Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

The influence of the shape of Au nanoparticles on the catalyticcurrent of fructose dehydrogenase

  • Bollella, Paolo
  • Hibino, Yuya
  • Conejo Valverde, Paolo
  • Soto Cruz, Jackeline
  • Bergueiro, Julián
  • Calderón, Marcelo
  • Rojas Carrillo, Oscar
  • Kano, Kenji
  • Gorton, Lo
Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer-limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer-limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (k(S)) were found to be 3.8 +/- 0.3 s(-1) and 0.9 +/- 0.1 s(-1), for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface, This study received financial funding from the Swedish Research Council (Vetenskapsradet project 2014-5908), the European Commission (project "Bioenergy" FP7-PEOPLE-2013-ITN-607793), and a scholarship of the Erasmus+ Project Unipharma-Graduates, promoted by a Consortium of Italian Universities and coordinated by Sapienza University of Rome.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laccase-modified gold nanorods for electrocatalytic reduction of oxygen

  • Di Bari, Chiara
  • Shleev, Sergey
  • López de Lacey, Antonio
  • Pita, Marcos
The multicopper oxidase Trametes hirsuta laccase (ThLc) served as a bioelectrocatalyst on nanostructured cathodes. Nanostructuring was provided by gold nanorods (AuNRs), which were characterized and covalently attached to electrodes made of low-density graphite. The nanostructured electrode was the scaffold for covalent and oriented attachment of ThLc. The bioelectrocatalytic currents measured for oxygen reductionwere as high as 0.5 mA/cm2 and 0.7 mA/cm2, which were recorded under direct and mediated electron transfer regimes, respectively. The experimental data were fitted to mathematical models showing that when the O2 is bioelectroreduced at high rotation speed of the electrode the heterogeneous electron transfer step is the rateliming stage. The electrochemical measurement hints a wider population of non-optimally wired laccases than previously reported for 5-8 nmsize Au nanoparticle-modified electrode, which could be due to a larger size of the AuNRs when compared to the laccases as well as their different crystal facets. © 2015 Elsevier B.V., This work was funded by the Seventh Framework Programme (BIOENERGY FP7-PEOPLE-2013-607793 project)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of high surface area graphene electrodes with high performance towards enzymatic oxygen reduction

  • Di Bari, Chiara
  • Goñi-Urtiaga, Asier
  • Pita, Marcos
  • Shleev, Sergey
  • Toscano, Miguel D.
  • Sainz, Raquel
  • López de Lacey, Antonio
High surface area graphene electrodes were prepared by simultaneous electrodeposition and electroreduction of graphene oxide. The electrodeposition process was optimized in terms of pH and conductivity of the solution and the obtained graphene electrodes were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and electrochemical methods (cyclic voltammetry and impedance spectroscopy). Electrodeposited electrodes were further functionalized to carry out covalent immobilization of two oxygen-reducing multicopper oxidases: laccase and bilirubin oxidase. The enzymatic electrodes were tested as direct electron transfer based biocathodes and catalytic currents as high as 1 mA/cm2 were obtained. Finally, the mechanism of the enzymatic oxygen reduction reaction was studied for both enzymes calculating the Tafel slopes and transfer coefficients., This work has received funding from the European Union’s Seventh Framework Programme under grant agreement BIOENERGY, FP7-PEOPLE-2013-ITN-607793., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paper-based microfluidic biofuel cell operating under glucose concentrations within physiological range

