Pasar al contenido principal

SENSORES FOTONICOS INTEGRADOS EN PLATAFORMA MICROFLUIDICA PARA LA MEDIDA DE CONTAMINANTES PRIORITARIOS EN AGUA

TEC2016-79367-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Partially coated long period fiber Bragg gratings in multicore optical fibers

  • Barrera, David
  • Goicoechea Fernández, Javier
  • Madrigal, Javier
  • González Larequi, Marta
  • Arregui San Martín, Francisco Javier
  • Sales, Salvador
Multicore optical fibers (MCFs) have attracted considerable interest in the last years due to their potential in many applications including broadband communications, microwave photonics, and optical sensing [1,2]. In optical sensing, MCFs has been used in the past for implementing curvature and shape sensors [3]. However, the potential of MCFs for optical sensing is not limited to mechanical sensors and they can be used for implementing other types of sensors. In this paper, we investigate the use of MCFs for external refractive index (RI) sensing. We use LPGs inscribed in the cores of the fiber to detect changes in the external refractive index. Partially coating the surface of the optical fiber we can modify the sensitivity of the cores., This work was supported by the Ministry of Economy and Competitiveness under the projects DIMENSION TEC2017-88029-R and TEC2016-79367-C2-2-R (AEI/FEDER), the support of FINESSE the European Union¿s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action grant agreement n° 722509, and the support of the Generalitat Valenciana under the grant APOSTD/2016/015.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Enhancement of the sensitivity of a volatile organic compounds MOF sensor by means of its structure

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
In this paper, we experimentally compare several core structures of Microstructured Optical Fibers (MOFs) for low-finesse Fabry-Pérot (FP) sensors. These sensors are designed for Volatile Organic Compounds (VOCs) measurements. We deposit Indium Tin Oxide (ITO) thin films by sputtering on the MOFs and different optical phase responses of the FP were measured for saturated atmospheres of ethanol. The sensitivity of the developed sensors is demonstrated to depend on the geometry and the dimensions of the MOF-cores. The sensors show recovery times under 100 s and the baselines are fully recovered after exposure to VOC., This work was supported by the research grant TEC2016-79367-C2-2-R and TEC 2016-76021-C2-1-R (AEI/FEDER, UE) as well as Public University of Navarre program PhD grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Sensores de fibra óptica basados en películas delgadas con nanopartículas metálicas, Optical fiber sensors based on thin films with metallic nanoparticles

  • Martínez Hernández, María Elena
El estudio del nanoensamblado de nanopartículas metálicas sobre fibra ópticaha contribuido al desarrollo de sensores con mayor sensibilidad y eficiencia. Las aplicaciones que se pueden obtener en este campo pueden variar en función de ciertos parámetros como el tipo de nanopartícula metálica, ruta de síntesis, set-up o técnica de nanoensamblado. Esta tesis se centra en la síntesis de nanopartículas metálicas de oro (AuNPs) y plata (AgNPs) y su posterior nanoensamblado en películas delgadas usando las técnicas Layer-by-Layer Embedding (LbL-E) y el proceso de In-Situ Synthesis (ISS), para el desarrollo de sensores de fibra óptica. Este trabajo se encuentra dividido en tres bloques,el primero se centra en el uso de la técnica LbL-E para el desarrollo de sensores plasmónicos de fibra óptica para la detección de parámetros químicos. En segundo lugar, la técnica ISS se ha utilizado como alternativa parala fabricación de un nuevo dispositivo sensor de humedad basado en una cavidad interferométrica de Fabry-Perot en puntade una fibra óptica. Por último, se compara los efectos sobre la sensibilidad de los Tilted Fiber Bragg Grating (TFBG) al índice de refracción externo al utilizar ambas técnicas (ISS y LbL-E) para el nanoensamblaje de AuNPs., The study of the nanoassembly of metallic nanoparticles on optical fiber has contributed to the development of sensors with greater sensitivity and efficiency. The applications that can be obtained in this field may vary depending on certain parameters such as the type of metallic nanoparticle, synthesis route, set-up or nanoassembly technique. This thesis focuses on the synthesis of metallic gold (AuNPs) and silver (AgNPs) nanoparticles and their subsequent nanoassembly in thin films using Layer-by-Layer Embedding (LbL-E) technique and the In-Situ synthesis (ISS) process, for the development of fiber optic sensors. This work is divided into three blocks. The first focuses on using the LbL-E technique to develop fiber optic plasmonic sensors for the detection of chemical parameters. Secondly, the ISS technique has been used as an alternative for fabricating a new humidity sensor device based on a Fabry-Perot interferometric cavity at the end of an optical fiber. Finally, the effects on the sensitivity of Tilted Fiber Bragg Gratings to the external refractive index when using both techniques (ISS and LbL-E) for the nanoassembly of AuNPs are compared., The development of this work has been possible thanks to the Public University of Navarre (UPNA) and by the sponsoring of the Spanish Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) under the Projects TEC2016-79367-C2-2-R and PID2019-106070RB-I00., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Luminescence-based optical sensors fabricated by means of the layer-by-layer nano-assembly technique

