Pasar al contenido principal

APLICACIONES MEDIOAMBIENTALES Y ENERGETICAS DE LA TECNOLOGIA ELECTROQUIMICA FRENTE A LOS RETOS DEL NEXO AGUA-ENERGIA

RED2022-134552-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Cell prototype based on textile electrodes for dyestuff wastewater electrolysis [Dataset], Development and application of an electrolysis cell prototype based on textile electrodes: dyestuff wastewater electrolysis

  • Cases, Francisco|||0000-0001-8105-4489
  • Soler Micó, Ignacio
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Micó-Vicent, B.|||0000-0001-8845-1495
[EN] This research work studies the development of an electrochemical cell prototype based on textile electrodes for treating wastewater via electrochemical processes. The present prototype proposes a system that offers greater efficiency regarding the size/surface of electrodes in electrolysis processes. This prototype enables the treatment of large volumes of dissolution. Moreover, this prototype could surface modify textile electrodes by an electrochemical process in the same cell, specifically, an electrochemically reduced graphene oxide intermediate layer and an outer layer of electrochemically reduced metal nanoparticles are proposed. Surface modification by reduced graphene oxide increase the textile electrode’s stability, conductivity, and specific surface, whilst Pt nanoparticles increase electroactivity. Amaranth was selected to validate the use of this prototype in treating emerging pollutants. This is an azoic dye with a simple structure. Various analytical techniques demonstrate that colour removal takes place with an electrical energy consumption of between 0.29 and 4.66 kWh m−3 (depending on the operational specifications of the electrolysis performed). Once the colour is removed, total organic carbon and chemical oxygen demand decreases by up to 49% and 37%, respectively., This research is part of the Spanish R+D+i contract (TED2021-130905B-I00 funded by MCIN/ AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR”). The authors wish to acknowledge the Spanish AEI Research Network (Contract RED2022-134552-T). Chemviron Carbon, who kindly donated the FlexzorbTM FM10 activated carbon fabrics and Funding for open access charge CRUE-Universitat Politècnica de València, are acknowledged too. The authors are grateful for the English revision by John Rawlins and Tim Vickers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrooxidation of polystyrene nanoplastics by modified Ti-felt electrodes, High surface area modified Ti-felt electrodes for the degradation of polystyrene nanoplastics

  • Cases, Francisco|||0000-0001-8105-4489
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Rodrigo Roca, Rubén
[EN] Ti-felt electrodes with high surface area have been used as supports of electroactive coatings (Pt and SnO₂–Sb–Pt). The electrodes obtained have been employed for the electrochemical oxidation of polystyrene nanoplastics (NPs) (100 nm) in solution. Voltammetric characterization of the electrodes with Ru(NH₃)₆Cl₃ and K₃Fe(CN)₆ redox mediators showed a substantial increase in the redox peaks' current density compared to the boron‑doped diamond electrode. For example, this increase was >68‑fold for the SnO₂–Sb–Pt electrode when using the Ru(NH₃)₆Cl₃ redox mediator. This can be attributed to the enhanced surface area of Ti‑felt, composed of 20 μm diameter fibers, and the roughness of the electrocatalyst coatings. Voltammetric characterization of Ti‑Pt and Ti‑SnO₂–Sb–Pt in 0.03 M Na₂SO₄ media showed an increase in the anodic current density when adding NPs, which would account for a direct mechanism of electrooxidation of the electrode. •OH, S₂O₈²⁻, H₂O₂, and O₃ generation were also determined for both types of electrodes. The degradation of NPs was monitored by fluorescence spectroscopy, taking advantage of the fluorescence of styrene. In addition, it was observed that the dispersion of the second‑order diffraction light (this phenomenon takes place in the diffraction grating of the monochromator) by NPs could also be used to monitor the evolution of the NPs concentration in solution. The electrochemical degradation of polystyrene NPs was faster with SnO₂–Sb–Pt modified Ti‑felt‑based electrodes than with the Pt‑modified one (reaching 90 % degradation in 100 and 210 minutes at 25 mA·cm⁻², respectively). Electrochemical energy consumption per order was also lower for SnO₂–Sb–Pt‑modified electrodes., This research is part of the Spanish R+D+i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for its help with FESEM, EDX, and TEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Surface modification of jute fabrics by rGO-ICP for eco-friendly supercapacitors, Journal of Energy Storage 2023, Surface modification of jute fabrics by reduced graphene oxide-conducting polymer coatings for their application in low-cost and eco-friendly supercapacitors

  • Cases, Francisco|||0000-0001-8105-4489
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
[EN] In this study, flexible textile supercapacitors were obtained on jute fabrics. Insulating jute fibers were converted into electrically conducting using an optimized reduced graphene oxide (rGO) deposition method. Supercapacitors were made of jute fabric and polypyrrole (PPy) as conducting polymer. rGO improved the electrical behavior of PPy-jute supercapacitors obtained by chemical polymerization. These chemical PPy-jute supercapacitors presented a low surface resistivity (6 Ω/sq) suitable for subsequent electrochemical polymerization. The best results were obtained for rGO-PPy-jute supercapacitors synthesized by electrochemical polymerization, with capacitance values of 5127 mF cm-2 (117 F g-1) in a 3-electrode system; and 1770 mF cm-2, 39.9 F g-1, 250 μW h cm-2 and 1100 μW cm-2 in a 2-electrode system. It is essential to highlight that the jute supercapacitors obtained are eco-friendly, low cost, flexible and with very competitive energy-storage values compared to recent investigations., This research is part of the Spanish R + D + i contract PDC2021-121617-C22 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. Electron Microscopy Service of Universitat Politècnica de València is gratefully acknowledged for help with FESEM microscope.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrooxidation of polystyrene nanoplastics by BDD electrodes [Dataset], Influence of the doping level of boron-doped diamond electrodes in the electrooxidation of polystyrene nanoplastics