  • González-Guerrero, Maria Jose
  • Campo García, Francisco Javier del
  • Esquivel Bojórquez, Juan Pablo
  • Leech, Donal
  • Sabaté Vizcarra, Neus
This work addresses the development of a compact paper-based enzymatic microfluidic glucose/O2 fuel cell that can operate using a very limited sample volume (≈35 µl) and explores the energy generated by glucose at concentrations typically found in blood samples at physiological conditions (pH 7.4). Carbon paper electrodes combined with a paper sample absorption substrate all contained within a plastic microfluidic casing are used to construct the paper-based fuel cell. The anode catalysts consist of glucose dehydrogenase and [Os(4,4′-dimethoxy-2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator, while the cathode catalysts were bilirubin oxidase and [Os(2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator. The fuel cell delivered a linear power output response to glucose over the range of 2.5–30 mM, with power densities ranging from 20 to 90 µW cm−2. The quantification of the available electrical power as well as the energy density extracted from small synthetic samples allows planning potential uses of this energy to power different sensors and analysis devices in a wide variety of in-vitro applications., Peter Ó Conghaile is thanked for synthesis of the redox polymers. Neus Sabaté acknowledges funding from the European H2020 Framework Programme (Grant Agreement 648518 - SUPERCELL - ERC 2014 CoG). Juan Pablo Esquivel would like to thank the support from Marie Curie International Outgoing Fellowship (APPOCS) within the 7th European Community Framework Programme. F. Javier del Campo acknowledges funding from the Spanish Ministry of Economy through the DADDi2 project (TEC2013-48506-C3). Dónal Leech acknowledges support from Grant number 607793 under the Bioenergy FP7-PEOPLE-2013-ITN Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laccase-Catalyzed Bioelectrochemical Oxidation of Water Assisted with Visible Light

  • Tapia, Cristina
  • Shleev, Sergey
  • Conesa Cegarra, José Carlos
  • López de Lacey, Antonio
  • Pita, Marcos
Here we present the modification of fluorinated tin oxide electrodes with In2S3, an n-type semiconductor chalcogenide that absorbs visible light (λ ≤600 nm), and its further use as an active scaffold for laccase-catalyzed oxidation of water. Illumination of an FTO-In2S3- laccase electrode yields O2 production at much lower applied potential in comparison to the previous example using the same laccase, where only electric energy was applied. The present system allows a diversification of the energy applied to accomplish the water splitting, taking a portion of it from the sun. This work is the first example where an enzyme other than PSII has been used in combination with visible light to biocatalyze O2 evolution., This work was funded by the Spanish MINECO/FEDER projects CTQ2015-71290-R and ENE2013-46624-C4-1-R, by the CSIC PIE 201560I018 project, and by the European Commission project “Bioenergy” FP7-PEOPLE-2013-ITN-607793. A scholarship for C.T. was funded by the Spanish MINECO contract BES-2013-064099., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wiring of Photosystem I and Hydrogenase on an Electrode for Photoelectrochemical H2 Production by using Redox Polymers for Relatively Positive Onset Potential

  • Tapia, Cristina
  • Milton, Ross D.
  • Pankratova, Galina
  • Minteer, Shelley
  • Åkerlund, Hans-Erik
  • Leech, Donal
  • López de Lacey, Antonio
  • Pita, Marcos
Photosystem I (PSI) is combined with Desulfovibrio gigas hydrogenase for the bioelectrocatalytic photosynthesis of hydrogen at an electrode surface. The activity of these two biocatalysts is linked by two redox polymers; a redox polymer with a relatively positive potential (loaded with an Os complex) is able to reduce PSI and thus facilitates the production of photoexcited electrons, whereas redox polymers of relatively low potential are able to transfer electrons to the hydrogenase. Two negative‐potential redox polymers are tested, with either a viologen pendant (4‐methyl‐4′‐bromopropylviologen functionalized linear polyethylenimine) or a cobaltocene pendant (cobaltocene‐functionalized branched polyethylenimine, Cc‐BPEI). Both are able to protect hydrogenase from O2 inactivation, but only the use of Cc‐BPEI yields significant photocurrents for H+ reduction, likely due to its lower redox potential. The photocurrents obtained are found to be proportional to the quantity of H2 produced, reaching a maximum of −30 μA cm−2 for the system incorporating Cc‐BPEI and showing a relatively positive onset potential at +0.38 V versus SHE., The authors thank the following agencies for financial support: The European Commission project “Bioenergy” FP7‐PEOPLE‐2013‐ITN‐607793, the Swedish Research Council project 2014‐5908, and the Spanish MINECO project CTQ2015‐71290‐R. C.T. thanks the Spanish MINECO for her BES‐2013‐064099 contract and EEBB‐I‐16‐11240 grant. R.D.M., S.D.M., and D.L. acknowledge funding from a Marie Curie‐Skłodowska Individual Fellowship (Global) under the European Commission's Horizon 2020 Framework (project 654836, “Bioelectroammonia”). S.D.M. thanks the Air Force Office of Scientific Research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Third-generation oxygen amperometric biosensor based on Trametes hirsuta laccase covalently bound to graphite electrode

