Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

A Metal-Free and Biotically Degradable Battery for Portable Single-Use Applications

  • Esquivel, Juan Pablo
  • Alday, Perla
  • Ibrahim, Omar A.
  • Fernández, Belén
  • Kjeang, Erik
  • Sabaté, Neus
This article presents a new approach for environmentally benign, low-cost batteries intended for single-use applications. The proposed battery is designed and fabricated using exclusively organic materials such as cellulose, carbon, and wax and features an integrated quinone-based redox chemistry to generate electricity within a compact form factor. This primary capillary flow battery is activated by the addition of a liquid sample and has shown continuous operation up to 100 min with an output voltage that can be conveniently scaled to match the voltage needs of portable electronic devices (1.5–3.0 V). Once depleted, the battery can be disposed of without the need for any recycling facility, as its components are nontoxic and shown to be biotically degradable in a standardized test. The practical utility of the battery is demonstrated by direct substitution of a lithium ion coin cell in a diagnostic application., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paper-based enzymatic microfluidic fuel cell: From a two-stream flow device to a single-stream lateral flow strip

  • González-Guerrero, Maria Jose
  • Campo García, Francisco Javier del
  • Esquivel Bojórquez, Juan Pablo
  • Giroud, Fabien
  • Minteer, Shelley
  • Sabaté Vizcarra, Neus
This work presents a first approach towards the development of a cost-effective enzymatic paper-based glucose/O2 microfluidic fuel cell in which fluid transport is based on capillary action. A first fuel cell configuration consists of a Y-shaped paper device with the fuel and the oxidant flowing in parallel over carbon paper electrodes modified with bioelectrocatalytic enzymes. The anode consists of a ferrocenium-based polyethyleneimine polymer linked to glucose oxidase (GOx/Fc-C6-LPEI), while the cathode contains a mixture of laccase, anthracene-modified multiwall carbon nanotubes, and tetrabutylammonium bromide-modified Nafion (MWCNTs/laccase/TBAB-Nafion). Subsequently, the Y-shaped configuration is improved to use a single solution containing both, the anolyte and the catholyte. Thus, the electrolytes pHs of the fuel and the oxidant solutions are adapted to an intermediate pH of 5.5. Finally, the fuel cell is run with this single solution obtaining a maximum open circuit of 0.55 ± 0.04 V and a maximum current and power density of 225 ± 17 μA cm−2 and 24 ± 5 μW cm−2, respectively. Hence, a power source closer to a commercial application (similar to conventional lateral flow test strips) is developed and successfully operated. This system can be used to supply the energy required to power microelectronics demanding low power consumption., F. Javier del Campo acknowledges funding from the Spanish Ministry of Economy through the DADDi2 project (TEC2013-48506-C3). Juan Pablo Esquivel would like to thank the support from Marie Curie International Outgoing Fellowship (APPOCS-328144) within the 7th European Community Framework Programme. Shelley D. Minteer and Fabien Giroud would like to thank the National Science Foundation (CHE-1057597) for funding. Neus Sabaté acknowledges funding from the European H2020 Framework Programme (Grant Agreement 648518 - SUPERCELL - ERC 2014 CoG)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paper-based microfluidic biofuel cell operating under glucose concentrations within physiological range

