Pasar al contenido principal

OPTIMIZACION DE LA OBTENCION DE NUEVOS EXTRACTOS PROTEICOS A PARTIR DE BIOMASA DE SETAS Y ALGAS Y DESARROLLO DE ESTRUCTURAS ALIMENTARIAS MEDIANTE 3D PRINTING Y EXTRUSION

PID2022-138328OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Ulva spp. Casting and melt compounding films_Data

  • Sanz, Vanesa
  • Baltrusch, Kai L.
  • Torres, María Dolores
  • Domínguez, Herminia
  • Fabra, María José
  • López-Rubio, Amparo
This study investigates the valorisation of Ulva spp. biomass after Autohydrolysis (AH) extraction performed at 120–200 °C as feedstock for biopolymer films, providing the first comparative assessment of casting and melt-compounding techniques. Compositional analysis confirmed that the biomass contained carbohydrates (27–36 %, with 4–24 % of cellulose), proteins (11–26 %) and ashes (10–42 %). The seaweed biomass also contained phenolic compounds (12–64 mg Gallic Acid Equivalents (GAE)/g sample), which exhibited antioxidant properties (5–11 mg Trolox Equivalent Antioxidant Capacity (TEAC)/g sample). Lower molecular weights were observed with increasing AH temperature, indicating partial depolymerization of the macromolecules. Films were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and X-Ray Diffraction (XRD), together with mechanical and water-barrier properties. The casting method produced continuous, slightly transparent films with Internal Transmittance (Ti) values of 1–40 %, higher stiffness (Young's Modulus, E: 399.83–1852.85 MPa), lower flexibility (Elongation at Break, ɛb: 1.34–12.28 %), low Water Vapor Permeability (WVP: 1.53–2.28 × 10−10 g m·Pa−1·s−1·m−2) and moderate hydrophilicity (contact angle: 57.95°–65.60°). Melt-compounding films were opaque, more homogeneous films with lower stiffness but, in some cases, greater extensibility (ɛb: 1.31–13.33 %), higher WVP (7.31–9.12 × 10−10 g m·Pa−1·s−1·m−2) and increased hydrophilicity (contact angle: 23–44°). Thermal–mechanical processing also influenced molecular organization and the distribution of hydrophilic groups. Overall, this study demonstrates, for the first time, that AH residues derived from Ulva spp. can be transformed into bio-based films with tunable structural, mechanical, and barrier properties., V. Sanz thanks for her postdoctoral grant (JDC2022-048795-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was supported by grants PID2022-138328OB-C21, PID2021-124017-B-I00 and CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Protein extraction from the industrial solid residue of brown seaweed after alginate extraction [DATASET]

  • Bojorges, Hylenne
  • Martínez Sanz, Marta
  • Fontes Candia, Cynthia
  • Díaz Piñero, Laura
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Fabra, María José
The growing interest in the “blue-bioeconomy” and the valorization of macroalgae has driven research and industrial efforts to develop valorization strategies for the by-products generated during alginate extraction. Sequential extraction methods, such as acid/alkali treatment, enzymatic, ultrasound, and pH-shift process, were investigated and compared in order to obtain protein extracts from the solid residues after alginate extraction from two brown seaweed species (Ascophyllum nodosum and Saccharina latissima). Applying a sequential extraction, combining several methods, allowed the recovery of more than 29.5 % of the total protein from the residues. The resulting extracts exhibited optimal functional properties in terms of oil and water retention and outstanding emulsifying and foaming capacity. In addition, the protein extracts showed considerable polyphenol content, remarkable antioxidant activity, and an enhanced ability to inhibit angiotensin-converting enzyme (ACE). This study demonstrated that the residues after alginate extraction are a sustainable and promising source of protein with potential applications in the food industry., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033:PID2022-138328OB-C21, PID2020-117744RJ-I00; Generalitat Valenciana: GRISOLIAP/2019/007; Severo Ochoa Centre of Excellence: CEX2021-001189-S), and by the Horizon Europe project CIRCALGAE (Grant Agreement No. 101060607)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Functional and bioactive properties of the protein-polysaccharide extracts from brown algae: Exploring novel functional ingredients [DATASET]

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
The present work reports the extraction of protein-polysaccharide extracts from brown algae (A. nodosum and S. latissima) for potential food industry applications. A sequential extraction method was employed to maximize yields by incorporating ultrasound, pH adjustment, and enzymatic treatment. The resulting extracts were characterized by their composition, bioactive properties, and emulsifying capabilities. Although the overall extraction yield was significantly higher for A. nodosum extracts, the protein content in both species' extracts increased at least threefold following enzymatic treatment, with S. latissima achieving the highest protein percentages. The enzymatically treated extracts mainly consisted of low molecular weight proteins (17–25 %) and carbohydrates (59–62 %), with alginate and fucoidan as the primary polysaccharides. These extracts exhibited a high emulsifying capacity (approximately 99 %), attributed to their relatively high protein content (acting as surfactants) and lower molecular weight, which enhanced oil droplet stabilization in emulsions. The increased protein content positively correlated with angiotensin-converting enzyme (ACE) inhibitory activity. Furthermore, the antioxidant activity was higher in extracts from A. nodosum, which is linked to sulfated fucoidan/fucan structures and polyphenols., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PID2020-117744RJ-I00; Generalitat Valenciana: GRISOLIAP/2019/007; Severo Ochoa Centre of Excellence: CEX2021-001189-S), co-funded by the European Regional Development Fund (ERDF, “A way of making Europe”), and by the Horizon Europe project CIRCALGAE (Grant Agreement No. 101060607)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Exploring composites of alternative flour sources and marine biomass residues for sustainable degradable food packaging films [DATASET]