  • Acha Morrás, Nerea de
  • Elosúa Aguado, César
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
Luminescence-based sensing applications range from agriculture to biology, including medicine and environmental care, which indicates the importance of this technique as a detection tool. Luminescent optical sensors are required to be highly stable, sensitive, and selective, three crucial features that can be achieved by fabricating them by means of the layer-by-layer nano-assembly technique. This method permits us to tailor the sensors0 properties at the nanometer scale, avoiding luminophore aggregation and, hence, self-quenching, promoting the diffusion of the target analytes, and building a barrier against the undesired molecules. These characteristics give rise to the fabrication of custom-made sensors for each particular application., This work was supported by the Spanish State Research Agency (AEI) through the TEC2016- 79367-C2-2-R project and the European Regional Development Fund (ERDF-FEDER). Nerea de Acha would also like to acknowledge her pre-doctoral fellowship (reference BES-2014-069692) funded by the Spanish Ministry of Economy and Competitiveness through the TEC2013-43679-R project.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Femtomolar detection by nanocoated fiber label-free biosensors

  • Chiavaioli, Francesco
  • Zubiate Orzanco, Pablo
  • Del Villar, Ignacio
  • Ruiz Zamarreño, Carlos
  • Giannetti, Ambra
  • Tombelli, Sara
  • Trono, Cosimo
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
  • Baldini, Francesco
The advent of optical fibre-based biosensors combined with that of nanotechnologies has provided an oppor-tunity for developing in situ, portable, lightweight, versatile and high-performance optical sensing platforms. We report on the generation of lossy mode resonances by the deposition of nm-thick metal oxide films on optical fibres, which makes it possible to measure precisely and accurately the changes in optical properties of the fibre-surrounding medium with very high sensitivity compared to other technology platforms, such as long period gratings or surface plasmon resonances, the gold standard in label-free and real-time biomolecular interaction analysis. This property, combined with the application of specialty structures such as D-shaped fibres, permits enhancing the light-matter interaction. SEM and TEM imaging together with X-EDS tool have been utilised to characterise the two films used, i.e. indium tin oxide and tin dioxide. More-over, the experimental transmission spectra obtained after the deposition of the nanocoatings have been numerically cor-roborated by means of wave propagation methods. With the use of a conventional wavelength interrogation system and ad-hoc developed microfluidics, the shift of the lossy mode resonance can be reliably recorded in response to very low analyte concentrations. Repeated experiments confirm a big leap in performance thanks to the capability to detect femtomolar concentrations in human serum, improving the detection limit by three orders of magnitude when compared with other fibre-based configurations. The biosensor has been regenerated several times by injecting sodium dodecyl sul-phate, which proves the capability of sensor to be reused., This work was supported by the European Community for theproject Hemospec (FP7-611682), by the National ResearchCouncil of Italy (CNR) for the Short Term Mobility program2017, by the Government of Navarra (project no. 72/2015)and by the Spanish Agencia Estatal de Investigación (AEI) andEuropean Regional Development Fund (FEDER) (TEC2016-78047-R, TEC2016-79367-C2-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Lossy mode resonances generated in planar configuration for two-parameter sensing