  • Gutiérrez-Sánchez, Cristina
  • Shleev, Sergey
  • López de Lacey, Antonio
  • Pita, Marcos
The response of low-density graphite electrodes hosting Trametes hirsuta laccase in a direct electron transfer regime is presented for real-time analysis of O2 concentrations. The use of contrasting immobilisation methods developed for biocathodes affords good reproducibility and reliability of the amperometric biosensor, which shows a limit of detection below 1 μM and a sensitivity slightly higher than 60 nA cm−2 M−1., This work was funded by the FP7 project FP7-PEOPLE-2013-ITN-607793, MINECO-CTQ2012- 32448. M.P. wishes to acknowledge assistance received from the 2009 Ramon y Cajal programme from the Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of Redox Enzymes on Nanoporous Gold Electrodes: Applications in Biofuel Cells

  • Siepenkoetter, Till
  • Salaj‐Kosla, Urszula
  • Xiao, Xinxin
  • Ó Conghaile, Peter
  • Pita, Marcos
  • Ludwig, Roland
  • Magner, Edmond
Nanoporous gold (NPG) electrodes were prepared by dealloying sputtered gold:silver alloys. Electrodes of different thicknesses and pore sizes areas were prepared by varying the temperature and duration of the dealloying procedure; these were then used as supports for FAD‐dependent glucose dehydrogenase (GDH) (Glomorella cingulata) and bilirubin oxidase (BOx) (Myrothecium verrucaria). Glucose dehydrogenase was immobilized by drop‐casting a solution of the enzyme with an osmium redox polymer together with a crosslinked polymer, whereas bilirubin oxidase was attached covalently through carbodiimide coupling to a diazonium‐modified NPG electrode. The stability of the bilirubin‐oxidase‐modified NPG electrode was significantly improved in comparison with that of a planar gold electrode. Enzyme fuel cells were also prepared; the optimal response was obtained with a BOx‐modified NPG cathode (500 nm thickness) and a GDH‐modified anode (300 nm), which generated power densities of 17.5 and 7.0 μW cm−2 in phosphate‐buffered saline and artificial serum, respectively., This project has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no. 607793 (BIOENERGY)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Cu-doped graphene on the flammability and thermal properties of epoxy composites

  • Liu, Yun
  • Babu, Heeralal Vignesh
  • Zhao, Jianqing
  • Goñi-Urtiaga, Asier
  • Sainz, Raquel
  • Ferritto, Rafael
  • Pita, Marcos
  • Wang, De-Yi
Cu-doped graphene (graphenit-Cu) was successfully prepared through chemical reduction method, and its surface morphology, crystalline structure and Cu content in graphenit-Cu were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), inductive couple plasma (ICP) and electrochemical cyclic voltammetry, respectively. Graphenit-ox/epoxy systems and graphenit-Cu/epoxy systems were prepared, and the contents of graphenit-ox and graphenit-Cu were kept as 1 and 3 wt%, respectively. The effect of graphenit-ox or graphenit-Cu on the flame retardancy, combustion properties, thermal degradation and thermomechanical properties of epoxy resin was investigated systematically by limiting oxygen index (LOI), cone calorimeter (Cone), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Compared to graphenit-ox, the addition of graphenit-Cu reduced the heat release rate (HRR), total smoke production (TSP) and smoke production rate (SPR), and improved LOI values of epoxy composites. Moreover, the addition of graphenit-ox also had little flame retardant effect on epoxy composite. The possible synergistic effect between graphene and Cu was confirmed in the flame retardant epoxy composites. TGA and DMA results also indicated the considerable effect on the thermal degradation and thermomechanical properties of epoxy composites with the addition of graphenit-Cu. The results supplied an effective solution for developing excellent flame retardant epoxy composites., The authors acknowledged the financial support of China Scholarship Council (CSC: 201308420380), National Natural Science Foundation of China (Grant No. U1201243) and the European Union's Seventh Framework Program for Research, Technological Development and Demonstration (607793). This research is also partly supported by Spanish Ministry of Economy and Competitiveness (MINECO) under Ramón y Cajal grant (RYC-2012-10737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Halides inhibition of multicopper oxidases studied by FTIR spectroelectrochemistry using azide as an active infrared probe