  • Cases, Francisco|||0000-0001-8105-4489
  • Rodrigo Roca, Rubén
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Muñoz Ortuño, Lucía
[EN] Microplastics and nanoplastics have arisen as contaminants of emerging concern due to the wide use of plastics, and the application of boron-doped diamond (BDD) electrodes for their removal is promising. In this study, we report the influence of BDD doping levels (500, 2500, and 10000 ppm B doping) on the electrooxidation of polystyrene nanoplastics (100 nm, 20 mg⋅L-1). Different current densities (50, 25, 12.5, and 5 mA⋅cm-2) have been applied to determine the best electrolysis conditions for each electrode type. In addition, hydroxyl radical (•OH), persulphate (S2O82-), and hydrogen peroxide (H2O2) reactive species have been determined to understand the influence of the species generated on the degradation of NPs. BDD500 electrode presents the fastest degradation of PS NPs at low current densities (12.5 and 5 mA⋅cm-2), BDD2500 at 25 mA⋅cm-2, and BDD10000 at 50 mA⋅cm-2. Among oxidative species determined, S2O82- is the one generated with the highest concentration and seems to command the degradation of PS NPs, since at 25, 12.5, and 5 mA⋅cm-2, the electrodes that produce more S2O82- degrade faster PS NPs. At 50 mA⋅cm-2, the differences between the different electrodes were minimal. The highest mineralization (as measured by non-purgeable organic carbon measurements) was obtained for BDD500 at 50, 25, and 12.5 mA⋅cm-2, and BDD2500 at 5 mA⋅cm-2., This research is part of the Spanish R +D +i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE- Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for help with TEM and FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrochemical removal of polystyrene nanoplastics in a filter-press reactor using modified Ti-felt anodes [Dataset]

  • Cases, Francisco|||0000-0001-8105-4489
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Rodrigo Roca, Rubén
Ti-felt anodes, with high surface area, have been used as supports of Pt and SnO2-Sb-Pt electrocatalysts. Anodes have been applied in a filter-press electrochemical reactor for the electrooxidation of polystyrene nanoplastics (NPs) (100 mg·L-1). Two types of configurations have been used. In the first, the solution with NPs flows through the anode, taking advantage of its porosity (acting as a sort of membrane) to enhance the contact of NPs with the anode and the oxidative species generated. In the second configuration, the solution of NPs flows parallel to the anode, and the NPs flow parallel to it. Comparing both configurations at 25 mA·cm-2, for the Ti-Pt anode, the flow-through configuration decreases energy consumption by ~7-fold and treatment time by ~15-fold when compared to the flow-by configuration. For Ti-SnO2-Sb-Pt anode, ratios of ~6.5-fold and ~13-fold were obtained, respectively. Moreover, the effect of the current density (50, 25, 12.5, and 5 mA·cm-2) was studied. For the Ti-Pt electrode, a treatment time of only 40 minutes was achieved at a current density of 25 mA·cm-2 with the F-T configuration, with a faradaic efficiency of 62.09 %, and electrochemical energy per order (EEO) of 21.91 kW·h·m-3·order-1. In the case of the F-B configuration at 25 mA·cm-2 the treatment time increases until 600 min, with a faradaic efficiency of 8.27 % and EEO of 156.57 kW·h·m- 3·order-1., This research is part of the Spanish R+D+i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for its help with FESEM, EDX, TEM, and XRM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Electrochemical degradation of Naproxen by carbon paper electrodes coated by RGO and Pt, Naproxen electrooxidation using carbon paper electrodes modified with reduced graphene oxide and platinum nanoparticles

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Olcina Doménech, Laura
This research study investigates the electrooxidation of naproxen (NPX), an anti-inflammatory pharmaceutical, on modified carbon paper (CP) electrodes. Electrochemical modification of CP electrodes was accomplished with Pt or reduced graphene oxide (RGO)-Pt coatings, resulting in the production of electroactive electrodes. RGO coatings synthesized by cyclic voltammetry (CV) for 10 scans provided the optimal coverage for the CP electrode surface. The deposition of Pt nanoparticles (Pt NPs) on the electrodes (CP or CP-RGO) by CV produced a good electrode surface coverage with 20 synthesis scans. The voltammetric analysis of the electrodes in 230 mg/L NPX solution showed oxidation peaks around 1.0 to 1.2 V. Moreover, the inclusion of RGO in the coating led to an increase in the current density of these oxidation peaks and a decrease of the electrode electron transfer resistance as measured by electrochemical impedance spectroscopy. The electrolysis of NPX in different electrolytes (Na2SO4 and Na2SO4/NaCl) was conducted at 1.4 V, and the removal of NPX was analyzed using high-performance liquid chromatography. The CP-RGO-Pt electrode in Na2SO4/NaCl media showed the fastest NPX degradation kinetics, resulting in a 90 % degradation in only 90 min with low charge consumption (0.07 A⋅h⋅L-1). The smaller size of Pt NPs deposited on CP-RGO, as observed by field emission scanning electron microscopy and transmission electron microscopy, contributed to the higher electrochemical response in CV and a faster kinetic degradation of NPX., This research is part of the Spanish R + D + i contract TED2021-130905B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigaci´on de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE Universitat Polit`ecnica de Val`encia. The Electron Microscopy Service of the UPV (Universitat Polit`ecnica de Val`encia) is gratefully acknowledged for help with FESEM and EDX characterization.