Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Nanostructured direct electron transfer based biocathodes for applications in biofuel cells

  • Di Bari, Chiara
During the last years biofuel fuel cells (BFCs) have attracted great interest due to their possible applications, especially as electrical power sources for in vivo or ex vivo applications. In BFCs enzymes can be used as biocatalysts for fuel oxidation at the anode and oxidant reduction at the cathode. The majority of EFCs use oxygen-reducing enzymes at the cathode, and glucose-oxidizing enzymes at the anode, as they are very common substrates present in most human physiological fluids. Two multi-copper oxidases, laccase and bilirubin oxidase, and cellobiose dehydrogenase have been studied as possible biocatalysts for the oxygen reduction reaction and glucose oxidation, respectively. Laccases usually exhibit higher activity at acid pH and they are more inhibited in the presence of chloride ions than bilirubin oxidase. Therefore, native laccases have been engineered by directed evolution for obtaining mutants that show activity also under physiological conditions, and cysteine residues have been introduced by site-directed mutagenesis for oriented immobilization on gold electrodes. The major aim of the Thesis has been the development of biocathodes as they represent the rate-limiting part of the BFC due to the low O2 availability in human body. The development of the bioelectrodes was carried out paying special attention to the different electrode materials and immobilization strategies used to manufacture the biodevices. Indeed, a good immobilization strategy enhances the long-term stability of the biodevice while achieving efficient wiring of the enzyme. Additionally, a larger surface area of the support material allows higher enzyme loading, therefore increasing the current density developed. Gold nanorods, macroporous gold, indium tin oxide and carbonaceous materials have been used for this purpose, obtaining current densities up to 1.5 mA/cm2 for bioelectrocatalytic O2 reduction. Direct electron transfer (DET) based systems are preferred as some possible drawbacks of using mediators are overcome and allow making the miniaturization of the BFC easier. For these reason, all the immobilization strategies presented were developed in order to optimize DET between the enzyme and the electrode surface. Combination of a conventional BFC with electrochemical capacitors is also presented in order to overcome the limitations of both systems, achieving a maximum power output of 0.6 µW at an operating voltage of 0.15 V. This hybrid biodevice was also tested in ex vivo conditions by connecting it directly to the dorsal venous of a human volunteer., European Commission for their financial support through BIOENERGY project, under the 7th framework ITN Marie Curie program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Directed and computational evolution of fungal laccases: redox potential enhancement and development of a family of thermostable chimeras

  • Mateljak, Ivan
[EN] Fungal laccases are multicopper oxidases with a broad substrate specificity that is highly dependent on their redox potential of the T1Cu site (ET1). High-redox potential laccases (HRPLs) secreted by basidiomycete white rot fungi are particularly relevant in a biotechnological context given their capacity to oxidize compounds with a higher redox potential that cannot be transformed by their medium- and low-redox potential counterparts. In the first section of this Thesis, we combined computational design with directed evolution in order to tailor a HRPL variant with improved ET1 and activity towards high-redox potential mediators, as well as enhanced stability. Laccase mutant libraries were screened in vitro using high-redox potential mediators with different chemical nature, while computer-aided evolution experiments were run in parallel to guide bench-top mutagenesis. Through this strategy, the ET1 of the evolved HRPL increased from 740 mV to 790 mV, with a concomitant improvement in thermal and acidic pH stability. The kinetic parameters for high-redox potential mediators were markedly enhanced, which were then successfully tested within laccase mediator systems (LMS). Two hydrophobic substitutions surrounding the T1Cu site appeared to underlie these effects and they were rationalized at the atomic level. Due to its complex structural organization, the generation of chimeric laccases with high sequence diversity from different orthologs is difficult to achieve without compromising protein functionality. In the second section of this Thesis, using SCHEMA-RASPP structure-guided recombination in vivo, we obtained a diverse family of functional chimeras showing increased thermostability from three fungal laccase orthologs with 70 % protein sequence identity and varied redox potential. Assisted by the high frequency of homologous DNA recombination in Saccharomyces cerevisiae, computational SCHEMA blocks were spliced and cloned in a one-pot transformation. As a result of this in vivo assembly, an enriched library of laccase chimeras was rapidly generated and it was screened at high temperature. The collection of chimeras showed considerable sequence diversity, on average varying from their closest parent homolog in 46 amino acids. The most thermostable variant increased its half-life of thermal inactivation at 70°C 5-fold (up to 108 min), whereas several chimeras also displayed improved stability at acid pH., Peer reviewed