  • Di Bari, Chiara
  • Mano, Nicolas
  • Shleev, Sergey
  • Pita, Marcos
  • López de Lacey, Antonio
An infrared spectroelectrochemical study of Trametes hirsuta laccase and Magnaporthe oryzae bilirubin oxidase has been performed using azide, an inhibitor of multicopper oxidases, as an active infrared probe incorporated into the T2/T3 copper cluster of the enzymes. The redox potential-controlled measurements indicate that N3 − stretching IR bands of azide ion bound to the T2/T3 cluster are only detected for the oxidized enzymes, confirming that azide only binds to Cu2+. Moreover, the process of binding/dissociation of azide ion is shown to be reversible. The interaction of halide anions, which also inhibit multicopper oxidases, with the active site of the enzymes was studied by measuring the changes in the azide FTIR bands. Enzymes inhibited by azide respond differently upon addition of fluoride or chloride ions to the sample solution inhibited by azide. Fluoride ions compete with azide for binding at one of the T2/T3 Cu ions, whereas competition from chloride ions is much less evident., This project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under Grant agreement BIOENERGY FP7-PEOPLE-2013-607793., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-Dimensional Graphene Matrix-Supported and Thylakoid Membrane-Based High-Performance Bioelectrochemical Solar Cell

  • Pankratova, Galina
  • Pankratov, Dimitry
  • Di Bari, Chiara
  • Goñi-Urtiaga, Asier
  • Toscano, Miguel D.
  • Chi, Qijin
  • Pita, Marcos
  • Gorton, Lo
  • López de Lacey, Antonio
A combination of thylakoid membranes (TMs) as photobiocatalysts with high-surface-area electroactive materials could hold great potential for sustainable “green” solar energy conversion. We have studied the orientated immobilization of TMs on high-surface-area graphene electrodes, which were fabricated by electroreduction of graphene oxide and simultaneous electrodeposition with further aminoaryl functionalization. We have achieved the highest performance to date under direct electron transfer conditions through a biocompatible “wiring” of TMs to graphene sheets. The photobiocurrent density generated by the optimized mediator-free TM-based bioanodes yielded up to 5.24 ± 0.50 μA cm–2. The photobioelectrochemical cell integrating the photobioanode in combination with an oxygen reducing enzymatic biocathode delivered a maximum power output of 1.79 ± 0.19 μW cm–2. Our approach ensures a simplified cell design, a greater load of photosynthetic units, a minimized overpotential loss, and an enhanced overall performance., The authors thank the following agencies for financial support: the European Commission (”Bioenergy” FP7-PEOPLE-2013-ITN-607793), the Ørsted-COFUND Postdoc fellowship at DTU (Agreement No. 2014-5908), and the Swedish Research Council (project 2014-5908), and Independent Research Fund Denmark-Nature Sciences (DFF-FNU, Project No. DFF-7014-00302)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Nanostructured direct electron transfer based biocathodes for applications in biofuel cells