  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
This work shows a new sensor structure for simultaneous measurement of two parameters, temperature and refractive index. The optical configuration consists of incidence of light on the edge of a soda-lime coverslip fully coated with a CuO thin film and partially coated with a PDMS thick layer. This planar configuration permitted to generate two separated lossy mode resonances (LMRs): one centered at 600 nm and the other at 1000 nm. The second resonance is induced by the PDMS layer and it can be used to measure the temperature due to its high thermo-optic coefficient (the sensitivity is -1.75 nm/°C in the temperature range from 20 to 40 °C), whereas the first resonance is used for sensing refractive index with sensitivity of 1460 nm/RIU in the refractive index range from 1.3328 and 1.37. Finally, a calibration test was carried out using a calibrated oil series with refractive index ranging from 1.33 to 1.36. This work demonstrates the possibility of generating multiples resonances in a single structure as simple as a coverslip, which can be used as a multi-parameter interchangeable sensor, especially suitable for biological applications or the detection of heavy metals in water., This work was supported by Spanish Agencia Estatal de Investigación (AEI). Fondo Europeo de Desarrollo Regional (FEDER) TEC2016-79367-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Lossy mode resonance optical sensors based on indium-gallium-zinc oxide thin film

  • Ozcariz Celaya, Aritz
  • Dominik, Magdalena
  • Smietana, Mateusz
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Arregui San Martín, Francisco Javier
This work discusses an application of electrically conductive and optically transparent indium-gallium-zinc oxide (IGZO) thin films for fabrication of lossy mode resonance (LMR) based optical fiber refractometers. The films have been deposited on both 200 μm in diameter multimode fused silica fiber and D-shaped fiber structure. A sensitivity of 12,929 nm/RIU was obtained in the refractive index range between 1.39 and 1.42. In case of D-shaped fiber structure the effect of polishing depth on the LMR phenomenon has also been studied., This work was supported in part by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-79367-C2-2-R, TEC2016-78047-R), as well as by the Spanish Ministry of Education (FPU15/05663 grant) and the Government of Navarra 2016/PI044 NANOSEN, 0C023/024 BIOPTSENS and 64/2015 research funds. Support from National Science Centre, Poland within grant No. 2014/14/E/ST7/00104 is also acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Peculiarities of the structural and optical properties of rare-earth-doped phosphate glasses for temperature sensing applications

  • Elisa, M.
  • Iordache, S.M.
  • Iordache, A.M.
  • Vasiliu, Ileana Cristina
  • Grigorescu, C.E.A.
  • Sava, Bogdan Alexandru
  • Boroica, L.
  • Filip, A.V.
  • Dinca, M. C.
  • Bartha, Cristina
  • Acha Morrás, Nerea de
  • Elosúa Aguado, César
Eu, Er, Yb-Er, and Dy-doped phosphate glasses were prepared by a wet-route processing of chemical precursors followed by melt-quenching and annealing. XRD measurements highlighted the amorphous nature of the investigated glasses. UV-Vis absorption spectra revealed peaks specific to f-f electronic transitions of the doping ions whereas FTIR and Raman spectroscopy proved the vitreous network forming role of phosphorous pentoxide. Luminescence spectra in the Vis domain, at RT, showed emission bands characteristic to the ion transitions from the excited states to the ground state. The luminescence spectra collected in the 25-160°C range exhibited a decrease of the emission intensity with temperature rise. In the case of Eu and Dy-doped glasses a relatively small decrease of the emission intensity with temperature is observed by comparison with Er and, respectively, Yb-Er-doped glass where a significant change of the emission intensity is noticed, which recommends the latter as promising candidate for sensing devices., This work was supported by UEFISCDI (Executive Unity for Financing of Higher Education, Research and Innovation), Core Program, contracts no. 16N/2019, 18N/2019, and 21N/2019, project PN-III-P1-1.2-PCCDI-2017-0871/contract 47PCCDI/2018, project PN-III-P1-1.2-PCCDI-2017-0619/contract 42PCCDI/2018, by the Ministry of Research and Innovation through Program I - Development of the National R & D System, Subprogram 1.2 - Institutional Performance - Projects for Excellence Financing in RDI, contract no.19PFE/2018, and by Spanish State Research Agency and Spanish Ministry of Economy and Competitiveness through the project TEC2016-79367-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Lossy mode resonance enabling ultra-low detection limit for fibre-optic biosensors (INVITED)

