Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Sensores de fibra óptica basados en películas delgadas con nanopartículas metálicas, Optical fiber sensors based on thin films with metallic nanoparticles

  • Martínez Hernández, María Elena
El estudio del nanoensamblado de nanopartículas metálicas sobre fibra ópticaha contribuido al desarrollo de sensores con mayor sensibilidad y eficiencia. Las aplicaciones que se pueden obtener en este campo pueden variar en función de ciertos parámetros como el tipo de nanopartícula metálica, ruta de síntesis, set-up o técnica de nanoensamblado. Esta tesis se centra en la síntesis de nanopartículas metálicas de oro (AuNPs) y plata (AgNPs) y su posterior nanoensamblado en películas delgadas usando las técnicas Layer-by-Layer Embedding (LbL-E) y el proceso de In-Situ Synthesis (ISS), para el desarrollo de sensores de fibra óptica. Este trabajo se encuentra dividido en tres bloques,el primero se centra en el uso de la técnica LbL-E para el desarrollo de sensores plasmónicos de fibra óptica para la detección de parámetros químicos. En segundo lugar, la técnica ISS se ha utilizado como alternativa parala fabricación de un nuevo dispositivo sensor de humedad basado en una cavidad interferométrica de Fabry-Perot en puntade una fibra óptica. Por último, se compara los efectos sobre la sensibilidad de los Tilted Fiber Bragg Grating (TFBG) al índice de refracción externo al utilizar ambas técnicas (ISS y LbL-E) para el nanoensamblaje de AuNPs., The study of the nanoassembly of metallic nanoparticles on optical fiber has contributed to the development of sensors with greater sensitivity and efficiency. The applications that can be obtained in this field may vary depending on certain parameters such as the type of metallic nanoparticle, synthesis route, set-up or nanoassembly technique. This thesis focuses on the synthesis of metallic gold (AuNPs) and silver (AgNPs) nanoparticles and their subsequent nanoassembly in thin films using Layer-by-Layer Embedding (LbL-E) technique and the In-Situ synthesis (ISS) process, for the development of fiber optic sensors. This work is divided into three blocks. The first focuses on using the LbL-E technique to develop fiber optic plasmonic sensors for the detection of chemical parameters. Secondly, the ISS technique has been used as an alternative for fabricating a new humidity sensor device based on a Fabry-Perot interferometric cavity at the end of an optical fiber. Finally, the effects on the sensitivity of Tilted Fiber Bragg Gratings to the external refractive index when using both techniques (ISS and LbL-E) for the nanoassembly of AuNPs are compared., The development of this work has been possible thanks to the Public University of Navarre (UPNA) and by the sponsoring of the Spanish Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) under the Projects TEC2016-79367-C2-2-R and PID2019-106070RB-I00., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Contribution to the development of optical fibre sensors based on microstructured optical fibres to detect gases and volatile organic compounds, Contribución al desarrollo de sensores de fibra óptica basados en fibras micro estructuradas para la detección de gases y compuestos orgánicos volátiles

  • López Torres, Diego
Desde la primera publicación relacionada con las fibras micro estructuradas (MOFs), el desarrollo de sensores basados en fibra óptica (OFSs), que utilizan este tipo de fibras, se ha visto incrementado atrayendo el interés de numerosos grupos de investigación debido al importante papel que juegan en numerosas aplicaciones. Debido a sus propiedades y estructuras únicas, las MOFs son muy útiles en aplicaciones ópticas de sensado, especialmente de gases y compuestos orgánicos volátiles (VOCs). Por estas razones, esta tesis doctoral propone la utilización de este tipo de fibras para generar y desarrollar nuevas estructuras y montajes, capaces de detectar estos parámetros, gases y VOCs. Además, se han realizado diferentes estudios y se han utilizado diferentes técnicas (destacando la transformada rápida de Fourier (FFT) y la multiplexación WDM…), para mejorar las características de los sensores, intentando conseguir de esta manera que el sistema final fuera lo más competitivo posible., Since the first publications related to Microstructured Optical Fibres (MOFs), the development of Optical Fibre Sensors (OFSs), based on this type of fibres, has been increased attracting the interest of many research groups because of the important role that they play in diverse applications. Due to their unique geometric structures and features, MOFs are very useful for optical sensing applications, especially gases and Volatile Organic Compounds (VOC) sensing. Taking it into account, this PhD. work proposes the utilization of MOFs to carry out and to develop new structures and set-ups capable to detect these parameters, gases and VOCs. Moreover, different studies and techniques, such as Fast Fourier Transform (FFT) or WDM multiplexing, have been used with the aim of improving the features of the sensors trying to make the final system as competitive as possible., La realización de este trabajo ha sido posible gracias a las aportaciones económicas recibidas por parte de la Universidad Pública de Navarra (UPNA), así como del patrocinio de la UPNA y del Ministerio de Economía y Competitividad, a través de los proyectos CICYT fondos TEC2013-43679-R, TEC2016-79367-C2-2-R. Este trabajo fue posible también gracias a los proyectos concedidos por el Gobierno de Navarra, con referencia 2016/PI012 EXCELSEN y a la financiación otorgada por la Fundación CAN a través de los proyectos CAN2015-70221 y BINACS: Bio Inspired Nanocoatings for Cellular Scaffolds., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Luminescence-based optical fiber oxygen sensors fabricated by means of layer-by-layer nano-assembly

  • Acha Morrás, Nerea de
Over the last decades, luminescence quenching has been established as a widespread technique for gaseous oxygen monitoring in a broad range of applications. Thus, considerable effort has been made to manufacture luminescent oxygen sensors. The performances of such sensors are determined by the oxygen indicator and the matrix that entraps this indicator as well. In spite of its versatility for fine-tuning the final features of nanostructures, the Layer-by-Layer nano-assembly technique has been rarely studied for fabricating these sensors. This could be explained by the fact that most of the optically stable and highly sensitive oxygen indicators are not water soluble. The main objective of this work is to combine these detection and deposition techniques with optical fiber setups, for the fabrication and characterization of luminescent optical fiber oxygen sensors fabricated by Layer-by-Layer nano-assembly., This PhD thesis has been possible thanks to the pre-doctoral fellowship (reference BES-2014-069692) funded by the Spanish Ministry of Economy and Competitiveness through the TEC2013-43679-R project. This work has also been supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERDF-FEDER) through the TEC2016-79367-C2-2-R project and by the Government of Navarra Research Grants through the project Excelsen., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)