  • Di Bari, Chiara
During the last years biofuel fuel cells (BFCs) have attracted great interest due to their possible applications, especially as electrical power sources for in vivo or ex vivo applications. In BFCs enzymes can be used as biocatalysts for fuel oxidation at the anode and oxidant reduction at the cathode. The majority of EFCs use oxygen-reducing enzymes at the cathode, and glucose-oxidizing enzymes at the anode, as they are very common substrates present in most human physiological fluids. Two multi-copper oxidases, laccase and bilirubin oxidase, and cellobiose dehydrogenase have been studied as possible biocatalysts for the oxygen reduction reaction and glucose oxidation, respectively. Laccases usually exhibit higher activity at acid pH and they are more inhibited in the presence of chloride ions than bilirubin oxidase. Therefore, native laccases have been engineered by directed evolution for obtaining mutants that show activity also under physiological conditions, and cysteine residues have been introduced by site-directed mutagenesis for oriented immobilization on gold electrodes. The major aim of the Thesis has been the development of biocathodes as they represent the rate-limiting part of the BFC due to the low O2 availability in human body. The development of the bioelectrodes was carried out paying special attention to the different electrode materials and immobilization strategies used to manufacture the biodevices. Indeed, a good immobilization strategy enhances the long-term stability of the biodevice while achieving efficient wiring of the enzyme. Additionally, a larger surface area of the support material allows higher enzyme loading, therefore increasing the current density developed. Gold nanorods, macroporous gold, indium tin oxide and carbonaceous materials have been used for this purpose, obtaining current densities up to 1.5 mA/cm2 for bioelectrocatalytic O2 reduction. Direct electron transfer (DET) based systems are preferred as some possible drawbacks of using mediators are overcome and allow making the miniaturization of the BFC easier. For these reason, all the immobilization strategies presented were developed in order to optimize DET between the enzyme and the electrode surface. Combination of a conventional BFC with electrochemical capacitors is also presented in order to overcome the limitations of both systems, achieving a maximum power output of 0.6 µW at an operating voltage of 0.15 V. This hybrid biodevice was also tested in ex vivo conditions by connecting it directly to the dorsal venous of a human volunteer., European Commission for their financial support through BIOENERGY project, under the 7th framework ITN Marie Curie program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolved α‐factor prepro‐leaders for directed laccase evolution in Saccharomyces cerevisiae

  • Mateljak, Ivan
  • Tron, Thierry
  • Alcalde Galeote, Miguel
Special Issue: Thematic Issue: From complex waste to plastic value., Although the functional expression of fungal laccases in Saccharomyces cerevisiae has proven to be complicated, the replacement of signal peptides appears to be a suitable approach to enhance secretion in directed evolution experiments. In this study, twelve constructs were prepared by fusing native and evolved α‐factor prepro‐leaders from S. cerevisiae to four different laccases with low‐, medium‐ and high‐redox potential (PM1L from basidiomycete PM1; PcL from Pycnoporus cinnabarinus; TspC30L from Trametes sp. strain C30; and MtL from Myceliophthora thermophila). Microcultures of the prepro‐leader:laccase fusions were grown in selective expression medium that used galactose as both the sole carbon source and as the inducer of expression so that the secretion and activity were assessed with low‐ and high‐redox potential mediators in a high‐throughput screening context. With total activity improvements as high as sevenfold over those obtained with the native α‐factor prepro‐leader, the evolved prepro‐leader from PcL (αPcL) most strongly enhanced secretion of the high‐ and medium‐redox potential laccases PcL, PM1L and TspC30L in the microtiter format with an expression pattern driven by prepro‐leaders in the order αPcL > αPM1L ~ αnative. By contrast, the pattern of the low‐redox potential MtL was αnative > αPcL > αPM1L. When produced in flask with rich medium, the evolved prepro‐leaders outperformed the αnative signal peptide irrespective of the laccase attached, enhancing secretion over 50‐fold. Together, these results highlight the importance of using evolved α‐factor prepro‐leaders for functional expression of fungal laccases in directed evolution campaigns., This work was supported by the European Union projects (Bioenergy‐FP7‐PEOPLE‐2013‐ITN‐607793; H2020‐BBI‐PPP‐2015‐2‐720297‐ENZOX2) the COST Action [CM1303 Systems Biocatalysis] and the Spanish Government [BIO2016‐79106‐R‐Lignolution]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laccase: a multi‐purpose biocatalyst at the forefront of biotechnology