  • Chiavaioli, Francesco
  • Giannetti, Ambra
  • Tombelli, Sara
  • Trono, Cosimo
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Arregui San Martín, Francisco Javier
  • Baldini, Francesco
The combination of optical fibre-based biosensors with nanotechnologies is providing the opportunity for the development of in situ, portable, lightweight, versatile and high-sensitivity optical sensing platforms. We report on the generation of lossy mode resonances (LMRs) by means of the deposition of nm-thick SnO2 film on optical fibres. This allows measuring precisely and accurately the changes in refractive index of the fibre-surrounding medium with very high sensitivity compared to other optical technology platforms, such as long period grating or surface plasmon resonance. This approach, mixed with the use of specialty fiber structures such as Dshaped fibres, allows improving the light-matter interaction in strong way. Different imaging systems, i.e. SEM and TEM along with X-EDS tool, have been used to study the optical features of the fiber coating. The shift of the LMR has been monitored in real-time thanks to conventional wavelength interrogation system and ad hoc developed microfluidics. A big leap in performance has been attained by detecting femtomolar concentrations in human serum. The biosensor reusability has been also tested by using a solution of sodium dodecyl sulphate., This work was supported by the National Research Council of Italy (CNR) for the Short Term Mobility program 2017, by the Government of Navarra (project no. 72/2015) and by the Spanish Agencia Estatal de Investigacion (AEI) and European Regional Development Fund (FEDER) (TEC2016-78047-R,TEC2016-79367-C2-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Aluminum doped zinc oxide (AZO) coated optical fiber LMR refractometers. An experimental demonstration

  • Ozcariz Celaya, Aritz
  • Piña-Azamar, Dafne A.
  • Ruiz Zamarreño, Carlos
  • Domínguez Cruz, René
  • Arregui San Martín, Francisco Javier
This work presents the experimental demonstration of lossy mode resonance generation by means of aluminum doped zinc oxide thin-films. The use of such material may allow to optimize the performance of LMR-based sensors, obtaining good sensitivity at lower costs than other overlays, such as those including indium. The refractometric response of the fabricated devices is explored in different spectral regions. One refractometer working in the near infrared region was fabricated, obtaining a sensitivity of 2280 nm/RIU. A second refractometer working in the visible light spectrum was also fabricated. This second device allows to observe rough refractive index variations with the naked eye as a change of the color of the light propagating through the fiber, simplifying the setup needed for its use., This work was partly supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-79367-C2-2-R, TEC2016-78047-R ). The authors would also like to thanks the Spanish Ministry of Education (FPU15/05663 grant) and the Government of Navarra 0C023/024 BIOPTSENS and 64/2015 research funds. Dafne A. Piña-Azamar thanks CONACYT for scholarship assigned and PFCE-UAT 2016 project for the financial support to carry out this work.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Dual-cavity fiber fabry-perot interferometer coated with SnO2for relative humidity and temperature sensing