  • González-Guerrero, Maria Jose
  • Campo García, Francisco Javier del
  • Esquivel Bojórquez, Juan Pablo
  • Leech, Donal
  • Sabaté Vizcarra, Neus
This work addresses the development of a compact paper-based enzymatic microfluidic glucose/O2 fuel cell that can operate using a very limited sample volume (≈35 µl) and explores the energy generated by glucose at concentrations typically found in blood samples at physiological conditions (pH 7.4). Carbon paper electrodes combined with a paper sample absorption substrate all contained within a plastic microfluidic casing are used to construct the paper-based fuel cell. The anode catalysts consist of glucose dehydrogenase and [Os(4,4′-dimethoxy-2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator, while the cathode catalysts were bilirubin oxidase and [Os(2,2′-bipyridine)2(poly-vinylimidazole)10Cl]+ as mediator. The fuel cell delivered a linear power output response to glucose over the range of 2.5–30 mM, with power densities ranging from 20 to 90 µW cm−2. The quantification of the available electrical power as well as the energy density extracted from small synthetic samples allows planning potential uses of this energy to power different sensors and analysis devices in a wide variety of in-vitro applications., Peter Ó Conghaile is thanked for synthesis of the redox polymers. Neus Sabaté acknowledges funding from the European H2020 Framework Programme (Grant Agreement 648518 - SUPERCELL - ERC 2014 CoG). Juan Pablo Esquivel would like to thank the support from Marie Curie International Outgoing Fellowship (APPOCS) within the 7th European Community Framework Programme. F. Javier del Campo acknowledges funding from the Spanish Ministry of Economy through the DADDi2 project (TEC2013-48506-C3). Dónal Leech acknowledges support from Grant number 607793 under the Bioenergy FP7-PEOPLE-2013-ITN Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-use paper-based hydrogen fuel cells for point-of-care diagnostic applications

  • Esquivel Bojórquez, Juan Pablo
  • Buser, R.S.
  • Lim, C.W.
  • Domínguez Fernández, Carlota
  • Rojas, Sergio
  • Yager, Paul
  • Sabaté Vizcarra, Neus
This work demonstrates a stand-alone power source that integrates a paper-based hydrogen fuel cell with a customized chemical heater that produces hydrogen in-situ upon the addition of a liquid. The presented approach operates by capillary action and takes advantage of the hydrogen released as a by-product of an exothermic reaction used in point-of-care diagnostics. The paper-based fuel cell produces a maximum power of 25.8 mW (103.2 mW cm−2), which is suitable for powering a diversity of electrical devices such as commercially available digital pregnancy tests and glucometers. While device shape and dimensions can be customized, here it is shown that the fuel cell can be designed in a compact form factor and footprint comparable to a lateral flow test while providing a remarkable power output. This approach holds great promise for powering portable diagnostics, as the generated electric power could enable device functionalities required for advanced assays, such as device timing, actuation, and signal quantification. Part of the same liquid sample that is to be analyzed (urine, saliva, water, etc) could be used to trigger the hydrogen generation and start the fuel cell operation., J.P. Esquivel acknowledges support from Marie Curie International Outgoing Fellowship (APPOCS - GA.328144) within the 7th European Community Framework Programme. J. Buser and P. Yager were supported by a grant from DARPA DSO/BTO--HR0011-11-2-0007, awarded to Yager at the University of Washington. P. Yager was supported in part by funds from the Department of Bioengineering at the University of Washington. S. Rojas acknowledges financial support from project ENE2013-42322R. N. Sabaté would like to thank financial support received from ERC Consolidator Grant (SUPERCELL - GA.648518)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Metal-Free and Biotically Degradable Battery for Portable Single-Use Applications

  • Esquivel, Juan Pablo
  • Alday, Perla
  • Ibrahim, Omar A.
  • Fernández, Belén
  • Kjeang, Erik
  • Sabaté, Neus
This article presents a new approach for environmentally benign, low-cost batteries intended for single-use applications. The proposed battery is designed and fabricated using exclusively organic materials such as cellulose, carbon, and wax and features an integrated quinone-based redox chemistry to generate electricity within a compact form factor. This primary capillary flow battery is activated by the addition of a liquid sample and has shown continuous operation up to 100 min with an output voltage that can be conveniently scaled to match the voltage needs of portable electronic devices (1.5–3.0 V). Once depleted, the battery can be disposed of without the need for any recycling facility, as its components are nontoxic and shown to be biotically degradable in a standardized test. The practical utility of the battery is demonstrated by direct substitution of a lithium ion coin cell in a diagnostic application., info:eu-repo/semantics/publishedVersion