  • Maté, Diana M.
  • Alcalde Galeote, Miguel
Special Issue: Thematic Issue: From complex waste to plastic value., Laccases are multicopper containing enzymes capable of performing one electron oxidation of a broad range of substrates. Using molecular oxygen as the final electron acceptor, they release only water as a by‐product, and as such, laccases are eco‐friendly, versatile biocatalysts that have generated an enormous biotechnological interest. Indeed, this group of enzymes has been used in different industrial fields for very diverse purposes, from food additive and beverage processing to biomedical diagnosis, and as cross‐linking agents for furniture construction or in the production of biofuels. Laccases have also been studied intensely in nanobiotechnology for the development of implantable biosensors and biofuel cells. Moreover, their capacity to transform complex xenobiotics makes them useful biocatalysts in enzymatic bioremediation. This review summarizes the most significant recent advances in the use of laccases and their future perspectives in biotechnology., We recognize the much appreciated financial support of the EU (projects FP7‐KBBE‐2013‐7‐613549‐INDOX, FP7‐People‐2013‐ITN‐607793 and COST Action CM1303 Systems Biocatalysis) and the Spanish Government (BIO2013‐43407‐R‐DEWRY)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond the outer limits of nature by directed evolution

  • Molina-Espeja, Patricia
  • Gómez-Fernández, Bernardo J.
  • Martín-Díaz, Javier
  • García-Ruiz, Eva
  • Alcalde Galeote, Miguel
For more than thirty years, biotechnology has borne witness to the power of directed evolution in designing molecules of industrial relevance. While scientists all over the world discuss the future of molecular evolution, dozens of laboratory-designed products are being released with improved characteristics in terms of turnover rates, substrate scope, catalytic promiscuity or stability. In this review we aim to present the most recent advances in this fascinating research field that are allowing us to surpass the limits of nature and apply newly gained attributes to a range of applications, from gene therapy to novel green processes. The use of directed evolution in non-natural environments, the generation of catalytic promiscuity for non-natural reactions, the insertion of unnatural amino acids into proteins or the creation of unnatural DNA, is described comprehensively, together with the potential applications in bioremediation, biomedicine and in the generation of new bionanomaterials. These successful case studies show us that the limits of directed evolution will be defined by our own imagination, and in some cases, stretching beyond that., The laboratory of MA gratefully acknowledges the financial support received from the EU (FP7-KBBE-2013-7-613549-INDOX, FP7-People-2013-ITN-607793 and COST-Action CM1303 Systems Biocatalysis) and the Spanish Government (BIO2010-19697-EVOFACEL, BIO2013-43407-R-DEWRY and CAMBIOS-RTC-2014-1777-3) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tandem-yeast expression system for engineering and producing unspecific peroxygenase

  • Molina-Espeja, Patricia
  • Ma, S
  • Maté, Diana M.
  • Ludwig, Roland
  • Alcalde Galeote, Miguel
Unspecific peroxygenase (UPO) is a highly efficient biocatalyst with a peroxide dependent monooxygenase activity and many biotechnological applications, but the absence of suitable heterologous expression systems has precluded its use in different industrial settings. Recently, the UPO from Agrocybe aegerita was evolved for secretion and activity in Saccharomyces cerevisiae [8]. In the current work, we describe a tandem-yeast expression system for UPO engineering and large scale production. By harnessing the directed evolution process in S. cerevisiae, the beneficial mutations for secretion enabled Pichia pastoris to express the evolved UPO under the control of the methanol inducible alcohol oxidase 1 promoter. Whilst secretion levels were found similar for both yeasts in flask fermentation (~8. mg/L), the recombinant UPO from P. pastoris showed a 27-fold enhanced production in fed-batch fermentation (217. mg/L). The P. pastoris UPO variant maintained similar biochemical properties of the S. cerevisiae counterpart in terms of catalytic constants, pH activity profiles and thermostability. Thus, this tandem-yeast expression system ensures the engineering of UPOs to use them in future industrial applications as well as large scale production., EU (FP7-KBBE-2013-7-613549-INDOX, FP7-People-2013-ITN-607793, COST-Action CM1303 Systems Biocatalysis) and the Spanish Government (BIO2010-19697-EVOFACEL, BIO2013-43407-R-DEWRY and CAMBIOS-RTC-2014-1777-3 projects)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The generation of thermostable fungal laccase chimeras by SCHEMA-RASPP structure-guided recombination in vivo

