Pasar al contenido principal

DISPOSITIVO AUTONOMO DESECHABLE PARA EL DIAGNOSTICO DE LA DIABETES

TEC2013-48506-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paper-based enzymatic microfluidic fuel cell: From a two-stream flow device to a single-stream lateral flow strip

  • González-Guerrero, Maria Jose
  • Campo García, Francisco Javier del
  • Esquivel Bojórquez, Juan Pablo
  • Giroud, Fabien
  • Minteer, Shelley
  • Sabaté Vizcarra, Neus
This work presents a first approach towards the development of a cost-effective enzymatic paper-based glucose/O2 microfluidic fuel cell in which fluid transport is based on capillary action. A first fuel cell configuration consists of a Y-shaped paper device with the fuel and the oxidant flowing in parallel over carbon paper electrodes modified with bioelectrocatalytic enzymes. The anode consists of a ferrocenium-based polyethyleneimine polymer linked to glucose oxidase (GOx/Fc-C6-LPEI), while the cathode contains a mixture of laccase, anthracene-modified multiwall carbon nanotubes, and tetrabutylammonium bromide-modified Nafion (MWCNTs/laccase/TBAB-Nafion). Subsequently, the Y-shaped configuration is improved to use a single solution containing both, the anolyte and the catholyte. Thus, the electrolytes pHs of the fuel and the oxidant solutions are adapted to an intermediate pH of 5.5. Finally, the fuel cell is run with this single solution obtaining a maximum open circuit of 0.55 ± 0.04 V and a maximum current and power density of 225 ± 17 μA cm−2 and 24 ± 5 μW cm−2, respectively. Hence, a power source closer to a commercial application (similar to conventional lateral flow test strips) is developed and successfully operated. This system can be used to supply the energy required to power microelectronics demanding low power consumption., F. Javier del Campo acknowledges funding from the Spanish Ministry of Economy through the DADDi2 project (TEC2013-48506-C3). Juan Pablo Esquivel would like to thank the support from Marie Curie International Outgoing Fellowship (APPOCS-328144) within the 7th European Community Framework Programme. Shelley D. Minteer and Fabien Giroud would like to thank the National Science Foundation (CHE-1057597) for funding. Neus Sabaté acknowledges funding from the European H2020 Framework Programme (Grant Agreement 648518 - SUPERCELL - ERC 2014 CoG)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paper-based microfluidic biofuel cell operating under glucose concentrations within physiological range

  • González-Guerrero, Maria Jose
  • Campo García, Francisco Javier del
  • Esquivel Bojórquez, Juan Pablo
  • Leech, Donal
  • Sabaté Vizcarra, Neus
This work addresses the development of a compact paper-based enzymatic microfluidic glucose/O2 fuel cell that can operate using a very limited sample volume (≈35 µl) and explores the energy generated by glucose at concentrations typically found in blood samples at physiological conditions (pH 7.4). Carbon paper electrodes combined with a paper sample absorption substrate all contained within a plastic microfluidic casing are used to construct the paper-based fuel cell. The anode catalysts consist of glucose dehydrogenase and [Os(4,4′-dimethoxy-2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator, while the cathode catalysts were bilirubin oxidase and [Os(2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator. The fuel cell delivered a linear power output response to glucose over the range of 2.5–30 mM, with power densities ranging from 20 to 90 µW cm−2. The quantification of the available electrical power as well as the energy density extracted from small synthetic samples allows planning potential uses of this energy to power different sensors and analysis devices in a wide variety of in-vitro applications., Peter Ó Conghaile is thanked for synthesis of the redox polymers. Neus Sabaté acknowledges funding from the European H2020 Framework Programme (Grant Agreement 648518 - SUPERCELL - ERC 2014 CoG). Juan Pablo Esquivel would like to thank the support from Marie Curie International Outgoing Fellowship (APPOCS) within the 7th European Community Framework Programme. F. Javier del Campo acknowledges funding from the Spanish Ministry of Economy through the DADDi2 project (TEC2013-48506-C3). Dónal Leech acknowledges support from Grant number 607793 under the Bioenergy FP7-PEOPLE-2013-ITN Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative self-powered electrochromic biosensors

  • Pellitero, Miguel Aller
  • Guimerà, Anton
  • Kitsara, Maria
  • Villa, Rosa
  • Rubio, Camille
  • Lakard, Boris
  • Doche, Marie-Laure
  • Hihn, Jean-Yves
  • Javier Del Campo, F
Self-powered sensors are analytical devices able to generate their own energy, either from the sample itself or from their surroundings. The conventional approaches rely heavily on silicon-based electronics, which results in increased complexity and cost, and prevents the broader use of these smart systems. Here we show that electrochromic materials can overcome the existing limitations by simplifying device construction and avoiding the need for silicon-based electronics entirely. Electrochromic displays can be built into compact self-powered electrochemical sensors that give quantitative information readable by the naked eye, simply controlling the current path inside them through a combination of specially arranged materials. The concept is validated by a glucose biosensor coupled horizontally to a Prussian blue display designed as a distance-meter proportional to (glucose) concentration. This approach represents a breakthrough for self-powered sensors, and extends the application of electrochromic materials beyond smart windows and displays, into sensing and quantification., Peer reviewed