  • Domínguez Flores, Carmen E.
  • Rodríguez-Quiroz, Osvaldo
  • Monzón-Hernández, David
  • Ascorbe Muruzabal, Joaquín
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
An optical fiber tip interferometer for the measurement of relative humidity (RH) and temperature is proposed. The optical fiber structure used, a dual-cavity optical fiber Fabry-Perot interferometer (DFFPI), is simply-to-fabricate, compact, and robust. The reflectance (RDFFPI) of the interferometer is sensitive to the refractive index (RI) and temperature of the external medium. Consequently, when the cross-section of the fiber tip was coated with a SnO 2 thin film, whose RI changes according to the humidity of the surrounding ambient, the measurement of the RH was possible. An increment of the RH produced a decrement of RI of the SnO 2 thin film, then the reflectance of the fiber tip end-face diminished, and this produced a decrement of the visibility of the interference fringes. The analysis of the RDFFPI was carried out in the Fourier domain, using a novel processing method it was possible to establish that the amplitude of two peaks of Fourier spectrum changed at a ratio of 39.49 × 10 -3 %RH -1 in the range of 40 to 90 RH%. On the other hand, the temperature of the humidity chamber was monitored, from 25 to 60 °C at a fixed RH%, by analyzing the phase shift of the interference pattern produced by the changes in the optical path length of the cavities. The good sensitivity, stability, reproducibility, and compactness of the fiber tip RH sensor make this proposal very appealing in a wide range of applications., This work was supported in part by the Consejo Nacional de Ciencia y Tecnología (CONACyT) from Mexico through the CIENCIA BÁSICA under Project 257046 and Project LN-293442, and in part by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under Grant TEC2016-79367-C2-2-R. The work of Carmen E. Domínguez-Flores and Osvaldo Rodríguez-Quiroz were supported by the CONACyT for Ph.D. Scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optical fiber sensors based on gold nanorods embedded in polymeric thin films

  • Urrutia Azcona, Aitor
  • Goicoechea Fernández, Javier
  • Rivero Fuente, Pedro J.
  • Pildain Lería, Ander
  • Arregui San Martín, Francisco Javier
In this work, we present a study about the generation and analysis of optical resonances caused by gold nanorods (GNRs) embedded in films. GNRs were embedded in polymeric thin films using the Layerby-Layer nanoassembly (LbL) deposition technique. Polymer/GNRs thin films of different thicknesses were deposited on the surface of cladding removed optical fibers for sensing. The spectral responses of the optical fiber sensors were monitored during the build-up of the thin films. The generation of two Localized Surface Plasmon Resonances (LSPRs) associated to the GNRs was observed in thinner coatings. These devices with around 12 polymer/GNRs bilayers were characterized as refractometers, providing an intensity-based sensitivity up to 75.69 dB/RIU. For thicker polymer/GNRs overlays, both LSPRs bands were also generated and, additionally, it was observed a new Lossy Mode Resonance (LMR) band due to modes coupled to the sensitive coating. The dependence of these three resonance bands with the surrounding refractive index was studied. Finally, these sensors were tested in a climatic chamber in the 20-90% relative humidity (RH) range and the LMR showed a good sensitivity to RH changes while the LSPR bands remained very stable in comparison. Results showed an excellent sensitivity of 11.2 nm/%RH for the LMR, confirming the potential of this type of optical fiber sensor based on the combination of LSPRs and LMRs bands., This work was supported in part by the Spanish Ministry of Economy and Competitiveness - CICYT-FEDER TEC2013-43679R, TEC2016-79367-C2-2-R, TEC2016-78047-R and TRA2013-48603-C4-1-R Research Grants, and a UPNA post-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Interdigital concept in photonic sensors based on an array of lossy mode resonances

  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Multi-parameter detection is key in the domain of sensors. Here it is demonstrated that an indium tin oxide (ITO) nanocoating can be used to generate multiple lossy mode resonances (LMRs) in the optical spectrum. To achieve this, a nanocoating with a gradient in thickness is generated on the surface of a planar waveguide, permitting broadening of the LMR because the position of an LMR in the optical spectrum is directly related to the nanocoating thickness. The nanocoating with a gradient in thickness contributes multiple LMRs, each one centred at a different wavelength. With a further etching or deposition using a mask, a pattern of deposited and non-deposited regions can be created, resulting in isolation of the LMRs by preventing LMR overlap. This enables tracking of each central wavelength separately, which can be tuned through control of the gradient or nanocoating pattern. The array of LMR-based sensors is a photonics analogue to the interdigital concept in electronics, enabling multiple resonances to be used for multiparameter sensing., The authors would like to acknowledge the partial support to the Spanish Ministry of Economy and Competitiveness TEC2016-79367-C2-2-R and PID2019-106231RB-I00 research fund, the STARDUST project (European Commission) and the pre-doctoral research grants of the Public University of Navarra.