  • Mateljak, Ivan
  • Rice, Austin
  • Tron, Thierry
  • Alcalde Galeote, Miguel
Fungal laccases are biotechnologically relevant enzymes that are capable of oxidizing a wide array of compounds, using oxygen from the air and releasing water as the only by product. The laccase structure is comprised of three cupredoxin domains sheltering two copper centers -the T1Cu site and the T2/T3 trinuclear Cu cluster- connected to each other through a highly conserved internal electron transfer pathway. As such, the generation of laccase chimeras with high sequence diversity from different orthologs is difficult to achieve without compromising protein functionality. Here, we have obtained a diverse family of functional chimeras showing increased thermostability from three fungal laccase orthologs with 70 % protein sequence identity. Assisted by the high frequency of homologous DNA recombination in Saccharomyces cerevisiae, computationally selected SCHEMA-RASSP blocks were spliced and cloned in a one-pot transformation. As a result of this in vivo assembly, an enriched library of laccase chimeras was rapidly generated, with multiple recombination events simultaneously occurring between and within the SCHEMA blocks. The resulting library was screened at high temperature identifying a collection of thermostable chimeras with considerable sequence diversity which varied from their closest parent homolog by 46 amino acids on average. The most thermostable variant increased its half-life of thermal inactivation at 70°C 5-fold (up to 108 min), whereas several chimeras also displayed improved stability at acidic pH. The two catalytic copper sites spanned different SCHEMA blocks, shedding light on the recognition of specific residues involved in substrate oxidation. In summary, this case-study through comparison with previous laccase engineering studies, highlights the benefits of bringing together computationally-guided recombination and in vivo shuffling as an invaluable strategy for laccase evolution, which can be translated to other enzyme systems., This work was funded by the European Union [(Bioenergy-FP7-PEOPLE-2013-ITN-607793], the CSIC [project PIE-201580E042], and the Spanish Ministry of Economy, Industry and Competitiveness [projects BIO2013-43407-R.DEWRY and BIO2016-79106-R. LIGNOLUTION]., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering the ligninolytic enzyme consortium

  • Alcalde Galeote, Miguel
The ligninolytic enzyme consortium is one of the most-efficient oxidative systems found in nature, playing a pivotal role during wood decay and coal formation. Typically formed by high redox-potential oxidoreductases, this array of enzymes can be used within the emerging lignocellulose biorefineries in processes that range from the production of bioenergy to that of biomaterials. To ensure that these versatile enzymes meet industry standards and needs, they have been subjected to directed evolution and hybrid approaches that surpass the limits imposed by nature. This Opinion article analyzes recent achievements in this field, including the incipient groundbreaking research into the evolution of resurrected enzymes, and the engineering of ligninolytic secretomes to create consolidated bioprocessing microbes with synthetic biology applications., This work was supported by the European Commission projects Indox-FP7-KBBE-2013-7-613549; Bioenergy-FP7-PEOPLE-2013-ITN-607793; Cost Action CM1303 Systems Biocatalysis; and the National projects Evofacel (BIO2010-19697), Dewry (BIO201343407-R], and Cambios (RTC-2014-1777-3)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Directed and computational evolution of fungal laccases: redox potential enhancement and development of a family of thermostable chimeras

  • Mateljak, Ivan
[EN] Fungal laccases are multicopper oxidases with a broad substrate specificity that is highly dependent on their redox potential of the T1Cu site (ET1). High-redox potential laccases (HRPLs) secreted by basidiomycete white rot fungi are particularly relevant in a biotechnological context given their capacity to oxidize compounds with a higher redox potential that cannot be transformed by their medium- and low-redox potential counterparts. In the first section of this Thesis, we combined computational design with directed evolution in order to tailor a HRPL variant with improved ET1 and activity towards high-redox potential mediators, as well as enhanced stability. Laccase mutant libraries were screened in vitro using high-redox potential mediators with different chemical nature, while computer-aided evolution experiments were run in parallel to guide bench-top mutagenesis. Through this strategy, the ET1 of the evolved HRPL increased from 740 mV to 790 mV, with a concomitant improvement in thermal and acidic pH stability. The kinetic parameters for high-redox potential mediators were markedly enhanced, which were then successfully tested within laccase mediator systems (LMS). Two hydrophobic substitutions surrounding the T1Cu site appeared to underlie these effects and they were rationalized at the atomic level. Due to its complex structural organization, the generation of chimeric laccases with high sequence diversity from different orthologs is difficult to achieve without compromising protein functionality. In the second section of this Thesis, using SCHEMA-RASPP structure-guided recombination in vivo, we obtained a diverse family of functional chimeras showing increased thermostability from three fungal laccase orthologs with 70 % protein sequence identity and varied redox potential. Assisted by the high frequency of homologous DNA recombination in Saccharomyces cerevisiae, computational SCHEMA blocks were spliced and cloned in a one-pot transformation. As a result of this in vivo assembly, an enriched library of laccase chimeras was rapidly generated and it was screened at high temperature. The collection of chimeras showed considerable sequence diversity, on average varying from their closest parent homolog in 46 amino acids. The most thermostable variant increased its half-life of thermal inactivation at 70°C 5-fold (up to 108 min), whereas several chimeras also displayed improved stability at acid pH., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing Redox Potential, Redox Mediator Activity, and Stability in a Fungal Laccase by Computer-Guided Mutagenesis and Directed Evolution

  • Mateljak, Ivan
  • Monza, Emanuele
  • Lucas, Fátima
  • Guallar, Victor
  • Aleksejeva, Olga
  • Ludwig, Roland
  • Leech, Donal
  • Shleev, Sergey
  • Alcalde Galeote, Miguel
Fungal high-redox-potential laccases (HRPLs) are multicopper oxidases with a relaxed substrate specificity that is highly dependent on their binding affinity and redox potential of the T1Cu site (ET1). In this study, we combined computational design with directed evolution to tailor an HRPL variant with increased ET1 and activity toward high-redox-potential mediators as well as enhanced stability. Laccase mutant libraries were screened in vitro using synthetic high-redox-potential mediators with different oxidation routes and chemical natures, while computer-aided evolution experiments were run in parallel to guide benchtop mutagenesis, without compromising protein stability. Through this strategy, the ET1 of the evolved HRPL increased from 740 to 790 mV, with a concomitant improvement in thermal and acidic pH stability. The kinetic constants for high-redox-potential mediators were markedly improved and were then successfully tested within laccase mediator systems (LMSs). Two hydrophobic substitutions surrounding the T1Cu site appeared to underlie these effects, and they were rationalized at the atomic level. Together, this study represents a proof-of-concept of the joint elevation of the ET1, redox mediator activity, and stability in an HRPL, making this versatile biocatalyst a promising candidate for future LMS applications and for the development of bioelectrochemical devices., This work was supported by the European Union project Bioenergy-FP7-PEOPLE-2013-ITN-607793, the COST Action [CM1303 Systems Biocatalysis],the Swedish Energy Agency (44707-1), the Knowledge Foundation (20170168), and the Spanish Government [BIO2016-79106-R-Lignolution and CTQ2016-79138-R]., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).