  • Hernández-García, Eva
  • Escalante Aburto, Anayansi
  • Fabra, María José
  • López-Rubio, Amparo
This study proposes an innovative strategy to valorise agricultural and marine by-products by developing sustainable films based on different pigmented popcorn and sorghum flours, rich in bioactive polyphenols and starch, combined with holocellulosic residue from Gelidium corneum (marine biomass), a by-product of industrial agar extraction, as a possible alternative to conventional plastics. Films were produced by melt-compounding and compression-moulding with a 40:60 w/w ratio of popcorn or sorghum flour to algae residue and were compared to control films without marine biomass. The effect of incorporating and storing marine biomass was investigated. Results showed that the addition led to a more heterogeneous film morphology and modified the optical properties of the marine biomass films, decreasing luminosity, whiteness index, and internal transmittance, while enhancing yellow and green hues due to pigment interactions, with significant changes occurring during storage. In general, incorporating marine biomass increased tensile strength and stiffness, reduced elongation at break, and, upon storage, further enhanced rigidity through starch retrogradation. Additionally, the presence of biomass modulated water vapor permeability, water uptake, and hydrophobicity. These findings demonstrate the potential of combining pigmented popcorn and sorghum flours with Gelidium corneum residue as sustainable composite films, representing a promising strategy for environmentally friendly packaging., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged. Escalante-Aburto thanks the support of Challenge-Based Research Funding 2022 of Tecnologico de Monterrey [I008 - IOR001 - C6-T1 - E, November 3, 2022]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Algae additives for sustainable materials_Dataset

  • Hernández-García, Eva
  • Fabra, María José
  • Reyes, Alcira
  • López-Rubio, Amparo
- Scanning Electron Microscopy of the cross-section of the films (.tif archives). --Crystallinity, mechanical properties, contact angle, solubility, water uptake, WVP and OP of the films based on starch and marine biomass (samplesdata.xlsx). -- Parameters and visual appearance of the films before, during and after the disintegration process (Ensayo-desintegración-ISO20200.pdf).-- DTG first derivative curves of the films (TGA.xlsx).-- XRD patterns of the films based on starch and marine biomass (XRD.xlsx), The valorisation of marine biomass is increasingly considered a potential sustainable strategy for developing biodegradable packaging materials. In this work, the incorporation of Gelidium corneum holocellulosic residue and Rugulopteryx okamurae algae into starch-based films was explored to gain insight into their possible effects on film properties. Both marine biomasses appeared to contribute to improved moisture resistance, showing reductions in water intake, permeability and solubility, although the extent of these effects varied. Films containing Gelidium corneum generally showed more notable enhancements, including increased rigidity, with tensile strength at break values reaching up to roughly twice those of pure starch films. In contrast, the incorporation of Rugulopteryx okamurae tended to produce more heterogeneous films with lower mechanically performance, without clear improvements in tensile strength and in some reductions at higher algae concentrations. These differences may be related to variations in cellulose content and the degree of compatibility with the starch matrix. Thermal and XRD analyses indicated that starch retrogradation occurred during storage, leading to increases in crystallinity, an effect that appeared particularly marked in films with Rugulopteryx okamurae (from 13.4% to 58.3%). Biodegradation tests showed that only films containing Gelidium corneum films met the ISO 20200 standard of over 90% degradation within 90 days under composting conditions. Overall, Gelidium corneum residue and Rugulopteryx okamurae algae show potential as additives for producing starch-based films, although their influence on mechanical, thermal and water-related properties differs considerably., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of the paper Rice Straw Nanocrystalline Cellulose as a High-Value Reinforcement for Fungal biomass/Starch Biocomposites: Structural, Thermal, and Barrier Property Enhancement

  • Cabrera Villamizar, Laura A.
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
Data sheet consisting of several tabs. Each tab contains data on the characterization of raw materials and developed materials. Each tab is labeled with the type of analysis performed. The analyses performed include: moisture content, lipids, proteins, chitin, alpha-glucans, thermogravimetric analysis, FTIR, XRD, and particle size analysis, among others., This study evaluates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum‑based plastics. Biomass is a renewable, fast‑growing resource, rich in carbohydrates (≈50.23%) and proteins (≈29.57%), but its direct processing into materials is limited by its mechanical performance. To overcome this limitation, composite materials were developed by combining fungal biomass with starch and rice‑straw nanocrystalline cellulose (RSNC), providing an effective valorization route for agricultural residues. The incorporation of RSNC led to a marked improvement in the mechanical properties of the composites, with no significant changes in visual appearance or color. A strong stiffening effect was observed, as the Young’s modulus increased from 139.45 MPa in the control formulation to 1239.60 MPa at 10 wt% RSNC, reaching values comparable to conventional polypropylene. In addition, the presence of 5 wt% RSNC reduced water vapor permeability by 47% and increased the water contact angle, indicating enhanced moisture resistance. These improvements were attributed to strong physical interactions and hydrogen bonding between RSNC and the biopolymeric matrix. X‑ray diffraction analysis showed a significant increase in crystallinity at higher RSNC contents, suggesting the formation of a percolating nanocellulose network. The materials were produced using a solvent‑free process compatible with conventional thermoplastic equipment. Overall, this work demonstrates a scalable, sustainable approach to producing high‑performance fungal‑based composites suitable for packaging applications., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union’s Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through aSantiago Grisolía fellowship (GRISOLIA/2021/050)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Marine-derived antimicrobial extracts from Ulva spp. obtained by autohydrolysis for 3D-printed applications

  • Bernabeu, Manuel
  • Torres, María Dolores
  • Fabra, María José
  • Domínguez, Herminia
  • Collado, María Carmen
  • López-Rubio, Amparo
  • Sanz, Vanesa
Excel file data_biochemical_AUC_correlation: Sheet 1: Biochemical analysis.-- Sheet 2: AUC_bacteria.-- Sheet 3: Pearson r.-- Sheet 4: Spearman r, The increasing prevalence of antibiotic-resistant bacteria underscores the urgent need for sustainable antimicrobial alternatives. In this study, Ulva spp. biomass was valorized through autohydrolysis (AH) up to 160 °C as a green extraction technology to recover bioactive compounds without chemical additives. The obtained aqueous (AF) and ethanol-precipitated (AFP) fractions were characterized in terms of composition, antioxidant capacity, molecular weight distribution, and biological activity. The AF and AFP extracts showed high carbohydrate content (AF: 39.62%; AFP: 56.07% dw), mainly rhamnose and uronic acids, as well as significant mineral richness (Na and K > 15 mg/g). Total phenolic content and antioxidant capacity were higher in AF (4.19 mg GAE/g; 6.14 mg TEAC/g) than in AFP (2.92 mg GAE/g; 1.95 mg TEAC/g), whereas molecular weight analysis revealed a predominance of medium-sized species (1–100 kDa) in AF and larger compounds (>100 kDa) in AFP. Both extracts inhibited the growth of Staphylococcus aureus and Escherichia coli. Correlation analysis revealed strain-dependent relationships between antimicrobial activity and extract composition, whereas no effects were observed on potential probiotic Lactobacillus and Bifidobacterium strains under the tested conditions. The incorporation of AF and AFP into ulvan-based 3D-printed hydrogels yielded printable and mechanically stable materials (G′ > G″), exhibiting adequate viscoelastic properties and no water release after four weeks of storage. These findings demonstrate, for the first time, the feasibility of coupling AH extraction with additive manufacturing to develop multifunctional marine-derived materials combining antimicrobial potential and structural stability, in accordance with the principles of green chemistry and circular bioeconomy., Vanesa Sanz gratefully acknowledges support from a postdoctoral fellowship (JDC2022-048795-I) financed by MCIN/AEI/10.13039/501100011033 and co-funded by the European Union through the NextGenerationEU/PRTR program. Manuel Bernabeu acknowledges support from a postdoctoral “Ramón y Cajal” grant (ref. RYC2024-050318-I) financed by MICIU/AEI/10.13039/501100011033 and European Social Fund Plus (ESF+). M.C.C. acknowledges the support from Excellence Research Group-Generalitat Valenciana (GVA) Prometeo Programme (NeoHealth ref. PROMETEO2020/12 & Microglocal ref. CIPROM2023/030). This research was carried out with financial support from the projects PID2022-138328OB-C21, PID2021-124017-B-I00, and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF, “A way of making Europe”). IATA members would also like to acknowledge the award granted by the Spanish Government MCIN/AEI to IATA-CSIC as a Severo Ochoa Centre of Excellence (CEX2021-001189-S MCIN/AEI/10.13039/ 501100011033), which has funded the NEMAAR project within the IMPULSA-IATA program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript From seaweed biorefinery residues to functional films: how H₂O₂/UV-assisted pigment removal reshapes polymer networks and material performance [DATASET]

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H₂O₂/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10⁻¹³ kg·m·Pa⁻¹·s⁻¹·m⁻²), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H₂O₂/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PCI2024-153420; European Union's: Sustainable Blue Economy Partnership (SBEP) SBEP2023-39, PRIMA Programme PCI2024-153409, and Severo Ochoa Centre of Excellence: CEX2021-001189-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed